System Requirements 2016r3
From Xojo Documentation
Contents
Xojo IDE
The Xojo IDE can be used on systems that meet the following requirements:
Windows | OS X | Linux (x86, x86-64) | |
---|---|---|---|
OS |
Both 32-bit and 64-bit versions of Windows are supported. |
iOS development requires 10.10.x or later and Xcode 7.x or later. See below for iOS requirements.
2 OS X 10.7 and 10.8 support is deprecated. |
32-bit distributions are recommended (refer to Linux Information below regarding 64-bit).
The Xojo IDE does not run on ARM.
|
RAM | Minimum 2GB | Minimum 2GB | Minimum 2GB |
Other | PDF viewer for documentation | PDF viewer for documentation |
Desktop Apps
Desktop apps created with Xojo have these requirements:
Windows | OS X | Linux (x86, x86-64) | Raspberry Pi | |
---|---|---|---|---|
OS |
32-bit and 64-bit versions of Windows are supported.
|
2 OS X 10.7 and 10.8 support is <a hqid="291564" href="#">deprecated</a>. |
32-bit and 64-bit versions of Linux are supported.
For best results on 64-bit distributions, build a 64-bit app.
|
32-bit ARMv7 is supported (Pi 2 and Pi 3).
|
Web Apps
Web apps consist of two parts: user interface displayed in the web browser and the app itself.
Web Browser
Your users can use a web app in one of the following browsers for these platforms:
Windows | OS X / OS X Server | Linux | iOS | Android | Raspberry Pi | |
---|---|---|---|---|---|---|
Browser |
|
|
|
|
|
|
Security
For SSL with IE 9 or 10, you may need manually enable TLSv12 with these steps:
- Select "Tools" ↠ "Internet Options". Depending on your IE settings, the "Tools" menu may be a gear icon in the upper right hand corner.
- Go to the "Advanced" tab.
- Scroll down to the "Security" section.
- Locate and check "Use TLS 1.2" in the Security section.
- Then, press the "OK" button.
You may need to close and reopen all open browser windows in order for these new settings to take effect.
Web Server / Deployment
Web apps can be deployed to servers with these requirements:
Windows | OS X / OS X Server | Linux (x86, x86-64) | Raspberry Pi | |
---|---|---|---|---|
OS |
32-bit and 64-bit servers are supported.
|
2 OS X 10.7 and 10.8 support is <a hqid="291564" href="#">deprecated</a>. |
32-bit and 64-bit servers are supported.
|
32-bit ARMv7 is supported (Pi 2 and Pi 3).
|
Deployment |
|
|
|
Console Apps
Console apps do not have a user interface and run on systems with these requirements (or any of the server requirements listed for Web Apps):
Windows | OS X / OS X Server | Linux (x86, x86-64) | Raspberry Pi | |
---|---|---|---|---|
OS |
|
2 OS X 10.7 and 10.8 support is <a hqid="291564" href="#">deprecated</a>. |
|
32-bit ARMv7 is supported (Pi 2 and Pi 3).
|
CPU Compatibility
x86 CPUs require the SSE2 instruction set for the IDE and built applications. The vast majority of desktop CPUs in use support this, but some x86 single board computers may not.
ARM CPUs must support the 32-bit ARMv7 architecture.
iOS Apps
In order to work on iOS projects, you must be using Xojo on OS X 10.10 and later with Xcode 7.x or Xcode 8.x (required for iOS Simulator).
Required macOS versions |
|
---|---|
Required Xcode versions |
|
Supported iOS Versions |
|
Supported iOS Devices |
|
iOS Developer Subscription Requirements |
|
Linux Information
Because various Linux distributions have different libraries installed by default, you may need to install additional libraries before your Xojo apps will run on Linux. At a minimum, Xojo requires these Linux libraries:
Always Required | Required for Desktop | Optional |
---|---|---|
glib 2.0 | GTK+ 2.20 |
libwebkitgtk-1.0.0 or libgtkhtml (HTMLViewer) Ubuntu install command: sudo apt-get install libwebkitgtk-1.0.0
|
glibc-2.11 (32-bit) glibc-2.14 (64-bit) |
libsoup 2.4 (Xojo.Net.HTTPSocket) | |
libstdc++.so.6.0.13 | GTK+ 2.32 for Picture.Open Horizontal and Vertical resolutions. | |
libicu 4.2+ |
|
If you're looking for a specific version and distribution, check out mirrors.kernel.org.
64-bit Configuration
For best results, create 64-bit Xojo apps for distribution on 64-bit Linux systems. If you have to distribute a 32-bit Xojo app on a Linux distribution, you need to ensure that the 32-bit libraries are installed. They are not installed by default, so you'll have to install them manually. Below are some commands that might be helpful.
Debian/Ubuntu/Mint | CentOS/Fedora/OpenSUSE |
---|---|
sudo apt-get install ia32-libs
sudo apt-get install ia32-libs-multiarch |
sudo yum install ia32-libs
sudo yum install ia32-libs-multiarch |
sudo dpkg --add-architecture i386
sudo apt-get update |
sudo yum install glib2.i686 libgcc.i686 libstdc++.i686
|
sudo apt-get install libicu52:i386
sudo apt-get install libicu52 sudo apt-get install libicu48:i386
|
sudo yum provides missinglibrarypathorname
sudo yum install packagenamewithlibrary
|
Ubuntu 14+: sudo dpkg --add-architecture i386
sudo apt-get update |
/usr/bin/yum -y install glib2.i686 libgcc.i686 libstdc++.i686
|
sudo apt-get install libgtk2.0-0:i386
sudo apt-get install libicu52:i386
|
yum install libicu.i686
|
If you are still having trouble identifying necessary libraries, the ldd command might help. You can run from Terminal in the Xojo directory to return a list of libraries required by Xojo and their status on the system:
International Components for Unicode (libicu)
Linux apps made with Xojo 2016 Release 3 or later include the libicu libraries as part of the app package (in the Libs folder). You do not need to install libicu separately.