/****************************************************************************
**
** Copyright (C) 2016 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** BSD License Usage
** Alternatively, you may use this file under the terms of the BSD license
** as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of The Qt Company Ltd nor the names of its
**     contributors may be used to endorse or promote products derived
**     from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include <QtWidgets>
#if defined(QT_PRINTSUPPORT_LIB)
#include <QtPrintSupport/qtprintsupportglobal.h>
#if QT_CONFIG(printdialog)
#include <QtPrintSupport>
#endif
#endif

#include "mainwindow.h"

MainWindow::MainWindow()
    : textEdit(new QTextEdit)
{
    setCentralWidget(textEdit);

    createActions();
    createStatusBar();
    createDockWindows();

    setWindowTitle(tr("Dock Widgets"));

    newLetter();
    setUnifiedTitleAndToolBarOnMac(true);
}

void MainWindow::newLetter()
{
    textEdit->clear();

    QTextCursor cursor(textEdit->textCursor());
    cursor.movePosition(QTextCursor::Start);
    QTextFrame *topFrame = cursor.currentFrame();
    QTextFrameFormat topFrameFormat = topFrame->frameFormat();
    topFrameFormat.setPadding(16);
    topFrame->setFrameFormat(topFrameFormat);

    QTextCharFormat textFormat;
    QTextCharFormat boldFormat;
    boldFormat.setFontWeight(QFont::Bold);
    QTextCharFormat italicFormat;
    italicFormat.setFontItalic(true);

    QTextTableFormat tableFormat;
    tableFormat.setBorder(1);
    tableFormat.setCellPadding(16);
    tableFormat.setAlignment(Qt::AlignRight);
    cursor.insertTable(1, 1, tableFormat);
    cursor.insertText("The Firm", boldFormat);
    cursor.insertBlock();
    cursor.insertText("321 City Street", textFormat);
    cursor.insertBlock();
    cursor.insertText("Industry Park");
    cursor.insertBlock();
    cursor.insertText("Some Country");
    cursor.setPosition(topFrame->lastPosition());
    cursor.insertText(QDate::currentDate().toString("d MMMM yyyy"), textFormat);
    cursor.insertBlock();
    cursor.insertBlock();
    cursor.insertText("Dear ", textFormat);
    cursor.insertText("NAME", italicFormat);
    cursor.insertText(",", textFormat);
    for (int i = 0; i < 3; ++i)
        cursor.insertBlock();
    cursor.insertText(tr("Yours sincerely,"), textFormat);
    for (int i = 0; i < 3; ++i)
        cursor.insertBlock();
    cursor.insertText("The Boss", textFormat);
    cursor.insertBlock();
    cursor.insertText("ADDRESS", italicFormat);
}

void MainWindow::print()
{
#if QT_CONFIG(printdialog)
    QTextDocument *document = textEdit->document();
    QPrinter printer;

    QPrintDialog dlg(&printer, this);
    if (dlg.exec() != QDialog::Accepted) {
        return;
    }

    document->print(&printer);
    statusBar()->showMessage(tr("Ready"), 2000);
#endif
}

void MainWindow::save()
{
    QMimeDatabase mimeDatabase;
    QString fileName = QFileDialog::getSaveFileName(this,
                        tr("Choose a file name"), ".",
                        mimeDatabase.mimeTypeForName("text/html").filterString());
    if (fileName.isEmpty())
        return;
    QFile file(fileName);
    if (!file.open(QFile::WriteOnly | QFile::Text)) {
        QMessageBox::warning(this, tr("Dock Widgets"),
                             tr("Cannot write file %1:\n%2.")
                             .arg(QDir::toNativeSeparators(fileName), file.errorString()));
        return;
    }

    QTextStream out(&file);
    QApplication::setOverrideCursor(Qt::WaitCursor);
    out << textEdit->toHtml();
    QApplication::restoreOverrideCursor();

    statusBar()->showMessage(tr("Saved '%1'").arg(fileName), 2000);
}

void MainWindow::undo()
{
    QTextDocument *document = textEdit->document();
    document->undo();
}

void MainWindow::insertCustomer(const QString &customer)
{
    if (customer.isEmpty())
        return;
    QStringList customerList = customer.split(", ");
    QTextDocument *document = textEdit->document();
    QTextCursor cursor = document->find("NAME");
    if (!cursor.isNull()) {
        cursor.beginEditBlock();
        cursor.insertText(customerList.at(0));
        QTextCursor oldcursor = cursor;
        cursor = document->find("ADDRESS");
        if (!cursor.isNull()) {
            for (int i = 1; i < customerList.size(); ++i) {
                cursor.insertBlock();
                cursor.insertText(customerList.at(i));
            }
            cursor.endEditBlock();
        }
        else
            oldcursor.endEditBlock();
    }
}

void MainWindow::addParagraph(const QString &paragraph)
{
    if (paragraph.isEmpty())
        return;
    QTextDocument *document = textEdit->document();
    QTextCursor cursor = document->find(tr("Yours sincerely,"));
    if (cursor.isNull())
        return;
    cursor.beginEditBlock();
    cursor.movePosition(QTextCursor::PreviousBlock, QTextCursor::MoveAnchor, 2);
    cursor.insertBlock();
    cursor.insertText(paragraph);
    cursor.insertBlock();
    cursor.endEditBlock();

