» Data Source: azurestack_virtual_network_gateway

Use this data source to access the properties of an Azure Virtual Network Gateway.

» Example Usage 

data "azurestack_virtual_network_gateway" "test" {
  name                = "production"
  resource_group_name = "networking"
}

output "virtual_network_gateway_id" {
  value = "${data.azurestack_virtual_network_gateway.test.id}"
}

» Argument Reference

  • name - (Required) Specifies the name of the Virtual Network Gateway.
  • resource_group_name - (Required) Specifies the name of the resource group the Virtual Network Gateway is located in.

» Attributes Reference

  • id - The ID of the Virtual Network Gateway.

  • location - The location/region where the Virtual Network Gateway is located.

  • type - The type of the Virtual Network Gateway.

  • vpn_type - The routing type of the Virtual Network Gateway.

  • enable_bgp - Will BGP (Border Gateway Protocol) will be enabled for this Virtual Network Gateway.

  • default_local_network_gateway_id - The ID of the local network gateway through which outbound Internet traffic from the virtual network in which the gateway is created will be routed (forced tunneling). Refer to the Azure documentation on forced tunneling.

  • sku - Configuration of the size and capacity of the Virtual Network Gateway.

  • ip_configuration - One or two ip_configuration blocks documented below.

  • vpn_client_configuration - A vpn_client_configuration block which is documented below.

  • tags - A mapping of tags assigned to the resource.

The ip_configuration block supports:

  • name - A user-defined name of the IP configuration.

  • private_ip_address_allocation - Defines how the private IP address of the gateways virtual interface is assigned.

  • subnet_id - The ID of the gateway subnet of a virtual network in which the virtual network gateway will be created. It is mandatory that the associated subnet is named GatewaySubnet. Therefore, each virtual network can contain at most a single Virtual Network Gateway.

  • public_ip_address_id - The ID of the Public IP Address associated with the Virtual Network Gateway.

The vpn_client_configuration block supports:

  • address_space - The address space out of which ip addresses for vpn clients will be taken. You can provide more than one address space, e.g. in CIDR notation.

  • root_certificate - One or more root_certificate blocks which are defined below. These root certificates are used to sign the client certificate used by the VPN clients to connect to the gateway.

  • revoked_certificate - One or more revoked_certificate blocks which are defined below.

The bgp_settings block supports:

  • asn - The Autonomous System Number (ASN) to use as part of the BGP.

  • peering_address - The BGP peer IP address of the virtual network gateway. This address is needed to configure the created gateway as a BGP Peer on the on-premises VPN devices.

  • peer_weight - The weight added to routes which have been learned through BGP peering.

The root_certificate block supports:

  • name - The user-defined name of the root certificate.

  • public_cert_data - The public certificate of the root certificate authority. The certificate must be provided in Base-64 encoded X.509 format (PEM).

The root_revoked_certificate block supports:

  • name - The user-defined name of the revoked certificate.

  • public_cert_data - The SHA1 thumbprint of the certificate to be revoked.