#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
import sys
if sys.version > '3':
basestring = str
from pyspark import since, keyword_only, SparkContext
from pyspark.rdd import ignore_unicode_prefix
from pyspark.ml.linalg import _convert_to_vector
from pyspark.ml.param.shared import *
from pyspark.ml.util import JavaMLReadable, JavaMLWritable
from pyspark.ml.wrapper import JavaEstimator, JavaModel, JavaParams, JavaTransformer, _jvm
from pyspark.ml.common import inherit_doc
__all__ = ['Binarizer',
'BucketedRandomProjectionLSH', 'BucketedRandomProjectionLSHModel',
'Bucketizer',
'ChiSqSelector', 'ChiSqSelectorModel',
'CountVectorizer', 'CountVectorizerModel',
'DCT',
'ElementwiseProduct',
'FeatureHasher',
'HashingTF',
'IDF', 'IDFModel',
'Imputer', 'ImputerModel',
'IndexToString',
'MaxAbsScaler', 'MaxAbsScalerModel',
'MinHashLSH', 'MinHashLSHModel',
'MinMaxScaler', 'MinMaxScalerModel',
'NGram',
'Normalizer',
'OneHotEncoder', 'OneHotEncoderModel',
'PCA', 'PCAModel',
'PolynomialExpansion',
'QuantileDiscretizer',
'RegexTokenizer',
'RFormula', 'RFormulaModel',
'SQLTransformer',
'StandardScaler', 'StandardScalerModel',
'StopWordsRemover',
'StringIndexer', 'StringIndexerModel',
'Tokenizer',
'VectorAssembler',
'VectorIndexer', 'VectorIndexerModel',
'VectorSizeHint',
'VectorSlicer',
'Word2Vec', 'Word2VecModel']
[docs]@inherit_doc
class Binarizer(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
Binarize a column of continuous features given a threshold.
>>> df = spark.createDataFrame([(0.5,)], ["values"])
>>> binarizer = Binarizer(threshold=1.0, inputCol="values", outputCol="features")
>>> binarizer.transform(df).head().features
0.0
>>> binarizer.setParams(outputCol="freqs").transform(df).head().freqs
0.0
>>> params = {binarizer.threshold: -0.5, binarizer.outputCol: "vector"}
>>> binarizer.transform(df, params).head().vector
1.0
>>> binarizerPath = temp_path + "/binarizer"
>>> binarizer.save(binarizerPath)
>>> loadedBinarizer = Binarizer.load(binarizerPath)
>>> loadedBinarizer.getThreshold() == binarizer.getThreshold()
True
.. versionadded:: 1.4.0
"""
threshold = Param(Params._dummy(), "threshold",
"threshold in binary classification prediction, in range [0, 1]",
typeConverter=TypeConverters.toFloat)
@keyword_only
def __init__(self, threshold=0.0, inputCol=None, outputCol=None):
"""
__init__(self, threshold=0.0, inputCol=None, outputCol=None)
"""
super(Binarizer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.Binarizer", self.uid)
self._setDefault(threshold=0.0)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, threshold=0.0, inputCol=None, outputCol=None):
"""
setParams(self, threshold=0.0, inputCol=None, outputCol=None)
Sets params for this Binarizer.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.4.0")
def setThreshold(self, value):
"""
Sets the value of :py:attr:`threshold`.
"""
return self._set(threshold=value)
[docs] @since("1.4.0")
def getThreshold(self):
"""
Gets the value of threshold or its default value.
"""
return self.getOrDefault(self.threshold)
class LSHParams(Params):
"""
Mixin for Locality Sensitive Hashing (LSH) algorithm parameters.
"""
numHashTables = Param(Params._dummy(), "numHashTables", "number of hash tables, where " +
"increasing number of hash tables lowers the false negative rate, " +
"and decreasing it improves the running performance.",
typeConverter=TypeConverters.toInt)
def __init__(self):
super(LSHParams, self).__init__()
def setNumHashTables(self, value):
"""
Sets the value of :py:attr:`numHashTables`.
"""
return self._set(numHashTables=value)
def getNumHashTables(self):
"""
Gets the value of numHashTables or its default value.
"""
return self.getOrDefault(self.numHashTables)
class LSHModel(JavaModel):
"""
Mixin for Locality Sensitive Hashing (LSH) models.
"""
def approxNearestNeighbors(self, dataset, key, numNearestNeighbors, distCol="distCol"):
"""
Given a large dataset and an item, approximately find at most k items which have the
closest distance to the item. If the :py:attr:`outputCol` is missing, the method will
transform the data; if the :py:attr:`outputCol` exists, it will use that. This allows
caching of the transformed data when necessary.
.. note:: This method is experimental and will likely change behavior in the next release.
:param dataset: The dataset to search for nearest neighbors of the key.
:param key: Feature vector representing the item to search for.
:param numNearestNeighbors: The maximum number of nearest neighbors.
:param distCol: Output column for storing the distance between each result row and the key.
Use "distCol" as default value if it's not specified.
:return: A dataset containing at most k items closest to the key. A column "distCol" is
added to show the distance between each row and the key.
"""
return self._call_java("approxNearestNeighbors", dataset, key, numNearestNeighbors,
distCol)
def approxSimilarityJoin(self, datasetA, datasetB, threshold, distCol="distCol"):
"""
Join two datasets to approximately find all pairs of rows whose distance are smaller than
the threshold. If the :py:attr:`outputCol` is missing, the method will transform the data;
if the :py:attr:`outputCol` exists, it will use that. This allows caching of the
transformed data when necessary.
:param datasetA: One of the datasets to join.
:param datasetB: Another dataset to join.
:param threshold: The threshold for the distance of row pairs.
:param distCol: Output column for storing the distance between each pair of rows. Use
"distCol" as default value if it's not specified.
:return: A joined dataset containing pairs of rows. The original rows are in columns
"datasetA" and "datasetB", and a column "distCol" is added to show the distance
between each pair.
"""
threshold = TypeConverters.toFloat(threshold)
return self._call_java("approxSimilarityJoin", datasetA, datasetB, threshold, distCol)
[docs]@inherit_doc
class BucketedRandomProjectionLSH(JavaEstimator, LSHParams, HasInputCol, HasOutputCol, HasSeed,
JavaMLReadable, JavaMLWritable):
"""
.. note:: Experimental
LSH class for Euclidean distance metrics.
The input is dense or sparse vectors, each of which represents a point in the Euclidean
distance space. The output will be vectors of configurable dimension. Hash values in the same
dimension are calculated by the same hash function.
.. seealso:: `Stable Distributions
<https://en.wikipedia.org/wiki/Locality-sensitive_hashing#Stable_distributions>`_
.. seealso:: `Hashing for Similarity Search: A Survey <https://arxiv.org/abs/1408.2927>`_
>>> from pyspark.ml.linalg import Vectors
>>> from pyspark.sql.functions import col
>>> data = [(0, Vectors.dense([-1.0, -1.0 ]),),
... (1, Vectors.dense([-1.0, 1.0 ]),),
... (2, Vectors.dense([1.0, -1.0 ]),),
... (3, Vectors.dense([1.0, 1.0]),)]
>>> df = spark.createDataFrame(data, ["id", "features"])
>>> brp = BucketedRandomProjectionLSH(inputCol="features", outputCol="hashes",
... seed=12345, bucketLength=1.0)
>>> model = brp.fit(df)
>>> model.transform(df).head()
Row(id=0, features=DenseVector([-1.0, -1.0]), hashes=[DenseVector([-1.0])])
>>> data2 = [(4, Vectors.dense([2.0, 2.0 ]),),
... (5, Vectors.dense([2.0, 3.0 ]),),
... (6, Vectors.dense([3.0, 2.0 ]),),
... (7, Vectors.dense([3.0, 3.0]),)]
>>> df2 = spark.createDataFrame(data2, ["id", "features"])
>>> model.approxNearestNeighbors(df2, Vectors.dense([1.0, 2.0]), 1).collect()
[Row(id=4, features=DenseVector([2.0, 2.0]), hashes=[DenseVector([1.0])], distCol=1.0)]
>>> model.approxSimilarityJoin(df, df2, 3.0, distCol="EuclideanDistance").select(
... col("datasetA.id").alias("idA"),
... col("datasetB.id").alias("idB"),
... col("EuclideanDistance")).show()
+---+---+-----------------+
|idA|idB|EuclideanDistance|
+---+---+-----------------+
| 3| 6| 2.23606797749979|
+---+---+-----------------+
...
>>> model.approxSimilarityJoin(df, df2, 3, distCol="EuclideanDistance").select(
... col("datasetA.id").alias("idA"),
... col("datasetB.id").alias("idB"),
... col("EuclideanDistance")).show()
+---+---+-----------------+
|idA|idB|EuclideanDistance|
+---+---+-----------------+
| 3| 6| 2.23606797749979|
+---+---+-----------------+
...
>>> brpPath = temp_path + "/brp"
>>> brp.save(brpPath)
>>> brp2 = BucketedRandomProjectionLSH.load(brpPath)
>>> brp2.getBucketLength() == brp.getBucketLength()
True
>>> modelPath = temp_path + "/brp-model"
>>> model.save(modelPath)
>>> model2 = BucketedRandomProjectionLSHModel.load(modelPath)
>>> model.transform(df).head().hashes == model2.transform(df).head().hashes
True
.. versionadded:: 2.2.0
"""
bucketLength = Param(Params._dummy(), "bucketLength", "the length of each hash bucket, " +
"a larger bucket lowers the false negative rate.",
typeConverter=TypeConverters.toFloat)
@keyword_only
def __init__(self, inputCol=None, outputCol=None, seed=None, numHashTables=1,
bucketLength=None):
"""
__init__(self, inputCol=None, outputCol=None, seed=None, numHashTables=1, \
bucketLength=None)
"""
super(BucketedRandomProjectionLSH, self).__init__()
self._java_obj = \
self._new_java_obj("org.apache.spark.ml.feature.BucketedRandomProjectionLSH", self.uid)
self._setDefault(numHashTables=1)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("2.2.0")
def setParams(self, inputCol=None, outputCol=None, seed=None, numHashTables=1,
bucketLength=None):
"""
setParams(self, inputCol=None, outputCol=None, seed=None, numHashTables=1, \
bucketLength=None)
Sets params for this BucketedRandomProjectionLSH.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("2.2.0")
def setBucketLength(self, value):
"""
Sets the value of :py:attr:`bucketLength`.
"""
return self._set(bucketLength=value)
[docs] @since("2.2.0")
def getBucketLength(self):
"""
Gets the value of bucketLength or its default value.
"""
return self.getOrDefault(self.bucketLength)
def _create_model(self, java_model):
return BucketedRandomProjectionLSHModel(java_model)
[docs]class BucketedRandomProjectionLSHModel(LSHModel, JavaMLReadable, JavaMLWritable):
r"""
.. note:: Experimental
Model fitted by :py:class:`BucketedRandomProjectionLSH`, where multiple random vectors are
stored. The vectors are normalized to be unit vectors and each vector is used in a hash
function: :math:`h_i(x) = floor(r_i \cdot x / bucketLength)` where :math:`r_i` is the
i-th random unit vector. The number of buckets will be `(max L2 norm of input vectors) /
bucketLength`.
.. versionadded:: 2.2.0
"""
[docs]@inherit_doc
class Bucketizer(JavaTransformer, HasInputCol, HasOutputCol, HasHandleInvalid,
JavaMLReadable, JavaMLWritable):
"""
Maps a column of continuous features to a column of feature buckets.
>>> values = [(0.1,), (0.4,), (1.2,), (1.5,), (float("nan"),), (float("nan"),)]
>>> df = spark.createDataFrame(values, ["values"])
>>> bucketizer = Bucketizer(splits=[-float("inf"), 0.5, 1.4, float("inf")],
... inputCol="values", outputCol="buckets")
>>> bucketed = bucketizer.setHandleInvalid("keep").transform(df).collect()
>>> len(bucketed)
6
>>> bucketed[0].buckets
0.0
>>> bucketed[1].buckets
0.0
>>> bucketed[2].buckets
1.0
>>> bucketed[3].buckets
2.0
>>> bucketizer.setParams(outputCol="b").transform(df).head().b
0.0
>>> bucketizerPath = temp_path + "/bucketizer"
>>> bucketizer.save(bucketizerPath)
>>> loadedBucketizer = Bucketizer.load(bucketizerPath)
>>> loadedBucketizer.getSplits() == bucketizer.getSplits()
True
>>> bucketed = bucketizer.setHandleInvalid("skip").transform(df).collect()
>>> len(bucketed)
4
.. versionadded:: 1.4.0
"""
splits = \
Param(Params._dummy(), "splits",
"Split points for mapping continuous features into buckets. With n+1 splits, " +
"there are n buckets. A bucket defined by splits x,y holds values in the " +
"range [x,y) except the last bucket, which also includes y. The splits " +
"should be of length >= 3 and strictly increasing. Values at -inf, inf must be " +
"explicitly provided to cover all Double values; otherwise, values outside the " +
"splits specified will be treated as errors.",
typeConverter=TypeConverters.toListFloat)
handleInvalid = Param(Params._dummy(), "handleInvalid", "how to handle invalid entries "
"containing NaN values. Values outside the splits will always be treated "
"as errors. Options are 'skip' (filter out rows with invalid values), " +
"'error' (throw an error), or 'keep' (keep invalid values in a special " +
"additional bucket).",
typeConverter=TypeConverters.toString)
@keyword_only
def __init__(self, splits=None, inputCol=None, outputCol=None, handleInvalid="error"):
"""
__init__(self, splits=None, inputCol=None, outputCol=None, handleInvalid="error")
"""
super(Bucketizer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.Bucketizer", self.uid)
self._setDefault(handleInvalid="error")
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, splits=None, inputCol=None, outputCol=None, handleInvalid="error"):
"""
setParams(self, splits=None, inputCol=None, outputCol=None, handleInvalid="error")
Sets params for this Bucketizer.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.4.0")
def setSplits(self, value):
"""
Sets the value of :py:attr:`splits`.
"""
return self._set(splits=value)
[docs] @since("1.4.0")
def getSplits(self):
"""
Gets the value of threshold or its default value.
