4.2 Bash Builtin Commands

This section describes builtin commands which are unique to or have been extended in Bash. Some of these commands are specified in the POSIX standard.

alias

alias [-p] [name[=value] …]

Without arguments or with the -p option, alias prints the list of aliases on the standard output in a form that allows them to be reused as input. If arguments are supplied, an alias is defined for each name whose value is given. If no value is given, the name and value of the alias is printed. Aliases are described in Aliases.

bind

bind [-m keymap] [-lpsvPSVX]
bind [-m keymap] [-q function] [-u function] [-r keyseq]
bind [-m keymap] -f filename
bind [-m keymap] -x keyseq:shell-command
bind [-m keymap] keyseq:function-name
bind readline-command

Display current Readline (see Command Line Editing) key and function bindings, bind a key sequence to a Readline function or macro, or set a Readline variable. Each non-option argument is a command as it would appear in a Readline initialization file (see Readline Init File), but each binding or command must be passed as a separate argument; e.g., ‘"\C-x\C-r":re-read-init-file’.

Options, if supplied, have the following meanings:

-m keymap

Use keymap as the keymap to be affected by the subsequent bindings. Acceptable keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. vi is equivalent to vi-command; emacs is equivalent to emacs-standard.

-l

List the names of all Readline functions.

-p

Display Readline function names and bindings in such a way that they can be used as input or in a Readline initialization file.

-P

List current Readline function names and bindings.

-v

Display Readline variable names and values in such a way that they can be used as input or in a Readline initialization file.

-V

List current Readline variable names and values.

-s

Display Readline key sequences bound to macros and the strings they output in such a way that they can be used as input or in a Readline initialization file.

-S

Display Readline key sequences bound to macros and the strings they output.

-f filename

Read key bindings from filename.

-q function

Query about which keys invoke the named function.

-u function

Unbind all keys bound to the named function.

-r keyseq

Remove any current binding for keyseq.

-x keyseq:shell-command

Cause shell-command to be executed whenever keyseq is entered. When shell-command is executed, the shell sets the READLINE_LINE variable to the contents of the Readline line buffer and the READLINE_POINT variable to the current location of the insertion point. If the executed command changes the value of READLINE_LINE or READLINE_POINT, those new values will be reflected in the editing state.

-X

List all key sequences bound to shell commands and the associated commands in a format that can be reused as input.

The return status is zero unless an invalid option is supplied or an error occurs.

builtin

builtin [shell-builtin [args]]

Run a shell builtin, passing it args, and return its exit status. This is useful when defining a shell function with the same name as a shell builtin, retaining the functionality of the builtin within the function. The return status is non-zero if shell-builtin is not a shell builtin command.

caller

caller [expr]

Returns the context of any active subroutine call (a shell function or a script executed with the . or source builtins).

Without expr, caller displays the line number and source filename of the current subroutine call. If a non-negative integer is supplied as expr, caller displays the line number, subroutine name, and source file corresponding to that position in the current execution call stack. This extra information may be used, for example, to print a stack trace. The current frame is frame 0.

The return value is 0 unless the shell is not executing a subroutine call or expr does not correspond to a valid position in the call stack.

command

command [-pVv] command [arguments …]

Runs command with arguments ignoring any shell function named command. Only shell builtin commands or commands found by searching the PATH are executed. If there is a shell function named ls, running ‘command ls’ within the function will execute the external command ls instead of calling the function recursively. The -p option means to use a default value for PATH that is guaranteed to find all of the standard utilities. The return status in this case is 127 if command cannot be found or an error occurred, and the exit status of command otherwise.

If either the -V or -v option is supplied, a description of command is printed. The -v option causes a single word indicating the command or file name used to invoke command to be displayed; the -V option produces a more verbose description. In this case, the return status is zero if command is found, and non-zero if not.

declare

declare [-aAfFgilnrtux] [-p] [name[=value] …]

Declare variables and give them attributes. If no names are given, then display the values of variables instead.

The -p option will display the attributes and values of each name. When -p is used with name arguments, additional options, other than -f and -F, are ignored.

When -p is supplied without name arguments, declare will display the attributes and values of all variables having the attributes specified by the additional options. If no other options are supplied with -p, declare will display the attributes and values of all shell variables. The -f option will restrict the display to shell functions.

The -F option inhibits the display of function definitions; only the function name and attributes are printed. If the extdebug shell option is enabled using shopt (see The Shopt Builtin), the source file name and line number where the function is defined are displayed as well. -F implies -f.

The -g option forces variables to be created or modified at the global scope, even when declare is executed in a shell function. It is ignored in all other cases.

The following options can be used to restrict output to variables with the specified attributes or to give variables attributes:

-a

Each name is an indexed array variable (see Arrays).

-A

Each name is an associative array variable (see Arrays).

-f

Use function names only.

-i

The variable is to be treated as an integer; arithmetic evaluation (see Shell Arithmetic) is performed when the variable is assigned a value.

-l

When the variable is assigned a value, all upper-case characters are converted to lower-case. The upper-case attribute is disabled.

-n

Give each name the nameref attribute, making it a name reference to another variable. That other variable is defined by the value of name. All references and assignments to name, except for changing the -n attribute itself, are performed on the variable referenced by name’s value. The -n attribute cannot be applied to array variables.

-r

Make names readonly. These names cannot then be assigned values by subsequent assignment statements or unset.

-t

Give each name the trace attribute. Traced functions inherit the DEBUG and RETURN traps from the calling shell. The trace attribute has no special meaning for variables.

-u

When the variable is assigned a value, all lower-case characters are converted to upper-case. The lower-case attribute is disabled.

-x

Mark each name for export to subsequent commands via the environment.

Using ‘+’ instead of ‘-’ turns off the attribute instead, with the exceptions that ‘+a’ may not be used to destroy an array variable and ‘+r’ will not remove the readonly attribute. When used in a function, declare makes each name local, as with the local command, unless the -g option is used. If a variable name is followed by =value, the value of the variable is set to value.

When using -a or -A and the compound assignment syntax to create array variables, additional attributes do not take effect until subsequent assignments.

The return status is zero unless an invalid option is encountered, an attempt is made to define a function using ‘-f foo=bar’, an attempt is made to assign a value to a readonly variable, an attempt is made to assign a value to an array variable without using the compound assignment syntax (see Arrays), one of the names is not a valid shell variable name, an attempt is made to turn off readonly status for a readonly variable, an attempt is made to turn off array status for an array variable, or an attempt is made to display a non-existent function with -f.

echo

echo [-neE] [arg …]

Output the args, separated by spaces, terminated with a newline. The return status is 0 unless a write error occurs. If -n is specified, the trailing newline is suppressed. If the -e option is given, interpretation of the following backslash-escaped characters is enabled. The -E option disables the interpretation of these escape characters, even on systems where they are interpreted by default. The xpg_echo shell option may be used to dynamically determine whether or not echo expands these escape characters by default. echo does not interpret -- to mean the end of options.

echo interprets the following escape sequences:

\a

alert (bell)

\b

backspace

\c

suppress further output

\e

\E

escape

\f

form feed

\n

new line

\r

carriage return

\t

horizontal tab

\v

vertical tab

\\

backslash

\0nnn

the eight-bit character whose value is the octal value nnn (zero to three octal digits)

\xHH

the eight-bit character whose value is the hexadecimal value HH (one or two hex digits)

\uHHHH

the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value HHHH (one to four hex digits)

\UHHHHHHHH

the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value HHHHHHHH (one to eight hex digits)

enable

enable [-a] [-dnps] [-f filename] [name …]

Enable and disable builtin shell commands. Disabling a builtin allows a disk command which has the same name as a shell builtin to be executed without specifying a full pathname, even though the shell normally searches for builtins before disk commands. If -n is used, the names become disabled. Otherwise names are enabled. For example, to use the test binary found via $PATH instead of the shell builtin version, type ‘enable -n test’.

If the -p option is supplied, or no name arguments appear, a list of shell builtins is printed. With no other arguments, the list consists of all enabled shell builtins. The -a option means to list each builtin with an indication of whether or not it is enabled.

The -f option means to load the new builtin command name from shared object filename, on systems that support dynamic loading. The -d option will delete a builtin loaded with -f.

If there are no options, a list of the shell builtins is displayed. The -s option restricts enable to the POSIX special builtins. If -s is used with -f, the new builtin becomes a special builtin (see Special Builtins).

The return status is zero unless a name is not a shell builtin or there is an error loading a new builtin from a shared object.

help

help [-dms] [pattern]

Display helpful information about builtin commands. If pattern is specified, help gives detailed help on all commands matching pattern, otherwise a list of the builtins is printed.

