Set-ADDomain Mode

Sets the domain mode for an Active Directory domain.

Syntax

Set-ADDomainMode
   [-WhatIf]
   [-Confirm]
   [-AuthType <ADAuthType>]
   [-Credential <PSCredential>]
   [-DomainMode] <ADDomainMode>
   [-Identity] <ADDomain>
   [-PassThru]
   [-Server <String>]
   [<CommonParameters>]

Description

The Set-ADDomainMode cmdlet sets the domain mode for a domain. You specify the domain mode by setting the DomainMode parameter.

The Identity parameter specifies the Active Directory domain to modify. You can identify a domain by its distinguished name, GUID, security identifier (SID), DNS domain name, or NetBIOS name. You can also set the Identity parameter to a domain object variable such as $<localADDomainObject> , or you can pass a domain object through the pipeline to the Identity parameter. For example, you can use the Get-ADDomain cmdlet to retrieve a domain object and then pass the object through the pipeline operator to the Set-ADDomainMode cmdlet.

The Set-ADDomainMode cmdlet always prompts for permission unless you specify Confirm:$False .

Examples

Example 1: Set the domain mode of a specified user to Windows2003Domain

PS C:\> Set-ADDomainMode -Identity user01.com -DomainMode Windows2003Domain

This command sets the DomainMode property of the user01.com domain to Windows2003Domain.

Example 2: Set the domain mode of the current user's domain to Windows2003Domain

PS C:\> $PDC = Get-ADDomainController -Discover -Service PrimaryDC
PS C:\> Set-ADDomainMode -Identity $PDC.Domain -Server $PDC.HostName[0] -DomainMode Windows2003Domain

This example sets the DomainMode of the current logged on user's domain to Windows2003Domain. The set operation targets the PrimaryDC FSMO to apply the update.

Required Parameters

-DomainMode

Specifies the domain functional level of the first domain in the creation of a new forest. Supported values for this parameter can be either a valid integer or a corresponding enumerated string value. For example, to set the domain mode level to Windows Server 2008 R2, you can specify either a value of 4 or Windows2008R2Domain .

The following are the currently supported values:

--Windows Server 2000: 0 or Windows2000Domain --Windows Server 2003 Interim Domain: 1 or Windows2003InterimDomain --Windows Server 2003: 2 or Windows2003Domain --Windows Server 2008: 3 or Windows2008Domain --Windows Server 2008 R2: 4 or Windows2008R2Domain --Windows Server 2012: 5 or Windows2012Domain --Windows Server 2012 R2: 6 or Windows2012R2Domain

The domain functional level cannot be lower than the forest functional level, but it can be higher. The functional level can be increased, and also decreased as long as no feature that requires that functional level is in use, such as the Active Directory Recycle Bin. The default is automatically computed and set.

Type: ADDomainMode
Parameter Sets: Windows2000Domain, Windows2003InterimDomain, Windows2003Domain, Windows2008Domain, Windows2008R2Domain, Windows2012Domain, Windows2012R2Domain, Windows2016Domain, UnknownDomain
Position: 2
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Identity

Specifies an Active Directory domain object by providing one of the following property values. The identifier in parentheses is the Lightweight Directory Access Protocol (LDAP) display name for the attribute. All values are for the domainDNS object that represents the domain. The acceptable values for this parameter are:

  • A distinguished name
  • A GUID (objectGUID)
  • A security identifier (objectSid)
  • A DNS domain name
  • A NetBIOS domain name

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to a domain object instance.

Type: ADDomain
Position: 0
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

Optional Parameters

-AuthType

Specifies the authentication method to use. The acceptable values for this parameter are:

  • Negotiate or 0
  • Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

Type: ADAuthType
Parameter Sets: Negotiate, Basic
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Confirm

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Aliases: cf
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Credential

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory module for Windows PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory module for Windows PowerShell returns a terminating error.

Type: PSCredential
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Server

Specifies the Active Directory Domain Services instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory snapshot instance.

Specify the Active Directory Domain Services instance in one of the following ways:

Domain name values:

  • Fully qualified domain name
  • NetBIOS name

Directory server values:

  • Fully qualified directory server name
  • NetBIOS name
  • Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

  • By using the Server value from objects passed through the pipeline
  • By using the server information associated with the Active Directory Domain Services Windows PowerShell provider drive, when the cmdlet runs in that drive
  • By using the domain of the computer running Windows PowerShell
Type: String
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Aliases: wi
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Inputs

Microsoft.ActiveDirectory.Management.ADDomain

A domain object is received by the Identity parameter.

Outputs

None or Microsoft.ActiveDirectory.Management.ADDomain

This cmdlet returns the modified domain object when the PassThru parameter is specified. By default, this cmdlet does not generate any output.

Notes

  • This cmdlet does not work with Active Directory Lightweight Directory Services (AD LDS).
  • This cmdlet does not work with an Active Directory snapshot.
  • This cmdlet does not work with a read-only domain controller.
  • This cmdlet does not work when connected to Global Catalog port.