Set-Ipam Address

Module:
ipamserver
Modifies an IP address in IPAM.

Syntax 

Set-IpamAddress
   [-IpAddress] <IPAddress[]>
   [[-ManagedByService] <String[]>]
   [[-ServiceInstance] <String[]>]
   [-NetworkType <VirtualizationType[]>]
   [-AddressSpace <String[]>]
   [-NewIPAddress <IPAddress>]
   [-NewManagedByService <String>]
   [-NewServiceInstance <String>]
   [-NewNetworkType <VirtualizationType>]
   [-NewAddressSpace <String>]
   [-DeviceType <String>]
   [-IpAddressState <String>]
   [-AssignmentType <AddressAssignment>]
   [-AssignmentDate <DateTime>]
   [-MacAddress <String>]
   [-ExpiryDate <DateTime>]
   [-Description <String>]
   [-Owner <String>]
   [-AssetTag <String>]
   [-SerialNumber <String>]
   [-ClientId <String>]
   [-Duid <String>]
   [-Iaid <UInt32>]
   [-ReservationServer <String>]
   [-ReservationName <String>]
   [-ReservationType <DhcpReservationType>]
   [-ReservationDescription <String>]
   [-DeviceName <String>]
   [-ForwardLookupZone <String>]
   [-ForwardLookupPrimaryServer <String>]
   [-ReverseLookupZone <String>]
   [-ReverseLookupPrimaryServer <String>]
   [-AddCustomConfiguration <String>]
   [-RemoveCustomConfiguration <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-IpamAddress
   -InputObject <CimInstance[]>
   [-NewIPAddress <IPAddress>]
   [-NewManagedByService <String>]
   [-NewServiceInstance <String>]
   [-NewNetworkType <VirtualizationType>]
   [-NewAddressSpace <String>]
   [-DeviceType <String>]
   [-IpAddressState <String>]
   [-AssignmentType <AddressAssignment>]
   [-AssignmentDate <DateTime>]
   [-MacAddress <String>]
   [-ExpiryDate <DateTime>]
   [-Description <String>]
   [-Owner <String>]
   [-AssetTag <String>]
   [-SerialNumber <String>]
   [-ClientId <String>]
   [-Duid <String>]
   [-Iaid <UInt32>]
   [-ReservationServer <String>]
   [-ReservationName <String>]
   [-ReservationType <DhcpReservationType>]
   [-ReservationDescription <String>]
   [-DeviceName <String>]
   [-ForwardLookupZone <String>]
   [-ForwardLookupPrimaryServer <String>]
   [-ReverseLookupZone <String>]
   [-ReverseLookupPrimaryServer <String>]
   [-AddCustomConfiguration <String>]
   [-RemoveCustomConfiguration <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-IpamAddress cmdlet modifies an IP address in IP Address Management (IPAM). Specify the IP addresses to modify or use the InputObject parameter to specify an IpamAddress object to modify.

You can use the cmdlet to associate the Dynamic Host Configuration Protocol (DHCP) reservation properties with the IP address. The cmdlet does not create a reservation on the DCHP server. You can use Windows PowerShell for DHCP Server to create a reservation on the DCHP server.

Examples

Example 1: Reassign an IP address 

PS C:\> Get-IpamAddress -IpAddress 172.16.10.10 | Set-IpamAddress -NewManagedByService "VMM" -NewServiceInstance "vmm1.contoso.com" -DeviceType "VM" -PassThru
IpAddress        : 172.16.10.10

NetworkType      : NonVirtualized

Duplicate        : False

ExpiryStatus     : Static

MacAddress       :

ManagedByService : VMM

ServiceInstance  : vmm1.contoso.com

DeviceName       :

DeviceType       : VM

IpAddressState   : In-Use

AssignmentType   : Static

This command gets an IpamAddress object that contains the IP address 172.16.10.10 that is managed by IPAM. The command passes the IpamAddress object to the Set-IpamAddress cmdlet by using the pipeline operator. The Set-IpamAddress cmdlet changes the service that manages the IP address to VMM, and changes the instance of the service that manages the IP address to vmm1.contoso.com. The command assigns the address to the virtual machine device type.

Example 2: Add custom metadata to an IP address 

PS C:\> Get-IpamAddress -IpAddress 172.16.10.10 | Set-IpamAddress -AddCustomConfiguration "ADSite=Main"

This command adds custom metadata to the IP address 172.16.10.10. The command adds the value Main to the custom field named ADSite.

Example 3: Convert the network type of an IP address from non-virtualized to provider 

PS C:\> Set-IpamAddress -IpAddress 172.16.10.10 -AddressSpace "Default" -NetworkType NonVirtualized -NewNetworkType Provider


IpAddress        : 172.16.10.10

NetworkType      : Provider

Duplicate        : False

ExpiryStatus     : Static

MacAddress       :

ManagedByService : VMM

ServiceInstance  : vmm1.contoso.com

DeviceName       :

DeviceType       : Host

IpAddressState   : In-Use

AssignmentType   : Static

This command converts the network type of the IP address 172.16.10.10 from non-virtualized to provider. The command assigns the provider address to the default provider address space.

Example 4: Convert the network type of an IP address from provider to non-virtualized 

PS C:\> Set-IpamAddress -IpAddress 172.16.10.10 -NetworkType Provider -NewNetworkType NonVirtualized -PassThru | Format-List IpAddress, NetworkType, ProviderAddressSpace, CustomerAddressSpace
IpAddress            : 172.16.10.10

NetworkType          : NonVirtualized

ProviderAddressSpace : Default

CustomerAddressSpace :

This command converts the network type of the IP address 172.16.10.10 from provider to non-virtualized. By default, the command assigns the non-virtualized address to the Default address space. The command passes the output to the Format-List cmdlet by using the pipeline operator, and formats the output as a table. For more information, type Get-Help Format-List .

Example 5: Assign an IP address to a new address space 

PS C:\> Set-IpamAddress -IpAddress 172.16.10.10 -NetworkType NonVirtualized -NewNetworkType Provider -NewAddressSpace MainDataCenter -PassThru | Format-List IpAddress, NetworkType, ProviderAddressSpace, CustomerAddressSpace
IpAddress            : 172.16.10.10

NetworkType          : Provider

ProviderAddressSpace : MainDataCenter

CustomerAddressSpace :

This command converts the network type of the IP address 172.16.10.10 from non-virtualized to provider. The command assigns the IP address to the provider address space named MainDataCenter. The command passes the output to the Format-List cmdlet by using the pipeline operator, and formats the output as a table.

Required Parameters

-InputObject

Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.

Type: CimInstance[]
Position: Named
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False
-IpAddress

Specifies an array of IP addresses.

Type: IPAddress[]
Position: 1
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

Optional Parameters

-AddCustomConfiguration

Specifies semi-colon (;) separated name and value pairs of custom metadata. The cmdlet adds the custom configuration metadata to the IP addresses.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-AddressSpace

Specifies the address space that is associated with the IP address. The default value is Default.

Type: String[]
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet.

For more information about Windows PowerShell background jobs, see about_Jobs .

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-AssetTag

Specifies the asset tag associated with the IP address.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-AssignmentDate

Specifies the date on which you assigned the IP address to a device.

Type: DateTime
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-AssignmentType

Specifies how IPAM assigns the addresses. The default value is Static.

The acceptable values for this parameter are:

  • Static
  • Dynamic
  • Auto
  • VIP
  • Reserved
Type: AddressAssignment
Parameter Sets: Static, Dynamic, Auto, VIP, Reserved
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type: CimSession[]
Aliases: Session
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-ClientId

Specifies the ID of the IPAM client.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-Confirm

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Aliases: cf
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Description

Specifies a description of the IP address assignment for a device.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-DeviceName

Specifies the name of the device to which you assigned the address.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-DeviceType

Specifies the type of device to which you assigned the address. Specify a value that exists in the built-in custom field DeviceType .

The acceptable values for this parameter are:

  • VM
  • Host

The default value is Host.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-Duid

Specifies the DHCP device unique identifier (DUID) for the client. Clients use the DUID to get an IP address from a DHCPv6 server.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ExpiryDate

Specifies an expiry date for the address. IPAM alerts the administrator when the IP address expires. IPAM does not reclaim expired addresses automatically.

Type: DateTime
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ForwardLookupPrimaryServer

Specifies the name of the Domain Name System (DNS) server that IPAM uses to resolve host names to IP addresses.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ForwardLookupZone

Specifies the name of the forward look up zone that contains mapping of host names to IP addresses.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-Iaid

Specifies the identity association ID (IAID) of an IPv6 address.

Type: UInt32
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-IpAddressState

Specifies the usage state of the IP address. By default, the cmdlet sets the address as In-Use.

You can specify a valid custom value for this parameter. Use the Add-IpamCustomValue cmdlet to add a custom value to a custom field in IPAM.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-MacAddress

Specifies the media access control (MAC) address of the device to which the address is assigned.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ManagedByService

Specifies the name of the service that manages the IP address. The value that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.

You can use the Add-IpamCustomValue cmdlet to add a value to the ManagedByService custom field in IPAM. You can use the Remove-IpamCustomValue cmdlet to remove a value from the ManagedByService custom field in IPAM.

Type: String[]
Aliases: MB
Position: 2
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-NetworkType

Specifies the network type of the address.

The acceptable values for this parameter are:

  • Provider
  • Customer
  • NonVirtualized

The default value is NonVirtualized.If you specify Default for the AddressSpace parameter, the valid values for this parameter are Provider and NonVirtualized. If you specify a provider type of address space for the AddressSpace parameter, you must specify Provider for this parameter. If you specify a customer type of address space for the AddressSpace parameter, you must specify Customer for this parameter.

Type: VirtualizationType[]
Parameter Sets: NonVirtualized, Provider, Customer
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-NewAddressSpace

Specifies the name of the new address space for the IP addresses.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-NewIPAddress

Specifies an IP address. The cmdlet assigns the new IP address to the IP addresses.

Type: IPAddress
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-NewManagedByService

Specifies a new value for the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the ManagedByService custom field in IPAM.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-NewNetworkType

Specifies a new value for network type for the IP addresses. You can change the network type from NonVirtualized to Provider, and from Provider to NonVirtualized. You cannot be change the network type from NonVirtualized or Provider to Customer.

Type: VirtualizationType
Parameter Sets: NonVirtualized, Provider
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-NewServiceInstance

Specifies a new value for the instance of the service that manages the IP addresses. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance custom field in IPAM.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-Owner

Specifies the name of the owner of the IP addresses.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-RemoveCustomConfiguration

Specifies a semi-colon (;) separated string of custom field names. The cmdlet removes the custom field names from the IP addresses.

Type: String
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-ReservationDescription

Specifies a description for the DCHP reservation.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ReservationName

Specifies the name of the reservation on the DHCP server for the device. You must specify a value for this parameter if you specify the ReservationServer parameter.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ReservationServer

Specifies the DHCP server on which the reservation is assigned. The cmdlet stores the reservation data in IPAM. The cmdlet does not create a reservation on the DHCP server.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ReservationType

Specifies the protocols supported by the reservation. You must specify a value for this parameter if you specify the ReservationServer parameter.

The acceptable values for this parameter are:

  • DHCP
  • BootPr
  • DHCP and BootPr
Type: DhcpReservationType
Parameter Sets: None, Dhcp, Bootp, Both
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ReverseLookupPrimaryServer

Specifies the DNS server that IPAM uses to resolve IP addresses to host names.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ReverseLookupZone

Specifies the reverse lookup zone that contains mapping from IP addresses to fully qualified domain names (FQDN).

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-SerialNumber

Specifies the serial number of the device to which you assigned the address.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ServiceInstance

Specifies an array of instances of the services that manage the IP addresses. Specify the instances of the services that you specified for the ManagedByService parameter. If you specify this parameter, you must specify the IpAddress parameter. The value that you specify for this parameter must exist in the set of values that you defined for the ServiceInstance parameter.

Type: String[]
Aliases: SI
Position: 3
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type: Int32
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Aliases: wi
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Outputs

IpamAddress

This cmdlet returns an object that represents an IP Address on the IPAM server.