PHP 7.0.6 Released

    SoapClient::SoapClient

    (PHP 5 >= 5.0.1, PHP 7)

    SoapClient::SoapClient — SoapClient constructor

    Description

    public SoapClient::SoapClient ( mixed $wsdl [, array $options ] )

    This constructor creates SoapClient objects in WSDL or non-WSDL mode.

    Parameters

    wsdl

    URI of the WSDL file or NULL if working in non-WSDL mode.

    Note:

    During development, WSDL caching may be disabled by the use of the soap.wsdl_cache_ttl php.ini setting otherwise changes made to the WSDL file will have no effect until soap.wsdl_cache_ttl is expired.

    options

    An array of options. If working in WSDL mode, this parameter is optional. If working in non-WSDL mode, the location and uri options must be set, where location is the URL of the SOAP server to send the request to, and uri is the target namespace of the SOAP service.

    The style and use options only work in non-WSDL mode. In WSDL mode, they come from the WSDL file.

    The soap_version option should be one of either SOAP_1_1 or SOAP_1_2 to select SOAP 1.1 or 1.2, respectively. If omitted, 1.1 is used.

    For HTTP authentication, the login and password options can be used to supply credentials. For making an HTTP connection through a proxy server, the options proxy_host, proxy_port, proxy_login and proxy_password are also available. For HTTPS client certificate authentication use local_cert and passphrase options. An authentication may be supplied in the authentication option. The authentication method may be either SOAP_AUTHENTICATION_BASIC (default) or SOAP_AUTHENTICATION_DIGEST.

    The compression option allows to use compression of HTTP SOAP requests and responses.

    The encoding option defines internal character encoding. This option does not change the encoding of SOAP requests (it is always utf-8), but converts strings into it.

    The trace option enables tracing of request so faults can be backtraced. This defaults to FALSE

    The classmap option can be used to map some WSDL types to PHP classes. This option must be an array with WSDL types as keys and names of PHP classes as values.

    Setting the boolean trace option enables use of the methods SoapClient->__getLastRequest, SoapClient->__getLastRequestHeaders, SoapClient->__getLastResponse and SoapClient->__getLastResponseHeaders.

    The exceptions option is a boolean value defining whether soap errors throw exceptions of type SoapFault.

    The connection_timeout option defines a timeout in seconds for the connection to the SOAP service. This option does not define a timeout for services with slow responses. To limit the time to wait for calls to finish the default_socket_timeout setting is available.

    The typemap option is an array of type mappings. Type mapping is an array with keys type_name, type_ns (namespace URI), from_xml (callback accepting one string parameter) and to_xml (callback accepting one object parameter).

    The cache_wsdl option is one of WSDL_CACHE_NONE, WSDL_CACHE_DISK, WSDL_CACHE_MEMORY or WSDL_CACHE_BOTH.

    The user_agent option specifies string to use in User-Agent header.

    The stream_context option is a resource for context.

    The features option is a bitmask of SOAP_SINGLE_ELEMENT_ARRAYS, SOAP_USE_XSI_ARRAY_TYPE, SOAP_WAIT_ONE_WAY_CALLS.

    The keep_alive option is a boolean value defining whether to send the Connection: Keep-Alive header or Connection: close.

    The ssl_method option is one of SOAP_SSL_METHOD_TLS, SOAP_SSL_METHOD_SSLv2, SOAP_SSL_METHOD_SSLv3 or SOAP_SSL_METHOD_SSLv23.

    Errors/Exceptions

    SoapClient::SoapClient() will generate an E_ERROR error if the location and uri options aren't provided in non-WSDL mode.

    A SoapFault exception will be thrown if the wsdl URI cannot be loaded.

    Changelog

    Version Description
    5.5.0 New ssl_method option.
    5.4.0 New keep_alive option.

    Examples

    Example #1 SoapClient::SoapClient() example

    <?php

    $client     = new SoapClient("some.wsdl");

    $client = new SoapClient("some.wsdl", array('soap_version'   => SOAP_1_2));

    $client = new SoapClient("some.wsdl", array('login'          => "some_name",
                                                    'password'       => "some_password"));

    $client = new SoapClient("some.wsdl", array('proxy_host'     => "localhost",
                                                    'proxy_port'     => 8080));

    $client = new SoapClient("some.wsdl", array('proxy_host'     => "localhost",
                                                    'proxy_port'     => 8080,
                                                    'proxy_login'    => "some_name",
                                                    'proxy_password' => "some_password"));

    $client = new SoapClient("some.wsdl", array('local_cert'     => "cert_key.pem"));

    $client = new SoapClient(null, array('location' => "http://localhost/soap.php",
                                             'uri'      => "http://test-uri/"));

    $client = new SoapClient(null, array('location' => "http://localhost/soap.php",
                                             'uri'      => "http://test-uri/",
                                             'style'    => SOAP_DOCUMENT,
                                             'use'      => SOAP_LITERAL));

    $client = new SoapClient("some.wsdl", 
      array(    'compression' => SOAP_COMPRESSION_ACCEPT | SOAP_COMPRESSION_GZIP));

    $server = new SoapClient("some.wsdl", array('encoding'=>'ISO-8859-1'));

    class     MyBook {
        public     $title;
        public     $author;
    }

    $server = new SoapClient("books.wsdl", array('classmap' => array('book' => "MyBook")));

    ?>

    User Contributed Notes

    bhargav dot khatana at gmail dot com
    6 years ago
    It took me longer than a week to figure out how to implement WSSE (Web Service Security) headers in native PHP SOAP. There are no much resource available on this, so thought to add this here for community benefit.