"""
return self.getOrDefault(self.splits)
class _CountVectorizerParams(JavaParams, HasInputCol, HasOutputCol):
"""
Params for :py:attr:`CountVectorizer` and :py:attr:`CountVectorizerModel`.
"""
minTF = Param(
Params._dummy(), "minTF", "Filter to ignore rare words in" +
" a document. For each document, terms with frequency/count less than the given" +
" threshold are ignored. If this is an integer >= 1, then this specifies a count (of" +
" times the term must appear in the document); if this is a double in [0,1), then this " +
"specifies a fraction (out of the document's token count). Note that the parameter is " +
"only used in transform of CountVectorizerModel and does not affect fitting. Default 1.0",
typeConverter=TypeConverters.toFloat)
minDF = Param(
Params._dummy(), "minDF", "Specifies the minimum number of" +
" different documents a term must appear in to be included in the vocabulary." +
" If this is an integer >= 1, this specifies the number of documents the term must" +
" appear in; if this is a double in [0,1), then this specifies the fraction of documents." +
" Default 1.0", typeConverter=TypeConverters.toFloat)
maxDF = Param(
Params._dummy(), "maxDF", "Specifies the maximum number of" +
" different documents a term could appear in to be included in the vocabulary." +
" A term that appears more than the threshold will be ignored. If this is an" +
" integer >= 1, this specifies the maximum number of documents the term could appear in;" +
" if this is a double in [0,1), then this specifies the maximum" +
" fraction of documents the term could appear in." +
" Default (2^63) - 1", typeConverter=TypeConverters.toFloat)
vocabSize = Param(
Params._dummy(), "vocabSize", "max size of the vocabulary. Default 1 << 18.",
typeConverter=TypeConverters.toInt)
binary = Param(
Params._dummy(), "binary", "Binary toggle to control the output vector values." +
" If True, all nonzero counts (after minTF filter applied) are set to 1. This is useful" +
" for discrete probabilistic models that model binary events rather than integer counts." +
" Default False", typeConverter=TypeConverters.toBoolean)
def __init__(self, *args):
super(_CountVectorizerParams, self).__init__(*args)
self._setDefault(minTF=1.0, minDF=1.0, maxDF=2 ** 63 - 1, vocabSize=1 << 18, binary=False)
@since("1.6.0")
def getMinTF(self):
"""
Gets the value of minTF or its default value.
"""
return self.getOrDefault(self.minTF)
@since("1.6.0")
def getMinDF(self):
"""
Gets the value of minDF or its default value.
"""
return self.getOrDefault(self.minDF)
@since("2.4.0")
def getMaxDF(self):
"""
Gets the value of maxDF or its default value.
"""
return self.getOrDefault(self.maxDF)
@since("1.6.0")
def getVocabSize(self):
"""
Gets the value of vocabSize or its default value.
"""
return self.getOrDefault(self.vocabSize)
@since("2.0.0")
def getBinary(self):
"""
Gets the value of binary or its default value.
"""
return self.getOrDefault(self.binary)
[docs]@inherit_doc
class CountVectorizer(JavaEstimator, _CountVectorizerParams, JavaMLReadable, JavaMLWritable):
"""
Extracts a vocabulary from document collections and generates a :py:attr:`CountVectorizerModel`.
>>> df = spark.createDataFrame(
... [(0, ["a", "b", "c"]), (1, ["a", "b", "b", "c", "a"])],
... ["label", "raw"])
>>> cv = CountVectorizer(inputCol="raw", outputCol="vectors")
>>> model = cv.fit(df)
>>> model.transform(df).show(truncate=False)
+-----+---------------+-------------------------+
|label|raw |vectors |
+-----+---------------+-------------------------+
|0 |[a, b, c] |(3,[0,1,2],[1.0,1.0,1.0])|
|1 |[a, b, b, c, a]|(3,[0,1,2],[2.0,2.0,1.0])|
+-----+---------------+-------------------------+
...
>>> sorted(model.vocabulary) == ['a', 'b', 'c']
True
>>> countVectorizerPath = temp_path + "/count-vectorizer"
>>> cv.save(countVectorizerPath)
>>> loadedCv = CountVectorizer.load(countVectorizerPath)
>>> loadedCv.getMinDF() == cv.getMinDF()
True
>>> loadedCv.getMinTF() == cv.getMinTF()
True
>>> loadedCv.getVocabSize() == cv.getVocabSize()
True
>>> modelPath = temp_path + "/count-vectorizer-model"
>>> model.save(modelPath)
>>> loadedModel = CountVectorizerModel.load(modelPath)
>>> loadedModel.vocabulary == model.vocabulary
True
>>> fromVocabModel = CountVectorizerModel.from_vocabulary(["a", "b", "c"],
... inputCol="raw", outputCol="vectors")
>>> fromVocabModel.transform(df).show(truncate=False)
+-----+---------------+-------------------------+
|label|raw |vectors |
+-----+---------------+-------------------------+
|0 |[a, b, c] |(3,[0,1,2],[1.0,1.0,1.0])|
|1 |[a, b, b, c, a]|(3,[0,1,2],[2.0,2.0,1.0])|
+-----+---------------+-------------------------+
...
.. versionadded:: 1.6.0
"""
@keyword_only
def __init__(self, minTF=1.0, minDF=1.0, maxDF=2 ** 63 - 1, vocabSize=1 << 18, binary=False,
inputCol=None, outputCol=None):
"""
__init__(self, minTF=1.0, minDF=1.0, maxDF=2 ** 63 - 1, vocabSize=1 << 18, binary=False,\
inputCol=None,outputCol=None)
"""
super(CountVectorizer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.CountVectorizer",
self.uid)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.6.0")
def setParams(self, minTF=1.0, minDF=1.0, maxDF=2 ** 63 - 1, vocabSize=1 << 18, binary=False,
inputCol=None, outputCol=None):
"""
setParams(self, minTF=1.0, minDF=1.0, maxDF=2 ** 63 - 1, vocabSize=1 << 18, binary=False,\
inputCol=None, outputCol=None)
Set the params for the CountVectorizer
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.6.0")
def setMinTF(self, value):
"""
Sets the value of :py:attr:`minTF`.
"""
return self._set(minTF=value)
[docs] @since("1.6.0")
def setMinDF(self, value):
"""
Sets the value of :py:attr:`minDF`.
"""
return self._set(minDF=value)
[docs] @since("2.4.0")
def setMaxDF(self, value):
"""
Sets the value of :py:attr:`maxDF`.
"""
return self._set(maxDF=value)
[docs] @since("1.6.0")
def setVocabSize(self, value):
"""
Sets the value of :py:attr:`vocabSize`.
"""
return self._set(vocabSize=value)
[docs] @since("2.0.0")
def setBinary(self, value):
"""
Sets the value of :py:attr:`binary`.
"""
return self._set(binary=value)
def _create_model(self, java_model):
return CountVectorizerModel(java_model)
[docs]@inherit_doc
class CountVectorizerModel(JavaModel, _CountVectorizerParams, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`CountVectorizer`.
.. versionadded:: 1.6.0
"""
[docs] @classmethod
@since("2.4.0")
def from_vocabulary(cls, vocabulary, inputCol, outputCol=None, minTF=None, binary=None):
"""
Construct the model directly from a vocabulary list of strings,
requires an active SparkContext.
"""
sc = SparkContext._active_spark_context
java_class = sc._gateway.jvm.java.lang.String
jvocab = CountVectorizerModel._new_java_array(vocabulary, java_class)
model = CountVectorizerModel._create_from_java_class(
"org.apache.spark.ml.feature.CountVectorizerModel", jvocab)
model.setInputCol(inputCol)
if outputCol is not None:
model.setOutputCol(outputCol)
if minTF is not None:
model.setMinTF(minTF)
if binary is not None:
model.setBinary(binary)
model._set(vocabSize=len(vocabulary))
return model
@property
@since("1.6.0")
def vocabulary(self):
"""
An array of terms in the vocabulary.
"""
return self._call_java("vocabulary")
[docs] @since("2.4.0")
def setMinTF(self, value):
"""
Sets the value of :py:attr:`minTF`.
"""
return self._set(minTF=value)
[docs] @since("2.4.0")
def setBinary(self, value):
"""
Sets the value of :py:attr:`binary`.
"""
return self._set(binary=value)
[docs]@inherit_doc
class DCT(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
A feature transformer that takes the 1D discrete cosine transform
of a real vector. No zero padding is performed on the input vector.
It returns a real vector of the same length representing the DCT.
The return vector is scaled such that the transform matrix is
unitary (aka scaled DCT-II).
.. seealso:: `More information on Wikipedia
<https://en.wikipedia.org/wiki/Discrete_cosine_transform#DCT-II Wikipedia>`_.
>>> from pyspark.ml.linalg import Vectors
>>> df1 = spark.createDataFrame([(Vectors.dense([5.0, 8.0, 6.0]),)], ["vec"])
>>> dct = DCT(inverse=False, inputCol="vec", outputCol="resultVec")
>>> df2 = dct.transform(df1)
>>> df2.head().resultVec
DenseVector([10.969..., -0.707..., -2.041...])
>>> df3 = DCT(inverse=True, inputCol="resultVec", outputCol="origVec").transform(df2)
>>> df3.head().origVec
DenseVector([5.0, 8.0, 6.0])
>>> dctPath = temp_path + "/dct"
>>> dct.save(dctPath)
>>> loadedDtc = DCT.load(dctPath)
>>> loadedDtc.getInverse()
False
.. versionadded:: 1.6.0
"""
inverse = Param(Params._dummy(), "inverse", "Set transformer to perform inverse DCT, " +
"default False.", typeConverter=TypeConverters.toBoolean)
@keyword_only
def __init__(self, inverse=False, inputCol=None, outputCol=None):
"""
__init__(self, inverse=False, inputCol=None, outputCol=None)
"""
super(DCT, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.DCT", self.uid)
self._setDefault(inverse=False)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.6.0")
def setParams(self, inverse=False, inputCol=None, outputCol=None):
"""
setParams(self, inverse=False, inputCol=None, outputCol=None)
Sets params for this DCT.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.6.0")
def setInverse(self, value):
"""
Sets the value of :py:attr:`inverse`.
"""
return self._set(inverse=value)
[docs] @since("1.6.0")
def getInverse(self):
"""
Gets the value of inverse or its default value.
"""
return self.getOrDefault(self.inverse)
[docs]@inherit_doc
class ElementwiseProduct(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable,
JavaMLWritable):
"""
Outputs the Hadamard product (i.e., the element-wise product) of each input vector
with a provided "weight" vector. In other words, it scales each column of the dataset
by a scalar multiplier.
>>> from pyspark.ml.linalg import Vectors
>>> df = spark.createDataFrame([(Vectors.dense([2.0, 1.0, 3.0]),)], ["values"])
>>> ep = ElementwiseProduct(scalingVec=Vectors.dense([1.0, 2.0, 3.0]),
... inputCol="values", outputCol="eprod")
>>> ep.transform(df).head().eprod
DenseVector([2.0, 2.0, 9.0])
>>> ep.setParams(scalingVec=Vectors.dense([2.0, 3.0, 5.0])).transform(df).head().eprod
DenseVector([4.0, 3.0, 15.0])
>>> elementwiseProductPath = temp_path + "/elementwise-product"
>>> ep.save(elementwiseProductPath)
>>> loadedEp = ElementwiseProduct.load(elementwiseProductPath)
>>> loadedEp.getScalingVec() == ep.getScalingVec()
True
.. versionadded:: 1.5.0
"""
scalingVec = Param(Params._dummy(), "scalingVec", "Vector for hadamard product.",
typeConverter=TypeConverters.toVector)
@keyword_only
def __init__(self, scalingVec=None, inputCol=None, outputCol=None):
"""
__init__(self, scalingVec=None, inputCol=None, outputCol=None)
"""
super(ElementwiseProduct, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.ElementwiseProduct",
self.uid)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.5.0")
def setParams(self, scalingVec=None, inputCol=None, outputCol=None):
"""
setParams(self, scalingVec=None, inputCol=None, outputCol=None)
Sets params for this ElementwiseProduct.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("2.0.0")
def setScalingVec(self, value):
"""
Sets the value of :py:attr:`scalingVec`.
"""
return self._set(scalingVec=value)
[docs] @since("2.0.0")
def getScalingVec(self):
"""
Gets the value of scalingVec or its default value.
"""
return self.getOrDefault(self.scalingVec)
[docs]@inherit_doc
class FeatureHasher(JavaTransformer, HasInputCols, HasOutputCol, HasNumFeatures, JavaMLReadable,
JavaMLWritable):
"""
.. note:: Experimental
Feature hashing projects a set of categorical or numerical features into a feature vector of
specified dimension (typically substantially smaller than that of the original feature
space). This is done using the hashing trick (https://en.wikipedia.org/wiki/Feature_hashing)
to map features to indices in the feature vector.
The FeatureHasher transformer operates on multiple columns. Each column may contain either
numeric or categorical features. Behavior and handling of column data types is as follows:
* Numeric columns:
For numeric features, the hash value of the column name is used to map the
feature value to its index in the feature vector. By default, numeric features
are not treated as categorical (even when they are integers). To treat them
as categorical, specify the relevant columns in `categoricalCols`.
* String columns:
For categorical features, the hash value of the string "column_name=value"
is used to map to the vector index, with an indicator value of `1.0`.
Thus, categorical features are "one-hot" encoded
(similarly to using :py:class:`OneHotEncoder` with `dropLast=false`).
* Boolean columns:
Boolean values are treated in the same way as string columns. That is,
boolean features are represented as "column_name=true" or "column_name=false",
with an indicator value of `1.0`.
Null (missing) values are ignored (implicitly zero in the resulting feature vector).
Since a simple modulo is used to transform the hash function to a vector index,
it is advisable to use a power of two as the `numFeatures` parameter;
otherwise the features will not be mapped evenly to the vector indices.
>>> data = [(2.0, True, "1", "foo"), (3.0, False, "2", "bar")]
>>> cols = ["real", "bool", "stringNum", "string"]
>>> df = spark.createDataFrame(data, cols)
>>> hasher = FeatureHasher(inputCols=cols, outputCol="features")
>>> hasher.transform(df).head().features
SparseVector(262144, {174475: 2.0, 247670: 1.0, 257907: 1.0, 262126: 1.0})
>>> hasher.setCategoricalCols(["real"]).transform(df).head().features
SparseVector(262144, {171257: 1.0, 247670: 1.0, 257907: 1.0, 262126: 1.0})
>>> hasherPath = temp_path + "/hasher"
>>> hasher.save(hasherPath)
>>> loadedHasher = FeatureHasher.load(hasherPath)
>>> loadedHasher.getNumFeatures() == hasher.getNumFeatures()
True
>>> loadedHasher.transform(df).head().features == hasher.transform(df).head().features
True
.. versionadded:: 2.3.0
"""
categoricalCols = Param(Params._dummy(), "categoricalCols",
"numeric columns to treat as categorical",
typeConverter=TypeConverters.toListString)
@keyword_only
def __init__(self, numFeatures=1 << 18, inputCols=None, outputCol=None, categoricalCols=None):
"""
__init__(self, numFeatures=1 << 18, inputCols=None, outputCol=None, categoricalCols=None)
"""
super(FeatureHasher, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.FeatureHasher", self.uid)
self._setDefault(numFeatures=1 << 18)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("2.3.0")
def setParams(self, numFeatures=1 << 18, inputCols=None, outputCol=None, categoricalCols=None):
"""
setParams(self, numFeatures=1 << 18, inputCols=None, outputCol=None, categoricalCols=None)
Sets params for this FeatureHasher.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("2.3.0")
def setCategoricalCols(self, value):
"""
Sets the value of :py:attr:`categoricalCols`.
"""
return self._set(categoricalCols=value)
[docs] @since("2.3.0")
def getCategoricalCols(self):
"""
Gets the value of binary or its default value.
"""
return self.getOrDefault(self.categoricalCols)
[docs]@inherit_doc
class HashingTF(JavaTransformer, HasInputCol, HasOutputCol, HasNumFeatures, JavaMLReadable,
JavaMLWritable):
"""
Maps a sequence of terms to their term frequencies using the hashing trick.
Currently we use Austin Appleby's MurmurHash 3 algorithm (MurmurHash3_x86_32)
to calculate the hash code value for the term object.
Since a simple modulo is used to transform the hash function to a column index,
it is advisable to use a power of two as the numFeatures parameter;
otherwise the features will not be mapped evenly to the columns.
>>> df = spark.createDataFrame([(["a", "b", "c"],)], ["words"])
>>> hashingTF = HashingTF(numFeatures=10, inputCol="words", outputCol="features")
>>> hashingTF.transform(df).head().features
SparseVector(10, {0: 1.0, 1: 1.0, 2: 1.0})
>>> hashingTF.setParams(outputCol="freqs").transform(df).head().freqs
SparseVector(10, {0: 1.0, 1: 1.0, 2: 1.0})
>>> params = {hashingTF.numFeatures: 5, hashingTF.outputCol: "vector"}
>>> hashingTF.transform(df, params).head().vector
SparseVector(5, {0: 1.0, 1: 1.0, 2: 1.0})
>>> hashingTFPath = temp_path + "/hashing-tf"
>>> hashingTF.save(hashingTFPath)
>>> loadedHashingTF = HashingTF.load(hashingTFPath)
>>> loadedHashingTF.getNumFeatures() == hashingTF.getNumFeatures()
True
.. versionadded:: 1.3.0
"""
binary = Param(Params._dummy(), "binary", "If True, all non zero counts are set to 1. " +
"This is useful for discrete probabilistic models that model binary events " +
"rather than integer counts. Default False.",
typeConverter=TypeConverters.toBoolean)
@keyword_only
def __init__(self, numFeatures=1 << 18, binary=False, inputCol=None, outputCol=None):
"""
__init__(self, numFeatures=1 << 18, binary=False, inputCol=None, outputCol=None)
"""
super(HashingTF, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.HashingTF", self.uid)
self._setDefault(numFeatures=1 << 18, binary=False)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.3.0")
def setParams(self, numFeatures=1 << 18, binary=False, inputCol=None, outputCol=None):
"""
setParams(self, numFeatures=1 << 18, binary=False, inputCol=None, outputCol=None)
Sets params for this HashingTF.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("2.0.0")
def setBinary(self, value):
"""
Sets the value of :py:attr:`binary`.
"""
return self._set(binary=value)
[docs] @since("2.0.0")
def getBinary(self):
"""
Gets the value of binary or its default value.
"""
return self.getOrDefault(self.binary)
[docs]@inherit_doc
class IDF(JavaEstimator, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
Compute the Inverse Document Frequency (IDF) given a collection of documents.
>>> from pyspark.ml.linalg import DenseVector
>>> df = spark.createDataFrame([(DenseVector([1.0, 2.0]),),
... (DenseVector([0.0, 1.0]),), (DenseVector([3.0, 0.2]),)], ["tf"])
>>> idf = IDF(minDocFreq=3, inputCol="tf", outputCol="idf")
>>> model = idf.fit(df)
>>> model.idf
DenseVector([0.0, 0.0])
>>> model.transform(df).head().idf
DenseVector([0.0, 0.0])
>>> idf.setParams(outputCol="freqs").fit(df).transform(df).collect()[1].freqs
DenseVector([0.0, 0.0])
>>> params = {idf.minDocFreq: 1, idf.outputCol: "vector"}
>>> idf.fit(df, params).transform(df).head().vector
DenseVector([0.2877, 0.0])
>>> idfPath = temp_path + "/idf"
>>> idf.save(idfPath)
>>> loadedIdf = IDF.load(idfPath)
>>> loadedIdf.getMinDocFreq() == idf.getMinDocFreq()
True
>>> modelPath = temp_path + "/idf-model"
>>> model.save(modelPath)
>>> loadedModel = IDFModel.load(modelPath)
>>> loadedModel.transform(df).head().idf == model.transform(df).head().idf
True
.. versionadded:: 1.4.0
"""
minDocFreq = Param(Params._dummy(), "minDocFreq",
"minimum number of documents in which a term should appear for filtering",
typeConverter=TypeConverters.toInt)
@keyword_only
def __init__(self, minDocFreq=0, inputCol=None, outputCol=None):
"""
__init__(self, minDocFreq=0, inputCol=None, outputCol=None)
"""
super(IDF, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.IDF", self.uid)
self._setDefault(minDocFreq=0)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, minDocFreq=0, inputCol=None, outputCol=None):
"""
setParams(self, minDocFreq=0, inputCol=None, outputCol=None)
Sets params for this IDF.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.4.0")
def setMinDocFreq(self, value):
"""
Sets the value of :py:attr:`minDocFreq`.
"""
return self._set(minDocFreq=value)
[docs] @since("1.4.0")
def getMinDocFreq(self):
"""
Gets the value of minDocFreq or its default value.
"""
return self.getOrDefault(self.minDocFreq)
def _create_model(self, java_model):
return IDFModel(java_model)
[docs]class IDFModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`IDF`.
.. versionadded:: 1.4.0
"""
@property
@since("2.0.0")
def idf(self):
"""
Returns the IDF vector.
"""
return self._call_java("idf")
[docs]@inherit_doc
class Imputer(JavaEstimator, HasInputCols, JavaMLReadable, JavaMLWritable):
"""
.. note:: Experimental
Imputation estimator for completing missing values, either using the mean or the median
of the columns in which the missing values are located. The input columns should be of
DoubleType or FloatType. Currently Imputer does not support categorical features and
possibly creates incorrect values for a categorical feature.
Note that the mean/median value is computed after filtering out missing values.
All Null values in the input columns are treated as missing, and so are also imputed. For
computing median, :py:meth:`pyspark.sql.DataFrame.approxQuantile` is used with a
relative error of `0.001`.
>>> df = spark.createDataFrame([(1.0, float("nan")), (2.0, float("nan")), (float("nan"), 3.0),
... (4.0, 4.0), (5.0, 5.0)], ["a", "b"])
>>> imputer = Imputer(inputCols=["a", "b"], outputCols=["out_a", "out_b"])
>>> model = imputer.fit(df)
>>> model.surrogateDF.show()
+---+---+
| a| b|
+---+---+
|3.0|4.0|
+---+---+
...
>>> model.transform(df).show()
+---+---+-----+-----+
| a| b|out_a|out_b|
+---+---+-----+-----+
|1.0|NaN| 1.0| 4.0|
|2.0|NaN| 2.0| 4.0|
|NaN|3.0| 3.0| 3.0|
...
>>> imputer.setStrategy("median").setMissingValue(1.0).fit(df).transform(df).show()
+---+---+-----+-----+
| a| b|out_a|out_b|
+---+---+-----+-----+
|1.0|NaN| 4.0| NaN|
...
>>> imputerPath = temp_path + "/imputer"
>>> imputer.save(imputerPath)
>>> loadedImputer = Imputer.load(imputerPath)
>>> loadedImputer.getStrategy() == imputer.getStrategy()
True
>>> loadedImputer.getMissingValue()
1.0
>>> modelPath = temp_path + "/imputer-model"
>>> model.save(modelPath)
>>> loadedModel = ImputerModel.load(modelPath)
>>> loadedModel.transform(df).head().out_a == model.transform(df).head().out_a
True
.. versionadded:: 2.2.0
"""
outputCols = Param(Params._dummy(), "outputCols",
"output column names.", typeConverter=TypeConverters.toListString)
strategy = Param(Params._dummy(), "strategy",
"strategy for imputation. If mean, then replace missing values using the mean "
"value of the feature. If median, then replace missing values using the "
"median value of the feature.",
typeConverter=TypeConverters.toString)
missingValue = Param(Params._dummy(), "missingValue",
"The placeholder for the missing values. All occurrences of missingValue "
"will be imputed.", typeConverter=TypeConverters.toFloat)
@keyword_only
def __init__(self, strategy="mean", missingValue=float("nan"), inputCols=None,
outputCols=None):
"""
__init__(self, strategy="mean", missingValue=float("nan"), inputCols=None, \
outputCols=None):
"""
super(Imputer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.Imputer", self.uid)
self._setDefault(strategy="mean", missingValue=float("nan"))
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("2.2.0")
def setParams(self, strategy="mean", missingValue=float("nan"), inputCols=None,
outputCols=None):
"""
setParams(self, strategy="mean", missingValue=float("nan"), inputCols=None, \
outputCols=None)
Sets params for this Imputer.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("2.2.0")
def setOutputCols(self, value):
"""
Sets the value of :py:attr:`outputCols`.
"""
return self._set(outputCols=value)
[docs] @since("2.2.0")
def getOutputCols(self):
"""
Gets the value of :py:attr:`outputCols` or its default value.
"""
return self.getOrDefault(self.outputCols)
[docs] @since("2.2.0")
def setStrategy(self, value):
"""
Sets the value of :py:attr:`strategy`.
"""
return self._set(strategy=value)
[docs] @since("2.2.0")
def getStrategy(self):
"""
Gets the value of :py:attr:`strategy` or its default value.
"""
return self.getOrDefault(self.strategy)
[docs] @since("2.2.0")
def setMissingValue(self, value):
"""
Sets the value of :py:attr:`missingValue`.
"""
return self._set(missingValue=value)
[docs] @since("2.2.0")
def getMissingValue(self):
"""
Gets the value of :py:attr:`missingValue` or its default value.
"""
return self.getOrDefault(self.missingValue)
def _create_model(self, java_model):
return ImputerModel(java_model)
[docs]class ImputerModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
.. note:: Experimental
Model fitted by :py:class:`Imputer`.
.. versionadded:: 2.2.0
"""
@property
@since("2.2.0")
def surrogateDF(self):
"""
Returns a DataFrame containing inputCols and their corresponding surrogates,
which are used to replace the missing values in the input DataFrame.
"""
return self._call_java("surrogateDF")
[docs]@inherit_doc
class MaxAbsScaler(JavaEstimator, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
Rescale each feature individually to range [-1, 1] by dividing through the largest maximum
absolute value in each feature. It does not shift/center the data, and thus does not destroy
any sparsity.
>>> from pyspark.ml.linalg import Vectors
>>> df = spark.createDataFrame([(Vectors.dense([1.0]),), (Vectors.dense([2.0]),)], ["a"])
>>> maScaler = MaxAbsScaler(inputCol="a", outputCol="scaled")
>>> model = maScaler.fit(df)
>>> model.transform(df).show()
+-----+------+
| a|scaled|
+-----+------+
|[1.0]| [0.5]|
|[2.0]| [1.0]|
+-----+------+
...
>>> scalerPath = temp_path + "/max-abs-scaler"
>>> maScaler.save(scalerPath)
>>> loadedMAScaler = MaxAbsScaler.load(scalerPath)
>>> loadedMAScaler.getInputCol() == maScaler.getInputCol()
True
>>> loadedMAScaler.getOutputCol() == maScaler.getOutputCol()
True
>>> modelPath = temp_path + "/max-abs-scaler-model"
>>> model.save(modelPath)
>>> loadedModel = MaxAbsScalerModel.load(modelPath)
>>> loadedModel.maxAbs == model.maxAbs
True
.. versionadded:: 2.0.0
"""
@keyword_only
def __init__(self, inputCol=None, outputCol=None):
"""
__init__(self, inputCol=None, outputCol=None)
"""
super(MaxAbsScaler, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.MaxAbsScaler", self.uid)
self._setDefault()
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("2.0.0")
def setParams(self, inputCol=None, outputCol=None):
"""
setParams(self, inputCol=None, outputCol=None)
Sets params for this MaxAbsScaler.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
def _create_model(self, java_model):
return MaxAbsScalerModel(java_model)
[docs]class MaxAbsScalerModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`MaxAbsScaler`.
.. versionadded:: 2.0.0
"""
@property
@since("2.0.0")
def maxAbs(self):
"""
Max Abs vector.
"""
return self._call_java("maxAbs")
[docs]@inherit_doc
class MinHashLSH(JavaEstimator, LSHParams, HasInputCol, HasOutputCol, HasSeed,
JavaMLReadable, JavaMLWritable):
"""
.. note:: Experimental
LSH class for Jaccard distance.
