Set-Wds Install Image

Module:
wds
Modifies the properties of an install image.

Syntax 

Set-WdsInstallImage
   [-NewImageName <String>]
   [-NewDescription <String>]
   [-DisplayOrder <UInt32>]
   [-UserFilter <String>]
   [-UnattendFile <String>]
   [-OverwriteUnattend]
   [-ImageGroup <String>]
   [-FileName <String>]
   -ImageName <String>
   [-StopMulticastTransmission]
   [-Force]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]
Set-WdsInstallImage
   [-NewImageName <String>]
   [-NewDescription <String>]
   [-DisplayOrder <UInt32>]
   [-UserFilter <String>]
   [-UnattendFile <String>]
   [-OverwriteUnattend]
   [-ImageGroup <String>]
   [-FileName <String>]
   -ImageName <String>
   [-StartScheduledCast]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]
Set-WdsInstallImage
   [-NewImageName <String>]
   [-NewDescription <String>]
   [-DisplayOrder <UInt32>]
   [-UserFilter <String>]
   [-UnattendFile <String>]
   [-OverwriteUnattend]
   [-ImageGroup <String>]
   [-FileName <String>]
   -ImageName <String>
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]
Set-WdsInstallImage
   [-NewImageName <String>]
   [-NewDescription <String>]
   [-DisplayOrder <UInt32>]
   [-UserFilter <String>]
   [-UnattendFile <String>]
   [-OverwriteUnattend]
   [-ImageGroup <String>]
   [-FileName <String>]
   -ImageName <String>
   [-Multicast]
   [-TransmissionName <String>]
   [-ManualStart]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]
Set-WdsInstallImage
   [-NewImageName <String>]
   [-NewDescription <String>]
   [-DisplayOrder <UInt32>]
   [-UserFilter <String>]
   [-UnattendFile <String>]
   [-OverwriteUnattend]
   [-ImageGroup <String>]
   [-FileName <String>]
   [-ClientCount <UInt32>]
   [-StartTime <DateTime>]
   -ImageName <String>
   [-Multicast]
   [-TransmissionName <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [<CommonParameters>]

Description

The Set-WdsInstallImage cmdlet modifies the properties of an install image in the Windows Deployment Services image store. Use this cmdlet to do any of the following:

  • Change the name of an install image.
  • Change the description of an install image.
  • Set the display order of an install image in the image menu.
  • Specify an answer file for unattended setup of an install image.
  • Set permissions for users or groups to access the image.

When you work with multicast transmissions that use an install image as content, you can:

  • Create and name an AutoCast transmission.
  • Create and name a ScheduledCast transmission which starts when a preset number of clients are ready to start, at a specific time, or both.
  • Create a manually started ScheduledCast transmission.
  • Start a ScheduledCast transmission.
  • Stop a multicast transmission in progress, and then either disconnect clients immediately, or allow for them to finish, but not allow for any new clients to join.

An AutoCast transmission is a multicast transmission. When a client requests an install image, the multicast transmission starts. Clients that request the same image are joined to the multicast transmission.

A ScheduledCast transmission is a multicast transmission. When a specified number of clients request an image, or a specified time of day is reached, the multicast transmission starts. If you do not specify either of these conditions, you must manually start the transmission.

Specify the install image by using the image name and image group name. If the image name and image group name do not uniquely identify the install image, specify the file name.

Examples

Example 1: Modify an install image 

PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -DisplayOrder 0 -NewImageName "Fabrikam Latest with LOB v2.0 apps" -UnattendFile "D:\images\unattend\FabrikamwLOB.xml" -OverwriteUnattend -UserFilter "O:BAG:DUD:(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)(A;OICI;0x1200a9;;;AU)(A;OICI;FA;;;S-1-5-80-1688844526-3235337491-1375791646-891369040-3692469510)"

This command modifies an install image for automatic installation.

Example 2: Modify an install image for multicast transmission 

PS C:\>Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -TransmissionName "Fabrikam Latest AutoCast"

This command modifies an install image for multicast transmission.

Example 3: Modify start time and client count conditions for an install image 

PS C:\>Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -ClientCount 50 -StartTime 2014/12/01:11:00 -TransmissionName "Fabrikam Latest ScheduledCast with automatic start"

This command modifies an install image by using the ClientCount and StartTime parameters.