    Step1: Create two classes to create a structure for WSSE headers

    <?php
    class clsWSSEAuth {
              private     $Username;
              private     $Password; 
            function     __construct($username, $password) {
                         $this->Username=$username;
                         $this->Password=$password;
                  }
    }

    class     clsWSSEToken {
            private     $UsernameToken;
            function     __construct ($innerVal){
                    $this->UsernameToken = $innerVal;
            }
    }
    ?>

    Step2: Create Soap Variables for UserName and Password

    <?php
    $username     = 1111;
    $password = 1111;

    //Check with your provider which security name-space they are using.
    $strWSSENS = "http://schemas.xmlsoap.org/ws/2002/07/secext";

    $objSoapVarUser = new SoapVar($username, XSD_STRING, NULL, $strWSSENS, NULL, $strWSSENS);
    $objSoapVarPass = new SoapVar($password, XSD_STRING, NULL, $strWSSENS, NULL, $strWSSENS);
    ?>

    Step3: Create Object for Auth Class and pass in soap var

    <?php
    $objWSSEAuth     = new clsWSSEAuth($objSoapVarUser, $objSoapVarPass);
    ?>

    Step4: Create SoapVar out of object of Auth class

    <?php
    $objSoapVarWSSEAuth     = new SoapVar($objWSSEAuth, SOAP_ENC_OBJECT, NULL, $strWSSENS, 'UsernameToken', $strWSSENS);
    ?>

    Step5: Create object for Token Class

    <?php
    $objWSSEToken     = new clsWSSEToken($objSoapVarWSSEAuth);
    ?>

    Step6: Create SoapVar out of object of Token class

    <?php
    $objSoapVarWSSEToken     = new SoapVar($objWSSEToken, SOAP_ENC_OBJECT, NULL, $strWSSENS, 'UsernameToken', $strWSSENS);
    ?>

    Step7: Create SoapVar for 'Security' node

    <?php
    $objSoapVarHeaderVal    =new SoapVar($objSoapVarWSSEToken, SOAP_ENC_OBJECT, NULL, $strWSSENS, 'Security', $strWSSENS);
    ?>

    Step8: Create header object out of security soapvar

    <?php
    $objSoapVarWSSEHeader     = new SoapHeader($strWSSENS, 'Security', $objSoapVarHeaderVal,true, 'http://abce.com');

    //Third parameter here makes 'mustUnderstand=1
    //Forth parameter generates 'actor="http://abce.com"'
    ?>

    Step9: Create object of Soap Client

    <?php
    $objClient     = new SoapClient($WSDL, $arrOptions);
    ?>

    Step10: Set headers for soapclient object

    <?php
    $objClient    ->__setSoapHeaders(array($objSoapVarWSSEHeader));
    ?>

    Step 11: Final call to method

    <?php
    $objResponse     = $objClient->__soapCall($strMethod, $requestPayloadString);
    ?>
    joshua at wiredrive dot com
    1 year ago
    As of 5.5, ssl_method defaults to SOAP_SSL_METHOD_SSLv23. Just wanted to add this because it was not explicitly specified above.
    michael dot arnauts at gmail dot com
    2 years ago
    This doesn't seem to be documented, but when you want to use compression for your outgoing requests, you have to OR with the compression level:

    <?php
    $client     = new SoapClient("some.wsdl",
      array(    'compression' => SOAP_COMPRESSION_ACCEPT | SOAP_COMPRESSION_GZIP | 9));
    ?>

    This can be really usefull if you want to send large amounts of data.

    Source: https://bugs.php.net/bug.php?id=36283
    lsmith at php dot net
    9 years ago
    As noted in the bug report http://bugs.php.net/bug.php?id=36226, it is considered a feature that sequences with a single element do not come out as arrays. To override this "feature" you can do the following:

    $x = new SoapClient($wsdl, array('features' =>
    SOAP_SINGLE_ELEMENT_ARRAYS));
    Peter
    1 year ago
    if you need to use ws-security with a nonce and a timestamp, you can use this :

    <?php

    class WsseAuthHeader extends SoapHeader {

    private     $wss_ns = 'http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd';
    private     $wsu_ns = 'http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd';

    function     __construct($user, $pass) {

            $created = gmdate('Y-m-d\TH:i:s\Z');
            $nonce = mt_rand();
            $passdigest = base64_encode( pack('H*', sha1( pack('H*', $nonce) . pack('a*',$created).  pack('a*',$pass))));

            $auth = new stdClass();
            $auth->Username = new SoapVar($user, XSD_STRING, NULL, $this->wss_ns, NULL, $this->wss_ns);
            $auth->Password = new SoapVar($pass, XSD_STRING, NULL, $this->wss_ns, NULL, $this->wss_ns);
            $auth->Nonce = new SoapVar($passdigest, XSD_STRING, NULL, $this->wss_ns, NULL, $this->wss_ns);
            $auth->Created = new SoapVar($created, XSD_STRING, NULL, $this->wss_ns, NULL, $this->wsu_ns);

            $username_token = new stdClass();
            $username_token->UsernameToken = new SoapVar($auth, SOAP_ENC_OBJECT, NULL, $this->wss_ns, 'UsernameToken', $this->wss_ns);

            $security_sv = new SoapVar(
            new     SoapVar($username_token, SOAP_ENC_OBJECT, NULL, $this->wss_ns, 'UsernameToken', $this->wss_ns),
                SOAP_ENC_OBJECT, NULL, $this->wss_ns, 'Security', $this->wss_ns);
            parent::__construct($this->wss_ns, 'Security', $security_sv, true);
    }
    }

    ?>

    and with your SoapClient do :

    <?php
    $client     = new SoapClient("http://host/path");
    $client->__setSoapHeaders(Array(new WsseAuthHeader("user", "pass")));
    ?>

    works for me. based on a stackoverlfow post which only did the username and password, not the nonce and the timestamp
    simonlang at gmx dot ch
    5 years ago
    Example for a soap client with HTTP authentication over a proxy:

    <?php
    new SoapClient(
            'service.wsdl',
        array(
                // Stuff for development.
                'trace' => 1,
                'exceptions' => true,
                'cache_wsdl' => WSDL_CACHE_NONE,
                'features' => SOAP_SINGLE_ELEMENT_ARRAYS,

                // Auth credentials for the SOAP request.
                'login' => 'username',
                'password' => 'password',

                // Proxy url.
                'proxy_host' => 'example.com', // Do not add the schema here (http or https). It won't work.
                'proxy_port' => 44300,

                // Auth credentials for the proxy.
                'proxy_login' => NULL,
                'proxy_password' => NULL,
        )
    );
    ?>

    Providing an URL to a WSDL file on the remote server (which as well is protected with HTTP authentication) didn't work. I downloaded the WSDL and stored it on the local server.
    tatupheba at gmail dot com
    5 years ago
    Hello folks!

    A hint for developers:

    When programming some soap server set the "soap.wsdl_cache_enabled" directive in php.ini file to 0:

    soap.wsdl_cache_enabled=0

    Otherwise it will give a bunch of strange errors saying that your wsdl is incorrect or is missing.

    Doing that will save you from a lot of useless pain.
    james dot ellis at gmail dot com
    8 years ago
    A note regarding boolean values that may seem obvious on reflection but could be a gotcha for some:

    Seeing a SOAP request example with <SomeBooleanParam>true</SomeBooleanParam> may lead you to pass in string "true" or "false" as the parameter, which is incorrect - the correct method is to use boolean data types.

    <?php
    $client     = new SoapClient($wsdl,$options);
    $method = "DoSomething";
    $params = new stdClass;

    $params->SomeBooleanParam = TRUE;
    $client->$method($params);
    /**
    simplified request snippet would be
    <SomeBooleanParam>true</SomeBooleanParam>
    **/

    //this will also be correct, but not for the right reasons:
    $params->SomeBooleanParam = "true";
    $client->$method($params);
    /**
    simplified request snippet would be
    <SomeBooleanParam>true</SomeBooleanParam>
    **/

    //this is where you may be wondering what is going on
    $params->SomeBooleanParam = "false";
    $client->$method($params);
    /**
    simplified request snippet would be
    <SomeBooleanParam>true</SomeBooleanParam>
    **/

    //you need to do this instead
    $params->SomeBooleanParam = FALSE;
    $client->$method($params);
    /**
    simplified request snippet would be
    <SomeBooleanParam>false</SomeBooleanParam>
    **/
    ?>

    Hope that helps!
    taras dot dot dot di at gmail dot com
    7 years ago
    This took me a while to figure out.

    As described at the bottom of here: http://bugs.php.net/bug.php?id=38703

    having xdebug may interfere with the constructor throwing exceptions
    jan at bestbytes dot de
    7 years ago
    You CAN get a wsdl, if basic authentication is required:

    <?php

    $login     = 'bert';
    $password = 'berts password';

    $client = new SoapClient(
            'http://' . urlencode($login) . ':' . urlencode($password) . '@www.server.com/path/to/wsdl',
        array(
                'login' => $login,
                'password' => $password
            )
    );

    ?>
    Asaf Meller
    5 years ago
    a full working php .net soap configuration :
    notes
    1. web.config on .net server must work with basichttp binding.
    2. paramaters to soap functions must be passed as :
    array ('parm1_name'=>'parm1_value',
             'parm2_name'=>'parm2_value'...)

    <?php
    header    ('Content-Type: text/plain');

    try {
                    $options = array(
                        'soap_version'=>SOAP_1_1,
                        'exceptions'=>true,
                        'trace'=>1,
                        'cache_wsdl'=>WSDL_CACHE_NONE
                    );
                    $client = new SoapClient('http://www.example.com/end_point.wsdl', $options);
            // Note where 'Get' and 'request' tags are in the XML
               
                } catch (Exception $e) {
                echo     "<h2>Exception Error!</h2>";
                echo     $e->getMessage();
            }

    echo     'running HelloWorld :';                                     

    try {
           $response=$client->HelloWorld();
      
      
    }
    catch (    Exception $e)
    {
        echo     'Caught exception: ',  $e->getMessage(), "\n";
    }

    print_r($response);
    ?>

    good luck !
    Asaf.
    Chris Gunawardena
    4 years ago
    To monitor SOAP calls in and out of a unix server:

    sudo tcpdump -nn -vv -A -s 0 -i eth0 dst or src host xxx.xxx.xxx.xxx and port 80

    And always use 'cache_wsdl' => WSDL_CACHE_NONE
    Marius Mathiesen
    10 years ago
    I kept having a problem using an HTTP proxy with SOAP. The proxy_port parameter has to be an integer, ie. "proxy_port"=>"80" won't work, you'll have to use "proxy_port"=>80.

    HTH,
    Marius
    Arjan van Bentem
    10 years ago
    When using HTTP basic authentication, PHP will only send the credentials when invoking the service, not when fetching the WSDL.

    To solve this, one needs to fetch the WSDL manually (or using PHP, of course!) and store it on the file system. Obviously, the first parameter for SoapClient(..) then needs to refer to that local copy.

    Alternatively, the user annotations at http://nl3.php.net/manual/en/ref.soap.php state that one could encode the login and password into the URL as well.

    See http://bugs.php.net/bug.php?id=27777
    tolean dot dj at gmail dot com
    2 years ago
    Here's a function for easier debugging:

    <?php
    function soapDebug($client){

            $requestHeaders = $client->__getLastRequestHeaders();
            $request = prettyXml($client->__getLastRequest());
            $responseHeaders = $client->__getLastResponseHeaders();
            $response = prettyXml($client->__getLastResponse());

        echo     '<code>' . nl2br(htmlspecialchars($requestHeaders, true)) . '</code>';
        echo     highlight_string($request, true) . "<br/>\n";

        echo     '<code>' . nl2br(htmlspecialchars($responseHeaders, true)) . '</code>' . "<br/>\n";
        echo     highlight_string($response, true) . "<br/>\n";
    }

    $client = new SoapClient(null, array(
            'location' => 'http://sita.local/_mpay/server.php',
            'uri' => 'http://sita.local/_mpay/',
            'trace' => 1,
    ));

    $result = $client->__soapCall('getDate', array('format' => 'Y-m-d H:i:s'));
    soapDebug($client);
    ?>
    pgl at yoyo dot org
    3 years ago
    Note that if libxml_disable_entity_loader() has been called, you cannot specify a WSDL file - you'll get an error that PHP "failed to load external entity".

    To resolve this, add

    <?php
    libxml_disable_entity_loader    (false);
    ?>

    Above any calls to instantiate SoapClient.
    meltir at meltir dot com
    6 years ago
    To those fighting with NTLM authenticated proxy servers, here's a solution I'm using atm:

    <?php
    /**
    * A child of SoapClient with support for ntlm proxy authentication
    *
    * @author Meltir <meltir@meltir.com>
    *
    */
    class NTLM_SoapClient extends SoapClient {
       
        public function     __construct($wsdl, $options = array()) {
            if (empty(    $options['proxy_login']) || empty($options['proxy_password'])) throw new Exception('Login and password required for NTLM authentication!');
                $this->proxy_login = $options['proxy_login'];
                $this->proxy_password = $options['proxy_password'];
                $this->proxy_host = (empty($options['proxy_host']) ? 'localhost' : $options['proxy_host']);
                $this->proxy_port = (empty($options['proxy_port']) ? 8080 : $options['proxy_port']);
                parent::__construct($wsdl, $options);
        }
       
            /**
         * Call a url using curl with ntlm auth
         *
         * @param string $url
         * @param string $data
         * @return string
         * @throws SoapFault on curl connection error
         */
            protected function callCurl($url, $data) {
            $handle   = curl_init();
            curl_setopt($handle, CURLOPT_HEADER, false);
            curl_setopt($handle, CURLOPT_URL, $url);
            curl_setopt($handle, CURLOPT_FAILONERROR, true);
            curl_setopt($handle, CURLOPT_HTTPHEADER, Array("PHP SOAP-NTLM Client") );
            curl_setopt($handle, CURLOPT_RETURNTRANSFER, true);
            curl_setopt($handle, CURLOPT_POSTFIELDS, $data);
            curl_setopt($handle, CURLOPT_PROXYUSERPWD,$this->proxy_login.':'.$this->proxy_password);
            curl_setopt($handle, CURLOPT_PROXY, $this->proxy_host.':'.$this->proxy_port);
            curl_setopt($handle, CURLOPT_PROXYAUTH, CURLAUTH_NTLM);
            $response = curl_exec($handle);
        if (empty(    $response)) {
          throw new     SoapFault('CURL error: '.curl_error($handle),curl_errno($handle));
        }
            curl_close($handle);
        return     $response;
        }
       
        public function     __doRequest($request,$location,$action,$version,$one_way = 0) {
            return     $this->callCurl($location,$request);
        }
       
    }
    ?>

    Requires curl and could be extended, but it works for my simple needs.
    marcovtwout at hotmail dot com
    5 years ago
    Being new to SOAP, I was searching for a while to find out why my message was getting a response in soapUI, but not with my php code. The specific service I was addressing gives a HTTP 202 Accepted on success (no response), but returns a SOAP message on errors.

    Situation:
    Using an (authenticated) client connection, and a WDSL file, SOAP calls with type "One-Way" don't give a response header, even though a response is expected.

    Solution:
    When calling the client constructor, set SOAP_WAIT_ONE_WAY_CALLS in the $options['features'].
    php at sowen dot de
    10 years ago
    If you're using CLI and there are multiple IP addresses available for outgoing SOAP-requests, try this "secret" to set outgoing IP:

    e.g. for local IP 10.1.4.71:

    $opts = array('socket' => array('bindto' => '10.1.4.71:0'));
    $context = stream_context_create($opts);
    $client  = new SoapClient(null, array('location'=>'http://...','uri' => '...','stream_context' => $context));

    You can also set other options for the stream context, please refer to this page:

    Appendix M: http://www.php.net/manual/en/wrappers.php

    Bye,
       Nils Sowen
    Jim Plush
    10 years ago
    As of version 5.0.4 you can now dynamically change your location even if you're using a wsdl

    <?php

    $client     = new SoapClient("http://some.host.net/wsdl/somefile.wsdl",array(
            "location" => 'myurl.com'));

    ?>

    notice you can now use the "location" key.
    This means you can have the same wsdl file not define a location until runtime which is great if you have a development test site or if you distribute your files to other companies.
    Prior to this change you would have to ship a custom wsdl file to every client you had with their location hardcoded.
    softontherocks at gmail dot com
    1 year ago
    I posted in this URL http://softontherocks.blogspot.com/2014/02/web-service-soap-con-php.html a full example of a nusoap web service.

    There is defined the server and the client who calls the web service.

    I hope it would be useful for you.
    cdesully at webslicer dot com
    1 month ago
    I found a good use for typemap.  When using classmap any xml tags that had attributes, attribute values were not captured, so a typemap allows you to override how a class gets implemented and being able to get any attributes not previously captured.

    <ItemList>
        <Item productId="1234">
            <feature>red</feature>
        </Item>
        <Item productId="5678">
            <feature>blue</feature>
        </Item>
    </ItemList>

    <?php //semi-pseudo code
    namespace ExampleNS;

    class     ItemList {
        public     $item = [];
    }
    class     Item {
        public     $productId;
        public     $feature;
    }

    class     Service {
        public function     __construct(){
                $options = [
                    'classmap' => [
                        'ItemList' => 'ExampleNS\ItemList',
                        'Item' => 'ExampleNS\Item'
                    ],
                    'typemap'=>[
                        'type_ns' => 'http://some.wsdl.ns/sdo',
                        'type_name' => 'Item',
                        'from_xml' => [__CLASS__,'newConversion']
                ]
            ];
        }

        public function     newConversion($xml){
            return     simplexml_load_string($xml);
                //or more appropriately dig into the simplexml object and
            //instantiate the correct classes intended to be defined and
           //return those
            }
    }
    ?>
    Anonymous
    4 months ago
    After installing PHP 7 on my test server I was receiving a 500 - Internal Server error when instantiating a new SoapClient. If there's an existing wsdl cache file, it needs to be deleted.
    omidkosari at yahoo dot com
    10 months ago
    To solve the problem with a lot of FIN_WAIT2 or CLOSE_WAIT , you should use the option keep_alive=false
    champetier dot etienne at gmail dot com
    1 year ago
    When using classmap, never put a fully qualified classname (starting with \)
    there is a bug (https://bugs.php.net/bug.php?id=69280)
    info at nospam x valiton x com
    1 year ago
    CAUTION:
    I had quite a bit of trouble trying to make a request with fopen through a proxy to a secure url.  I kept getting a 400 Bad Request back from the remote host.  It was receiving the proxy url as the SNI host.  In order to get around this I had to explicity set the SNI host to the domain I was trying to reach.  It's apparently the issue outlined in this bug:

    https://bugs.php.net/bug.php?id=63519

    <?php
    $domain     = parse_url($file, PHP_URL_HOST);
    $proxy_string = "tcp://" . WP_PROXY_HOST  . ":" . WP_PROXY_PORT;
    $opts = array(
            'http' => array( 'proxy' => $proxy_string ),
            'ssl' => array( 'SNI_enabled' => true, 'SNI_server_name' => $domain));
    $context = stream_context_create($opts);
    $handle = fopen( $file, 'r', false, $context );
    ?>

    src:
    http://php.net/manual/en/context.http.php#114314
    francesco [at] paladinux [dot] net
    3 years ago
    Where you have the problem of
    "looks like we got no XML document SoapClient", really the real problem is the xml code from remote server is not clear (after last tag is possible that you have space or other caracter that the your supplier of service have lost :  no one is perfect!)
    I've read some solution, like here, but you must to know that is possible, that is possible that the remote server don't wrong, and the "surplus" (latin word for added values) is needed.
    In particolar with axis Java server, is possible that the configuration of server is needed and the "surplus" is one or more attachments...
    The solution is 3:
    1) contact your supplier if is possible to remove caracter if is an error (good luck! ;) )
    2) use another class like nusoap resolve the problem (but has other problem!)
    3) this technical solution:
    when call the wsdl be sure that the option trace and exceptions are setted (the first true and the second false)

    <?php
    $SoapClient     = new SoapClient(NULL,
              array(
    ....
                    'trace'          => 1,
                'exceptions'      => 0
                  )
    ?>
    (if you don't do that you can't use the __getLastResponse)

    Now You can do the request and use __getLastResponse() to obtain all the part..
    <?php
    $result      = $SoapClient -> problematicCall($par);
    ?>

    After all  you obtain a variable like that:

    -----=_Part_9325_126764118.1363377774664
    Content-Type: text/xml; charset=UTF-8
    Content-Transfer-Encoding: binary
    Content-Id: <1C06F7FBA057796C5A6185605F9F93E4>

    <?xml version="1.0" encoding="utf-8"?><...etc >&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&gt;

    &lt;MESSAGGIO&gt;
      &lt;DA&gt;MI&lt;/DA&gt;
      &lt;A&gt;PALADINUX&lt;/A&gt;
      &lt;ID&gt;12345&lt;/ID&gt;
      &lt;TIPODOC&gt;RC&lt;/TIPODOC&gt;
      &lt;RISPOSTA&gt;
    &lt;/MESSAGGIO&gt;
    </rxproblematicCallReturn></ns1:rxCatalogoMaterialiResponse></soapenv:Body></soapenv:Envelope>
    ------=_Part_9325_126764118.1234567890123
    Content-Type: application/zip
    Content-Transfer-Encoding: binary
    Content-Id: <43E91F7E7PALADINUXE07BF041A7BAC9>
    -------------------------

    Is easy understand if the added part is needed or not!
    Now you can explode all the part and parse!

    Hope this can help you.See ya in the cyberspace!
    info at nicksilvestro dot net
    7 years ago
    For anyone having trouble with ArrayOf_xsd_string and getting an error similar to 'No deserializer defined for array type {http://www.w3.org/2001/XMLSchema}string'
    Try using the 'features' param, set to SOAP_USE_XSI_ARRAY_TYPE - this makes sure the correct deserializer is used.

    eg,
    <?php
    $client     = new SoapClient("some.wsdl", array('features' => SOAP_USE_XSI_ARRAY_TYPE));
    ?>
    ale dot comp_06 at xox dot ch
    3 years ago
    If your service is protected through basic http authentication and you're not using wsdl, you will have to put the login in the SoapClient's option:

    <?php
    $client     = new SoapClient(
            null,
        array(
                'soap_version' => SOAP_1_2,
                'location' => ...
            ...,
                'login' => 'username',
                'password' => '*******',
        )
    );
    ?>
    ajcartmell at fonant dot com
    5 years ago
    There seems to be a problem with specifying empty strings for proxy_host and proxy_port options in recent versions of PHP (from a version later than 5.2.9, and equal to or earlier than 5.2.11).