The input can be dense or sparse vectors, but it is more efficient if it is sparse.
For example, `Vectors.sparse(10, [(2, 1.0), (3, 1.0), (5, 1.0)])` means there are 10 elements
in the space. This set contains elements 2, 3, and 5. Also, any input vector must have at
least 1 non-zero index, and all non-zero values are treated as binary "1" values.
.. seealso:: `Wikipedia on MinHash <https://en.wikipedia.org/wiki/MinHash>`_
>>> from pyspark.ml.linalg import Vectors
>>> from pyspark.sql.functions import col
>>> data = [(0, Vectors.sparse(6, [0, 1, 2], [1.0, 1.0, 1.0]),),
... (1, Vectors.sparse(6, [2, 3, 4], [1.0, 1.0, 1.0]),),
... (2, Vectors.sparse(6, [0, 2, 4], [1.0, 1.0, 1.0]),)]
>>> df = spark.createDataFrame(data, ["id", "features"])
>>> mh = MinHashLSH(inputCol="features", outputCol="hashes", seed=12345)
>>> model = mh.fit(df)
>>> model.transform(df).head()
Row(id=0, features=SparseVector(6, {0: 1.0, 1: 1.0, 2: 1.0}), hashes=[DenseVector([6179668...
>>> data2 = [(3, Vectors.sparse(6, [1, 3, 5], [1.0, 1.0, 1.0]),),
... (4, Vectors.sparse(6, [2, 3, 5], [1.0, 1.0, 1.0]),),
... (5, Vectors.sparse(6, [1, 2, 4], [1.0, 1.0, 1.0]),)]
>>> df2 = spark.createDataFrame(data2, ["id", "features"])
>>> key = Vectors.sparse(6, [1, 2], [1.0, 1.0])
>>> model.approxNearestNeighbors(df2, key, 1).collect()
[Row(id=5, features=SparseVector(6, {1: 1.0, 2: 1.0, 4: 1.0}), hashes=[DenseVector([6179668...
>>> model.approxSimilarityJoin(df, df2, 0.6, distCol="JaccardDistance").select(
... col("datasetA.id").alias("idA"),
... col("datasetB.id").alias("idB"),
... col("JaccardDistance")).show()
+---+---+---------------+
|idA|idB|JaccardDistance|
+---+---+---------------+
| 0| 5| 0.5|
| 1| 4| 0.5|
+---+---+---------------+
...
>>> mhPath = temp_path + "/mh"
>>> mh.save(mhPath)
>>> mh2 = MinHashLSH.load(mhPath)
>>> mh2.getOutputCol() == mh.getOutputCol()
True
>>> modelPath = temp_path + "/mh-model"
>>> model.save(modelPath)
>>> model2 = MinHashLSHModel.load(modelPath)
>>> model.transform(df).head().hashes == model2.transform(df).head().hashes
True
.. versionadded:: 2.2.0
"""
@keyword_only
def __init__(self, inputCol=None, outputCol=None, seed=None, numHashTables=1):
"""
__init__(self, inputCol=None, outputCol=None, seed=None, numHashTables=1)
"""
super(MinHashLSH, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.MinHashLSH", self.uid)
self._setDefault(numHashTables=1)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("2.2.0")
def setParams(self, inputCol=None, outputCol=None, seed=None, numHashTables=1):
"""
setParams(self, inputCol=None, outputCol=None, seed=None, numHashTables=1)
Sets params for this MinHashLSH.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
def _create_model(self, java_model):
return MinHashLSHModel(java_model)
[docs]class MinHashLSHModel(LSHModel, JavaMLReadable, JavaMLWritable):
r"""
.. note:: Experimental
Model produced by :py:class:`MinHashLSH`, where where multiple hash functions are stored. Each
hash function is picked from the following family of hash functions, where :math:`a_i` and
:math:`b_i` are randomly chosen integers less than prime:
:math:`h_i(x) = ((x \cdot a_i + b_i) \mod prime)` This hash family is approximately min-wise
independent according to the reference.
.. seealso:: Tom Bohman, Colin Cooper, and Alan Frieze. "Min-wise independent linear
permutations." Electronic Journal of Combinatorics 7 (2000): R26.
.. versionadded:: 2.2.0
"""
[docs]@inherit_doc
class MinMaxScaler(JavaEstimator, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
Rescale each feature individually to a common range [min, max] linearly using column summary
statistics, which is also known as min-max normalization or Rescaling. The rescaled value for
feature E is calculated as,
Rescaled(e_i) = (e_i - E_min) / (E_max - E_min) * (max - min) + min
For the case E_max == E_min, Rescaled(e_i) = 0.5 * (max + min)
.. note:: Since zero values will probably be transformed to non-zero values, output of the
transformer will be DenseVector even for sparse input.
>>> from pyspark.ml.linalg import Vectors
>>> df = spark.createDataFrame([(Vectors.dense([0.0]),), (Vectors.dense([2.0]),)], ["a"])
>>> mmScaler = MinMaxScaler(inputCol="a", outputCol="scaled")
>>> model = mmScaler.fit(df)
>>> model.originalMin
DenseVector([0.0])
>>> model.originalMax
DenseVector([2.0])
>>> model.transform(df).show()
+-----+------+
| a|scaled|
+-----+------+
|[0.0]| [0.0]|
|[2.0]| [1.0]|
+-----+------+
...
>>> minMaxScalerPath = temp_path + "/min-max-scaler"
>>> mmScaler.save(minMaxScalerPath)
>>> loadedMMScaler = MinMaxScaler.load(minMaxScalerPath)
>>> loadedMMScaler.getMin() == mmScaler.getMin()
True
>>> loadedMMScaler.getMax() == mmScaler.getMax()
True
>>> modelPath = temp_path + "/min-max-scaler-model"
>>> model.save(modelPath)
>>> loadedModel = MinMaxScalerModel.load(modelPath)
>>> loadedModel.originalMin == model.originalMin
True
>>> loadedModel.originalMax == model.originalMax
True
.. versionadded:: 1.6.0
"""
min = Param(Params._dummy(), "min", "Lower bound of the output feature range",
typeConverter=TypeConverters.toFloat)
max = Param(Params._dummy(), "max", "Upper bound of the output feature range",
typeConverter=TypeConverters.toFloat)
@keyword_only
def __init__(self, min=0.0, max=1.0, inputCol=None, outputCol=None):
"""
__init__(self, min=0.0, max=1.0, inputCol=None, outputCol=None)
"""
super(MinMaxScaler, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.MinMaxScaler", self.uid)
self._setDefault(min=0.0, max=1.0)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.6.0")
def setParams(self, min=0.0, max=1.0, inputCol=None, outputCol=None):
"""
setParams(self, min=0.0, max=1.0, inputCol=None, outputCol=None)
Sets params for this MinMaxScaler.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.6.0")
def setMin(self, value):
"""
Sets the value of :py:attr:`min`.
"""
return self._set(min=value)
[docs] @since("1.6.0")
def getMin(self):
"""
Gets the value of min or its default value.
"""
return self.getOrDefault(self.min)
[docs] @since("1.6.0")
def setMax(self, value):
"""
Sets the value of :py:attr:`max`.
"""
return self._set(max=value)
[docs] @since("1.6.0")
def getMax(self):
"""
Gets the value of max or its default value.
"""
return self.getOrDefault(self.max)
def _create_model(self, java_model):
return MinMaxScalerModel(java_model)
[docs]class MinMaxScalerModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`MinMaxScaler`.
.. versionadded:: 1.6.0
"""
@property
@since("2.0.0")
def originalMin(self):
"""
Min value for each original column during fitting.
"""
return self._call_java("originalMin")
@property
@since("2.0.0")
def originalMax(self):
"""
Max value for each original column during fitting.
"""
return self._call_java("originalMax")
[docs]@inherit_doc
@ignore_unicode_prefix
class NGram(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
A feature transformer that converts the input array of strings into an array of n-grams. Null
values in the input array are ignored.
It returns an array of n-grams where each n-gram is represented by a space-separated string of
words.
When the input is empty, an empty array is returned.
When the input array length is less than n (number of elements per n-gram), no n-grams are
returned.
>>> df = spark.createDataFrame([Row(inputTokens=["a", "b", "c", "d", "e"])])
>>> ngram = NGram(n=2, inputCol="inputTokens", outputCol="nGrams")
>>> ngram.transform(df).head()
Row(inputTokens=[u'a', u'b', u'c', u'd', u'e'], nGrams=[u'a b', u'b c', u'c d', u'd e'])
>>> # Change n-gram length
>>> ngram.setParams(n=4).transform(df).head()
Row(inputTokens=[u'a', u'b', u'c', u'd', u'e'], nGrams=[u'a b c d', u'b c d e'])
>>> # Temporarily modify output column.
>>> ngram.transform(df, {ngram.outputCol: "output"}).head()
Row(inputTokens=[u'a', u'b', u'c', u'd', u'e'], output=[u'a b c d', u'b c d e'])
>>> ngram.transform(df).head()
Row(inputTokens=[u'a', u'b', u'c', u'd', u'e'], nGrams=[u'a b c d', u'b c d e'])
>>> # Must use keyword arguments to specify params.
>>> ngram.setParams("text")
Traceback (most recent call last):
...
TypeError: Method setParams forces keyword arguments.
>>> ngramPath = temp_path + "/ngram"
>>> ngram.save(ngramPath)
>>> loadedNGram = NGram.load(ngramPath)
>>> loadedNGram.getN() == ngram.getN()
True
.. versionadded:: 1.5.0
"""
n = Param(Params._dummy(), "n", "number of elements per n-gram (>=1)",
typeConverter=TypeConverters.toInt)
@keyword_only
def __init__(self, n=2, inputCol=None, outputCol=None):
"""
__init__(self, n=2, inputCol=None, outputCol=None)
"""
super(NGram, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.NGram", self.uid)
self._setDefault(n=2)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.5.0")
def setParams(self, n=2, inputCol=None, outputCol=None):
"""
setParams(self, n=2, inputCol=None, outputCol=None)
Sets params for this NGram.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.5.0")
def setN(self, value):
"""
Sets the value of :py:attr:`n`.
"""
return self._set(n=value)
[docs] @since("1.5.0")
def getN(self):
"""
Gets the value of n or its default value.
"""
return self.getOrDefault(self.n)
[docs]@inherit_doc
class Normalizer(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
Normalize a vector to have unit norm using the given p-norm.
>>> from pyspark.ml.linalg import Vectors
>>> svec = Vectors.sparse(4, {1: 4.0, 3: 3.0})
>>> df = spark.createDataFrame([(Vectors.dense([3.0, -4.0]), svec)], ["dense", "sparse"])
>>> normalizer = Normalizer(p=2.0, inputCol="dense", outputCol="features")
>>> normalizer.transform(df).head().features
DenseVector([0.6, -0.8])
>>> normalizer.setParams(inputCol="sparse", outputCol="freqs").transform(df).head().freqs
SparseVector(4, {1: 0.8, 3: 0.6})
>>> params = {normalizer.p: 1.0, normalizer.inputCol: "dense", normalizer.outputCol: "vector"}
>>> normalizer.transform(df, params).head().vector
DenseVector([0.4286, -0.5714])
>>> normalizerPath = temp_path + "/normalizer"
>>> normalizer.save(normalizerPath)
>>> loadedNormalizer = Normalizer.load(normalizerPath)
>>> loadedNormalizer.getP() == normalizer.getP()
True
.. versionadded:: 1.4.0
"""
p = Param(Params._dummy(), "p", "the p norm value.",
typeConverter=TypeConverters.toFloat)
@keyword_only
def __init__(self, p=2.0, inputCol=None, outputCol=None):
"""
__init__(self, p=2.0, inputCol=None, outputCol=None)
"""
super(Normalizer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.Normalizer", self.uid)
self._setDefault(p=2.0)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, p=2.0, inputCol=None, outputCol=None):
"""
setParams(self, p=2.0, inputCol=None, outputCol=None)
Sets params for this Normalizer.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.4.0")
def setP(self, value):
"""
Sets the value of :py:attr:`p`.
"""
return self._set(p=value)
[docs] @since("1.4.0")
def getP(self):
"""
Gets the value of p or its default value.
"""
return self.getOrDefault(self.p)
[docs]@inherit_doc
class OneHotEncoder(JavaEstimator, HasInputCols, HasOutputCols, HasHandleInvalid,
JavaMLReadable, JavaMLWritable):
"""
A one-hot encoder that maps a column of category indices to a column of binary vectors, with
at most a single one-value per row that indicates the input category index.
For example with 5 categories, an input value of 2.0 would map to an output vector of
`[0.0, 0.0, 1.0, 0.0]`.
The last category is not included by default (configurable via :py:attr:`dropLast`),
because it makes the vector entries sum up to one, and hence linearly dependent.
So an input value of 4.0 maps to `[0.0, 0.0, 0.0, 0.0]`.
.. note:: This is different from scikit-learn's OneHotEncoder, which keeps all categories.
The output vectors are sparse.
When :py:attr:`handleInvalid` is configured to 'keep', an extra "category" indicating invalid
values is added as last category. So when :py:attr:`dropLast` is true, invalid values are
encoded as all-zeros vector.
.. note:: When encoding multi-column by using :py:attr:`inputCols` and
:py:attr:`outputCols` params, input/output cols come in pairs, specified by the order in
the arrays, and each pair is treated independently.
.. seealso:: :py:class:`StringIndexer` for converting categorical values into category indices
>>> from pyspark.ml.linalg import Vectors
>>> df = spark.createDataFrame([(0.0,), (1.0,), (2.0,)], ["input"])
>>> ohe = OneHotEncoder(inputCols=["input"], outputCols=["output"])
>>> model = ohe.fit(df)
>>> model.transform(df).head().output
SparseVector(2, {0: 1.0})
>>> ohePath = temp_path + "/ohe"
>>> ohe.save(ohePath)
>>> loadedOHE = OneHotEncoder.load(ohePath)
>>> loadedOHE.getInputCols() == ohe.getInputCols()
True
>>> modelPath = temp_path + "/ohe-model"
>>> model.save(modelPath)
>>> loadedModel = OneHotEncoderModel.load(modelPath)
>>> loadedModel.categorySizes == model.categorySizes
True
.. versionadded:: 2.3.0
"""
handleInvalid = Param(Params._dummy(), "handleInvalid", "How to handle invalid data during " +
"transform(). Options are 'keep' (invalid data presented as an extra " +
"categorical feature) or error (throw an error). Note that this Param " +
"is only used during transform; during fitting, invalid data will " +
"result in an error.",
typeConverter=TypeConverters.toString)
dropLast = Param(Params._dummy(), "dropLast", "whether to drop the last category",
typeConverter=TypeConverters.toBoolean)
@keyword_only
def __init__(self, inputCols=None, outputCols=None, handleInvalid="error", dropLast=True):
"""
__init__(self, inputCols=None, outputCols=None, handleInvalid="error", dropLast=True)
"""
super(OneHotEncoder, self).__init__()
self._java_obj = self._new_java_obj(
"org.apache.spark.ml.feature.OneHotEncoder", self.uid)
self._setDefault(handleInvalid="error", dropLast=True)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("2.3.0")
def setParams(self, inputCols=None, outputCols=None, handleInvalid="error", dropLast=True):
"""
setParams(self, inputCols=None, outputCols=None, handleInvalid="error", dropLast=True)
Sets params for this OneHotEncoder.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("2.3.0")
def setDropLast(self, value):
"""
Sets the value of :py:attr:`dropLast`.
"""
return self._set(dropLast=value)
[docs] @since("2.3.0")
def getDropLast(self):
"""
Gets the value of dropLast or its default value.
"""
return self.getOrDefault(self.dropLast)
def _create_model(self, java_model):
return OneHotEncoderModel(java_model)
[docs]class OneHotEncoderModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`OneHotEncoder`.
.. versionadded:: 2.3.0
"""
@property
@since("2.3.0")
def categorySizes(self):
"""
Original number of categories for each feature being encoded.
The array contains one value for each input column, in order.
"""
return self._call_java("categorySizes")
[docs]@inherit_doc
class PolynomialExpansion(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable,
JavaMLWritable):
"""
Perform feature expansion in a polynomial space. As said in `wikipedia of Polynomial Expansion
<http://en.wikipedia.org/wiki/Polynomial_expansion>`_, "In mathematics, an
expansion of a product of sums expresses it as a sum of products by using the fact that
multiplication distributes over addition". Take a 2-variable feature vector as an example:
`(x, y)`, if we want to expand it with degree 2, then we get `(x, x * x, y, x * y, y * y)`.
>>> from pyspark.ml.linalg import Vectors
>>> df = spark.createDataFrame([(Vectors.dense([0.5, 2.0]),)], ["dense"])
>>> px = PolynomialExpansion(degree=2, inputCol="dense", outputCol="expanded")
>>> px.transform(df).head().expanded
DenseVector([0.5, 0.25, 2.0, 1.0, 4.0])
>>> px.setParams(outputCol="test").transform(df).head().test
DenseVector([0.5, 0.25, 2.0, 1.0, 4.0])
>>> polyExpansionPath = temp_path + "/poly-expansion"
>>> px.save(polyExpansionPath)
>>> loadedPx = PolynomialExpansion.load(polyExpansionPath)
>>> loadedPx.getDegree() == px.getDegree()
True
.. versionadded:: 1.4.0
"""
degree = Param(Params._dummy(), "degree", "the polynomial degree to expand (>= 1)",
typeConverter=TypeConverters.toInt)
@keyword_only
def __init__(self, degree=2, inputCol=None, outputCol=None):
"""
__init__(self, degree=2, inputCol=None, outputCol=None)
"""
super(PolynomialExpansion, self).__init__()
self._java_obj = self._new_java_obj(
"org.apache.spark.ml.feature.PolynomialExpansion", self.uid)
self._setDefault(degree=2)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, degree=2, inputCol=None, outputCol=None):
"""
setParams(self, degree=2, inputCol=None, outputCol=None)
Sets params for this PolynomialExpansion.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.4.0")
def setDegree(self, value):
"""
Sets the value of :py:attr:`degree`.
"""
return self._set(degree=value)
[docs] @since("1.4.0")
def getDegree(self):
"""
Gets the value of degree or its default value.
"""
return self.getOrDefault(self.degree)
[docs]@inherit_doc
class QuantileDiscretizer(JavaEstimator, HasInputCol, HasOutputCol, HasHandleInvalid,
JavaMLReadable, JavaMLWritable):
"""
.. note:: Experimental
`QuantileDiscretizer` takes a column with continuous features and outputs a column with binned
categorical features. The number of bins can be set using the :py:attr:`numBuckets` parameter.
It is possible that the number of buckets used will be less than this value, for example, if
there are too few distinct values of the input to create enough distinct quantiles.
NaN handling: Note also that
QuantileDiscretizer will raise an error when it finds NaN values in the dataset, but the user
can also choose to either keep or remove NaN values within the dataset by setting
:py:attr:`handleInvalid` parameter. If the user chooses to keep NaN values, they will be
handled specially and placed into their own bucket, for example, if 4 buckets are used, then
non-NaN data will be put into buckets[0-3], but NaNs will be counted in a special bucket[4].
Algorithm: The bin ranges are chosen using an approximate algorithm (see the documentation for
:py:meth:`~.DataFrameStatFunctions.approxQuantile` for a detailed description).
The precision of the approximation can be controlled with the
:py:attr:`relativeError` parameter.
The lower and upper bin bounds will be `-Infinity` and `+Infinity`, covering all real values.
>>> values = [(0.1,), (0.4,), (1.2,), (1.5,), (float("nan"),), (float("nan"),)]
>>> df = spark.createDataFrame(values, ["values"])
>>> qds = QuantileDiscretizer(numBuckets=2,
... inputCol="values", outputCol="buckets", relativeError=0.01, handleInvalid="error")
>>> qds.getRelativeError()
0.01
>>> bucketizer = qds.fit(df)
>>> qds.setHandleInvalid("keep").fit(df).transform(df).count()
6
>>> qds.setHandleInvalid("skip").fit(df).transform(df).count()
4
>>> splits = bucketizer.getSplits()
>>> splits[0]
-inf
>>> print("%2.1f" % round(splits[1], 1))
0.4
>>> bucketed = bucketizer.transform(df).head()
>>> bucketed.buckets
0.0
>>> quantileDiscretizerPath = temp_path + "/quantile-discretizer"
>>> qds.save(quantileDiscretizerPath)
>>> loadedQds = QuantileDiscretizer.load(quantileDiscretizerPath)
>>> loadedQds.getNumBuckets() == qds.getNumBuckets()
True
.. versionadded:: 2.0.0
"""
numBuckets = Param(Params._dummy(), "numBuckets",
"Maximum number of buckets (quantiles, or " +
"categories) into which data points are grouped. Must be >= 2.",
typeConverter=TypeConverters.toInt)
relativeError = Param(Params._dummy(), "relativeError", "The relative target precision for " +
"the approximate quantile algorithm used to generate buckets. " +
"Must be in the range [0, 1].",
typeConverter=TypeConverters.toFloat)
handleInvalid = Param(Params._dummy(), "handleInvalid", "how to handle invalid entries. " +
"Options are skip (filter out rows with invalid values), " +
"error (throw an error), or keep (keep invalid values in a special " +
"additional bucket).",
typeConverter=TypeConverters.toString)
@keyword_only
def __init__(self, numBuckets=2, inputCol=None, outputCol=None, relativeError=0.001,
handleInvalid="error"):
"""
__init__(self, numBuckets=2, inputCol=None, outputCol=None, relativeError=0.001, \
handleInvalid="error")
"""
super(QuantileDiscretizer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.QuantileDiscretizer",
self.uid)
self._setDefault(numBuckets=2, relativeError=0.001, handleInvalid="error")
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("2.0.0")
def setParams(self, numBuckets=2, inputCol=None, outputCol=None, relativeError=0.001,
handleInvalid="error"):
"""
setParams(self, numBuckets=2, inputCol=None, outputCol=None, relativeError=0.001, \
handleInvalid="error")
Set the params for the QuantileDiscretizer
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("2.0.0")
def setNumBuckets(self, value):
"""
Sets the value of :py:attr:`numBuckets`.
"""
return self._set(numBuckets=value)
[docs] @since("2.0.0")
def getNumBuckets(self):
"""
Gets the value of numBuckets or its default value.
"""
return self.getOrDefault(self.numBuckets)
[docs] @since("2.0.0")
def setRelativeError(self, value):
"""
Sets the value of :py:attr:`relativeError`.
"""
return self._set(relativeError=value)
[docs] @since("2.0.0")
def getRelativeError(self):
"""
Gets the value of relativeError or its default value.
"""
return self.getOrDefault(self.relativeError)
def _create_model(self, java_model):
"""
Private method to convert the java_model to a Python model.
"""
return Bucketizer(splits=list(java_model.getSplits()),
inputCol=self.getInputCol(),
outputCol=self.getOutputCol(),
handleInvalid=self.getHandleInvalid())
[docs]@inherit_doc
@ignore_unicode_prefix
class RegexTokenizer(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
A regex based tokenizer that extracts tokens either by using the
provided regex pattern (in Java dialect) to split the text
(default) or repeatedly matching the regex (if gaps is false).
Optional parameters also allow filtering tokens using a minimal
length.
It returns an array of strings that can be empty.
>>> df = spark.createDataFrame([("A B c",)], ["text"])
>>> reTokenizer = RegexTokenizer(inputCol="text", outputCol="words")
>>> reTokenizer.transform(df).head()
Row(text=u'A B c', words=[u'a', u'b', u'c'])
>>> # Change a parameter.
>>> reTokenizer.setParams(outputCol="tokens").transform(df).head()
Row(text=u'A B c', tokens=[u'a', u'b', u'c'])
>>> # Temporarily modify a parameter.
>>> reTokenizer.transform(df, {reTokenizer.outputCol: "words"}).head()
Row(text=u'A B c', words=[u'a', u'b', u'c'])
>>> reTokenizer.transform(df).head()
Row(text=u'A B c', tokens=[u'a', u'b', u'c'])
>>> # Must use keyword arguments to specify params.
>>> reTokenizer.setParams("text")
Traceback (most recent call last):
...
TypeError: Method setParams forces keyword arguments.
>>> regexTokenizerPath = temp_path + "/regex-tokenizer"
>>> reTokenizer.save(regexTokenizerPath)
>>> loadedReTokenizer = RegexTokenizer.load(regexTokenizerPath)
>>> loadedReTokenizer.getMinTokenLength() == reTokenizer.getMinTokenLength()
True
>>> loadedReTokenizer.getGaps() == reTokenizer.getGaps()
True
.. versionadded:: 1.4.0
"""
minTokenLength = Param(Params._dummy(), "minTokenLength", "minimum token length (>= 0)",
typeConverter=TypeConverters.toInt)
gaps = Param(Params._dummy(), "gaps", "whether regex splits on gaps (True) or matches tokens " +
"(False)")
pattern = Param(Params._dummy(), "pattern", "regex pattern (Java dialect) used for tokenizing",
typeConverter=TypeConverters.toString)
toLowercase = Param(Params._dummy(), "toLowercase", "whether to convert all characters to " +
"lowercase before tokenizing", typeConverter=TypeConverters.toBoolean)
@keyword_only
def __init__(self, minTokenLength=1, gaps=True, pattern="\\s+", inputCol=None,
outputCol=None, toLowercase=True):
"""
__init__(self, minTokenLength=1, gaps=True, pattern="\\s+", inputCol=None, \
outputCol=None, toLowercase=True)
"""
super(RegexTokenizer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.RegexTokenizer", self.uid)
self._setDefault(minTokenLength=1, gaps=True, pattern="\\s+", toLowercase=True)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, minTokenLength=1, gaps=True, pattern="\\s+", inputCol=None,
outputCol=None, toLowercase=True):
"""
setParams(self, minTokenLength=1, gaps=True, pattern="\\s+", inputCol=None, \
outputCol=None, toLowercase=True)
Sets params for this RegexTokenizer.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.4.0")
def setMinTokenLength(self, value):
"""
Sets the value of :py:attr:`minTokenLength`.
"""
return self._set(minTokenLength=value)
[docs] @since("1.4.0")
def getMinTokenLength(self):
"""
Gets the value of minTokenLength or its default value.
"""
return self.getOrDefault(self.minTokenLength)
[docs] @since("1.4.0")
def setGaps(self, value):
"""
Sets the value of :py:attr:`gaps`.
"""
return self._set(gaps=value)
[docs] @since("1.4.0")
def getGaps(self):
"""
Gets the value of gaps or its default value.
"""
return self.getOrDefault(self.gaps)
[docs] @since("1.4.0")
def setPattern(self, value):
"""
Sets the value of :py:attr:`pattern`.
"""
return self._set(pattern=value)
[docs] @since("1.4.0")
def getPattern(self):
"""
Gets the value of pattern or its default value.
"""
return self.getOrDefault(self.pattern)
[docs] @since("2.0.0")
def setToLowercase(self, value):
"""
Sets the value of :py:attr:`toLowercase`.
"""
return self._set(toLowercase=value)
[docs] @since("2.0.0")
def getToLowercase(self):
"""
Gets the value of toLowercase or its default value.
"""
return self.getOrDefault(self.toLowercase)
[docs]@inherit_doc
class StandardScaler(JavaEstimator, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
Standardizes features by removing the mean and scaling to unit variance using column summary
statistics on the samples in the training set.
The "unit std" is computed using the `corrected sample standard deviation \
<https://en.wikipedia.org/wiki/Standard_deviation#Corrected_sample_standard_deviation>`_,
which is computed as the square root of the unbiased sample variance.
>>> from pyspark.ml.linalg import Vectors
>>> df = spark.createDataFrame([(Vectors.dense([0.0]),), (Vectors.dense([2.0]),)], ["a"])
>>> standardScaler = StandardScaler(inputCol="a", outputCol="scaled")
>>> model = standardScaler.fit(df)
>>> model.mean
DenseVector([1.0])
>>> model.std
DenseVector([1.4142])
>>> model.transform(df).collect()[1].scaled
DenseVector([1.4142])
>>> standardScalerPath = temp_path + "/standard-scaler"
>>> standardScaler.save(standardScalerPath)
>>> loadedStandardScaler = StandardScaler.load(standardScalerPath)
>>> loadedStandardScaler.getWithMean() == standardScaler.getWithMean()
True
>>> loadedStandardScaler.getWithStd() == standardScaler.getWithStd()
True
>>> modelPath = temp_path + "/standard-scaler-model"
>>> model.save(modelPath)
>>> loadedModel = StandardScalerModel.load(modelPath)
>>> loadedModel.std == model.std
True
>>> loadedModel.mean == model.mean
True
.. versionadded:: 1.4.0
"""
withMean = Param(Params._dummy(), "withMean", "Center data with mean",
typeConverter=TypeConverters.toBoolean)
withStd = Param(Params._dummy(), "withStd", "Scale to unit standard deviation",
typeConverter=TypeConverters.toBoolean)
@keyword_only
def __init__(self, withMean=False, withStd=True, inputCol=None, outputCol=None):
"""
__init__(self, withMean=False, withStd=True, inputCol=None, outputCol=None)
"""
super(StandardScaler, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.StandardScaler", self.uid)
self._setDefault(withMean=False, withStd=True)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, withMean=False, withStd=True, inputCol=None, outputCol=None):
"""
setParams(self, withMean=False, withStd=True, inputCol=None, outputCol=None)
Sets params for this StandardScaler.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.4.0")
def setWithMean(self, value):
"""
Sets the value of :py:attr:`withMean`.
"""
return self._set(withMean=value)
[docs] @since("1.4.0")
def getWithMean(self):
"""
Gets the value of withMean or its default value.
"""
return self.getOrDefault(self.withMean)
[docs] @since("1.4.0")
def setWithStd(self, value):
"""
Sets the value of :py:attr:`withStd`.
"""
return self._set(withStd=value)
[docs] @since("1.4.0")
def getWithStd(self):
"""
Gets the value of withStd or its default value.
"""
return self.getOrDefault(self.withStd)
def _create_model(self, java_model):
return StandardScalerModel(java_model)
[docs]class StandardScalerModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`StandardScaler`.
.. versionadded:: 1.4.0
"""
@property
@since("2.0.0")
def std(self):
"""
Standard deviation of the StandardScalerModel.
"""
return self._call_java("std")
@property
@since("2.0.0")
def mean(self):
"""
Mean of the StandardScalerModel.
"""
return self._call_java("mean")
class _StringIndexerParams(JavaParams, HasHandleInvalid, HasInputCol, HasOutputCol):
"""
Params for :py:attr:`StringIndexer` and :py:attr:`StringIndexerModel`.
"""
stringOrderType = Param(Params._dummy(), "stringOrderType",
"How to order labels of string column. The first label after " +
"ordering is assigned an index of 0. Supported options: " +
"frequencyDesc, frequencyAsc, alphabetDesc, alphabetAsc.",
typeConverter=TypeConverters.toString)
handleInvalid = Param(Params._dummy(), "handleInvalid", "how to handle invalid data (unseen " +
"or NULL values) in features and label column of string type. " +
"Options are 'skip' (filter out rows with invalid data), " +
"error (throw an error), or 'keep' (put invalid data " +
"in a special additional bucket, at index numLabels).",
typeConverter=TypeConverters.toString)
def __init__(self, *args):
super(_StringIndexerParams, self).__init__(*args)
self._setDefault(handleInvalid="error", stringOrderType="frequencyDesc")
@since("2.3.0")
def getStringOrderType(self):
"""
Gets the value of :py:attr:`stringOrderType` or its default value 'frequencyDesc'.
"""
return self.getOrDefault(self.stringOrderType)
[docs]@inherit_doc
class StringIndexer(JavaEstimator, _StringIndexerParams, JavaMLReadable, JavaMLWritable):
"""
A label indexer that maps a string column of labels to an ML column of label indices.
If the input column is numeric, we cast it to string and index the string values.
The indices are in [0, numLabels). By default, this is ordered by label frequencies
so the most frequent label gets index 0. The ordering behavior is controlled by
setting :py:attr:`stringOrderType`. Its default value is 'frequencyDesc'.
>>> stringIndexer = StringIndexer(inputCol="label", outputCol="indexed", handleInvalid="error",
... stringOrderType="frequencyDesc")
>>> model = stringIndexer.fit(stringIndDf)
>>> td = model.transform(stringIndDf)
>>> sorted(set([(i[0], i[1]) for i in td.select(td.id, td.indexed).collect()]),
... key=lambda x: x[0])
[(0, 0.0), (1, 2.0), (2, 1.0), (3, 0.0), (4, 0.0), (5, 1.0)]
>>> inverter = IndexToString(inputCol="indexed", outputCol="label2", labels=model.labels)
>>> itd = inverter.transform(td)
>>> sorted(set([(i[0], str(i[1])) for i in itd.select(itd.id, itd.label2).collect()]),
... key=lambda x: x[0])
[(0, 'a'), (1, 'b'), (2, 'c'), (3, 'a'), (4, 'a'), (5, 'c')]
>>> stringIndexerPath = temp_path + "/string-indexer"
>>> stringIndexer.save(stringIndexerPath)
>>> loadedIndexer = StringIndexer.load(stringIndexerPath)
>>> loadedIndexer.getHandleInvalid() == stringIndexer.getHandleInvalid()
True
>>> modelPath = temp_path + "/string-indexer-model"
>>> model.save(modelPath)
>>> loadedModel = StringIndexerModel.load(modelPath)
>>> loadedModel.labels == model.labels
True
>>> indexToStringPath = temp_path + "/index-to-string"
>>> inverter.save(indexToStringPath)
>>> loadedInverter = IndexToString.load(indexToStringPath)
>>> loadedInverter.getLabels() == inverter.getLabels()
True
>>> stringIndexer.getStringOrderType()
'frequencyDesc'
>>> stringIndexer = StringIndexer(inputCol="label", outputCol="indexed", handleInvalid="error",
... stringOrderType="alphabetDesc")
>>> model = stringIndexer.fit(stringIndDf)
>>> td = model.transform(stringIndDf)
>>> sorted(set([(i[0], i[1]) for i in td.select(td.id, td.indexed).collect()]),
... key=lambda x: x[0])
[(0, 2.0), (1, 1.0), (2, 0.0), (3, 2.0), (4, 2.0), (5, 0.0)]
>>> fromlabelsModel = StringIndexerModel.from_labels(["a", "b", "c"],
... inputCol="label", outputCol="indexed", handleInvalid="error")
>>> result = fromlabelsModel.transform(stringIndDf)
>>> sorted(set([(i[0], i[1]) for i in result.select(result.id, result.indexed).collect()]),
... key=lambda x: x[0])
[(0, 0.0), (1, 1.0), (2, 2.0), (3, 0.0), (4, 0.0), (5, 2.0)]
.. versionadded:: 1.4.0
"""
@keyword_only
def __init__(self, inputCol=None, outputCol=None, handleInvalid="error",
stringOrderType="frequencyDesc"):
"""
__init__(self, inputCol=None, outputCol=None, handleInvalid="error", \
stringOrderType="frequencyDesc")
"""
super(StringIndexer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.StringIndexer", self.uid)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, inputCol=None, outputCol=None, handleInvalid="error",
stringOrderType="frequencyDesc"):
"""
setParams(self, inputCol=None, outputCol=None, handleInvalid="error", \
stringOrderType="frequencyDesc")
Sets params for this StringIndexer.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
def _create_model(self, java_model):
return StringIndexerModel(java_model)
[docs] @since("2.3.0")
def setStringOrderType(self, value):
"""
Sets the value of :py:attr:`stringOrderType`.
"""
return self._set(stringOrderType=value)
[docs]class StringIndexerModel(JavaModel, _StringIndexerParams, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`StringIndexer`.
.. versionadded:: 1.4.0
"""
[docs] @classmethod
@since("2.4.0")
def from_labels(cls, labels, inputCol, outputCol=None, handleInvalid=None):
"""
Construct the model directly from an array of label strings,
requires an active SparkContext.
"""
sc = SparkContext._active_spark_context
java_class = sc._gateway.jvm.java.lang.String
jlabels = StringIndexerModel._new_java_array(labels, java_class)
model = StringIndexerModel._create_from_java_class(
"org.apache.spark.ml.feature.StringIndexerModel", jlabels)
model.setInputCol(inputCol)
if outputCol is not None:
model.setOutputCol(outputCol)
if handleInvalid is not None:
model.setHandleInvalid(handleInvalid)
return model
@property
@since("1.5.0")
def labels(self):
"""
Ordered list of labels, corresponding to indices to be assigned.
"""
return self._call_java("labels")
[docs] @since("2.4.0")
def setHandleInvalid(self, value):
"""
Sets the value of :py:attr:`handleInvalid`.
"""
return self._set(handleInvalid=value)
[docs]@inherit_doc
class IndexToString(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
A :py:class:`Transformer` that maps a column of indices back to a new column of
corresponding string values.
The index-string mapping is either from the ML attributes of the input column,
or from user-supplied labels (which take precedence over ML attributes).
See L{StringIndexer} for converting strings into indices.
.. versionadded:: 1.6.0
"""
labels = Param(Params._dummy(), "labels",
"Optional array of labels specifying index-string mapping." +
" If not provided or if empty, then metadata from inputCol is used instead.",
typeConverter=TypeConverters.toListString)
@keyword_only
def __init__(self, inputCol=None, outputCol=None, labels=None):
"""
__init__(self, inputCol=None, outputCol=None, labels=None)
"""
super(IndexToString, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.IndexToString",
self.uid)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.6.0")
def setParams(self, inputCol=None, outputCol=None, labels=None):
"""
setParams(self, inputCol=None, outputCol=None, labels=None)
Sets params for this IndexToString.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.6.0")
def setLabels(self, value):
"""
Sets the value of :py:attr:`labels`.
"""
return self._set(labels=value)
[docs] @since("1.6.0")
def getLabels(self):
"""
Gets the value of :py:attr:`labels` or its default value.
"""
return self.getOrDefault(self.labels)
[docs]class StopWordsRemover(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
A feature transformer that filters out stop words from input.
.. note:: null values from input array are preserved unless adding null to stopWords explicitly.
>>> df = spark.createDataFrame([(["a", "b", "c"],)], ["text"])
>>> remover = StopWordsRemover(inputCol="text", outputCol="words", stopWords=["b"])
>>> remover.transform(df).head().words == ['a', 'c']
True
>>> stopWordsRemoverPath = temp_path + "/stopwords-remover"
>>> remover.save(stopWordsRemoverPath)
>>> loadedRemover = StopWordsRemover.load(stopWordsRemoverPath)
>>> loadedRemover.getStopWords() == remover.getStopWords()
True
>>> loadedRemover.getCaseSensitive() == remover.getCaseSensitive()
True
.. versionadded:: 1.6.0
"""
stopWords = Param(Params._dummy(), "stopWords", "The words to be filtered out",
typeConverter=TypeConverters.toListString)
caseSensitive = Param(Params._dummy(), "caseSensitive", "whether to do a case sensitive " +
"comparison over the stop words", typeConverter=TypeConverters.toBoolean)
locale = Param(Params._dummy(), "locale", "locale of the input. ignored when case sensitive " +
"is true", typeConverter=TypeConverters.toString)
@keyword_only
def __init__(self, inputCol=None, outputCol=None, stopWords=None, caseSensitive=False,
locale=None):
"""
__init__(self, inputCol=None, outputCol=None, stopWords=None, caseSensitive=false, \
locale=None)
"""
super(StopWordsRemover, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.StopWordsRemover",
self.uid)
self._setDefault(stopWords=StopWordsRemover.loadDefaultStopWords("english"),
caseSensitive=False, locale=self._java_obj.getLocale())
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.6.0")
def setParams(self, inputCol=None, outputCol=None, stopWords=None, caseSensitive=False,
locale=None):
"""
setParams(self, inputCol=None, outputCol=None, stopWords=None, caseSensitive=false, \
locale=None)
Sets params for this StopWordRemover.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.6.0")
def setStopWords(self, value):
"""
Sets the value of :py:attr:`stopWords`.
"""
return self._set(stopWords=value)
[docs] @since("1.6.0")
def getStopWords(self):
"""
Gets the value of :py:attr:`stopWords` or its default value.
"""
return self.getOrDefault(self.stopWords)
[docs] @since("1.6.0")
def setCaseSensitive(self, value):
"""
Sets the value of :py:attr:`caseSensitive`.
"""
return self._set(caseSensitive=value)
[docs] @since("1.6.0")
def getCaseSensitive(self):
"""
Gets the value of :py:attr:`caseSensitive` or its default value.
"""
return self.getOrDefault(self.caseSensitive)
[docs] @since("2.4.0")
def setLocale(self, value):
"""
Sets the value of :py:attr:`locale`.
"""
return self._set(locale=value)
[docs] @since("2.4.0")
def getLocale(self):
"""
Gets the value of :py:attr:`locale`.
"""
return self.getOrDefault(self.locale)
[docs] @staticmethod
@since("2.0.0")
def loadDefaultStopWords(language):
"""
Loads the default stop words for the given language.
Supported languages: danish, dutch, english, finnish, french, german, hungarian,
italian, norwegian, portuguese, russian, spanish, swedish, turkish
"""
stopWordsObj = _jvm().org.apache.spark.ml.feature.StopWordsRemover
return list(stopWordsObj.loadDefaultStopWords(language))
[docs]@inherit_doc
@ignore_unicode_prefix
class Tokenizer(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
A tokenizer that converts the input string to lowercase and then
splits it by white spaces.
>>> df = spark.createDataFrame([("a b c",)], ["text"])
>>> tokenizer = Tokenizer(inputCol="text", outputCol="words")
>>> tokenizer.transform(df).head()
Row(text=u'a b c', words=[u'a', u'b', u'c'])
>>> # Change a parameter.
