Chebychev design of an FIR filter given a desired $H(\omega)$¶
A derivative work by Judson Wilson, 5/27/2014.
Adapted from the CVX example of the same name, by Almir Mutapcic, 2/2/2006.
Topic References:
- "Filter design" lecture notes (EE364) by S. Boyd
Introduction¶
This program designs an FIR filter, given a desired frequency response $H_\mbox{des}(\omega)$. The design is judged by the maximum absolute error (Chebychev norm). This is a convex problem (after sampling it can be formulated as an SOCP), which may be written in the form: \begin{array}{ll} \mbox{minimize} & \max |H(\omega) - H_\mbox{des}(\omega)| \quad \mbox{ for } 0 \le \omega \le \pi, \end{array} where the variable $H$ is the frequency response function, corresponding to an impulse response $h$.
Initialize problem data¶
In [1]:
import numpy as np
import cvxpy as cvx
#********************************************************************
# Problem specs.
#********************************************************************
# Number of FIR coefficients (including the zeroth one).
n = 20
# Rule-of-thumb frequency discretization (Cheney's Approx. Theory book).
m = 15*n
w = np.mat(np.linspace(0,np.pi,m)).T
#********************************************************************
# Construct the desired filter.
#********************************************************************
# Fractional delay.
D = 8.25 # Delay value.
Hdes = np.exp(-1j*D*w) # Desired frequency response.
# Gaussian filter with linear phase. (Uncomment lines below for this design.)
#var = 0.05
#Hdes = 1/(np.sqrt(2*np.pi*var)) * np.exp(-np.square(w-np.pi/2)/(2*var))
#Hdes = np.multiply(Hdes, np.exp(-1j*n/2*w))
Solve the minimax (Chebychev) design problem¶
In [2]:
# A is the matrix used to compute the frequency response
# from a vector of filter coefficients:
# A[w,:] = [1 exp(-j*w) exp(-j*2*w) ... exp(-j*n*w)]
A = np.exp( -1j * np.kron(np.mat(w), np.mat(np.arange(n))) )
# Presently CVXPY does not do complex-valued math, so the
# problem must be formatted into a real-valued representation.
# Split Hdes into a real part, and an imaginary part.
Hdes_r = np.real(Hdes)
Hdes_i = np.imag(Hdes)
# Split A into a real part, and an imaginary part.
A_R = np.real(A)
A_I = np.imag(A)
#
# Optimal Chebyshev filter formulation.
#
# h is the (real) FIR coefficient vector, which we are solving for.
h = cvx.Variable(n)
# The objective is:
# minimize max(|A*h-Hdes|)
# but modified into an equivelent form:
# minimize max( real(A*h-Hdes)^2 + imag(A*h-Hdes)^2 )
# such that all computation is done in real quantities only.
obj = cvx.Minimize(
cvx.max_entries(
cvx.square(A_R * h - Hdes_r) # Real part.
+ cvx.square(A_I * h - Hdes_i) ) ) # Imaginary part.
# Solve problem.
prob = cvx.Problem(obj)
prob.solve()
# Check if problem was successfully solved.
print 'Problem status:', prob.status
if prob.status != cvx.OPTIMAL:
raise Exception('CVXPY Error')
Result plots¶
In [4]:
import matplotlib.pyplot as plt
# Show plot inline in ipython.
%matplotlib inline
# Plot properties.
plt.rc('text', usetex=True)
plt.rc('font', family='serif')
font = {'family' : 'normal',
'weight' : 'normal',
'size' : 16}
plt.rc('font', **font)
# Plot the FIR impulse reponse.
plt.figure(figsize=(6, 6))
plt.stem(range(n),h.value)
plt.xlabel('n')
plt.ylabel('h(n)')
plt.title('FIR filter impulse response')
# Plot the frequency response.
H = np.exp(-1j * np.kron(w, np.mat(np.arange(n)))) * h.value
plt.figure(figsize=(6, 6))
# Magnitude
plt.plot(np.array(w), 20 * np.log10(np.array(np.abs(H))),
label='optimized')
plt.plot(np.array(w), 20 * np.log10(np.array(np.abs(Hdes))),'--',
label='desired')
plt.xlabel(r'$\omega$')
plt.ylabel(r'$|H(\omega)|$ in dB')
plt.title('FIR filter freq. response magnitude')
plt.xlim(0, np.pi)
plt.ylim(-30, 10)
plt.legend(loc='lower right')
# Phase
plt.figure(figsize=(6, 6))
plt.plot(np.array(w), np.angle(np.array(H)))
plt.xlim(0, np.pi)
plt.ylim(-np.pi, np.pi)
plt.xlabel(r'$\omega$')
plt.ylabel(r'$\angle H(\omega)$')
plt.title('FIR filter freq. response angle')
Out[4]:
