PHP 7.0.6 Released

Floating point numbers

Floating point numbers (also known as "floats", "doubles", or "real numbers") can be specified using any of the following syntaxes:

<?php
$a 
1.234
$b 1.2e3
$c 7E-10;
?>

Formally:

LNUM          [0-9]+
DNUM          ([0-9]*[\.]{LNUM}) | ({LNUM}[\.][0-9]*)
EXPONENT_DNUM [+-]?(({LNUM} | {DNUM}) [eE][+-]? {LNUM})

The size of a float is platform-dependent, although a maximum of ~1.8e308 with a precision of roughly 14 decimal digits is a common value (the 64 bit IEEE format).

Warning

Floating point precision

Floating point numbers have limited precision. Although it depends on the system, PHP typically uses the IEEE 754 double precision format, which will give a maximum relative error due to rounding in the order of 1.11e-16. Non elementary arithmetic operations may give larger errors, and, of course, error propagation must be considered when several operations are compounded.

Additionally, rational numbers that are exactly representable as floating point numbers in base 10, like 0.1 or 0.7, do not have an exact representation as floating point numbers in base 2, which is used internally, no matter the size of the mantissa. Hence, they cannot be converted into their internal binary counterparts without a small loss of precision. This can lead to confusing results: for example, floor((0.1+0.7)*10) will usually return 7 instead of the expected 8, since the internal representation will be something like 7.9999999999999991118....

So never trust floating number results to the last digit, and do not compare floating point numbers directly for equality. If higher precision is necessary, the arbitrary precision math functions and gmp functions are available.

For a "simple" explanation, see the » floating point guide that's also titled "Why don’t my numbers add up?"

Converting to float

For information on converting strings to float, see String conversion to numbers. For values of other types, the conversion is performed by converting the value to integer first and then to float. See Converting to integer for more information. As of PHP 5, a notice is thrown if an object is converted to float.

Comparing floats

As noted in the warning above, testing floating point values for equality is problematic, due to the way that they are represented internally. However, there are ways to make comparisons of floating point values that work around these limitations.

To test floating point values for equality, an upper bound on the relative error due to rounding is used. This value is known as the machine epsilon, or unit roundoff, and is the smallest acceptable difference in calculations.

$a and $b are equal to 5 digits of precision.

<?php
$a 
1.23456789;
$b 1.23456780;
$epsilon 0.00001;

if(
abs($a-$b) < $epsilon) {
    echo 
"true";
}
?>

NaN

Some numeric operations can result in a value represented by the constant NAN. This result represents an undefined or unrepresentable value in floating-point calculations. Any loose or strict comparisons of this value against any other value, including itself, will have a result of FALSE.

Because NAN represents any number of different values, NAN should not be compared to other values, including itself, and instead should be checked for using is_nan().

User Contributed Notes

catalin dot luntraru at gmail dot com
2 years ago
$x = 8 - 6.4;  // which is equal to 1.6
$y = 1.6;
var_dump($x == $y); // is not true

PHP thinks that 1.6 (coming from a difference) is not equal to 1.6. To make it work, use round()

var_dump(round($x, 2) == round($y, 2)); // this is true

This happens probably because $x is not really 1.6, but 1.599999.. and var_dump shows it to you as being 1.6.
www.sarioz.com
13 years ago
just a comment on something the "Floating point precision" inset, which goes: "This is related to .... 0.3333333."

While the author probably knows what they are talking about, this loss of precision has nothing to do with decimal notation, it has to do with representation as a floating-point binary in a finite register, such as while 0.8 terminates in decimal, it is the repeating 0.110011001100... in binary, which is truncated.  0.1 and 0.7 are also non-terminating in binary, so they are also truncated, and the sum of these truncated numbers does not add up to the truncated binary representation of 0.8 (which is why (floor)(0.8*10) yields a different, more intuitive, result).  However, since 2 is a factor of 10, any number that terminates in binary also terminates in decimal.
feline at NOSPAM dot penguin dot servehttp dot com
11 years ago
General computing hint: If you're keeping track of money, do yourself and your users the favor of handling everything internally in cents and do as much math as you can in integers. Store values in cents if at all possible. Add and subtract in cents. At every operation that wii involve floats, ask yourself "what will happen in the real world if I get a fraction of a cent here" and if the answer is that this operation will generate a transaction in integer cents, do not try to carry fictional fractional accuracy that will only screw things up later.
backov at spotbrokers-nospamplz dot com
13 years ago
I'd like to point out a "feature" of PHP's floating point support that isn't made clear anywhere here, and was driving me insane.

This test (where var_dump says that $a=0.1 and $b=0.1)

if ($a>=$b) echo "blah!";

Will fail in some cases due to hidden precision (standard C problem, that PHP docs make no mention of, so I assumed they had gotten rid of it). I should point out that I originally thought this was an issue with the floats being stored as strings, so I forced them to be floats and they still didn't get evaluated properly (probably 2 different problems there).

To fix, I had to do this horrible kludge (the equivelant of anyway):

if (round($a,3)>=round($b,3)) echo "blah!";

THIS works. Obviously even though var_dump says the variables are identical, and they SHOULD BE identical (started at 0.01 and added 0.001 repeatedly), they're not. There's some hidden precision there that was making me tear my hair out. Perhaps this should be added to the documentation?
magicaltux at php dot net
5 years ago
In some cases you may want to get the maximum value for a float without getting "INF".

var_dump(1.8e308); will usually show: float(INF)

I wrote a tiny function that will iterate in order to find the biggest non-infinite float value. It comes with a configurable multiplicator and affine values so you can share more CPU to get a more accurate estimate.

I haven't seen better values with more affine, but well, the possibility is here so if you really thing it's worth the cpu time, just try to affine more.

Best results seems to be with mul=2/affine=1. You can play with the values and see what you get. The good thing is this method will work on any system.

<?php
 
function float_max($mul = 2, $affine = 1) {
   
$max = 1; $omax = 0;
    while((string)
$max != 'INF') { $omax = $max; $max *= $mul; }

    for(
$i = 0; $i < $affine; $i++) {
     
$pmax = 1; $max = $omax;
      while((string)
$max != 'INF') {
       
$omax = $max;
       
$max += $pmax;
       
$pmax *= $mul;
      }
    }
    return
$omax;
  }
?>
Adam H
1 year ago
I've just come across this issue with floats when writing a function for pricing. When converting from string to a float, with 2 digits of precision, the issue with comparing floats can pop up and give inconsistent results due to the conversion process.

An easier way rather than relying on the mentioned epsilon method is to use number_format (at least for me as I'll remember it!).

Example function that can return an unexpected result:

if((float)$a == (float)$b) {
echo true;
} else {
echo false;
}

echo's false in this example.

Using number format here to trim down the precision (2 point precision being mostly used for currencies etc, although higher precisions should be correctly catered for by number_format), will return an expected result:

if(number_format((float)$a, 2) == number_format((float)$b, 2)) {
echo true;
} else {
echo false;
}

Correctly echo's true.
zelko at mojeime dot com
5 years ago
<?php
   $binarydata32
= pack('H*','00000000');
  
$float32 = unpack("f", $binarydata32); // 0.0

  
$binarydata64 = pack('H*','0000000000000000');
  
$float64 = unpack("d", $binarydata64); // 0.0
?>

I get 0 both for 32-bit and 64-bit numbers.

But, please don't use your own "functions" to "convert" from float to binary and vice versa. Looping performance in PHP is horrible. Using pack/unpack you use processor's encoding, which is always correct. In C++ you can access the same 32/64 data as either float/double or 32/64 bit integer. No "conversions".

