gallery.qml Example File
gallery/qml/gallery.qml/**************************************************************************** ** ** Copyright (C) 2016 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the examples of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:BSD$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** BSD License Usage ** Alternatively, you may use this file under the terms of the BSD license ** as follows: ** ** "Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions are ** met: ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in ** the documentation and/or other materials provided with the ** distribution. ** * Neither the name of The Qt Company Ltd nor the names of its ** contributors may be used to endorse or promote products derived ** from this software without specific prior written permission. ** ** ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." ** ** $QT_END_LICENSE$ ** ****************************************************************************/import QtQuick 2.2 import QtGraphicalEffects 1.0 import QtQuick.Controls 1.4 import QtQuick.Controls.Styles 1.4 import QtQuick.Dialogs 1.0 import QtQuick.Extras 1.4 import QtQuick.Layouts 1.0 import QtQuick.Window 2.1 Window { id: root objectName: "window" visible: true width: 480 height: 800 color: "#161616" title: "Qt Quick Extras Demo" function toPixels(percentage) { return percentage * Math.min(root.width, root.height); } property bool isScreenPortrait: height > width property color lightFontColor: "#222" property color darkFontColor: "#e7e7e7" readonly property color lightBackgroundColor: "#cccccc" readonly property color darkBackgroundColor: "#161616" property real customizerPropertySpacing: 10 property real colorPickerRowSpacing: 8 Text { id: textSingleton } property Component circularGauge: CircularGaugeView {} property Component dial: ControlView { darkBackground: false control: Column { id: dialColumn width: controlBounds.width height: controlBounds.height - spacing spacing: root.toPixels(0.05) ColumnLayout { id: volumeColumn width: parent.width height: (dialColumn.height - dialColumn.spacing) / 2 spacing: height * 0.025 Dial { id: volumeDial Layout.alignment: Qt.AlignCenter Layout.fillWidth: true Layout.fillHeight: true /*! Determines whether the dial animates its rotation to the new value when a single click or touch is received on the dial. */ property bool animate: customizerItem.animate Behavior on value { enabled: volumeDial.animate && !volumeDial.pressed NumberAnimation { duration: 300 easing.type: Easing.OutSine } } } ControlLabel { id: volumeText text: "Volume" Layout.alignment: Qt.AlignCenter } } ColumnLayout { id: trebleColumn width: parent.width height: (dialColumn.height - dialColumn.spacing) / 2 spacing: height * 0.025 Dial { id: dial2 Layout.alignment: Qt.AlignCenter Layout.fillWidth: true Layout.fillHeight: true stepSize: 1 maximumValue: 10 style: DialStyle { labelInset: outerRadius * 0 } } ControlLabel { id: trebleText text: "Treble" Layout.alignment: Qt.AlignCenter } } } customizer: Column { spacing: customizerPropertySpacing property alias animate: animateCheckBox.checked CustomizerLabel { text: "Animate" } CustomizerSwitch { id: animateCheckBox } } } property Component delayButton: ControlView { darkBackground: false control: DelayButton { text: "Alarm" anchors.centerIn: parent } } property Component gauge: ControlView { id: gaugeView control: Gauge { id: gauge width: orientation === Qt.Vertical ? implicitWidth : gaugeView.controlBounds.width height: orientation === Qt.Vertical ? gaugeView.controlBounds.height : implicitHeight anchors.centerIn: parent minimumValue: 0 value: customizerItem.value maximumValue: 100 orientation: customizerItem.orientationFlag ? Qt.Vertical : Qt.Horizontal tickmarkAlignment: orientation === Qt.Vertical ? (customizerItem.alignFlag ? Qt.AlignLeft : Qt.AlignRight) : (customizerItem.alignFlag ? Qt.AlignTop : Qt.AlignBottom) } customizer: Column { spacing: customizerPropertySpacing property alias value: valueSlider.value property alias orientationFlag: orientationCheckBox.checked property alias alignFlag: alignCheckBox.checked CustomizerLabel { text: "Value" } CustomizerSlider { id: valueSlider minimumValue: 0 value: 50 maximumValue: 100 } CustomizerLabel { text: "Vertical orientation" } CustomizerSwitch { id: orientationCheckBox checked: true } CustomizerLabel { text: controlItem.orientation === Qt.Vertical ? "Left align" : "Top align" } CustomizerSwitch { id: alignCheckBox checked: true } } } property Component toggleButton: ControlView { darkBackground: false control: ToggleButton { text: checked ? "On" : "Off" anchors.centerIn: parent } } property Component pieMenu: PieMenuControlView {} property Component statusIndicator: ControlView { id: statusIndicatorView darkBackground: false Timer { id: recordingFlashTimer running: true repeat: true interval: 1000 } ColumnLayout { id: indicatorLayout width: statusIndicatorView.controlBounds.width * 0.25 height: statusIndicatorView.controlBounds.height * 0.75 anchors.centerIn: parent Repeater { model: ListModel { id: indicatorModel ListElement { name: "Power" indicatorColor: "#35e02f" } ListElement { name: "Recording" indicatorColor: "red" } } ColumnLayout { Layout.preferredWidth: indicatorLayout.width spacing: 0 StatusIndicator { id: indicator color: indicatorColor Layout.preferredWidth: statusIndicatorView.controlBounds.width * 0.07 Layout.preferredHeight: Layout.preferredWidth Layout.alignment: Qt.AlignHCenter on: true Connections { target: recordingFlashTimer onTriggered: if (name == "Recording") indicator.active = !indicator.active } } ControlLabel { id: indicatorLabel text: name Layout.alignment: Qt.AlignHCenter Layout.maximumWidth: parent.width horizontalAlignment: Text.AlignHCenter } } } } } property Component tumbler: ControlView { id: tumblerView darkBackground: false Tumbler { id: tumbler anchors.centerIn: parent // TODO: Use FontMetrics with 5.4 Label { id: characterMetrics font.bold: true font.pixelSize: textSingleton.font.pixelSize * 1.25 font.family: openSans.name visible: false text: "M" } readonly property real delegateTextMargins: characterMetrics.width * 1.5 readonly property var days: [31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31] TumblerColumn { id: tumblerDayColumn function updateModel() { var previousIndex = tumblerDayColumn.currentIndex; var newDays = tumbler.days[monthColumn.currentIndex]; if (!model) { var array = []; for (var i = 0; i < newDays; ++i) { array.push(i + 1); } model = array; } else { // If we've already got days in the model, just add or remove // the minimum amount necessary to make spinning the month column fast. var difference = model.length - newDays; if (model.length > newDays) { model.splice(model.length - 1, difference); } else { var lastDay = model[model.length - 1]; for (i = lastDay; i < lastDay + difference; ++i) { model.push(i + 1); } } } tumbler.setCurrentIndexAt(0, Math.min(newDays - 1, previousIndex)); } } TumblerColumn { id: monthColumn width: characterMetrics.width * 3 + tumbler.delegateTextMargins model: ["Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"] onCurrentIndexChanged: tumblerDayColumn.updateModel() } TumblerColumn { width: characterMetrics.width * 4 + tumbler.delegateTextMargins model: ListModel { Component.onCompleted: { for (var i = 2000; i < 2100; ++i) { append({value: i.toString()}); } } } } } } FontLoader { id: openSans source: "qrc:/fonts/OpenSans-Regular.ttf" } property var componentMap: { "CircularGauge": circularGauge, "DelayButton": delayButton, "Dial": dial, "Gauge": gauge, "PieMenu": pieMenu, "StatusIndicator": statusIndicator, "ToggleButton": toggleButton, "Tumbler": tumbler } StackView { id: stackView anchors.fill: parent initialItem: ListView { model: ListModel { ListElement { title: "CircularGauge" } ListElement { title: "DelayButton" } ListElement { title: "Dial" } ListElement { title: "Gauge" } ListElement { title: "PieMenu" } ListElement { title: "StatusIndicator" } ListElement { title: "ToggleButton" } ListElement { title: "Tumbler" } } delegate: Button { width: stackView.width height: root.height * 0.125 text: title style: BlackButtonStyle { fontColor: root.darkFontColor rightAlignedIconSource: "qrc:/images/icon-go.png" } onClicked: { if (stackView.depth == 1) { // Only push the control view if we haven't already pushed it... stackView.push({item: componentMap[title]}); stackView.currentItem.forceActiveFocus(); } } } } } }
© 2019 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.