Options, if supplied, have the following meanings:

-d

Display a short description of each pattern

-m

Display the description of each pattern in a manpage-like format

-s

Display only a short usage synopsis for each pattern

The return status is zero unless no command matches pattern.

let

let expression [expression …]

The let builtin allows arithmetic to be performed on shell variables. Each expression is evaluated according to the rules given below in Shell Arithmetic. If the last expression evaluates to 0, let returns 1; otherwise 0 is returned.

local

local [option] name[=value] …

For each argument, a local variable named name is created, and assigned value. The option can be any of the options accepted by declare. local can only be used within a function; it makes the variable name have a visible scope restricted to that function and its children. The return status is zero unless local is used outside a function, an invalid name is supplied, or name is a readonly variable.

logout

logout [n]

Exit a login shell, returning a status of n to the shell’s parent.

mapfile

mapfile [-n count] [-O origin] [-s count] [-t] [-u fd]
    [-C callback] [-c quantum] [array]

Read lines from the standard input into the indexed array variable array, or from file descriptor fd if the -u option is supplied. The variable MAPFILE is the default array. Options, if supplied, have the following meanings:

-n

Copy at most count lines. If count is 0, all lines are copied.

-O

Begin assigning to array at index origin. The default index is 0.

-s

Discard the first count lines read.

-t

Remove a trailing newline from each line read.

-u

Read lines from file descriptor fd instead of the standard input.

-C

Evaluate callback each time quantumP lines are read. The -c option specifies quantum.

-c

Specify the number of lines read between each call to callback.

If -C is specified without -c, the default quantum is 5000. When callback is evaluated, it is supplied the index of the next array element to be assigned and the line to be assigned to that element as additional arguments. callback is evaluated after the line is read but before the array element is assigned.

If not supplied with an explicit origin, mapfile will clear array before assigning to it.

mapfile returns successfully unless an invalid option or option argument is supplied, array is invalid or unassignable, or array is not an indexed array.

printf

printf [-v var] format [arguments]

Write the formatted arguments to the standard output under the control of the format. The -v option causes the output to be assigned to the variable var rather than being printed to the standard output.

The format is a character string which contains three types of objects: plain characters, which are simply copied to standard output, character escape sequences, which are converted and copied to the standard output, and format specifications, each of which causes printing of the next successive argument. In addition to the standard printf(1) formats, printf interprets the following extensions:

%b

Causes printf to expand backslash escape sequences in the corresponding argument, except that ‘\c’ terminates output, backslashes in ‘\'’, ‘\"’, and ‘\?’ are not removed, and octal escapes beginning with ‘\0’ may contain up to four digits.

%q

Causes printf to output the corresponding argument in a format that can be reused as shell input.

%(datefmt)T

Causes printf to output the date-time string resulting from using datefmt as a format string for strftime(3). The corresponding argument is an integer representing the number of seconds since the epoch. Two special argument values may be used: -1 represents the current time, and -2 represents the time the shell was invoked. If no argument is specified, conversion behaves as if -1 had been given. This is an exception to the usual printf behavior.

Arguments to non-string format specifiers are treated as C language constants, except that a leading plus or minus sign is allowed, and if the leading character is a single or double quote, the value is the ASCII value of the following character.

The format is reused as necessary to consume all of the arguments. If the format requires more arguments than are supplied, the extra format specifications behave as if a zero value or null string, as appropriate, had been supplied. The return value is zero on success, non-zero on failure.

read

read [-ers] [-a aname] [-d delim] [-i text] [-n nchars]
    [-N nchars] [-p prompt] [-t timeout] [-u fd] [name …]

One line is read from the standard input, or from the file descriptor fd supplied as an argument to the -u option, and the first word is assigned to the first name, the second word to the second name, and so on, with leftover words and their intervening separators assigned to the last name. If there are fewer words read from the input stream than names, the remaining names are assigned empty values. The characters in the value of the IFS variable are used to split the line into words using the same rules the shell uses for expansion (described above in Word Splitting). The backslash character ‘\’ may be used to remove any special meaning for the next character read and for line continuation. If no names are supplied, the line read is assigned to the variable REPLY. The return code is zero, unless end-of-file is encountered, read times out (in which case the return code is greater than 128), a variable assignment error (such as assigning to a readonly variable) occurs, or an invalid file descriptor is supplied as the argument to -u.

Options, if supplied, have the following meanings:

-a aname

The words are assigned to sequential indices of the array variable aname, starting at 0. All elements are removed from aname before the assignment. Other name arguments are ignored.

-d delim

The first character of delim is used to terminate the input line, rather than newline.

-e

Readline (see Command Line Editing) is used to obtain the line. Readline uses the current (or default, if line editing was not previously active) editing settings.

-i text

If Readline is being used to read the line, text is placed into the editing buffer before editing begins.

-n nchars

read returns after reading nchars characters rather than waiting for a complete line of input, but honor a delimiter if fewer than nchars characters are read before the delimiter.

