» panos_panorama_vlan_interface

This resource allows you to add/update/delete Panorama VLAN interfaces for templates.

» Import Name

<template>:<template_stack>:<vsys>:<name>

» Example Usage

resource "panos_panorama_vlan_interface" "example" {
    name = "vlan.17"
    template = "foo"
    mode = "layer3"
    static_ips = ["10.1.1.1/24"]
    comment = "Configured for internal traffic"
}

» Argument Reference

The following arguments are supported:

• name - (Required) The interface's name. Must start with vlan..
• template - (Required) The template name.
• vsys - (Optional) The vsys that will use this interface (default: vsys1).
• comment - (Optional) The interface comment.
• netflow_profile - (Optional) The netflow profile.
• static_ips - (Optional) List of static IPv4 addresses to set for this data interface.
• enable_dhcp - (Optional) Set to true to enable DHCP on this interface.
• create_dhcp_default_route - (Optional) Set to true to create a DHCP default route.
• dhcp_default_route_metric - (Optional) The metric for the DHCP default route.
• management_profile - (Optional) The management profile.
• mtu - (Optional) The MTU.
• adjust_tcp_mss - (Optional) Adjust TCP MSS (default: false).
• ipv4_mss_adjust - (Optional, PAN-OS 8.0+) The IPv4 MSS adjust value.
• ipv6_mss_adjust - (Optional, PAN-OS 8.0+) The IPv6 MSS adjust value.