    Supplying empty string values for proxy_host and proxy_port causes "host not found" type errors: supplying NULL or FALSE works fine.
    chris at phblock dot atNoSpam
    4 years ago
    this is the syntax of typemap (found at http://svn.php.net/viewvc/php/php-src/trunk/ext/soap/tests/typemap012.phpt?view=markup)
    <?php
    $options    =Array(
    'typemap' => array(
    array(    "type_ns"  => "http://schemas.nothing.com",
                 "type_name" => "soap",
                 "to_xml"  => "some_funktion_name")
    ));
    ?>
    titan at phpdevshell dot org
    5 years ago
    It should be noted that if you receive a return error : 'Object reference not set to an instance of an object.'. This could be due to something as simple as passing the incorrect parameters. When you look at this XML:

        <Get xmlns="http://example.com">
          <request>
            <CustomerId>string</CustomerId>
            <From>dateTime</From>
            <To>dateTime</To>
          </request>
        </Get>

    Your code should look something like this:

    <?php
                try {
                    $options = array(
                        'soap_version'=>SOAP_1_2,
                        'exceptions'=>true,
                        'trace'=>1,
                        'cache_wsdl'=>WSDL_CACHE_NONE
                    );
                    $client = new SoapClient('http://example.com/doc.asmx?WSDL', $options);
    // Note where 'Get' and 'request' tags are in the XML
                    $results = $client->Get(array('request'=>array('CustomerId'=>'1234')));
            } catch (    Exception $e) {
                echo     "<h2>Exception Error!</h2>";
                echo     $e->getMessage();
            }

    $results = $client->Get(array('request'=>array('CustomerId'=>'842115')));
    ?>
    marcovtwout at hotmail dot com
    5 years ago
    If your WSDL file containts a parameter with a base64Binary type, you should not use base64_encode() when passing along your soap vars. When doing the request, the SOAP library automatically base64 encodes your data, so otherwise you'll be encoding it twice.

    WSDL snipplet:
    <element name="content" type="base64Binary" xmime:expectedContentTypes="*/*"/>

    <?php
    $string     = 'data_you_want_to_send___like_xml_in_soap';
    $soap_data = array(
                'foo' => 'bar',
              //'content' => base64_encode($string ) // don't do this
                'content' => $string //do this
    );
    $response = $client->Send($soap_data);
    ?>
    tim at tdinternet dot com
    5 years ago
    PHP 5.2.11 seems to not be very picky about the correctness of a WSDL.

    Other SOAP clients were complaining about schema and namespace issues, while PHP's SoapClient worked completely fine.  Fixing those issues for the other clients however broke PHP's SoapClient to the point where objects being passed to the SOAP method were becoming empty arrays on the server side.

    Lesson learned:  some elements were being prefixed with xsd: and others were not -- make absolutely sure your WSDL is correct and consistent (I'm using a tweaked WSDL_Gen.php).
    cw at netresearch dot de
    8 years ago
    The "cache_wsdl" option takes constants like WSDL_CACHE_NONE or WSDL_CACHE_DISK that are listed on the "SOAP constants" page -> /manual/en/soap.constants.php
    Anonymous
    6 years ago
    I had to struggle with a rather strange behavior when trying to consume standard Parlay X web services with no success. However, I found a remedy to my problem.

    The problem which I faced was about an erroneous invalid HTTP basic authentication request sent to the web service. Although I was sending the right credentials, I was getting an authentication error. It turns out that PHP was sending HTTP requests to another endpoint which is not exposed directly through the web service and that end point does not require authentication.

    My remedy for that issue was by using this simple lines in the example of using sendSms Paraly-X method.

    First, creating a soap client without any HTTP authentication options:

    <?php
    $client     = new SoapClient($wsdl_url);            
    ?>

    The above request will cache the wsdl in the /tmp directory. Immediately after this construction we create another soap client, this time with HTTP authentication options:

    <?php
    try {                                           
                $client = new SoapClient($wsdl_url, array('login' => "griffin",
                                                    'password'       => "password"));
    } catch (    Exception $e) {                          
                printf("Error:sendSms: %s\n",$e->__toString());
            return     false;                             
    }
    ?>

    Now it should work without any problem. Without the second call, PHP will call sendSms without credentials resulting in a failed attempt due to missing authentication information. I found this procedure to be the simplest.

    This process should be done every time the cached wsdl expires, or simply a one can increase the time-to-live for the cached wsdl from php.ini
    jon dot gilbert at net-entwicklung dot de
    6 years ago
    Note that creating a soap client for an invalid URL (you do test what happens, when a service is not available, right?) usually throws an exception which can be caught with try..catch. However, if xdebug is active you will get a fatal error, which obviously cannot be caught.
    sloloem at gmail dot com
    6 years ago
    I had an issue figuring out the use of classmap that took me quite a while to figure out.  I was assuming the WSDL type the docs were referring to was the name of the element being returned in the SOAP, so like,
    <ns1:node id="8675309" />

    and I was wondering why mapping
    'classmap'=>array('node'=>'MyNode')

    did nothing.
    That's because in my WSDL I defined node as:

    <xsd:element name="node" type="tns:nodeType" />

    The classmap I needed was:
    'classmap'=>array('nodeType'=>'MyNode')

    I was able to find the type names using SoapClient->__getTypes()
    Later, I realized where I could look inside the WSDL for the typename I needed.

    I dunno if I missed something painfully obvious but maybe this can clear up some of the docs.
    Jon
    6 years ago
    We've had some problems using SoapClient connecting to an external server via Microsoft ISA (presently v.2006 but this may apply to other versions too). We supply the proxy_host, proxy_port, proxy_login and proxy_password but the ISA server reports the login in its logs as "anonymous".