}

void MainWindow::about()
{
   QMessageBox::about(this, tr("About Dock Widgets"),
            tr("The <b>Dock Widgets</b> example demonstrates how to "
               "use Qt's dock widgets. You can enter your own text, "
               "click a customer to add a customer name and "
               "address, and click standard paragraphs to add them."));
}

void MainWindow::createActions()
{
    QMenu *fileMenu = menuBar()->addMenu(tr("&File"));
    QToolBar *fileToolBar = addToolBar(tr("File"));

    const QIcon newIcon = QIcon::fromTheme("document-new", QIcon(":/images/new.png"));
    QAction *newLetterAct = new QAction(newIcon, tr("&New Letter"), this);
    newLetterAct->setShortcuts(QKeySequence::New);
    newLetterAct->setStatusTip(tr("Create a new form letter"));
    connect(newLetterAct, &QAction::triggered, this, &MainWindow::newLetter);
    fileMenu->addAction(newLetterAct);
    fileToolBar->addAction(newLetterAct);

    const QIcon saveIcon = QIcon::fromTheme("document-save", QIcon(":/images/save.png"));
    QAction *saveAct = new QAction(saveIcon, tr("&Save..."), this);
    saveAct->setShortcuts(QKeySequence::Save);
    saveAct->setStatusTip(tr("Save the current form letter"));
    connect(saveAct, &QAction::triggered, this, &MainWindow::save);
    fileMenu->addAction(saveAct);
    fileToolBar->addAction(saveAct);

    const QIcon printIcon = QIcon::fromTheme("document-print", QIcon(":/images/print.png"));
    QAction *printAct = new QAction(printIcon, tr("&Print..."), this);
    printAct->setShortcuts(QKeySequence::Print);
    printAct->setStatusTip(tr("Print the current form letter"));
    connect(printAct, &QAction::triggered, this, &MainWindow::print);
    fileMenu->addAction(printAct);
    fileToolBar->addAction(printAct);

    fileMenu->addSeparator();

    QAction *quitAct = fileMenu->addAction(tr("&Quit"), this, &QWidget::close);
    quitAct->setShortcuts(QKeySequence::Quit);
    quitAct->setStatusTip(tr("Quit the application"));

    QMenu *editMenu = menuBar()->addMenu(tr("&Edit"));
    QToolBar *editToolBar = addToolBar(tr("Edit"));
    const QIcon undoIcon = QIcon::fromTheme("edit-undo", QIcon(":/images/undo.png"));
    QAction *undoAct = new QAction(undoIcon, tr("&Undo"), this);
    undoAct->setShortcuts(QKeySequence::Undo);
    undoAct->setStatusTip(tr("Undo the last editing action"));
    connect(undoAct, &QAction::triggered, this, &MainWindow::undo);
    editMenu->addAction(undoAct);
    editToolBar->addAction(undoAct);

    viewMenu = menuBar()->addMenu(tr("&View"));

    menuBar()->addSeparator();

    QMenu *helpMenu = menuBar()->addMenu(tr("&Help"));

    QAction *aboutAct = helpMenu->addAction(tr("&About"), this, &MainWindow::about);
    aboutAct->setStatusTip(tr("Show the application's About box"));

    QAction *aboutQtAct = helpMenu->addAction(tr("About &Qt"), qApp, &QApplication::aboutQt);
    aboutQtAct->setStatusTip(tr("Show the Qt library's About box"));
}

void MainWindow::createStatusBar()
{
    statusBar()->showMessage(tr("Ready"));
}

void MainWindow::createDockWindows()
{
    QDockWidget *dock = new QDockWidget(tr("Customers"), this);
    dock->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea);
    customerList = new QListWidget(dock);
    customerList->addItems(QStringList()
            << "John Doe, Harmony Enterprises, 12 Lakeside, Ambleton"
            << "Jane Doe, Memorabilia, 23 Watersedge, Beaton"
            << "Tammy Shea, Tiblanka, 38 Sea Views, Carlton"
            << "Tim Sheen, Caraba Gifts, 48 Ocean Way, Deal"
            << "Sol Harvey, Chicos Coffee, 53 New Springs, Eccleston"
            << "Sally Hobart, Tiroli Tea, 67 Long River, Fedula");
    dock->setWidget(customerList);
    addDockWidget(Qt::RightDockWidgetArea, dock);
    viewMenu->addAction(dock->toggleViewAction());

    dock = new QDockWidget(tr("Paragraphs"), this);
    paragraphsList = new QListWidget(dock);
    paragraphsList->addItems(QStringList()
            << "Thank you for your payment which we have received today."
            << "Your order has been dispatched and should be with you "
               "within 28 days."
            << "We have dispatched those items that were in stock. The "
               "rest of your order will be dispatched once all the "
               "remaining items have arrived at our warehouse. No "
               "additional shipping charges will be made."
            << "You made a small overpayment (less than $5) which we "
               "will keep on account for you, or return at your request."
            << "You made a small underpayment (less than $1), but we have "
               "sent your order anyway. We'll add this underpayment to "
               "your next bill."
            << "Unfortunately you did not send enough money. Please remit "
               "an additional $. Your order will be dispatched as soon as "
               "the complete amount has been received."
            << "You made an overpayment (more than $5). Do you wish to "
               "buy more items, or should we return the excess to you?");
    dock->setWidget(paragraphsList);
    addDockWidget(Qt::RightDockWidgetArea, dock);
    viewMenu->addAction(dock->toggleViewAction());

    connect(customerList, &QListWidget::currentTextChanged,
            this, &MainWindow::insertCustomer);
    connect(paragraphsList, &QListWidget::currentTextChanged,
            this, &MainWindow::addParagraph);
}