-N nchars

read returns after reading exactly nchars characters rather than waiting for a complete line of input, unless EOF is encountered or read times out. Delimiter characters encountered in the input are not treated specially and do not cause read to return until nchars characters are read.

-p prompt

Display prompt, without a trailing newline, before attempting to read any input. The prompt is displayed only if input is coming from a terminal.

-r

If this option is given, backslash does not act as an escape character. The backslash is considered to be part of the line. In particular, a backslash-newline pair may not be used as a line continuation.

-s

Silent mode. If input is coming from a terminal, characters are not echoed.

-t timeout

Cause read to time out and return failure if a complete line of input (or a specified number of characters) is not read within timeout seconds. timeout may be a decimal number with a fractional portion following the decimal point. This option is only effective if read is reading input from a terminal, pipe, or other special file; it has no effect when reading from regular files. If read times out, read saves any partial input read into the specified variable name. If timeout is 0, read returns immediately, without trying to read and data. The exit status is 0 if input is available on the specified file descriptor, non-zero otherwise. The exit status is greater than 128 if the timeout is exceeded.

-u fd

Read input from file descriptor fd.

readarray

readarray [-n count] [-O origin] [-s count] [-t] [-u fd]
    [-C callback] [-c quantum] [array]

Read lines from the standard input into the indexed array variable array, or from file descriptor fd if the -u option is supplied.

A synonym for mapfile.

source

source filename

A synonym for . (see Bourne Shell Builtins).

type

type [-afptP] [name …]

For each name, indicate how it would be interpreted if used as a command name.

If the -t option is used, type prints a single word which is one of ‘alias’, ‘function’, ‘builtin’, ‘file’ or ‘keyword’, if name is an alias, shell function, shell builtin, disk file, or shell reserved word, respectively. If the name is not found, then nothing is printed, and type returns a failure status.

If the -p option is used, type either returns the name of the disk file that would be executed, or nothing if -t would not return ‘file’.

The -P option forces a path search for each name, even if -t would not return ‘file’.

If a command is hashed, -p and -P print the hashed value, which is not necessarily the file that appears first in $PATH.

If the -a option is used, type returns all of the places that contain an executable named file. This includes aliases and functions, if and only if the -p option is not also used.

If the -f option is used, type does not attempt to find shell functions, as with the command builtin.

The return status is zero if all of the names are found, non-zero if any are not found.

typeset

typeset [-afFgrxilnrtux] [-p] [name[=value] …]

The typeset command is supplied for compatibility with the Korn shell. It is a synonym for the declare builtin command.

ulimit

ulimit [-abcdefilmnpqrstuvxHST] [limit]

ulimit provides control over the resources available to processes started by the shell, on systems that allow such control. If an option is given, it is interpreted as follows:

-S

Change and report the soft limit associated with a resource.

-H

Change and report the hard limit associated with a resource.

-a

All current limits are reported.

-b

The maximum socket buffer size.

-c

The maximum size of core files created.

-d

The maximum size of a process’s data segment.

-e

The maximum scheduling priority ("nice").

-f

The maximum size of files written by the shell and its children.

-i

The maximum number of pending signals.

-l

The maximum size that may be locked into memory.

-m

The maximum resident set size (many systems do not honor this limit).

-n

The maximum number of open file descriptors (most systems do not allow this value to be set).

-p

The pipe buffer size.

-q

The maximum number of bytes in POSIX message queues.

-r

The maximum real-time scheduling priority.

-s

The maximum stack size.

-t

The maximum amount of cpu time in seconds.

-u

The maximum number of processes available to a single user.

-v

The maximum amount of virtual memory available to the shell, and, on some systems, to its children.

-x

The maximum number of file locks.

-T

The maximum number of threads.

If limit is given, and the -a option is not used, limit is the new value of the specified resource. The special limit values hard, soft, and unlimited stand for the current hard limit, the current soft limit, and no limit, respectively. A hard limit cannot be increased by a non-root user once it is set; a soft limit may be increased up to the value of the hard limit. Otherwise, the current value of the soft limit for the specified resource is printed, unless the -H option is supplied. When setting new limits, if neither -H nor -S is supplied, both the hard and soft limits are set. If no option is given, then -f is assumed. Values are in 1024-byte increments, except for -t, which is in seconds; -p, which is in units of 512-byte blocks; and -T, -b, -n and -u, which are unscaled values.

The return status is zero unless an invalid option or argument is supplied, or an error occurs while setting a new limit.

unalias

unalias [-a] [name … ]

Remove each name from the list of aliases. If -a is supplied, all aliases are removed. Aliases are described in Aliases.