Docker Swarm discovery

You are viewing docs for legacy standalone Swarm. These topics describe standalone Docker Swarm. In Docker 1.12 and higher, Swarm mode is integrated with Docker Engine. Most users should use integrated Swarm mode — a good place to start is Getting started with swarm mode, Swarm mode CLI commands, and the Get started with Docker walkthrough). Standalone Docker Swarm is not integrated into the Docker Engine API and CLI commands.

Estimated reading time: 6 minutes

Docker Swarm comes with multiple discovery backends. You use a hosted discovery service with Docker Swarm. The service maintains a list of IPs in your cluster. This page describes the different types of hosted discovery. These are:

Use a distributed key/value store

The recommended way to do node discovery in Swarm is Docker’s libkv project. The libkv project is an abstraction layer over existing distributed key/value stores. As of this writing, the project supports:

  • Consul 0.5.1 or higher
  • Etcd 2.0 or higher
  • ZooKeeper 3.4.5 or higher

For details about libkv and a detailed technical overview of the supported backends, refer to the libkv project.

Use a hosted discovery key store

  1. On each node, start the Swarm agent.

    The node IP address doesn’t need to be public as long as the Swarm manager can access it. In a large cluster, the nodes joining swarm may trigger request spikes to discovery. For example, a large number of nodes are added by a script, or recovered from a network partition. This may result in discovery failure. You can use --delay option to specify a delay limit. The swarm join command adds a random delay less than this limit to reduce pressure to discovery.

    Etcd:

     swarm join --advertise=<node_ip:2375> etcd://<etcd_addr1>,<etcd_addr2>/<optional path prefix>

    Consul:

     swarm join --advertise=<node_ip:2375> consul://<consul_addr>/<optional path prefix>

    ZooKeeper:

     swarm join --advertise=<node_ip:2375> zk://<zookeeper_addr1>,<zookeeper_addr2>/<optional path prefix>

  2. Start the swarm manager on any machine or your laptop.

    Etcd:

     swarm manage -H tcp://<swarm_ip:swarm_port> etcd://<etcd_addr1>,<etcd_addr2>/<optional path prefix>

    Consul:

     swarm manage -H tcp://<swarm_ip:swarm_port> consul://<consul_addr>/<optional path prefix>

    ZooKeeper:

     swarm manage -H tcp://<swarm_ip:swarm_port> zk://<zookeeper_addr1>,<zookeeper_addr2>/<optional path prefix>

  3. Use the regular Docker commands.

     docker -H tcp://<swarm_ip:swarm_port> info
 docker -H tcp://<swarm_ip:swarm_port> run ...
 docker -H tcp://<swarm_ip:swarm_port> ps
 docker -H tcp://<swarm_ip:swarm_port> logs ...
 ...

  4. Try listing the nodes in your cluster.

    Etcd:

     swarm list etcd://<etcd_addr1>,<etcd_addr2>/<optional path prefix>
 <node_ip:2375>

    Consul:

     swarm list consul://<consul_addr>/<optional path prefix>
 <node_ip:2375>

    ZooKeeper:

     swarm list zk://<zookeeper_addr1>,<zookeeper_addr2>/<optional path prefix>
 <node_ip:2375>

Use TLS with distributed key/value discovery

You can securely talk to the distributed k/v store using TLS. To connect securely to the store, you must generate the certificates for a node when you join it to the swarm. You can only use with Consul and Etcd. The following example illustrates this with Consul:

swarm join \
    --advertise=<node_ip:2375> \
    --discovery-opt kv.cacertfile=/path/to/mycacert.pem \
    --discovery-opt kv.certfile=/path/to/mycert.pem \
    --discovery-opt kv.keyfile=/path/to/mykey.pem \
    consul://<consul_addr>/<optional path prefix>

This works the same way for the swarm manage and list commands.

A static file or list of nodes

Note: This discovery method is incompatible with replicating swarm managers. If you require replication, you should use a hosted discovery key store.

