Get-Target
Syntax
Get-TargetPort
[[-FriendlyName] <String[]>]
[-ConnectionType <ConnectionType[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]Get-TargetPort
[-UniqueId <String[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]Get-TargetPort
[-PortAddress <String[]>]
[-ConnectionType <ConnectionType[]>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]Get-TargetPort
[-StorageSubSystem <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]Get-TargetPort
[-MaskingSet <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]Get-TargetPort
[-TargetPortal <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]Get-TargetPort
[-VirtualDisk <CimInstance>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[<CommonParameters>]Description
The Get-TargetPort cmdlet returns a TargetPort object associated with a specific port address and connection type.
Examples
EXAMPLE 1
PS C:\> $StorageSubsystem = Get-StorageSubsystem
PS C:\> Get-Targetport -StorageSubsystem $StorageSubsystemThis example returns a list of target ports on the specified storage subsystem.
Optional Parameters
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Specifies the type of the connection. The acceptable values for this parameter are:iSCSI, SAS, Fibre Channel, and so on.
| Type: | ConnectionType[] |
| Parameter Sets: | Other, FibreChannel, ParallelSCSI, SSA, IEEE1394, RDMA, iSCSI, SAS, ADT |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Specifies a friendly name for a disk. The friendly name may be defined by a user and is not guaranteed to be unique.
| Type: | String[] |
| Position: | 0 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Accepts a MaskingSet object as input. The Masking Set CIM object is exposed by the Get-MaskingSet cmdlet.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByValue) |
| Accept wildcard characters: | False |
Specifies a string containing the port address to query.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Accepts a StorageSubsystem object as input. The Storage Subsystem CIM object is exposed by the Get-StorageSubsystem cmdlet.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByValue) |
| Accept wildcard characters: | False |
Accepts a TargetPortal object as input. The Target Portal CIM object is exposed by the Get-TargetPortal cmdlet.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByValue) |
| Accept wildcard characters: | False |
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of
0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Specifies an ID used to uniquely identify a Disk object in the system. The ID persists through restarts.
| Type: | String[] |
| Aliases: | Id |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Accepts a VirtualDisk object as input. The Virtual Disk CIM object is exposed by the Get-VirtualDisk cmdlet.
| Type: | CimInstance |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByValue) |
| Accept wildcard characters: | False |
Inputs
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_MaskingSet
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (
#
) provides the namespace and class name for the underlying WMI object.
Inputs
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_StorageSubsystem
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (
#
) provides the namespace and class name for the underlying WMI object.
Inputs
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_TargetPortal
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (
#
) provides the namespace and class name for the underlying WMI object.
Inputs
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_VirtualDisk
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (
#
) provides the namespace and class name for the underlying WMI object.
Outputs
Microsoft.Management.Infrastructure.CimInstance#ROOT/Microsoft/Windows/Storage/MSFT_TargetPort
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (
#
) provides the namespace and class name for the underlying WMI object.