Example 4: Modify an install image for manual start 

PS C:\>Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -ManualStart -TransmissionName "Fabrikam Latest ScheduledCast with manual start"

This command modifies an install image by using the ManualStart parameter.

Example 5: Modify an install image to start 

PS C:\>Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -StartScheduledCast

This command modifies an install image to begin a scheduled transmission.

Example 6: Modify an install image to stop a transmission 

PS C:\>Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -StopMulticastTransmission

This command stops a multicast transmission for an install image.

Required Parameters

-ImageName

Specifies the name of an image. This is the name of the image to modify.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-ManualStart

Indicates that the transmission uses a manual start. If you also specify the MulticastTransmission parameter, the cmdlet creates a ScheduledCast transmission that does not begin until a StartScheduledCast command is given.

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Multicast

Indicates that the cmdlet enables an AutoCast transmission on the image. If you do not specify a name by using the TransmissionName parameter, the multicast transmission uses the image name

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-StartScheduledCast

Indicates that the cmdlet enables and starts a ScheduledCast transmission on the image. If there are no clients connected to the transmission, the transmission does not start.

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-StopMulticastTransmission

Indicates that Windows Deployment Services stop the multicast transmission of the image. If you specify the Force parameter, the cmdlet disconnects any clients connected to the multicast transmission. If you do not specify the Force parameter, and the transmission is autocast, current clients finish receiving the content, but no additional clients can join the transmission.

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Optional Parameters

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete. The cmdlet immediately returns an object that represents the job and then displays the command prompt. You can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get the job results, use the Receive-Job cmdlet. For more information about Windows PowerShell® background jobs, see about_Jobs .

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type: CimSession[]
Aliases: Session
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-ClientCount

Specifies the number of clients that must connect to a transmission. If you also specify the MulticastTransmission parameter, the client count specifies the number of clients that must connect to the ScheduledCast transmission for it to begin. Use the StartScheduledCast parameter to begin a transmission before reaching the client count. If you specify the ClientCount parameter and the StartTime parameter, the transmission starts when either a sufficient number of clients have connected or at the time specified by the StartTime parameter.

You may not specify this parameter together with the ManualStart parameter.

Type: UInt32
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-DisplayOrder

Specifies the order in which images appear in the boot menu on Pre-Boot Execution Environment (PXE) clients. The menu lists the boot images in ascending order, smallest number to largest number.

Type: UInt32
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-FileName

Specifies a file name. This is the file name of the install image. Use this parameter to specify the file name for the install image if the install image name does not uniquely identify the image.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-Force

Indicates that the cmdlet disconnects any clients currently connected to the multicast transmission. If you do not specify this parameter for an AutoCast transmission, existing clients finish receiving the content, but no new clients join.

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-ImageGroup

Specifies the name of an image group. This image group contains the image to modify. If you do not specify an image group, and only one image group exists on the server, the cmdlet uses that image group by default. If more than one image group exists on the server, you must specify the image group.

Type: String
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-NewDescription

Specifies a new description for the install image to create in the set operation.

Type: String
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-NewImageName

Specifies a new name for the image file to create in the set operation.

Type: String
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-OverwriteUnattend

Indicates that the cmdlet can overwrite an existing answer file. If you specify the UnattendFile parameter, the cmdlet overwrites an existing answer file associated with the image.

Type: SwitchParameter
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-StartTime

Specifies a day and time, in MM/DD/YYYY.hh:mm:ss format, that denotes the start time. If you specify the MulticastTransmission parameter, this parameter denotes the time the ScheduledCast transmission starts. The StartScheduledCast command can start a transmission before reaching the client count. If you specify both the StartTime parameter and the ClientCount parameter, the transmission starts when either a sufficient number of clients connect, or the time specified in this parameter is reached. Do not specify this parameter together with the ManualStart parameter.

Type: DateTime
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type: Int32
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-TransmissionName

Specifies a name for the multicast transmission.

Type: String
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-UnattendFile

Specifies the full path for the answer file associated with the image.

Type: String
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-UserFilter

Specifies the access controls on the image, in Security Descriptor Definition Language (SDDL) format. To restrict access to the file resources, and access to all images in an image group, set access controls on the image group itself.

Type: String
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Outputs

Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsInstallImage