mainwidget.cpp Example File

piechartcustomization/mainwidget.cpp
/**************************************************************************** ** ** Copyright (C) 2016 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the Qt Charts module of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:GPL$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3 or (at your option) any later version ** approved by the KDE Free Qt Foundation. The licenses are as published by ** the Free Software Foundation and appearing in the file LICENSE.GPL3 ** included in the packaging of this file. Please review the following ** information to ensure the GNU General Public License requirements will ** be met: https://www.gnu.org/licenses/gpl-3.0.html. ** ** $QT_END_LICENSE$ ** ****************************************************************************/
#include "mainwidget.h" #include "customslice.h" #include "pentool.h" #include "brushtool.h" #include <QtWidgets/QPushButton> #include <QtWidgets/QComboBox> #include <QtWidgets/QCheckBox> #include <QtWidgets/QLineEdit> #include <QtWidgets/QGroupBox> #include <QtWidgets/QDoubleSpinBox> #include <QtWidgets/QFormLayout> #include <QtWidgets/QFontDialog> #include <QtCharts/QChartView> #include <QtCharts/QPieSeries> QT_CHARTS_USE_NAMESPACE MainWidget::MainWidget(QWidget *parent) : QWidget(parent), m_slice(0) { // create chart QChart *chart = new QChart; chart->setTitle("Piechart customization"); chart->setAnimationOptions(QChart::AllAnimations); // create series m_series = new QPieSeries(); *m_series << new CustomSlice("Slice 1", 10.0); *m_series << new CustomSlice("Slice 2", 20.0); *m_series << new CustomSlice("Slice 3", 30.0); *m_series << new CustomSlice("Slice 4", 40.0); *m_series << new CustomSlice("Slice 5", 50.0); m_series->setLabelsVisible(); chart->addSeries(m_series); connect(m_series, &QPieSeries::clicked, this, &MainWidget::handleSliceClicked); // chart settings m_themeComboBox = new QComboBox(); m_themeComboBox->addItem("Light", QChart::ChartThemeLight); m_themeComboBox->addItem("BlueCerulean", QChart::ChartThemeBlueCerulean); m_themeComboBox->addItem("Dark", QChart::ChartThemeDark); m_themeComboBox->addItem("BrownSand", QChart::ChartThemeBrownSand); m_themeComboBox->addItem("BlueNcs", QChart::ChartThemeBlueNcs); m_themeComboBox->addItem("High Contrast", QChart::ChartThemeHighContrast); m_themeComboBox->addItem("Blue Icy", QChart::ChartThemeBlueIcy); m_themeComboBox->addItem("Qt", QChart::ChartThemeQt); m_aaCheckBox = new QCheckBox(); m_animationsCheckBox = new QCheckBox(); m_animationsCheckBox->setCheckState(Qt::Checked); m_legendCheckBox = new QCheckBox(); QFormLayout *chartSettingsLayout = new QFormLayout(); chartSettingsLayout->addRow("Theme", m_themeComboBox); chartSettingsLayout->addRow("Antialiasing", m_aaCheckBox); chartSettingsLayout->addRow("Animations", m_animationsCheckBox); chartSettingsLayout->addRow("Legend", m_legendCheckBox); QGroupBox *chartSettings = new QGroupBox("Chart"); chartSettings->setLayout(chartSettingsLayout); connect(m_themeComboBox, static_cast<void (QComboBox::*)(int)>(&QComboBox::currentIndexChanged), this, &MainWidget::updateChartSettings); connect(m_aaCheckBox, &QCheckBox::toggled, this, &MainWidget::updateChartSettings); connect(m_animationsCheckBox, &QCheckBox::toggled, this, &MainWidget::updateChartSettings); connect(m_legendCheckBox, &QCheckBox::toggled, this, &MainWidget::updateChartSettings); // series settings m_hPosition = new QDoubleSpinBox(); m_hPosition->setMinimum(0.0); m_hPosition->setMaximum(1.0); m_hPosition->setSingleStep(0.1); m_hPosition->setValue(m_series->horizontalPosition()); m_vPosition = new QDoubleSpinBox(); m_vPosition->setMinimum(0.0); m_vPosition->setMaximum(1.0); m_vPosition->setSingleStep(0.1); m_vPosition->setValue(m_series->verticalPosition()); m_sizeFactor = new QDoubleSpinBox(); m_sizeFactor->setMinimum(0.0); m_sizeFactor->setMaximum(1.0); m_sizeFactor->setSingleStep(0.1); m_sizeFactor->setValue(m_series->pieSize()); m_startAngle = new QDoubleSpinBox(); m_startAngle->setMinimum(-720); m_startAngle->setMaximum(720); m_startAngle->setValue(m_series->pieStartAngle()); m_startAngle->setSingleStep(1); m_endAngle = new QDoubleSpinBox(); m_endAngle->setMinimum(-720); m_endAngle->setMaximum(720); m_endAngle->setValue(m_series->pieEndAngle()); m_endAngle->setSingleStep(1); m_holeSize = new QDoubleSpinBox(); m_holeSize->setMinimum(0.0); m_holeSize->setMaximum(1.0); m_holeSize->setSingleStep(0.1); m_holeSize->setValue(m_series->holeSize()); QPushButton *appendSlice = new QPushButton("Append slice"); QPushButton *insertSlice = new QPushButton("Insert slice"); QPushButton *removeSlice = new QPushButton("Remove selected slice"); QFormLayout *seriesSettingsLayout = new QFormLayout(); seriesSettingsLayout->addRow("Horizontal position", m_hPosition); seriesSettingsLayout->addRow("Vertical position", m_vPosition); seriesSettingsLayout->addRow("Size factor", m_sizeFactor); seriesSettingsLayout->addRow("Start angle", m_startAngle); seriesSettingsLayout->addRow("End angle", m_endAngle); seriesSettingsLayout->addRow("Hole size", m_holeSize); seriesSettingsLayout->addRow(appendSlice); seriesSettingsLayout->addRow(insertSlice); seriesSettingsLayout->addRow(removeSlice); QGroupBox *seriesSettings = new QGroupBox("Series"); seriesSettings->setLayout(seriesSettingsLayout); connect(m_vPosition, static_cast<void (QDoubleSpinBox::*)(double)>(&QDoubleSpinBox::valueChanged), this, &MainWidget::updateSerieSettings); connect(m_hPosition, static_cast<void (QDoubleSpinBox::*)(double)>(&QDoubleSpinBox::valueChanged), this, &MainWidget::updateSerieSettings); connect(m_sizeFactor, static_cast<void (QDoubleSpinBox::*)(double)>(&QDoubleSpinBox::valueChanged), this, &MainWidget::updateSerieSettings); connect(m_startAngle, static_cast<void (QDoubleSpinBox::*)(double)>(&QDoubleSpinBox::valueChanged), this, &MainWidget::updateSerieSettings); connect(m_endAngle, static_cast<void (QDoubleSpinBox::*)(double)>(&QDoubleSpinBox::valueChanged), this, &MainWidget::updateSerieSettings); connect(m_holeSize, static_cast<void (QDoubleSpinBox::*)(double)>(&QDoubleSpinBox::valueChanged), this, &MainWidget::updateSerieSettings); connect(appendSlice, &QPushButton::clicked, this, &MainWidget::appendSlice); connect(insertSlice, &QPushButton::clicked, this, &MainWidget::insertSlice); connect(removeSlice, &QPushButton::clicked, this, &MainWidget::removeSlice); // slice settings m_sliceName = new QLineEdit("<click a slice>"); m_sliceName->setSizePolicy(QSizePolicy::Maximum, QSizePolicy::Maximum); m_sliceValue = new QDoubleSpinBox(); m_sliceValue->setMaximum(1000); m_sliceLabelVisible = new QCheckBox(); m_sliceLabelArmFactor = new QDoubleSpinBox(); m_sliceLabelArmFactor->setSingleStep(0.01); m_sliceExploded = new QCheckBox(); m_sliceExplodedFactor = new QDoubleSpinBox(); m_sliceExplodedFactor->setSingleStep(0.01); m_pen = new QPushButton(); m_penTool = new PenTool("Slice pen", this); m_brush = new QPushButton(); m_brushTool = new BrushTool("Slice brush", this); m_font = new QPushButton(); m_labelBrush = new QPushButton(); m_labelBrushTool = new BrushTool("Label brush", this); m_labelPosition = new QComboBox(this); m_labelPosition->addItem("Outside", QPieSlice::LabelOutside); m_labelPosition->addItem("Inside horizontal", QPieSlice::LabelInsideHorizontal); m_labelPosition->addItem("Inside tangential", QPieSlice::LabelInsideTangential); m_labelPosition->addItem("Inside normal", QPieSlice::LabelInsideNormal); QFormLayout *sliceSettingsLayout = new QFormLayout(); sliceSettingsLayout->addRow("Label", m_sliceName); sliceSettingsLayout->addRow("Value", m_sliceValue); sliceSettingsLayout->addRow("Pen", m_pen); sliceSettingsLayout->addRow("Brush", m_brush); sliceSettingsLayout->addRow("Label visible", m_sliceLabelVisible); sliceSettingsLayout->addRow("Label font", m_font); sliceSettingsLayout->addRow("Label brush", m_labelBrush); sliceSettingsLayout->addRow("Label position", m_labelPosition); sliceSettingsLayout->addRow("Label arm length", m_sliceLabelArmFactor); sliceSettingsLayout->addRow("Exploded", m_sliceExploded); sliceSettingsLayout->addRow("Explode distance", m_sliceExplodedFactor); QGroupBox *sliceSettings = new QGroupBox("Selected slice"); sliceSettings->setLayout(sliceSettingsLayout); connect(m_sliceName, &QLineEdit::textChanged, this, &MainWidget::updateSliceSettings); connect(m_sliceValue, static_cast<void (QDoubleSpinBox::*)(double)>(&QDoubleSpinBox::valueChanged), this, &MainWidget::updateSliceSettings); connect(m_pen, &QPushButton::clicked, m_penTool, &PenTool::show); connect(m_penTool, &PenTool::changed, this, &MainWidget::updateSliceSettings); connect(m_brush, &QPushButton::clicked, m_brushTool, &BrushTool::show); connect(m_brushTool, &BrushTool::changed, this, &MainWidget::updateSliceSettings); connect(m_font, &QPushButton::clicked, this, &MainWidget::showFontDialog); connect(m_labelBrush, &QPushButton::clicked, m_labelBrushTool, &BrushTool::show); connect(m_labelBrushTool, &BrushTool::changed, this, &MainWidget::updateSliceSettings); connect(m_sliceLabelVisible, &QCheckBox::toggled, this, &MainWidget::updateSliceSettings); connect(m_sliceLabelVisible, &QCheckBox::toggled, this, &MainWidget::updateSliceSettings); connect(m_sliceLabelArmFactor, static_cast<void (QDoubleSpinBox::*)(double)>(&QDoubleSpinBox::valueChanged), this, &MainWidget::updateSliceSettings); connect(m_sliceExploded, &QCheckBox::toggled, this, &MainWidget::updateSliceSettings); connect(m_sliceExplodedFactor, static_cast<void (QDoubleSpinBox::*)(double)>(&QDoubleSpinBox::valueChanged), this, &MainWidget::updateSliceSettings); connect(m_labelPosition, static_cast<void (QComboBox::*)(int)>(&QComboBox::currentIndexChanged), this, &MainWidget::updateSliceSettings); // create chart view m_chartView = new QChartView(chart); // create main layout QVBoxLayout *settingsLayout = new QVBoxLayout(); settingsLayout->addWidget(chartSettings); settingsLayout->addWidget(seriesSettings); settingsLayout->addWidget(sliceSettings); settingsLayout->addStretch(); QGridLayout *baseLayout = new QGridLayout(); baseLayout->addLayout(settingsLayout, 0, 0); baseLayout->addWidget(m_chartView, 0, 1); setLayout(baseLayout); updateSerieSettings(); updateChartSettings(); } void MainWidget::updateChartSettings() { QChart::ChartTheme theme = static_cast<QChart::ChartTheme>(m_themeComboBox->itemData( m_themeComboBox->currentIndex()).toInt()); m_chartView->chart()->setTheme(theme); m_chartView->setRenderHint(QPainter::Antialiasing, m_aaCheckBox->isChecked()); if (m_animationsCheckBox->checkState() == Qt::Checked) m_chartView->chart()->setAnimationOptions(QChart::AllAnimations); else