    Our sysadmin believes this is because PHP is not supplying NTLN information (Windows security protocol) in the correct format (and whether it should work with proprietary proxies is of course another debate). We'd tried "username", "DOMAIN\username" to no effect. The solution is to add an exception in the ISA server for the target hostname/IP; null can then be supplied for proxy_login and proxy_password and the connection should then work as expected.

    On a slightly related note, if you are having problems make sure the port number is supplied as an integer. Some versions of PHP will not use the proxy with SoapClient if the port number is supplied as a string.
    sniper
    7 years ago
    i was looking for a good example and couldnt find one,
    finally found it somewhere(forgot where) i think this is
    the best example to make a soap request with multiple params
      
    $params->AWSAccessKeyId = AMAZON_API_KEY;
    $params->Request->SearchIndex = 'Books';
    $params->Request->Keywords = 'php5 oop';

    $amazon = new SoapClient('http://webservices.amazon.com
    /AWSECommerceService/AWSECommerceService.wsdl');
    $result = $amazon->itemSearch($params);
    alex on reutone comma com
    7 years ago
    To connect PHP SOAP to MS SOAP (CRM/EXCHANGE/...) I have created some classes using the explanation below and in other places.
    www.reutone.com/heb/articles.php?instance_id=62&actions=show&id=521
    james dot ellis at gmail dot com
    5 years ago
    I was having troubles getting responses from a Coldfusion SOAP server, with no obvious issues in the SoapClient used.

    Eventually I found that the server was only accepting SOAP 1.1 requests and not 1.2. Not sure if this is  a system wide Coldfusion setting but if you hit the same wall, try setting the SoapClient option "soap_version" to the constant SOAP_1_1 (which is the default but mine was defaulting to 1.2 as the client was being reused for another service)
    naugtur at gmail dot com
    7 years ago
    SoapFault exception: [Client] looks like we got no XML document in <document> has been already mentioned to occur when your server outputs something before <?xml ... > tag.

    For all those having problems with that, and no access to the server code:
    This is how to make a proxy that would clean responses for You

    <?php
    /**
    * Simple class taken from a note by James Ellis [in __doRequest() page of manual]
    */
    class Proxy_Client extends SoapClient {
        protected     $cacheDocument = "";
        public function     __construct($wsdl, $options) {
                parent::__construct($wsdl, $options);
        }

            /**
         * SetCacheDocument() sets the previously cached document contents
         */
            public function SetCacheDocument($document) {
                $this->cacheDocument = $document;
        }

            /**
         * __doRequest() overrides the standard SoapClient to handle a local request
         */
            public function __doRequest() {
            return     $this->cacheDocument;
        }
    }

    //put this code in your function or wherever You have all required variables set

    $client = new SoapClient($wsdl_url,$settings_array);
    $void=$client->$method($params);  //call this to get response from server
           
    $response_string=$client->__getLastResponse();
           
    //this part removes stuff
    $start=strpos($response_string,'<?xml');
    $end=strrpos($response_string,'>');   
    $response_string=substr($response_string,$start,$end-$start+1);

    //get your proxy prepared
    $proxy = new Proxy_Client($wsdl_url,$settings_array);
    //and fill it with the server's response
    $proxy->SetCacheDocument($response_string);

    $and_finally_the_result_is=$proxy->$method($params);

    print_r($and_finally_the_result_is); //this allows You to see what's there

    ?>

    $method is the method's name eg. $method='getVersion';
    $params - typical params for a soap method
    david at globulebleu dot com
    7 years ago
    When using classmap option to map the SOAP results to a class, the constructor
    of the object you've mapped to is not called.

    $client = new SoapClient("url_to_wsdl",
       array('classmap' => array('contact' => "Contact"));

    $params = array("1");

    $contact = $client->__soapCall("get_contact", $params);

    Expected result:

    A contact object that has properties initialized (i.e. db connections,
    ....).

    Actual result:

    A contact object without the properties.

    Thanks for your help.

    David Georges.
    Anno v. Heimburg
    7 years ago
    > When using HTTP basic authentication, PHP will only send
    > the credentials when invoking the service, not when
    > fetching the WSDL.

    The same goes for using an SSL client certficate, the SoapClient will only present the certificate on the actual remote call, not when getting the WSDL. The workaround is the same as above. HttpRequest works as expected.
    eric dot caron at gmail dot com
    6 years ago
    Though pointed out by jan at bestbytes, and discussed in bug #27777, one common source of the "Parsing WSDL: Couldn't find <definitions>" error is from trying to access a WSDL that is protected by HTTP authentication. Passing the login/password in the 2nd parameter doesn't always work; so if you encounter this error message and are trying to access a protected WSDL file, try passing the username and password in with the first parameter.
    giosh94mhz
    8 years ago
    Oops!

    I have written the wrong exception message in my last post.

    The correct exception is:

    SoapFault exception: [Client] looks like we got no XML document in <document>
    matt_schiros at academicsuperstore dot com
    9 years ago
    When using classmap to map the SOAP results to a class, the constructor of the object you've mapped to is _not_ called.  This applies to the PHP5 __construct() and the PHP4 ClassName() constructors.
    jared at ws-db dot com
    10 years ago
    If you connect to a SoapServer, that has been created with session persistence, you can access the server's session id via SoapClient->_cookies[<session_id_name>][0]. This property becomes available after your first client method call.

    I have only tested this with session.use_cookies=1.
    Brian Grayless
    11 years ago
    Using a WSDL file is the way to go, however, for my particular application, the LOCATION:PORT needed to be dynamic so that my SOAP clients would be able to call a different service based on the client domain.

