Iterator Adaptor

Author: David Abrahams, Jeremy Siek, Thomas Witt
Contact: dave@boost-consulting.com, jsiek@osl.iu.edu, witt@ive.uni-hannover.de
Organization: Boost Consulting, Indiana University Open Systems Lab, University of Hanover Institute for Transport Railway Operation and Construction
Date: 2006-09-11
Copyright: Copyright David Abrahams, Jeremy Siek, and Thomas Witt 2003.
abstract:

Each specialization of the iterator_adaptor class template is derived from a specialization of iterator_facade. The core interface functions expected by iterator_facade are implemented in terms of the iterator_adaptor's Base template parameter. A class derived from iterator_adaptor typically redefines some of the core interface functions to adapt the behavior of the Base type. Whether the derived class models any of the standard iterator concepts depends on the operations supported by the Base type and which core interface functions of iterator_facade are redefined in the Derived class.

Table of Contents

Overview

The iterator_adaptor class template adapts some Base1 type to create a new iterator. Instantiations of iterator_adaptor are derived from a corresponding instantiation of iterator_facade and implement the core behaviors in terms of the Base type. In essence, iterator_adaptor merely forwards all operations to an instance of the Base type, which it stores as a member.

[1](1, 2) The term "Base" here does not refer to a base class and is not meant to imply the use of derivation. We have followed the lead of the standard library, which provides a base() function to access the underlying iterator object of a reverse_iterator adaptor.

The user of iterator_adaptor creates a class derived from an instantiation of iterator_adaptor and then selectively redefines some of the core member functions described in the iterator_facade core requirements table. The Base type need not meet the full requirements for an iterator; it need only support the operations used by the core interface functions of iterator_adaptor that have not been redefined in the user's derived class.

Several of the template parameters of iterator_adaptor default to use_default. This allows the user to make use of a default parameter even when she wants to specify a parameter later in the parameter list. Also, the defaults for the corresponding associated types are somewhat complicated, so metaprogramming is required to compute them, and use_default can help to simplify the implementation. Finally, the identity of the use_default type is not left unspecified because specification helps to highlight that the Reference template parameter may not always be identical to the iterator's reference type, and will keep users from making mistakes based on that assumption.

Reference

template <
    class Derived
  , class Base
  , class Value               = use_default
  , class CategoryOrTraversal = use_default
  , class Reference           = use_default
  , class Difference = use_default
>
class iterator_adaptor
  : public iterator_facade<Derived, V', C', R', D'> // see details
{
    friend class iterator_core_access;
 public:
    iterator_adaptor();
    explicit iterator_adaptor(Base const& iter);
    typedef Base base_type;
    Base const& base() const;
 protected:
    typedef iterator_adaptor iterator_adaptor_;
    Base const& base_reference() const;
    Base& base_reference();
 private: // Core iterator interface for iterator_facade.
    typename iterator_adaptor::reference dereference() const;

    template <
    class OtherDerived, class OtherIterator, class V, class C, class R, class D
    >
    bool equal(iterator_adaptor<OtherDerived, OtherIterator, V, C, R, D> const& x) const;

    void advance(typename iterator_adaptor::difference_type n);
    void increment();
    void decrement();

    template <
        class OtherDerived, class OtherIterator, class V, class C, class R, class D
    >
    typename iterator_adaptor::difference_type distance_to(
        iterator_adaptor<OtherDerived, OtherIterator, V, C, R, D> const& y) const;

 private:
    Base m_iterator; // exposition only
};

iterator_adaptor requirements

static_cast<Derived*>(iterator_adaptor*) shall be well-formed. The Base argument shall be Assignable and Copy Constructible.

iterator_adaptor base class parameters

The V', C', R', and D' parameters of the iterator_facade used as a base class in the summary of iterator_adaptor above are defined as follows:

V' = if (Value is use_default)
          return iterator_traits<Base>::value_type
      else
          return Value

C' = if (CategoryOrTraversal is use_default)
          return iterator_traversal<Base>::type
      else
          return CategoryOrTraversal

R' = if (Reference is use_default)
          if (Value is use_default)
              return iterator_traits<Base>::reference
          else
              return Value&
      else
          return Reference

D' = if (Difference is use_default)
          return iterator_traits<Base>::difference_type
      else
          return Difference

iterator_adaptor public operations

iterator_adaptor();

Requires:The Base type must be Default Constructible.
Returns:An instance of iterator_adaptor with m_iterator default constructed.

explicit iterator_adaptor(Base const& iter);

Returns:An instance of iterator_adaptor with m_iterator copy constructed from iter.

Base const& base() const;

Returns:m_iterator

iterator_adaptor protected member functions

Base const& base_reference() const;

Returns:A const reference to m_iterator.

Base& base_reference();

Returns:A non-const reference to m_iterator.

iterator_adaptor private member functions

typename iterator_adaptor::reference dereference() const;

Returns:*m_iterator
template <
class OtherDerived, class OtherIterator, class V, class C, class R, class D
>
bool equal(iterator_adaptor<OtherDerived, OtherIterator, V, C, R, D> const& x) const;
Returns:m_iterator == x.base()

void advance(typename iterator_adaptor::difference_type n);

Effects:m_iterator += n;

void increment();

Effects:++m_iterator;

void decrement();

Effects:--m_iterator;
template <
    class OtherDerived, class OtherIterator, class V, class C, class R, class D
>
typename iterator_adaptor::difference_type distance_to(
    iterator_adaptor<OtherDerived, OtherIterator, V, C, R, D> const& y) const;
Returns:y.base() - m_iterator

Tutorial Example

In this section we'll further refine the node_iter class template we developed in the iterator_facade tutorial. If you haven't already read that material, you should go back now and check it out because we're going to pick up right where it left off.

You probably didn't think of it this way, but the node_base* object that underlies node_iterator is itself an iterator, just like all other pointers. If we examine that pointer closely from an iterator perspective, we can see that it has much in common with the node_iterator we're building. First, they share most of the same associated types (value_type, reference, pointer, and difference_type). Second, even some of the core functionality is the same: operator* and operator== on the node_iterator return the result of invoking the same operations on the underlying pointer, via the node_iterator's dereference and equal member functions). The only real behavioral difference between node_base* and node_iterator can be observed when they are incremented: node_iterator follows the m_next pointer, while node_base* just applies an address offset.

It turns out that the pattern of building an iterator on another iterator-like type (the Base1 type) while modifying just a few aspects of the underlying type's behavior is an extremely common one, and it's the pattern addressed by iterator_adaptor. Using iterator_adaptor is very much like using iterator_facade, but because iterator_adaptor tries to mimic as much of the Base type's behavior as possible, we neither have to supply a Value argument, nor implement any core behaviors other than increment. The implementation of node_iter is thus reduced to:

template <class Value>
class node_iter
  : public boost::iterator_adaptor<
        node_iter<Value>                // Derived
      , Value*                          // Base
      , boost::use_default              // Value
      , boost::forward_traversal_tag    // CategoryOrTraversal
    >
{
 private:
    struct enabler {};  // a private type avoids misuse

 public:
    node_iter()
      : node_iter::iterator_adaptor_(0) {}

    explicit node_iter(Value* p)
      : node_iter::iterator_adaptor_(p) {}

    template <class OtherValue>
    node_iter(
        node_iter<OtherValue> const& other
      , typename boost::enable_if<
            boost::is_convertible<OtherValue*,Value*>
          , enabler
        >::type = enabler()
    )
      : node_iter::iterator_adaptor_(other.base()) {}

 private:
    friend class boost::iterator_core_access;
    void increment() { this->base_reference() = this->base()->next(); }
};

Note the use of node_iter::iterator_adaptor_ here: because iterator_adaptor defines a nested iterator_adaptor_ type that refers to itself, that gives us a convenient way to refer to the complicated base class type of node_iter<Value>. [Note: this technique is known not to work with Borland C++ 5.6.4 and Metrowerks CodeWarrior versions prior to 9.0]

You can see an example program that exercises this version of the node iterators here.

In the case of node_iter, it's not very compelling to pass boost::use_default as iterator_adaptor's Value argument; we could have just passed node_iter's Value along to iterator_adaptor, and that'd even be shorter! Most iterator class templates built with iterator_adaptor are parameterized on another iterator type, rather than on its value_type. For example, boost::reverse_iterator takes an iterator type argument and reverses its direction of traversal, since the original iterator and the reversed one have all the same associated types, iterator_adaptor's delegation of default types to its Base saves the implementor of boost::reverse_iterator from writing:

std::iterator_traits<Iterator>::some-associated-type

at least four times.

We urge you to review the documentation and implementations of reverse_iterator and the other Boost specialized iterator adaptors to get an idea of the sorts of things you can do with iterator_adaptor. In particular, have a look at transform_iterator, which is perhaps the most straightforward adaptor, and also counting_iterator, which demonstrates that iterator_adaptor's Base type needn't be an iterator.