>>> tokenizer.setParams(outputCol="tokens").transform(df).head()
Row(text=u'a b c', tokens=[u'a', u'b', u'c'])
>>> # Temporarily modify a parameter.
>>> tokenizer.transform(df, {tokenizer.outputCol: "words"}).head()
Row(text=u'a b c', words=[u'a', u'b', u'c'])
>>> tokenizer.transform(df).head()
Row(text=u'a b c', tokens=[u'a', u'b', u'c'])
>>> # Must use keyword arguments to specify params.
>>> tokenizer.setParams("text")
Traceback (most recent call last):
...
TypeError: Method setParams forces keyword arguments.
>>> tokenizerPath = temp_path + "/tokenizer"
>>> tokenizer.save(tokenizerPath)
>>> loadedTokenizer = Tokenizer.load(tokenizerPath)
>>> loadedTokenizer.transform(df).head().tokens == tokenizer.transform(df).head().tokens
True
.. versionadded:: 1.3.0
"""
@keyword_only
def __init__(self, inputCol=None, outputCol=None):
"""
__init__(self, inputCol=None, outputCol=None)
"""
super(Tokenizer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.Tokenizer", self.uid)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.3.0")
def setParams(self, inputCol=None, outputCol=None):
"""
setParams(self, inputCol=None, outputCol=None)
Sets params for this Tokenizer.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs]@inherit_doc
class VectorAssembler(JavaTransformer, HasInputCols, HasOutputCol, HasHandleInvalid, JavaMLReadable,
JavaMLWritable):
"""
A feature transformer that merges multiple columns into a vector column.
>>> df = spark.createDataFrame([(1, 0, 3)], ["a", "b", "c"])
>>> vecAssembler = VectorAssembler(inputCols=["a", "b", "c"], outputCol="features")
>>> vecAssembler.transform(df).head().features
DenseVector([1.0, 0.0, 3.0])
>>> vecAssembler.setParams(outputCol="freqs").transform(df).head().freqs
DenseVector([1.0, 0.0, 3.0])
>>> params = {vecAssembler.inputCols: ["b", "a"], vecAssembler.outputCol: "vector"}
>>> vecAssembler.transform(df, params).head().vector
DenseVector([0.0, 1.0])
>>> vectorAssemblerPath = temp_path + "/vector-assembler"
>>> vecAssembler.save(vectorAssemblerPath)
>>> loadedAssembler = VectorAssembler.load(vectorAssemblerPath)
>>> loadedAssembler.transform(df).head().freqs == vecAssembler.transform(df).head().freqs
True
>>> dfWithNullsAndNaNs = spark.createDataFrame(
... [(1.0, 2.0, None), (3.0, float("nan"), 4.0), (5.0, 6.0, 7.0)], ["a", "b", "c"])
>>> vecAssembler2 = VectorAssembler(inputCols=["a", "b", "c"], outputCol="features",
... handleInvalid="keep")
>>> vecAssembler2.transform(dfWithNullsAndNaNs).show()
+---+---+----+-------------+
| a| b| c| features|
+---+---+----+-------------+
|1.0|2.0|null|[1.0,2.0,NaN]|
|3.0|NaN| 4.0|[3.0,NaN,4.0]|
|5.0|6.0| 7.0|[5.0,6.0,7.0]|
+---+---+----+-------------+
...
>>> vecAssembler2.setParams(handleInvalid="skip").transform(dfWithNullsAndNaNs).show()
+---+---+---+-------------+
| a| b| c| features|
+---+---+---+-------------+
|5.0|6.0|7.0|[5.0,6.0,7.0]|
+---+---+---+-------------+
...
.. versionadded:: 1.4.0
"""
handleInvalid = Param(Params._dummy(), "handleInvalid", "How to handle invalid data (NULL " +
"and NaN values). Options are 'skip' (filter out rows with invalid " +
"data), 'error' (throw an error), or 'keep' (return relevant number " +
"of NaN in the output). Column lengths are taken from the size of ML " +
"Attribute Group, which can be set using `VectorSizeHint` in a " +
"pipeline before `VectorAssembler`. Column lengths can also be " +
"inferred from first rows of the data since it is safe to do so but " +
"only in case of 'error' or 'skip').",
typeConverter=TypeConverters.toString)
@keyword_only
def __init__(self, inputCols=None, outputCol=None, handleInvalid="error"):
"""
__init__(self, inputCols=None, outputCol=None, handleInvalid="error")
"""
super(VectorAssembler, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.VectorAssembler", self.uid)
self._setDefault(handleInvalid="error")
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, inputCols=None, outputCol=None, handleInvalid="error"):
"""
setParams(self, inputCols=None, outputCol=None, handleInvalid="error")
Sets params for this VectorAssembler.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs]@inherit_doc
class VectorIndexer(JavaEstimator, HasInputCol, HasOutputCol, HasHandleInvalid, JavaMLReadable,
JavaMLWritable):
"""
Class for indexing categorical feature columns in a dataset of `Vector`.
This has 2 usage modes:
- Automatically identify categorical features (default behavior)
- This helps process a dataset of unknown vectors into a dataset with some continuous
features and some categorical features. The choice between continuous and categorical
is based upon a maxCategories parameter.
- Set maxCategories to the maximum number of categorical any categorical feature should
have.
- E.g.: Feature 0 has unique values {-1.0, 0.0}, and feature 1 values {1.0, 3.0, 5.0}.
If maxCategories = 2, then feature 0 will be declared categorical and use indices {0, 1},
and feature 1 will be declared continuous.
- Index all features, if all features are categorical
- If maxCategories is set to be very large, then this will build an index of unique
values for all features.
- Warning: This can cause problems if features are continuous since this will collect ALL
unique values to the driver.
- E.g.: Feature 0 has unique values {-1.0, 0.0}, and feature 1 values {1.0, 3.0, 5.0}.
If maxCategories >= 3, then both features will be declared categorical.
This returns a model which can transform categorical features to use 0-based indices.
Index stability:
- This is not guaranteed to choose the same category index across multiple runs.
- If a categorical feature includes value 0, then this is guaranteed to map value 0 to
index 0. This maintains vector sparsity.
- More stability may be added in the future.
TODO: Future extensions: The following functionality is planned for the future:
- Preserve metadata in transform; if a feature's metadata is already present,
do not recompute.
- Specify certain features to not index, either via a parameter or via existing metadata.
- Add warning if a categorical feature has only 1 category.
>>> from pyspark.ml.linalg import Vectors
>>> df = spark.createDataFrame([(Vectors.dense([-1.0, 0.0]),),
... (Vectors.dense([0.0, 1.0]),), (Vectors.dense([0.0, 2.0]),)], ["a"])
>>> indexer = VectorIndexer(maxCategories=2, inputCol="a", outputCol="indexed")
>>> model = indexer.fit(df)
>>> model.transform(df).head().indexed
DenseVector([1.0, 0.0])
>>> model.numFeatures
2
>>> model.categoryMaps
{0: {0.0: 0, -1.0: 1}}
>>> indexer.setParams(outputCol="test").fit(df).transform(df).collect()[1].test
DenseVector([0.0, 1.0])
>>> params = {indexer.maxCategories: 3, indexer.outputCol: "vector"}
>>> model2 = indexer.fit(df, params)
>>> model2.transform(df).head().vector
DenseVector([1.0, 0.0])
>>> vectorIndexerPath = temp_path + "/vector-indexer"
>>> indexer.save(vectorIndexerPath)
>>> loadedIndexer = VectorIndexer.load(vectorIndexerPath)
>>> loadedIndexer.getMaxCategories() == indexer.getMaxCategories()
True
>>> modelPath = temp_path + "/vector-indexer-model"
>>> model.save(modelPath)
>>> loadedModel = VectorIndexerModel.load(modelPath)
>>> loadedModel.numFeatures == model.numFeatures
True
>>> loadedModel.categoryMaps == model.categoryMaps
True
>>> dfWithInvalid = spark.createDataFrame([(Vectors.dense([3.0, 1.0]),)], ["a"])
>>> indexer.getHandleInvalid()
'error'
>>> model3 = indexer.setHandleInvalid("skip").fit(df)
>>> model3.transform(dfWithInvalid).count()
0
>>> model4 = indexer.setParams(handleInvalid="keep", outputCol="indexed").fit(df)
>>> model4.transform(dfWithInvalid).head().indexed
DenseVector([2.0, 1.0])
.. versionadded:: 1.4.0
"""
maxCategories = Param(Params._dummy(), "maxCategories",
"Threshold for the number of values a categorical feature can take " +
"(>= 2). If a feature is found to have > maxCategories values, then " +
"it is declared continuous.", typeConverter=TypeConverters.toInt)
handleInvalid = Param(Params._dummy(), "handleInvalid", "How to handle invalid data " +
"(unseen labels or NULL values). Options are 'skip' (filter out " +
"rows with invalid data), 'error' (throw an error), or 'keep' (put " +
"invalid data in a special additional bucket, at index of the number " +
"of categories of the feature).",
typeConverter=TypeConverters.toString)
@keyword_only
def __init__(self, maxCategories=20, inputCol=None, outputCol=None, handleInvalid="error"):
"""
__init__(self, maxCategories=20, inputCol=None, outputCol=None, handleInvalid="error")
"""
super(VectorIndexer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.VectorIndexer", self.uid)
self._setDefault(maxCategories=20, handleInvalid="error")
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, maxCategories=20, inputCol=None, outputCol=None, handleInvalid="error"):
"""
setParams(self, maxCategories=20, inputCol=None, outputCol=None, handleInvalid="error")
Sets params for this VectorIndexer.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.4.0")
def setMaxCategories(self, value):
"""
Sets the value of :py:attr:`maxCategories`.
"""
return self._set(maxCategories=value)
[docs] @since("1.4.0")
def getMaxCategories(self):
"""
Gets the value of maxCategories or its default value.
"""
return self.getOrDefault(self.maxCategories)
def _create_model(self, java_model):
return VectorIndexerModel(java_model)
[docs]class VectorIndexerModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`VectorIndexer`.
Transform categorical features to use 0-based indices instead of their original values.
- Categorical features are mapped to indices.
- Continuous features (columns) are left unchanged.
This also appends metadata to the output column, marking features as Numeric (continuous),
Nominal (categorical), or Binary (either continuous or categorical).
Non-ML metadata is not carried over from the input to the output column.
This maintains vector sparsity.
.. versionadded:: 1.4.0
"""
@property
@since("1.4.0")
def numFeatures(self):
"""
Number of features, i.e., length of Vectors which this transforms.
"""
return self._call_java("numFeatures")
@property
@since("1.4.0")
def categoryMaps(self):
"""
Feature value index. Keys are categorical feature indices (column indices).
Values are maps from original features values to 0-based category indices.
If a feature is not in this map, it is treated as continuous.
"""
return self._call_java("javaCategoryMaps")
[docs]@inherit_doc
class VectorSlicer(JavaTransformer, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
This class takes a feature vector and outputs a new feature vector with a subarray
of the original features.
The subset of features can be specified with either indices (`setIndices()`)
or names (`setNames()`). At least one feature must be selected. Duplicate features
are not allowed, so there can be no overlap between selected indices and names.
The output vector will order features with the selected indices first (in the order given),
followed by the selected names (in the order given).
>>> from pyspark.ml.linalg import Vectors
>>> df = spark.createDataFrame([
... (Vectors.dense([-2.0, 2.3, 0.0, 0.0, 1.0]),),
... (Vectors.dense([0.0, 0.0, 0.0, 0.0, 0.0]),),
... (Vectors.dense([0.6, -1.1, -3.0, 4.5, 3.3]),)], ["features"])
>>> vs = VectorSlicer(inputCol="features", outputCol="sliced", indices=[1, 4])
>>> vs.transform(df).head().sliced
DenseVector([2.3, 1.0])
>>> vectorSlicerPath = temp_path + "/vector-slicer"
>>> vs.save(vectorSlicerPath)
>>> loadedVs = VectorSlicer.load(vectorSlicerPath)
>>> loadedVs.getIndices() == vs.getIndices()
True
>>> loadedVs.getNames() == vs.getNames()
True
.. versionadded:: 1.6.0
"""
indices = Param(Params._dummy(), "indices", "An array of indices to select features from " +
"a vector column. There can be no overlap with names.",
typeConverter=TypeConverters.toListInt)
names = Param(Params._dummy(), "names", "An array of feature names to select features from " +
"a vector column. These names must be specified by ML " +
"org.apache.spark.ml.attribute.Attribute. There can be no overlap with " +
"indices.", typeConverter=TypeConverters.toListString)
@keyword_only
def __init__(self, inputCol=None, outputCol=None, indices=None, names=None):
"""
__init__(self, inputCol=None, outputCol=None, indices=None, names=None)
"""
super(VectorSlicer, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.VectorSlicer", self.uid)
self._setDefault(indices=[], names=[])
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.6.0")
def setParams(self, inputCol=None, outputCol=None, indices=None, names=None):
"""
setParams(self, inputCol=None, outputCol=None, indices=None, names=None):
Sets params for this VectorSlicer.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.6.0")
def setIndices(self, value):
"""
Sets the value of :py:attr:`indices`.
"""
return self._set(indices=value)
[docs] @since("1.6.0")
def getIndices(self):
"""
Gets the value of indices or its default value.
"""
return self.getOrDefault(self.indices)
[docs] @since("1.6.0")
def setNames(self, value):
"""
Sets the value of :py:attr:`names`.
"""
return self._set(names=value)
[docs] @since("1.6.0")
def getNames(self):
"""
Gets the value of names or its default value.
"""
return self.getOrDefault(self.names)
[docs]@inherit_doc
@ignore_unicode_prefix
class Word2Vec(JavaEstimator, HasStepSize, HasMaxIter, HasSeed, HasInputCol, HasOutputCol,
JavaMLReadable, JavaMLWritable):
"""
Word2Vec trains a model of `Map(String, Vector)`, i.e. transforms a word into a code for further
natural language processing or machine learning process.
