» ignition_raid

Describes the desired state of the system’s RAID.

» Example Usage

data "ignition_raid" "md" {
    name = "data"
    level = "stripe"
    devices = [
        "/dev/disk/by-partlabel/raid.1.1",
        "/dev/disk/by-partlabel/raid.1.2"
    ]
}

data "ignition_disk" "disk1" {
    device = "/dev/sdb"
    wipe_table = true
    partition {
        label = "raid.1.1"
        number = 1
        size = 20480
        start = 0
    }
}

data "ignition_disk" "disk2" {
    device = "/dev/sdc"
    wipe_table = true
    partition {
        label = "raid.1.2"
        number = 1
        size = 20480
        start = 0
    }
}

» Argument Reference

The following arguments are supported:

• name - (Required) The name to use for the resulting md device.

• level - (Required) The redundancy level of the array (e.g. linear, raid1, raid5, etc.).

• devices - (Required) The list of devices (referenced by their absolute path) in the array.

• spares - (Optional) The number of spares (if applicable) in the array.

» Attributes Reference

The following attributes are exported:

• id - ID used to reference this resource in ignition_config