You can use a static file or list of nodes for your discovery backend. The file must be stored on a host that is accessible from the swarm manager. You can also pass a node list as an option when you start Swarm.

Both the static file and the nodes option support an IP address range. To specify a range supply a pattern, for example, 10.0.0.[10:200] refers to nodes starting from 10.0.0.10 to 10.0.0.200. For example for the file discovery method.

    $ echo "10.0.0.[11:100]:2375"   >> /tmp/my_cluster
    $ echo "10.0.1.[15:20]:2375"    >> /tmp/my_cluster
    $ echo "192.168.1.2:[2:20]375"  >> /tmp/my_cluster

Or with node discovery:

    swarm manage -H <swarm_ip:swarm_port> "nodes://10.0.0.[10:200]:2375,10.0.1.[2:250]:2375"

To create a file

  1. Edit the file and add line for each of your nodes.

     echo <node_ip1:2375> >> /opt/my_cluster
 echo <node_ip2:2375> >> /opt/my_cluster
 echo <node_ip3:2375> >> /opt/my_cluster

    This example creates a file named /tmp/my_cluster. You can use any name you like.

  2. Start the swarm manager on any machine.

     swarm manage -H tcp://<swarm_ip:swarm_port> file:///tmp/my_cluster

  3. Use the regular Docker commands.

     docker -H tcp://<swarm_ip:swarm_port> info
 docker -H tcp://<swarm_ip:swarm_port> run ...
 docker -H tcp://<swarm_ip:swarm_port> ps
 docker -H tcp://<swarm_ip:swarm_port> logs ...
 ...

  4. List the nodes in your cluster.

     $ swarm list file:///tmp/my_cluster
 <node_ip1:2375>
 <node_ip2:2375>
 <node_ip3:2375>

To use a node list

  1. Start the manager on any machine or your laptop.

     swarm manage -H <swarm_ip:swarm_port> nodes://<node_ip1:2375>,<node_ip2:2375>

    or

     swarm manage -H <swarm_ip:swarm_port> <node_ip1:2375>,<node_ip2:2375>

  2. Use the regular Docker commands.

     docker -H <swarm_ip:swarm_port> info
 docker -H <swarm_ip:swarm_port> run ...
 docker -H <swarm_ip:swarm_port> ps
 docker -H <swarm_ip:swarm_port> logs ...

  3. List the nodes in your cluster.

     $ swarm list file:///tmp/my_cluster
 <node_ip1:2375>
 <node_ip2:2375>
 <node_ip3:2375>

Docker Hub as a hosted discovery service

Warning: The Docker Hub Hosted Discovery Service is not recommended for production use. It’s intended to be used for testing/development. See the discovery backends for production use.

This example uses the hosted discovery service on Docker Hub. Using Docker Hub’s hosted discovery service requires that each node in the swarm is connected to the public internet. To create your cluster:

  1. Create a cluster.

     $ swarm create
 6856663cdefdec325839a4b7e1de38e8 # <- this is your unique <cluster_id>

  2. Create each node and join them to the cluster.

    On each of your nodes, start the swarm agent. The node IP address doesn’t need to be public (eg. 192.168.0.X) but the swarm manager must be able to access it.

     $ swarm join --advertise=<node_ip:2375> token://<cluster_id>

  3. Start the swarm manager.

    This can be on any machine or even your laptop.

     $ swarm manage -H tcp://<swarm_ip:swarm_port> token://<cluster_id>

  4. Use regular Docker commands to interact with your cluster.

     docker -H tcp://<swarm_ip:swarm_port> info
 docker -H tcp://<swarm_ip:swarm_port> run ...
 docker -H tcp://<swarm_ip:swarm_port> ps
 docker -H tcp://<swarm_ip:swarm_port> logs ...
 ...

  5. List the nodes in your cluster.

     swarm list token://<cluster_id>
 <node_ip:2375>

Contribute a new discovery backend

You can contribute a new discovery backend to Swarm. For information on how to do this, see github.com/moby/moby/pkg/discovery.

Docker Swarm documentation index

Rate this page:

 
2
 
1