    If you are using a WSDL, SoapClient() requires a URL direct to an actual URL and does not let you use a PHP file that outputs the dynamic WSDL XML in its stead. So, I ended up making a separate WSDL for each possible service needed and had to maintain them all if the service description changed.

    Finally, after some fiddling, I was able to create a PHP page with the proper Mime type headers so that I could then trick SoapClient() to think that it was being passed a file with a ".wsdl" extension.

    Example:

    <?php

    // filename: wsdl.php

    header('Content-Type: application/xml; charset=UTF-8');
    header('Content-Disposition: attachment; filename="filename.wsdl"');

    $wsdl = 'path/wsdl_name.wsdl';

    // read in file
    $handle = fopen($wsdl, "r");
    $wsdl_xml = fread($handle, filesize($wsdl));
    fclose($handle);

    // put code here to replace url and port in xml

    echo $wsdl_xml;

    ?>

    Now, in order to make this work, you can't just call a relative path to the file. I believe it has to go through Apache to properly set the mime type headers, etc... So you would use a full "http://....." address as the path to the wsdl.php file.

    <?php

    //... somewhere in your soap client code

    $wsdl_loc = "http://yourdomain.com/wsdl.php";

    $soap_client = new SoapClient($wsdl_loc, $client_param_array);

    ?>

    Another, perhaps not so clean, way of achieving this would be to modify your .htaccess file in the directory where your WSDL file exists to force ".wsdl" files to run through the PHP engine. Add the following to your .htaccess:

    AddType application/x-httpd-php .php .wsdl

    You can then put dynamic PHP code snippets in your *.wsdl files to change whatever values you need to.

    There are pros and cons to each solutions. The Mime solution probably taxes the system more as it has to read the file in every time a soap request is made. The htaccess solution makes it so you have to depend on either a modified .htaccess or Apache conf file.

    Perhaps if you set the "soap.wsdl_cache_enabled", using ini_set(), to 1 (default), the caching will make it so it doesn't read the file every time for the Mime solution.
    svenr at selfhtml dot org
    4 years ago
    The "classmap" option actually is a mapping from the "ComplexType" used within the SOAP to your PHP Classes.

    Do not confuse the XML tag names returned for your request with these ComplexTypes. SOAP allows them to be different.

    I had something like this:
    ...
    <soapenv:body>
    <ns1:TagName>
      <ns1:Content>FooBar</ns1:Content>
    </ns1:TagName>
    </soapenv:body>

    TagName is not the key you want to put in your classmap, you have to know the name of the ComplexType this TagName refers to. This info is contained inside the WSDL resource.
    willem dot stuursma at hyves dot nl
    4 years ago
    If you want to use classes in a different namespace in your classmap, just use the backslash in the the target class name.

    Example:
    <?php
    $classmap     = array('result' => 'MyNamespace\\Result');
    ?>

    You need to specify the backslash twice because it is the escape character in strings.
    miguel dot angel dot fuentes dot casanova at gmail dot com
    2 years ago
    Somebody using SoapClient has sometimes a lot of CLOSE_WAIT states?

    It's in a local connection in a openSuse 11 (x86_64, version 11, patchlevel 2) with Apache 2.2.22 and PHP 5.3.15.
    faebu at faebu dot ch
    5 years ago
    I'm experiencing the same problems when trying to load a WDSL fiel which is protected by basic http authentication, since the parameters login and password are just used for the request but not when reading the wdsl file. I just use the following workaround by downloading the xml file to a non-protected location on my server. Please notice that this doesn't support any kind of caching.

    Hope it helps

    <?php
    class SoapAuthClient extends SoapClient {
            /**
         * Since the PHP SOAP package does not support basic authentication
         * this class downloads the WDSL file using the cURL package and
         * creates a local copy of the wdsl on your server.
         * Make sure you provide the following additional parameter in the
         * $options Array:
         * wdsl_local_copy => true
         */
        
            private $cache_dir = '/home/example/htdocs/cache/';
        private     $cache_url = 'http://www.example.com/cache/';
        
        function     SoapAuthClient($wdsl, $options) {
            if (isset(    $options['wdsl_local_copy']) &&
                    $options['wdsl_local_copy'] == true &&
                isset(    $options['login']) &&
                isset(    $options['password'])) {
               
           
                    $file = md5(uniqid()).'.xml';
               
                if ((    $fp = fopen($this->cache_dir.$file, "w")) == false) {
                    throw new     Exception('Could not create local WDSL file ('.$this->cache_dir.$file.')');
                }
                           
                    $ch = curl_init();
                    $credit = ($options['login'].':'.$options['password']);
                    curl_setopt($ch, CURLOPT_URL, $wdsl);
                    curl_setopt($ch, CURLOPT_HTTPAUTH, CURLAUTH_BASIC);
                    curl_setopt($ch, CURLOPT_USERPWD, $credit);
                    curl_setopt($ch, CURLOPT_TIMEOUT, 15);
                    curl_setopt($ch, CURLOPT_FILE, $fp);
                if ((    $xml = curl_exec($ch)) === false) {
                        //curl_close($ch);
                        fclose($fp);
                        unlink($this->cache_dir.$file);
                                   
                    throw new     Exception(curl_error($ch));
                }
               
                    curl_close($ch);
                    fclose($fp);
                    $wdsl = $this->cache_url.$file;
            }
           
           
            unset(    $options['wdsl_local_copy']);
            unset(    $options['wdsl_force_local_copy']);
           
            echo     $wdsl;
                parent::__construct($wdsl, $options);
           
                unlink($this->cache_dir.$file);
        }
    }
    ?>
    reinaldo at mandic dot com dot br
    5 years ago
    You need both certificates, privateKey and publicKey on the same file, on local_cert path to work.

    # cat publicKey.pem privateKey.pem > key.pem
    To Top