New-Smb
Share
Syntax
New-SmbShare
[-Temporary]
[-ContinuouslyAvailable <Boolean>]
[-Description <String>]
[-ConcurrentUserLimit <UInt32>]
[-CATimeout <UInt32>]
[-FolderEnumerationMode <FolderEnumerationMode>]
[-CachingMode <CachingMode>]
[-FullAccess <String[]>]
[-ChangeAccess <String[]>]
[-ReadAccess <String[]>]
[-NoAccess <String[]>]
[-SecurityDescriptor <String>]
[-Path] <String>
[-Name] <String>
[[-ScopeName] <String>]
[-EncryptData <Boolean>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The New-SmbShare cmdlet exposes a file system folder to remote clients as a Server Message Block (SMB) share.
To delete a share that was created by this cmdlet, use the Remove-SmbShare cmdlet.
Examples
Example 1: Create an SMB share
PS C:\>New-SmbShare -Name "VMSFiles" -Path "C:\ClusterStorage\Volume1\VMFiles" -FullAccess "Contoso\Administrator", "Contoso\Contoso-HV1$"
Name ScopeName Path Description
---- --------- ---- -----------
VMSFiles Contoso-SO C:\ClusterStorage\Volume1\...
This command creates an SMB share.
Example 2: Create an encrypted SMB share
PS C:\>New-SmbShare -Name "Data" -Path "J:\Data" -EncryptData $True
Name ScopeName Path Description
---- --------- ---- -----------
Data Contoso-FS J:\Data
This command creates an encrypted SMB share.
Required Parameters
Specifies a name for the SMB share.
The name may be composed of any valid file name characters, but must be less than 80 characters long.
The names
pipe
and
mailslot
are reserved for use by the computer.
Type: | String |
Position: | 1 |
Default value: | None |
Accept pipeline input: | True (ByPropertyName) |
Accept wildcard characters: | False |
Specifies the path of the location of the folder to share. The path must be fully qualified. Relative paths or paths that contain wildcard characters are not permitted.
Type: | String |
Position: | 2 |
Default value: | None |
Accept pipeline input: | True (ByPropertyName) |
Accept wildcard characters: | False |
Optional Parameters
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies the continuous availability time-out for the share.
Type: | UInt32 |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies the caching mode of the offline files for the SMB share. There are five caching modes:
- None. Prevents users from storing documents and programs offline.
- Manual. Allows users to identify the documents and programs they want to store offline.
- Programs. Automatically stores documents and programs offline.
- Documents. Automatically stores documents offline.
- BranchCache. Enables BranchCache and manual caching of documents on the shared folder.
Type: | CachingMode |
Parameter Sets: | None, Manual, Documents, Programs, BranchCache, Unknown |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies which users are granted modify permission to access the share. Multiple users can be specified by using a comma-separated list.
Type: | String[] |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Aliases: | Session |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies the maximum number of concurrently connected users that the new SMB share may accommodate. If this parameter is set to zero (0), then the number of users is unlimited. The default value is zero (0).
Type: | UInt32 |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Prompts you for confirmation before running the cmdlet.
Type: | SwitchParameter |
Aliases: | cf |
Position: | Named |
Default value: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Indicates that the share is continuously available.
Type: | Boolean |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies an optional description of the SMB share. A description of the share is displayed by running the Get-SmbShare cmdlet. The description may not contain more than 256 characters. The default value no description, or an empty description.
Type: | String |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Indicates that the share is encrypted.
Type: | Boolean |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies which files and folders in the SMB share are visible to users. The acceptable values for this parameter are:
- AccessBased. SMB does not the display the files and folders for a share to a user unless that user has rights to access the files and folders. By default, access-based enumeration is disabled for new SMB shares.
- Unrestricted. SMB displays files and folders to a user even when the user does not have permission to access the items.
The default value is Unrestricted.
Type: | FolderEnumerationMode |
Parameter Sets: | AccessBased, Unrestricted |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies which accounts are granted full permission to access the share. Use a comma-separated list to specify multiple accounts. An account may not be specified more than once in the FullAccess , ChangeAccess , or ReadAccess parameter lists, but may be specified once in the FullAccess , ChangeAccess , or ReadAccess parameter list and once in the NoAccess parameter list.
Type: | String[] |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies which accounts are denied access to the SMB share. Multiple accounts can be specified by supplying a comma-separated list.
Type: | String[] |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies which users are granted read permission to access the share. Multiple users can be specified by supplying a comma-separated list.
Type: | String[] |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies the scope name of the share.
Type: | String |
Position: | 3 |
Default value: | None |
Accept pipeline input: | True (ByPropertyName) |
Accept wildcard characters: | False |
Specifies the security descriptor for the SMB share in string format.
Type: | String |
Position: | Named |
Default value: | None |
Accept pipeline input: | True (ByPropertyName) |
Accept wildcard characters: | False |
Specifies the lifetime of the new SMB share. A temporary share does not persist beyond the next restart of the computer. By default, new SMB shares are persistent, and non-temporary.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of
0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: | SwitchParameter |
Aliases: | wi |
Position: | Named |
Default value: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
None
Outputs
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/SMB/MSFT_SmbShare
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (
#
) provides the namespace and class name for the underlying WMI object.
This cmdlet returns a
MSFT_SmbShare
object that represents the SMB share.