Qt Documentation

  • Qt 5.12
  • Creating Bootable SD Card

Building U-Boot Image Preparing U-Boot

Creating Bootable SD Card

With a bootable micro SD card your i.MX6 Quad board can run the INTEGRITY monolith application on the board. To create the bootable SD card:

  1. Format the SD card with a FAT32 filesystem.
  2. Save the demo.image file (built with mkimage in Building U-Boot Image) and the device tree blob file imx6q-sabrelite.dtb for the i.MX6 Quad board under your SD card root.

    Note: You will find the device tree blob file in your INTEGRITY installation, under the path /usr/ghs/int1144/platform-cortex-a9/imx6-sabrelite/imx6q-sabrelite.dtb.

  3. Set the SD card into your i.MX6 Quad board.

Building U-Boot Image Preparing U-Boot

© 2019 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.