To get binary encoding:
<?php
   $float32
= pack("f", 5300231);
  
$binarydata32 =unpack('H*',$float32); //"0EC0A14A"

  
$float64 = pack("d", 5300231);
  
$binarydata64 =unpack('H*',$float64); //"000000C001385441"
?>

And my example from half a year ago:
<?php
    $binarydata32
= pack('H*','0EC0A14A');
   
$float32 = unpack("f", $binarydata32); // 5300231
  
   
$binarydata64 = pack('H*','000000C001385441');
   
$float64 = unpack("d", $binarydata64); // 5300231
?>

And please mind the Big and Little endian boys...
Luzian
10 years ago
Be careful when using float values in strings that are used as code later, for example when generating JavaScript code or SQL statements. The float is actually formatted according to the browser's locale setting, which means that "0.23" will result in "0,23". Imagine something like this:

$x = 0.23;
$js = "var foo = doBar($x);";
print $js;

This would result in a different result for users with some locales. On most systems, this would print:

var foo = doBar(0.23);

but when for example a user from Germany arrives, it would be different:

var foo = doBar(0,23);

which is obviously a different call to the function. JavaScript won't state an error, additional arguments are discarded without notice, but the function doBar(a) would get 0 as parameter. Similar problems could arise anywhere else (SQL, any string used as code somewhere else). The problem persists, if you use the "." operator instead of evaluating the variable in the string.

So if you REALLY need to be sure to have the string correctly formatted, use number_format() to do it!
jack at surfacefinishtech dot com
3 years ago
<?php
/** hex2float
* (Convert 8 digit hexadecimal value to float (single-precision 32bits)
* Accepts 8 digit hexadecimal values in a string
* @usage:
* hex2float32n("429241f0"); returns -> "73.128784179688"
* */
function hex2float($number) {
   
$binfinal = sprintf("%032b",hexdec($number));
   
$sign = substr($binfinal, 0, 1);
   
$exp = substr($binfinal, 1, 8);
   
$mantissa = "1".substr($binfinal, 9);
   
$mantissa = str_split($mantissa);
   
$exp = bindec($exp)-127;
   
$significand=0;
    for (
$i = 0; $i < 24; $i++) {
       
$significand += (1 / pow(2,$i))*$mantissa[$i];
    }
    return
$significand * pow(2,$exp) * ($sign*-2+1);
}
?>
luizvid at gmail dot com
11 months ago
An effective way to compare two real numbers (including floating point numbers) with high accuracy and still be able to set precision is using the BC Math function bccomp();

For instance:
<?php
    $a
= 1.23456789;
   
$b = 1.23456780;
   
$precision = 5;

    if(
bccomp($a, $b, $precision)  === 0 ) {
        echo
"true";
    }
// true
?>
<?php
    $a
= sprintf('%.17f', 0.1+0.2);
   
$b = 0.3;

    if(
bccomp($a, $b, 17)  !== 0 ) {
        echo
"FALSE";
    }
// FALSE
?>
m dot lebkowski+php at gmail dot com
8 years ago
Just another note about the locales. Consider the following code:

<?php
   
// in polish locale decimal separator is ","
   
setlocale(LC_ALL, "pl_PL");
   
$a = 5/2;
    echo (float)(string)
$a;
   
/// prints "2", so the decimal part is dropped
?>

This causes very serious problems in my opinion. In some locale combination the typecasting can be destructive.
Maybe when locale decimal separator is ",", then (float)"2,5" should be recognized as "two and a half"?
Anyway - bare that in mind and be very careful when casting floats to strings and back.
dev at maintainfit dot com
13 years ago
I was programming an accounting application in MySql that required me to sum a collection of floats and ensure that they equal zero before commiting a transaction, but as seen above a sum of floats cannot always be trusted (as was my case).  I kept getting a very small remainder (like 1.4512431231e-14).  Since I had used number_format(num,2) to set the precision of the numbers in the database to only two (2) decimal places, when the time comes to calculate the sum I simply multiply every number by ten (10), therby eliminating and decimal places and leaving me with integers to preform my sum.  This worked great.
davidszilardd at gmail dot com
4 years ago
The function returns 5 for 5,000 because if there is no decimal point, then the first strpos will be FALSE, and FALSE < 1 is TRUE so the condition will be still true.

It should be checked whether strpos returns a valid position:

<?php
function str2num($str)
{
      if (
strpos($str, '.') !== FALSE && strpos($str,    ',') !== FALSE && strpos($str, '.') < strpos($str,','))
          {
           
$str = str_replace('.','',$str);
           
$str = strtr($str,',','.');           
        }
        else
        {
           
$str = str_replace(',','',$str);           
        }
       
        return (float)
$str;
}
?>
rick at ninjafoo dot com
10 years ago
Concider the following:

(19.6*100) != 1960 

echo gettype(19.6*100) returns 'double', However even .....

(19.6*100) !== (double)1960

19.6*100 cannot be compaired to anything without manually
casting it as something else first.

(string)(19.6*100) == 1960

Rule of thumb, if it has a decimal point, use the BCMath functions.
Bob
6 years ago
In MySQL, many floating point number types can have a range specified using 2 values, the "precision" and the "scale" E.g. 'float(precision,scale)' for the datatype. This syntax means a number may be <precision> bits long, but may only have <scale> bits after the decimal point. E.g. a 'float(5,2)' field may have the values -999.99 to 999.99.
Here is a function to validate a PHP float using this syntax:
<?php
function validate_float($float, $precision, $scale)
{
   
$max = (float)str_pad("", $precision-$scale, '9').'.'.str_pad("", $scale, '9');
   
$min = (float)"-$max";

    if((
$float < $min) || ($float > $max)) return false;
    else return
true;
}
?>
james dot cridland at virginradio dot co dot uk
13 years ago
The 'floating point precision' box in practice means:

<? echo (69.1-floor(69.1)); ?>
Think this'll return 0.1?
It doesn't - it returns 0.099999999999994

<? echo round((69.1-floor(69.1))); ?>
This returns 0.1 and is the workaround we use.

Note that
<? echo (4.1-floor(4.1)); ?>
*does* return 0.1 - so if you, like us, test this with low numbers, you won't, like us, understand why all of a sudden your script stops working, until you spend a lot of time, like us, debugging it.

So, that's all lovely then.
Julian L
5 years ago
Convert a hex string into a 32-bit IEEE 754 float number.  This function is 2 times faster then the below hex to 32bit function.  This function only changes datatypes (string to int) once. Also, this function is a port from the hex to 64bit function from below.

<?php
function hexTo32Float($strHex) {
   
$v = hexdec($strHex);
   
$x = ($v & ((1 << 23) - 1)) + (1 << 23) * ($v >> 31 | 1);
   
$exp = ($v >> 23 & 0xFF) - 127;
    return
$x * pow(2, $exp - 23);
}
?>

<?php
//example
echo hexTo32Float("C4028000"); // outputs: -522
echo hexTo32Float("457F9000"); // outputs: 4089
echo hexTo32Float("2D7F5");    // outputs: 6.00804264307E-39
echo hexTo32Float("0002D7F5"); // outputs: 6.00804264307E-39
echo hexTo32Float("47D9F95E"); // outputs: 111602.734375
?>
kjohnson at zootweb dot com
7 years ago
PHP switches from the standard decimal notation to exponential notation for certain "special" floats. You can see a partial list of such "special" values with this:

<?php
for( $tmp = 0, $i = 0; $i < 100; $i++ ) {
   
$tmp += 100000;
    echo
round($tmp),"\n";
}
?>

So, if you add two floats, end up with a "special" value, e.g. 1.2E+6, then put that value unmodified into an update query to store the value in a decimal column, say, you will likely get a failed transaction, since the database will see "1.2E+6" as varchar data, not decimal. Likewise, you will likely get an XSD validation error if you put the value into xml.

I have to be honest: this is one of the strangest things I have seen in any language in over 20 years of coding, and it is a colossal pain to work around.
inforsci at gmail dot com
6 years ago
convert 32bit HEX values into IEEE 754 floating point
<?php

$strHex
= "C45F82ED";

$bin = str_pad(base_convert($strHex, 16, 2), 32, "0", STR_PAD_LEFT);
$sign = $bin[0];
$exp = bindec(substr($bin, 1, 8)) - 127;
$man = (2 << 22) + bindec(substr($bin, 9, 23));

$dec = $man * pow(2, $exp - 23) * ($sign ? -1 : 1);

echo
"Answer = " . $dec . "<BR>\n";

?>
zelko at mojeime dot com
5 years ago
The was talk about "converting" 32 and 64 bit IEEE754 binary numbers to PHP float. The issue isn't as much converting, since they are already in binary form, as it is casting. PHP doesn't allow direct accessing of memory, but you can still get around a bit.

The right was to read floats (32 and 64 bit) is this:

<?php
    $binarydata32
= pack('H*','0EC0A14A');
   
$float32 = unpack("f", $binarydata32);
   
   
$binarydata64 = pack('H*','000000C001385441');
   
$float64 = unpack("d", $binarydata64);
   
   
var_dump($float32,$float64,$float32==$float64);  
?>

The result of dump():
<?php
array(1) {
  [
1]=>
 
float(5300231)
}
array(
1) {
  [
1]=>
 
float(5300231)
}
bool(true)
?>

Note: mind the Big and Little endian boys
Anonymous
6 years ago
Calculations involving float types become inaccurate when it deals with numbers with more than approximately 8 digits long where ever the decimal point is.  This is because of how 32bit floats are commonly stored in memory.  This means if you rely on float types while working with tiny fractions or large numbers, your calculations can end up between tiny fractions to several trillion off.

This usually won't matter when converting to binary memory storage form and editing many applications' float memory addresses directly, or dealing with smaller length numbers.  But if you're working with larger scale numbers and decimals, it's best to switch to working with other types: http://www.php.net/manual/en/refs.math.php
Bob
6 years ago
Here is a function to convert an exponential-format float to a decimal-format float; e.g. 1.6e+12 to 1600000000000.
It will help addressing the problem specified by kjohnson above.
I have tested it, but not in any real world situation so any feedback/improvements/bug-reports would be appreciated.
<?php
function exp_to_dec($float_str)
// formats a floating point number string in decimal notation, supports signed floats, also supports non-standard formatting e.g. 0.2e+2 for 20
// e.g. '1.6E+6' to '1600000', '-4.566e-12' to '-0.000000000004566', '+34e+10' to '340000000000'
// Author: Bob
{
   
// make sure its a standard php float string (i.e. change 0.2e+2 to 20)
    // php will automatically format floats decimally if they are within a certain range
   
$float_str = (string)((float)($float_str));

   
// if there is an E in the float string
   
if(($pos = strpos(strtolower($float_str), 'e')) !== false)
    {
       
// get either side of the E, e.g. 1.6E+6 => exp E+6, num 1.6
       
$exp = substr($float_str, $pos+1);
       
$num = substr($float_str, 0, $pos);
       
       
// strip off num sign, if there is one, and leave it off if its + (not required)
       
if((($num_sign = $num[0]) === '+') || ($num_sign === '-')) $num = substr($num, 1);
        else
$num_sign = '';
        if(
$num_sign === '+') $num_sign = '';
       
       
// strip off exponential sign ('+' or '-' as in 'E+6') if there is one, otherwise throw error, e.g. E+6 => '+'
       
if((($exp_sign = $exp[0]) === '+') || ($exp_sign === '-')) $exp = substr($exp, 1);
        else
trigger_error("Could not convert exponential notation to decimal notation: invalid float string '$float_str'", E_USER_ERROR);
       
       
// get the number of decimal places to the right of the decimal point (or 0 if there is no dec point), e.g., 1.6 => 1
       
$right_dec_places = (($dec_pos = strpos($num, '.')) === false) ? 0 : strlen(substr($num, $dec_pos+1));
       
// get the number of decimal places to the left of the decimal point (or the length of the entire num if there is no dec point), e.g. 1.6 => 1
       
$left_dec_places = ($dec_pos === false) ? strlen($num) : strlen(substr($num, 0, $dec_pos));
       
       
// work out number of zeros from exp, exp sign and dec places, e.g. exp 6, exp sign +, dec places 1 => num zeros 5
       
if($exp_sign === '+') $num_zeros = $exp - $right_dec_places;
        else
$num_zeros = $exp - $left_dec_places;
       
       
// build a string with $num_zeros zeros, e.g. '0' 5 times => '00000'
       
$zeros = str_pad('', $num_zeros, '0');
       
       
// strip decimal from num, e.g. 1.6 => 16
       
if($dec_pos !== false) $num = str_replace('.', '', $num);
       
