`tornado.httpclient` — Asynchronous HTTP client¶

Blocking and non-blocking HTTP client interfaces.

This module defines a common interface shared by two implementations, simple_httpclient and curl_httpclient. Applications may either instantiate their chosen implementation class directly or use the AsyncHTTPClient class from this module, which selects an implementation that can be overridden with the AsyncHTTPClient.configure method.

The default implementation is simple_httpclient, and this is expected to be suitable for most users’ needs. However, some applications may wish to switch to curl_httpclient for reasons such as the following:

curl_httpclient has some features not found in simple_httpclient, including support for HTTP proxies and the ability to use a specified network interface.
curl_httpclient is more likely to be compatible with sites that are not-quite-compliant with the HTTP spec, or sites that use little-exercised features of HTTP.
curl_httpclient is faster.
curl_httpclient was the default prior to Tornado 2.0.

Note that if you are using curl_httpclient, it is highly recommended that you use a recent version of libcurl and pycurl. Currently the minimum supported version of libcurl is 7.21.1, and the minimum version of pycurl is 7.18.2. It is highly recommended that your libcurl installation is built with asynchronous DNS resolver (threaded or c-ares), otherwise you may encounter various problems with request timeouts (for more information, see http://curl.haxx.se/libcurl/c/curl_easy_setopt.html#CURLOPTCONNECTTIMEOUTMS and comments in curl_httpclient.py).

To select curl_httpclient, call AsyncHTTPClient.configure at startup:

AsyncHTTPClient.configure("tornado.curl_httpclient.CurlAsyncHTTPClient")

HTTP client interfaces¶

class tornado.httpclient.HTTPClient(async_client_class=None, **kwargs)[source]¶

A blocking HTTP client.

This interface is provided for convenience and testing; most applications that are running an IOLoop will want to use AsyncHTTPClient instead. Typical usage looks like this:

http_client = httpclient.HTTPClient()
try:
    response = http_client.fetch("http://www.google.com/")
    print response.body
except httpclient.HTTPError as e:
    # HTTPError is raised for non-200 responses; the response
    # can be found in e.response.
    print("Error: " + str(e))
except Exception as e:
    # Other errors are possible, such as IOError.
    print("Error: " + str(e))
http_client.close()

close()[source]¶: Closes the HTTPClient, freeing any resources used.

fetch(request, **kwargs)[source]¶

Executes a request, returning an HTTPResponse.

The request may be either a string URL or an HTTPRequest object. If it is a string, we construct an HTTPRequest using any additional kwargs: HTTPRequest(request, **kwargs)

If an error occurs during the fetch, we raise an HTTPError unless the raise_error keyword argument is set to False.

class tornado.httpclient.AsyncHTTPClient[source]¶

An non-blocking HTTP client.

Example usage:

def handle_request(response):
    if response.error:
        print "Error:", response.error
    else:
        print response.body

http_client = AsyncHTTPClient()
http_client.fetch("http://www.google.com/", handle_request)

The constructor for this class is magic in several respects: It actually creates an instance of an implementation-specific subclass, and instances are reused as a kind of pseudo-singleton (one per IOLoop). The keyword argument force_instance=True can be used to suppress this singleton behavior. Unless force_instance=True is used, no arguments other than io_loop should be passed to the AsyncHTTPClient constructor. The implementation subclass as well as arguments to its constructor can be set with the static method configure()

All AsyncHTTPClient implementations support a defaults keyword argument, which can be used to set default values for HTTPRequest attributes. For example:

AsyncHTTPClient.configure(
    None, defaults=dict(user_agent="MyUserAgent"))
# or with force_instance:
client = AsyncHTTPClient(force_instance=True,
    defaults=dict(user_agent="MyUserAgent"))

Changed in version 4.1: The io_loop argument is deprecated.

close()[source]¶

Destroys this HTTP client, freeing any file descriptors used.

This method is not needed in normal use due to the way that AsyncHTTPClient objects are transparently reused. close() is generally only necessary when either the IOLoop is also being closed, or the force_instance=True argument was used when creating the AsyncHTTPClient.

No other methods may be called on the AsyncHTTPClient after close().

fetch(request, callback=None, raise_error=True, **kwargs)[source]¶

Executes a request, asynchronously returning an HTTPResponse.

The request may be either a string URL or an HTTPRequest object. If it is a string, we construct an HTTPRequest using any additional kwargs: HTTPRequest(request, **kwargs)

This method returns a Future whose result is an HTTPResponse. By default, the Future will raise an HTTPError if the request returned a non-200 response code. Instead, if raise_error is set to False, the response will always be returned regardless of the response code.

If a callback is given, it will be invoked with the HTTPResponse. In the callback interface, HTTPError is not automatically raised. Instead, you must check the response’s error attribute or call its rethrow method.

classmethod configure(impl, **kwargs)[source]¶

Configures the AsyncHTTPClient subclass to use.

AsyncHTTPClient() actually creates an instance of a subclass. This method may be called with either a class object or the fully-qualified name of such a class (or None to use the default, SimpleAsyncHTTPClient)

If additional keyword arguments are given, they will be passed to the constructor of each subclass instance created. The keyword argument max_clients determines the maximum number of simultaneous fetch() operations that can execute in parallel on each IOLoop. Additional arguments may be supported depending on the implementation class in use.

Example:

AsyncHTTPClient.configure("tornado.curl_httpclient.CurlAsyncHTTPClient")

Request objects¶

class tornado.httpclient.HTTPRequest(url, method='GET', headers=None, body=None, auth_username=None, auth_password=None, auth_mode=None, connect_timeout=None, request_timeout=None, if_modified_since=None, follow_redirects=None, max_redirects=None, user_agent=None, use_gzip=None, network_interface=None, streaming_callback=None, header_callback=None, prepare_curl_callback=None, proxy_host=None, proxy_port=None, proxy_username=None, proxy_password=None, allow_nonstandard_methods=None, validate_cert=None, ca_certs=None, allow_ipv6=None, client_key=None, client_cert=None, body_producer=None, expect_100_continue=False, decompress_response=None, ssl_options=None)[source]¶

HTTP client request object.

All parameters except url are optional.

Parameters:

url (string) – URL to fetch
method (string) – HTTP method, e.g. “GET” or “POST”
headers (HTTPHeaders or dict) – Additional HTTP headers to pass on the request
body – HTTP request body as a string (byte or unicode; if unicode the utf-8 encoding will be used)
body_producer – Callable used for lazy/asynchronous request bodies. It is called with one argument, a write function, and should return a Future. It should call the write function with new data as it becomes available. The write function returns a Future which can be used for flow control. Only one of body and body_producer may be specified. body_producer is not supported on curl_httpclient. When using body_producer it is recommended to pass a Content-Length in the headers as otherwise chunked encoding will be used, and many servers do not support chunked encoding on requests. New in Tornado 4.0
auth_username (string) – Username for HTTP authentication
auth_password (string) – Password for HTTP authentication
auth_mode (string) – Authentication mode; default is “basic”. Allowed values are implementation-defined; curl_httpclient supports “basic” and “digest”; simple_httpclient only supports “basic”
connect_timeout (float) – Timeout for initial connection in seconds
request_timeout (float) – Timeout for entire request in seconds
if_modified_since (datetime or float) – Timestamp for If-Modified-Since header
follow_redirects (bool) – Should redirects be followed automatically or return the 3xx response?
max_redirects (int) – Limit for follow_redirects
user_agent (string) – String to send as User-Agent header
decompress_response (bool) – Request a compressed response from the server and decompress it after downloading. Default is True. New in Tornado 4.0.
use_gzip (bool) – Deprecated alias for decompress_response since Tornado 4.0.
network_interface (string) – Network interface to use for request. curl_httpclient only; see note below.
streaming_callback (callable) – If set, streaming_callback will be run with each chunk of data as it is received, and HTTPResponse.body and HTTPResponse.buffer will be empty in the final response.
header_callback (callable) – If set, header_callback will be run with each header line as it is received (including the first line, e.g. HTTP/1.0 200 OK\r\n, and a final line containing only \r\n. All lines include the trailing newline characters). HTTPResponse.headers will be empty in the final response. This is most useful in conjunction with streaming_callback, because it’s the only way to get access to header data while the request is in progress.
prepare_curl_callback (callable) – If set, will be called with a pycurl.Curl object to allow the application to make additional setopt calls.
proxy_host (string) – HTTP proxy hostname. To use proxies, proxy_host and proxy_port must be set; proxy_username and proxy_pass are optional. Proxies are currently only supported with curl_httpclient.
proxy_port (int) – HTTP proxy port
proxy_username (string) – HTTP proxy username
proxy_password (string) – HTTP proxy password
allow_nonstandard_methods (bool) – Allow unknown values for method argument?
validate_cert (bool) – For HTTPS requests, validate the server’s certificate?
ca_certs (string) – filename of CA certificates in PEM format, or None to use defaults. See note below when used with curl_httpclient.
client_key (string) – Filename for client SSL key, if any. See note below when used with curl_httpclient.
client_cert (string) – Filename for client SSL certificate, if any. See note below when used with curl_httpclient.
ssl_options (ssl.SSLContext) – ssl.SSLContext object for use in simple_httpclient (unsupported by curl_httpclient). Overrides validate_cert, ca_certs, client_key, and client_cert.
allow_ipv6 (bool) – Use IPv6 when available? Default is true.
expect_100_continue (bool) – If true, send the Expect: 100-continue header and wait for a continue response before sending the request body. Only supported with simple_httpclient.

Note

When using curl_httpclient certain options may be inherited by subsequent fetches because pycurl does not allow them to be cleanly reset. This applies to the ca_certs, client_key, client_cert, and network_interface arguments. If you use these options, you should pass them on every request (you don’t have to always use the same values, but it’s not possible to mix requests that specify these options with ones that use the defaults).

New in version 3.1: The auth_mode argument.

New in version 4.0: The body_producer and expect_100_continue arguments.

New in version 4.2: The ssl_options argument.

Response objects¶

class tornado.httpclient.HTTPResponse(request, code, headers=None, buffer=None, effective_url=None, error=None, request_time=None, time_info=None, reason=None)[source]¶

HTTP Response object.

Attributes:

request: HTTPRequest object
code: numeric HTTP status code, e.g. 200 or 404
reason: human-readable reason phrase describing the status code
headers: tornado.httputil.HTTPHeaders object
effective_url: final location of the resource after following any redirects
buffer: cStringIO object for response body
body: response body as string (created on demand from self.buffer)
error: Exception object, if any
request_time: seconds from request start to finish
time_info: dictionary of diagnostic timing information from the request. Available data are subject to change, but currently uses timings available from http://curl.haxx.se/libcurl/c/curl_easy_getinfo.html, plus queue, which is the delay (if any) introduced by waiting for a slot under AsyncHTTPClient‘s max_clients setting.

rethrow()[source]¶: If there was an error on the request, raise an HTTPError.

Exceptions¶

exception tornado.httpclient.HTTPError(code, message=None, response=None)[source]¶

Exception thrown for an unsuccessful HTTP request.

Attributes:

code - HTTP error integer error code, e.g. 404. Error code 599 is used when no HTTP response was received, e.g. for a timeout.
response - HTTPResponse object, if any.

Note that if follow_redirects is False, redirects become HTTPErrors, and you can look at error.response.headers['Location'] to see the destination of the redirect.

Command-line interface¶

This module provides a simple command-line interface to fetch a url using Tornado’s HTTP client. Example usage:

# Fetch the url and print its body
python -m tornado.httpclient http://www.google.com

# Just print the headers
python -m tornado.httpclient --print_headers --print_body=false http://www.google.com

Implementations¶

class tornado.simple_httpclient.SimpleAsyncHTTPClient[source]¶

Non-blocking HTTP client with no external dependencies.

This class implements an HTTP 1.1 client on top of Tornado’s IOStreams. Some features found in the curl-based AsyncHTTPClient are not yet supported. In particular, proxies are not supported, connections are not reused, and callers cannot select the network interface to be used.

initialize(io_loop, max_clients=10, hostname_mapping=None, max_buffer_size=104857600, resolver=None, defaults=None, max_header_size=None, max_body_size=None)[source]¶

Creates a AsyncHTTPClient.

Only a single AsyncHTTPClient instance exists per IOLoop in order to provide limitations on the number of pending connections. force_instance=True may be used to suppress this behavior.

Note that because of this implicit reuse, unless force_instance is used, only the first call to the constructor actually uses its arguments. It is recommended to use the configure method instead of the constructor to ensure that arguments take effect.

max_clients is the number of concurrent requests that can be in progress; when this limit is reached additional requests will be queued. Note that time spent waiting in this queue still counts against the request_timeout.

hostname_mapping is a dictionary mapping hostnames to IP addresses. It can be used to make local DNS changes when modifying system-wide settings like /etc/hosts is not possible or desirable (e.g. in unittests).

max_buffer_size (default 100MB) is the number of bytes that can be read into memory at once. max_body_size (defaults to max_buffer_size) is the largest response body that the client will accept. Without a streaming_callback, the smaller of these two limits applies; with a streaming_callback only max_body_size does.

Changed in version 4.2: Added the max_body_size argument.

class tornado.curl_httpclient.CurlAsyncHTTPClient(io_loop, max_clients=10, defaults=None)¶: libcurl-based HTTP client.

tornado.httpclient — Asynchronous HTTP client¶