m_chartView->chart()->setAnimationOptions(QChart::NoAnimation); if (m_legendCheckBox->checkState() == Qt::Checked) m_chartView->chart()->legend()->show(); else m_chartView->chart()->legend()->hide(); } void MainWidget::updateSerieSettings() { m_series->setHorizontalPosition(m_hPosition->value()); m_series->setVerticalPosition(m_vPosition->value()); m_series->setPieSize(m_sizeFactor->value()); m_holeSize->setMaximum(m_sizeFactor->value()); m_series->setPieStartAngle(m_startAngle->value()); m_series->setPieEndAngle(m_endAngle->value()); m_series->setHoleSize(m_holeSize->value()); } void MainWidget::updateSliceSettings() { if (!m_slice) return; m_slice->setLabel(m_sliceName->text()); m_slice->setValue(m_sliceValue->value()); m_slice->setPen(m_penTool->pen()); m_slice->setBrush(m_brushTool->brush()); m_slice->setLabelBrush(m_labelBrushTool->brush()); m_slice->setLabelVisible(m_sliceLabelVisible->isChecked()); m_slice->setLabelArmLengthFactor(m_sliceLabelArmFactor->value()); // We assume that label position index is in sync with the enum m_slice->setLabelPosition((QPieSlice::LabelPosition)m_labelPosition->currentIndex()); m_slice->setExploded(m_sliceExploded->isChecked()); m_slice->setExplodeDistanceFactor(m_sliceExplodedFactor->value()); } void MainWidget::handleSliceClicked(QPieSlice *slice) { m_slice = static_cast<CustomSlice *>(slice); // name m_sliceName->blockSignals(true); m_sliceName->setText(slice->label()); m_sliceName->blockSignals(false); // value m_sliceValue->blockSignals(true); m_sliceValue->setValue(slice->value()); m_sliceValue->blockSignals(false); // pen m_pen->setText(PenTool::name(m_slice->pen())); m_penTool->setPen(m_slice->pen()); // brush m_brush->setText(m_slice->originalBrush().color().name()); m_brushTool->setBrush(m_slice->originalBrush()); // label m_labelBrush->setText(BrushTool::name(m_slice->labelBrush())); m_labelBrushTool->setBrush(m_slice->labelBrush()); m_font->setText(slice->labelFont().toString()); m_sliceLabelVisible->blockSignals(true); m_sliceLabelVisible->setChecked(slice->isLabelVisible()); m_sliceLabelVisible->blockSignals(false); m_sliceLabelArmFactor->blockSignals(true); m_sliceLabelArmFactor->setValue(slice->labelArmLengthFactor()); m_sliceLabelArmFactor->blockSignals(false); m_labelPosition->blockSignals(true); // We assume that label position index is in sync with the enum m_labelPosition->setCurrentIndex(slice->labelPosition()); m_labelPosition->blockSignals(false); // exploded m_sliceExploded->blockSignals(true); m_sliceExploded->setChecked(slice->isExploded()); m_sliceExploded->blockSignals(false); m_sliceExplodedFactor->blockSignals(true); m_sliceExplodedFactor->setValue(slice->explodeDistanceFactor()); m_sliceExplodedFactor->blockSignals(false); } void MainWidget::showFontDialog() { if (!m_slice) return; QFontDialog dialog(m_slice->labelFont()); dialog.show(); dialog.exec(); m_slice->setLabelFont(dialog.currentFont()); m_font->setText(dialog.currentFont().toString()); } void MainWidget::appendSlice() { *m_series << new CustomSlice("Slice " + QString::number(m_series->count() + 1), 10.0); } void MainWidget::insertSlice() { if (!m_slice) return; int i = m_series->slices().indexOf(m_slice); m_series->insert(i, new CustomSlice("Slice " + QString::number(m_series->count() + 1), 10.0)); } void MainWidget::removeSlice() { if (!m_slice) return; m_sliceName->setText("<click a slice>"); m_series->remove(m_slice); m_slice = 0; } #include "moc_mainwidget.cpp"

© 2019 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.