       
// if positive exponent, return like 1600000
       
if($exp_sign === '+') return $num_sign.$num.$zeros;
       
// if negative exponent, return like 0.0000016
       
else return $num_sign.'0.'.$zeros.$num;
    }
   
// otherwise, assume already in decimal notation and return
   
else return $float_str;
}
?>
info at forrest79 dot net
7 years ago
My BIN to FLOAT (IEEE754), the first one doesn't work for me:

<?php
       
function binToFloat($bin) {
            if(
strlen($bin) > 32) {
                return
false;
            } else if(
strlen($bin) < 32) {
               
$bin = str_repeat('0', (32 - strlen($bin))) . $bin;
            }

           
$sign = 1;
            if(
intval($bin[0]) == 1) {
               
$sign = -1;
            }

           
$binExponent = substr($bin, 1, 8);
           
$exponent = -127;
            for(
$i = 0; $i < 8; $i++) {
               
$exponent += (intval($binExponent[7 - $i]) * pow(2, $i));
            }

           
$binBase = substr($bin, 9);           
           
$base = 1.0;
            for(
$x = 0; $x < 23; $x++) {
               
$base += (intval($binBase[$x]) * pow(0.5, ($x + 1)));
            }

           
$float = (float) $sign * pow(2, $exponent) * $base;

            return
$float;
        }
?>
pcunha at gmail dot com
3 years ago
To simply convert 32 bits float from hex to float:

<?php
function hexfloat ($hex){
    return (
unpack("f", pack('H*',$hex))[1]);
}
?>

This may be useful for arduino interface with php.
manasseh at smartcomputerinc.com
5 years ago
I found that 00000000 hex was converting to 1.0 decimal. From the Wikipedia article on IEEE-754 floating point:

The true significand includes 23 fraction bits to the right of the binary point and an implicit leading bit (to the left of the binary point) with value 1 unless the exponent is stored with all zeros.

In hex2float32n, replace:

      $intnumber=bindec("1".$binint);

with

   if ($exp <> -127)
      { $intnumber=bindec("1".$binint); };

and then 00000000 works correctly without affecting "normal" numbers.
francois dot barbier at gmail dot com
6 years ago
As "m dot lebkowski+php at gmail dot com" (http://www.php.net/language.types.float#81416) noted 9 comments below :

When PHP converts a float to a string, the decimal separator used depends on the current locale conventions.

However, to declare a floating point number, one must always use a full stop otherwhise the code would be locale dependent (imagine the nightmare):
<?php
$float
= 1.5;           // float(1.5)
$float = 1,5;           // Parse error: syntax error, unexpected ','
$float = (float) '1.5'; // float(1.5)
$float = (float) '1,5'; // float(1)
?>

Now, if you have a string containing a localized number, you can convert it back to a floating point number using the following function:
<?php
/**
* Convert a localized number string into a floating point number
*
* @param      string $sNumber The localized number string to convert.
* @return     float The converted number.
*/
function str2num($sNumber)
{
   
$aConventions = localeConv();
   
$sNumber = trim((string) $sNumber);
   
$bIsNegative = (0 === $aConventions['n_sign_posn'] && '(' === $sNumber{0} && ')' === $sNumber{strlen($sNumber) - 1});
   
$sCharacters = $aConventions['decimal_point'].
                  
$aConventions['mon_decimal_point'].
                  
$aConventions['negative_sign'];
   
$sNumber = preg_replace('/[^'.preg_quote($sCharacters).'\d]+/', '', trim((string) $sNumber));
   
$iLength = strlen($sNumber);
    if (
strlen($aConventions['decimal_point']))
    {
       
$sNumber = str_replace($aConventions['decimal_point'], '.', $sNumber);
    }
    if (
strlen($aConventions['mon_decimal_point']))
    {
       
$sNumber = str_replace($aConventions['mon_decimal_point'], '.', $sNumber);
    }
   
$sNegativeSign = $aConventions['negative_sign'];
    if (
strlen($sNegativeSign) && 0 !== $aConventions['n_sign_posn'])
    {
       
$bIsNegative = ($sNegativeSign === $sNumber{0} || $sNegativeSign === $sNumber{$iLength - 1});
        if (
$bIsNegative)
        {
           
$sNumber = str_replace($aConventions['negative_sign'], '', $sNumber);
        }
    }
   
$fNumber = (float) $sNumber;
    if (
$bIsNegative)
    {
       
$fNumber = -$fNumber;
    }
    return
$fNumber;
}
?>

Example:
<?php
setLocale
(LC_ALL, 'fr_BE.UTF-8'); // decimal separator is now a comma
$float = -123456.789;
$string = (string) $float;
var_dump($float);           // float(-123456,789)
var_dump($string);          // string(11) "-123456,789"
var_dump((float) $string);  // float(-123456)
var_dump(str2num($string)); // float(-123456,789)
?>

It also works with strings returned by the number_format() function:
<?php
setLocale
(LC_ALL, 'fr_BE.UTF-8'); // decimal separator is now a comma
$conv = localeconv();
$float = -123456.789;
$string = $conv['int_curr_symbol'].number_format($float, $conv['frac_digits'], $conv['decimal_point'], $conv['thousands_sep']);
var_dump($float);           // float(-123456,789)
var_dump($string);          // string(15) "EUR -123.456,79"
var_dump((float) $string);  // float(0)
var_dump(str2num($string)); // float(-123456,79)
?>
pgarvin76+phpmanual at gmail dot com
6 years ago
When converting from float to string trailing zeros will be dropped. Consider the following example. Tested on PHP 5.3.1.

<?php
$a
= 5.00500;
$b = 30.00;
echo
"a = $a\n";
echo
"b = $b\n";
/* outputs:
a = 5.005
b = 30
*/
?>
rob at willo dot org
6 years ago
PHP will parse ".123" with no leading digit; just a decimal point. For a command-line example:

php -r "echo 1 + .123;"

The regular expression provided above does not parse it.
My correction is:

EXPONENT_DNUM = "[+-]?({DNUM} | ({LNUM} | {DNUM}) [eE][+-]? {LNUM})"

NOTE: {LNUM} by itself is an integer, not a floating point.
nathanb at php dot net
1 year ago
An extremely small and simple example of this is:
<?php
 
echo intval(19.31 * 100);
?>
helly at php dot net
8 years ago
Floating point values have a limited precision. Hence a value might not have the same string representation after any processing. That also includes writing a floating point value in your script and directly printing it without any mathematical operations.

If you would like to know more about "floats" and what IEEE 754 is read this: http://docs.sun.com/source/806-3568/ncg_goldberg.html
reinaldorock at yahoo dot com dot br
4 years ago
Convert locale string into float number

<?php
function str2num($str){
  if(
strpos($str, '.') < strpos($str,',')){
           
$str = str_replace('.','',$str);
           
$str = strtr($str,',','.');           
        }
        else{
           
$str = str_replace(',','',$str);           
        }
        return (float)
$str;
}

str2num('25,01'); //25.01
str2num('2.5,01'); //25.01
str2num('25.01'); //25.01
str2num('2,5.01'); //25.01
?>
TRI0N
10 years ago
Here is a simple formula to break down a number and get rid of the decimal values.  I built this to take a number in seconds and convert it to a readable value for Server Uptimes.

<?php
$day
= floor(($uptime / 86400)*1.0) ;
$calc1 = $day * 86400 ;
$calc2 = $uptime - $calc1 ;
$hour = floor(($calc2 / 3600)*1.0) ;
if (
$hour < 10) {
$hour = "0".$hour ;
}
$calc3 = $hour * 3600 ;
$calc4 = $calc2 - $calc3 ;
$min = floor(($calc4 / 60)*1.0) ;
if (
$min < 10) {
$min = "0".$min ;
}
$calc5 = $min * 60 ;
$sec = floor(($calc4 - $calc5)*1.0) ;
if (
$min < 10) {
$sec = "0".$sec ;
}
$uptime2 = $day." Days, ".$hour.":".$min.":".$sec ;
?>

Place this where you want the results to be seen:
<?php echo $uptime2 ; ?>

For a Value of 1455587 seconds the results will show as followed:
16 Days, 20:19:47

Enjoy
To Top