Content-type: text/html; charset=UTF-8 Man page of KCMP

KCMP

Section: Linux Programmer's Manual (2)
Updated: 2016-07-17
Index Return to Main Contents
 

NAME

kcmp - compare two processes to determine if they share a kernel resource  

SYNOPSIS

#include <linux/kcmp.h>

int kcmp(pid_t pid1, pid_t pid2, int type,
         unsigned long idx1, unsigned long idx2);

Note: There is no glibc wrapper for this system call; see NOTES.  

DESCRIPTION

The kcmp() system call can be used to check whether the two processes identified by pid1 and pid2 share a kernel resource such as virtual memory, file descriptors, and so on.

Permission to employ kcmp() is governed by ptrace access mode PTRACE_MODE_READ_REALCREDS checks against both pid1 and pid2; see ptrace(2).

The type argument specifies which resource is to be compared in the two processes. It has one of the following values:

KCMP_FILE
Check whether a file descriptor idx1 in the process pid1 refers to the same open file description (see open(2)) as file descriptor idx2 in the process pid2.
KCMP_FILES
Check whether the process share the same set of open file descriptors. The arguments idx1 and idx2 are ignored.
KCMP_FS
Check whether the processes share the same filesystem information (i.e., file mode creation mask, working directory, and filesystem root). The arguments idx1 and idx2 are ignored.
KCMP_IO
Check whether the processes share I/O context. The arguments idx1 and idx2 are ignored.
KCMP_SIGHAND
Check whether the processes share the same table of signal dispositions. The arguments idx1 and idx2 are ignored.
KCMP_SYSVSEM
Check whether the processes share the same list of System V semaphore undo operations. The arguments idx1 and idx2 are ignored.
KCMP_VM
Check whether the processes share the same address space. The arguments idx1 and idx2 are ignored.

Note the kcmp() is not protected against false positives which may occur if the processes are currently running. One should stop the processes by sending SIGSTOP (see signal(7)) prior to inspection with this system call to obtain meaningful results.  

RETURN VALUE

The return value of a successful call to kcmp() is simply the result of arithmetic comparison of kernel pointers (when the kernel compares resources, it uses their memory addresses).

The easiest way to explain is to consider an example. Suppose that v1 and v2 are the addresses of appropriate resources, then the return value is one of the following:

0
v1 is equal to v2; in other words, the two processes share the resource.
1
v1 is less than v2.
2
v1 is greater than v2.
3
v1 is not equal to v2, but ordering information is unavailable.

On error, -1 is returned, and errno is set appropriately.

kcmp() was designed to return values suitable for sorting. This is particularly handy if one needs to compare a large number of file descriptors.  

ERRORS

EBADF
type is KCMP_FILE and fd1 or fd2 is not an open file descriptor.
EINVAL
type is invalid.
EPERM
Insufficient permission to inspect process resources. The CAP_SYS_PTRACE capability is required to inspect processes that you do not own. Other ptrace limitations may also apply, such as CONFIG_SECURITY_YAMA, which, when /proc/sys/kernel/yama/ptrace_scope is 2, limits kcmp() to child processes; see ptrace(2).
ESRCH
Process pid1 or pid2 does not exist.
 

VERSIONS

The kcmp() system call first appeared in Linux 3.5.  

CONFORMING TO

kcmp() is Linux-specific and should not be used in programs intended to be portable.  

NOTES

Glibc does not provide a wrapper for this system call; call it using syscall(2).

This system call is available only if the kernel was configured with CONFIG_CHECKPOINT_RESTORE. The main use of the system call is for the checkpoint/restore in user space (CRIU) feature. The alternative to this system call would have been to expose suitable process information via the proc(5) filesystem; this was deemed to be unsuitable for security reasons.

See clone(2) for some background information on the shared resources referred to on this page.  

EXAMPLE

The program below uses kcmp() to test whether pairs of file descriptors refer to the same open file description. The program tests different cases for the file descriptor pairs, as described in the program output. An example run of the program is as follows:

$ ./a.out
Parent PID is 1144
Parent opened file on FD 3

PID of child of fork() is 1145
        Compare duplicate FDs from different processes:
                kcmp(1145, 1144, KCMP_FILE, 3, 3) ==> same
Child opened file on FD 4
        Compare FDs from distinct open()s in same process:
                kcmp(1145, 1145, KCMP_FILE, 3, 4) ==> different
Child duplicated FD 3 to create FD 5
        Compare duplicated FDs in same process:
                kcmp(1145, 1145, KCMP_FILE, 3, 5) ==> same
 

Program source

#define _GNU_SOURCE
#include <sys/syscall.h>
#include <sys/wait.h>
#include <sys/stat.h>
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
#include <linux/kcmp.h>

#define errExit(msg)    do { perror(msg); exit(EXIT_FAILURE); \
                        } while (0)

static int
kcmp(pid_t pid1, pid_t pid2, int type,
     unsigned long idx1, unsigned long idx2)
{
    return syscall(SYS_kcmp, pid1, pid2, type, idx1, idx2);
}

static void
test_kcmp(char *msg, id_t pid1, pid_t pid2, int fd_a, int fd_b)
{
    printf("\t%s\n", msg);
    printf("\t\tkcmp(%ld, %ld, KCMP_FILE, %d, %d) ==> %s\n",
            (long) pid1, (long) pid2, fd_a, fd_b,
            (kcmp(pid1, pid2, KCMP_FILE, fd_a, fd_b) == 0) ?
                        "same" : "different");
}

int
main(int argc, char *argv[])
{
    int fd1, fd2, fd3;
    char pathname[] = "/tmp/kcmp.test";

    fd1 = open(pathname, O_CREAT | O_RDWR, S_IRUSR | S_IWUSR);
    if (fd1 == -1)
        errExit("open");

    printf("Parent PID is %ld\n", (long) getpid());
    printf("Parent opened file on FD %d\n\n", fd1);

    switch (fork()) {
    case -1:
        errExit("fork");

    case 0:
        printf("PID of child of fork() is %ld\n", (long) getpid());

        test_kcmp("Compare duplicate FDs from different processes:",
                getpid(), getppid(), fd1, fd1);

        fd2 = open(pathname, O_CREAT | O_RDWR, S_IRUSR | S_IWUSR);
        if (fd2 == -1)
            errExit("open");
        printf("Child opened file on FD %d\n", fd2);

        test_kcmp("Compare FDs from distinct open()s in same process:",
                getpid(), getpid(), fd1, fd2);

        fd3 = dup(fd1);
        if (fd3 == -1)
            errExit("dup");
        printf("Child duplicated FD %d to create FD %d\n", fd1, fd3);

        test_kcmp("Compare duplicated FDs in same process:",
                getpid(), getpid(), fd1, fd3);
        break;

    default:
        wait(NULL);
    }

    exit(EXIT_SUCCESS);
}
 

SEE ALSO

clone(2), unshare(2)  

COLOPHON

This page is part of release 4.09 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man-pages/.


 

Index

NAME
SYNOPSIS
DESCRIPTION
RETURN VALUE
ERRORS
VERSIONS
CONFORMING TO
NOTES
EXAMPLE
Program source
SEE ALSO
COLOPHON

This document was created by man2html, using the manual pages.
Time: 14:28:27 GMT, February 25, 2017