>>> sent = ("a b " * 100 + "a c " * 10).split(" ")
>>> doc = spark.createDataFrame([(sent,), (sent,)], ["sentence"])
>>> word2Vec = Word2Vec(vectorSize=5, seed=42, inputCol="sentence", outputCol="model")
>>> model = word2Vec.fit(doc)
>>> model.getVectors().show()
+----+--------------------+
|word| vector|
+----+--------------------+
| a|[0.09461779892444...|
| b|[1.15474212169647...|
| c|[-0.3794820010662...|
+----+--------------------+
...
>>> model.findSynonymsArray("a", 2)
[(u'b', 0.25053444504737854), (u'c', -0.6980510950088501)]
>>> from pyspark.sql.functions import format_number as fmt
>>> model.findSynonyms("a", 2).select("word", fmt("similarity", 5).alias("similarity")).show()
+----+----------+
|word|similarity|
+----+----------+
| b| 0.25053|
| c| -0.69805|
+----+----------+
...
>>> model.transform(doc).head().model
DenseVector([0.5524, -0.4995, -0.3599, 0.0241, 0.3461])
>>> word2vecPath = temp_path + "/word2vec"
>>> word2Vec.save(word2vecPath)
>>> loadedWord2Vec = Word2Vec.load(word2vecPath)
>>> loadedWord2Vec.getVectorSize() == word2Vec.getVectorSize()
True
>>> loadedWord2Vec.getNumPartitions() == word2Vec.getNumPartitions()
True
>>> loadedWord2Vec.getMinCount() == word2Vec.getMinCount()
True
>>> modelPath = temp_path + "/word2vec-model"
>>> model.save(modelPath)
>>> loadedModel = Word2VecModel.load(modelPath)
>>> loadedModel.getVectors().first().word == model.getVectors().first().word
True
>>> loadedModel.getVectors().first().vector == model.getVectors().first().vector
True
.. versionadded:: 1.4.0
"""
vectorSize = Param(Params._dummy(), "vectorSize",
"the dimension of codes after transforming from words",
typeConverter=TypeConverters.toInt)
numPartitions = Param(Params._dummy(), "numPartitions",
"number of partitions for sentences of words",
typeConverter=TypeConverters.toInt)
minCount = Param(Params._dummy(), "minCount",
"the minimum number of times a token must appear to be included in the " +
"word2vec model's vocabulary", typeConverter=TypeConverters.toInt)
windowSize = Param(Params._dummy(), "windowSize",
"the window size (context words from [-window, window]). Default value is 5",
typeConverter=TypeConverters.toInt)
maxSentenceLength = Param(Params._dummy(), "maxSentenceLength",
"Maximum length (in words) of each sentence in the input data. " +
"Any sentence longer than this threshold will " +
"be divided into chunks up to the size.",
typeConverter=TypeConverters.toInt)
@keyword_only
def __init__(self, vectorSize=100, minCount=5, numPartitions=1, stepSize=0.025, maxIter=1,
seed=None, inputCol=None, outputCol=None, windowSize=5, maxSentenceLength=1000):
"""
__init__(self, vectorSize=100, minCount=5, numPartitions=1, stepSize=0.025, maxIter=1, \
seed=None, inputCol=None, outputCol=None, windowSize=5, maxSentenceLength=1000)
"""
super(Word2Vec, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.Word2Vec", self.uid)
self._setDefault(vectorSize=100, minCount=5, numPartitions=1, stepSize=0.025, maxIter=1,
windowSize=5, maxSentenceLength=1000)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.4.0")
def setParams(self, vectorSize=100, minCount=5, numPartitions=1, stepSize=0.025, maxIter=1,
seed=None, inputCol=None, outputCol=None, windowSize=5, maxSentenceLength=1000):
"""
setParams(self, minCount=5, numPartitions=1, stepSize=0.025, maxIter=1, seed=None, \
inputCol=None, outputCol=None, windowSize=5, maxSentenceLength=1000)
Sets params for this Word2Vec.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.4.0")
def setVectorSize(self, value):
"""
Sets the value of :py:attr:`vectorSize`.
"""
return self._set(vectorSize=value)
[docs] @since("1.4.0")
def getVectorSize(self):
"""
Gets the value of vectorSize or its default value.
"""
return self.getOrDefault(self.vectorSize)
[docs] @since("1.4.0")
def setNumPartitions(self, value):
"""
Sets the value of :py:attr:`numPartitions`.
"""
return self._set(numPartitions=value)
[docs] @since("1.4.0")
def getNumPartitions(self):
"""
Gets the value of numPartitions or its default value.
"""
return self.getOrDefault(self.numPartitions)
[docs] @since("1.4.0")
def setMinCount(self, value):
"""
Sets the value of :py:attr:`minCount`.
"""
return self._set(minCount=value)
[docs] @since("1.4.0")
def getMinCount(self):
"""
Gets the value of minCount or its default value.
"""
return self.getOrDefault(self.minCount)
[docs] @since("2.0.0")
def setWindowSize(self, value):
"""
Sets the value of :py:attr:`windowSize`.
"""
return self._set(windowSize=value)
[docs] @since("2.0.0")
def getWindowSize(self):
"""
Gets the value of windowSize or its default value.
"""
return self.getOrDefault(self.windowSize)
[docs] @since("2.0.0")
def setMaxSentenceLength(self, value):
"""
Sets the value of :py:attr:`maxSentenceLength`.
"""
return self._set(maxSentenceLength=value)
[docs] @since("2.0.0")
def getMaxSentenceLength(self):
"""
Gets the value of maxSentenceLength or its default value.
"""
return self.getOrDefault(self.maxSentenceLength)
def _create_model(self, java_model):
return Word2VecModel(java_model)
[docs]class Word2VecModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`Word2Vec`.
.. versionadded:: 1.4.0
"""
[docs] @since("1.5.0")
def getVectors(self):
"""
Returns the vector representation of the words as a dataframe
with two fields, word and vector.
"""
return self._call_java("getVectors")
[docs] @since("1.5.0")
def findSynonyms(self, word, num):
"""
Find "num" number of words closest in similarity to "word".
word can be a string or vector representation.
Returns a dataframe with two fields word and similarity (which
gives the cosine similarity).
"""
if not isinstance(word, basestring):
word = _convert_to_vector(word)
return self._call_java("findSynonyms", word, num)
[docs] @since("2.3.0")
def findSynonymsArray(self, word, num):
"""
Find "num" number of words closest in similarity to "word".
word can be a string or vector representation.
Returns an array with two fields word and similarity (which
gives the cosine similarity).
"""
if not isinstance(word, basestring):
word = _convert_to_vector(word)
tuples = self._java_obj.findSynonymsArray(word, num)
return list(map(lambda st: (st._1(), st._2()), list(tuples)))
[docs]@inherit_doc
class PCA(JavaEstimator, HasInputCol, HasOutputCol, JavaMLReadable, JavaMLWritable):
"""
PCA trains a model to project vectors to a lower dimensional space of the
top :py:attr:`k` principal components.
>>> from pyspark.ml.linalg import Vectors
>>> data = [(Vectors.sparse(5, [(1, 1.0), (3, 7.0)]),),
... (Vectors.dense([2.0, 0.0, 3.0, 4.0, 5.0]),),
... (Vectors.dense([4.0, 0.0, 0.0, 6.0, 7.0]),)]
>>> df = spark.createDataFrame(data,["features"])
>>> pca = PCA(k=2, inputCol="features", outputCol="pca_features")
>>> model = pca.fit(df)
>>> model.transform(df).collect()[0].pca_features
DenseVector([1.648..., -4.013...])
>>> model.explainedVariance
DenseVector([0.794..., 0.205...])
>>> pcaPath = temp_path + "/pca"
>>> pca.save(pcaPath)
>>> loadedPca = PCA.load(pcaPath)
>>> loadedPca.getK() == pca.getK()
True
>>> modelPath = temp_path + "/pca-model"
>>> model.save(modelPath)
>>> loadedModel = PCAModel.load(modelPath)
>>> loadedModel.pc == model.pc
True
>>> loadedModel.explainedVariance == model.explainedVariance
True
.. versionadded:: 1.5.0
"""
k = Param(Params._dummy(), "k", "the number of principal components",
typeConverter=TypeConverters.toInt)
@keyword_only
def __init__(self, k=None, inputCol=None, outputCol=None):
"""
__init__(self, k=None, inputCol=None, outputCol=None)
"""
super(PCA, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.PCA", self.uid)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("1.5.0")
def setParams(self, k=None, inputCol=None, outputCol=None):
"""
setParams(self, k=None, inputCol=None, outputCol=None)
Set params for this PCA.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("1.5.0")
def setK(self, value):
"""
Sets the value of :py:attr:`k`.
"""
return self._set(k=value)
[docs] @since("1.5.0")
def getK(self):
"""
Gets the value of k or its default value.
"""
return self.getOrDefault(self.k)
def _create_model(self, java_model):
return PCAModel(java_model)
[docs]class PCAModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
Model fitted by :py:class:`PCA`. Transforms vectors to a lower dimensional space.
.. versionadded:: 1.5.0
"""
@property
@since("2.0.0")
def pc(self):
"""
Returns a principal components Matrix.
Each column is one principal component.
"""
return self._call_java("pc")
@property
@since("2.0.0")
def explainedVariance(self):
"""
Returns a vector of proportions of variance
explained by each principal component.
"""
return self._call_java("explainedVariance")
[docs]@inherit_doc
class ChiSqSelector(JavaEstimator, HasFeaturesCol, HasOutputCol, HasLabelCol, JavaMLReadable,
JavaMLWritable):
"""
.. note:: Experimental
Chi-Squared feature selection, which selects categorical features to use for predicting a
categorical label.
The selector supports different selection methods: `numTopFeatures`, `percentile`, `fpr`,
`fdr`, `fwe`.
* `numTopFeatures` chooses a fixed number of top features according to a chi-squared test.
* `percentile` is similar but chooses a fraction of all features
instead of a fixed number.
* `fpr` chooses all features whose p-values are below a threshold,
thus controlling the false positive rate of selection.
* `fdr` uses the `Benjamini-Hochberg procedure <https://en.wikipedia.org/wiki/
False_discovery_rate#Benjamini.E2.80.93Hochberg_procedure>`_
to choose all features whose false discovery rate is below a threshold.
* `fwe` chooses all features whose p-values are below a threshold. The threshold is scaled by
1/numFeatures, thus controlling the family-wise error rate of selection.
By default, the selection method is `numTopFeatures`, with the default number of top features
set to 50.
>>> from pyspark.ml.linalg import Vectors
>>> df = spark.createDataFrame(
... [(Vectors.dense([0.0, 0.0, 18.0, 1.0]), 1.0),
... (Vectors.dense([0.0, 1.0, 12.0, 0.0]), 0.0),
... (Vectors.dense([1.0, 0.0, 15.0, 0.1]), 0.0)],
... ["features", "label"])
>>> selector = ChiSqSelector(numTopFeatures=1, outputCol="selectedFeatures")
>>> model = selector.fit(df)
>>> model.transform(df).head().selectedFeatures
DenseVector([18.0])
>>> model.selectedFeatures
[2]
>>> chiSqSelectorPath = temp_path + "/chi-sq-selector"
>>> selector.save(chiSqSelectorPath)
>>> loadedSelector = ChiSqSelector.load(chiSqSelectorPath)
>>> loadedSelector.getNumTopFeatures() == selector.getNumTopFeatures()
True
>>> modelPath = temp_path + "/chi-sq-selector-model"
>>> model.save(modelPath)
>>> loadedModel = ChiSqSelectorModel.load(modelPath)
>>> loadedModel.selectedFeatures == model.selectedFeatures
True
.. versionadded:: 2.0.0
"""
selectorType = Param(Params._dummy(), "selectorType",
"The selector type of the ChisqSelector. " +
"Supported options: numTopFeatures (default), percentile, fpr, fdr, fwe.",
typeConverter=TypeConverters.toString)
numTopFeatures = \
Param(Params._dummy(), "numTopFeatures",
"Number of features that selector will select, ordered by ascending p-value. " +
"If the number of features is < numTopFeatures, then this will select " +
"all features.", typeConverter=TypeConverters.toInt)
percentile = Param(Params._dummy(), "percentile", "Percentile of features that selector " +
"will select, ordered by ascending p-value.",
typeConverter=TypeConverters.toFloat)
fpr = Param(Params._dummy(), "fpr", "The highest p-value for features to be kept.",
typeConverter=TypeConverters.toFloat)
fdr = Param(Params._dummy(), "fdr", "The upper bound of the expected false discovery rate.",
typeConverter=TypeConverters.toFloat)
fwe = Param(Params._dummy(), "fwe", "The upper bound of the expected family-wise error rate.",
typeConverter=TypeConverters.toFloat)
@keyword_only
def __init__(self, numTopFeatures=50, featuresCol="features", outputCol=None,
labelCol="label", selectorType="numTopFeatures", percentile=0.1, fpr=0.05,
fdr=0.05, fwe=0.05):
"""
__init__(self, numTopFeatures=50, featuresCol="features", outputCol=None, \
labelCol="label", selectorType="numTopFeatures", percentile=0.1, fpr=0.05, \
fdr=0.05, fwe=0.05)
"""
super(ChiSqSelector, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.ChiSqSelector", self.uid)
self._setDefault(numTopFeatures=50, selectorType="numTopFeatures", percentile=0.1,
fpr=0.05, fdr=0.05, fwe=0.05)
kwargs = self._input_kwargs
self.setParams(**kwargs)
[docs] @keyword_only
@since("2.0.0")
def setParams(self, numTopFeatures=50, featuresCol="features", outputCol=None,
labelCol="labels", selectorType="numTopFeatures", percentile=0.1, fpr=0.05,
fdr=0.05, fwe=0.05):
"""
setParams(self, numTopFeatures=50, featuresCol="features", outputCol=None, \
labelCol="labels", selectorType="numTopFeatures", percentile=0.1, fpr=0.05, \
fdr=0.05, fwe=0.05)
Sets params for this ChiSqSelector.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("2.1.0")
def setSelectorType(self, value):
"""
Sets the value of :py:attr:`selectorType`.
"""
return self._set(selectorType=value)
[docs] @since("2.1.0")
def getSelectorType(self):
"""
Gets the value of selectorType or its default value.
"""
return self.getOrDefault(self.selectorType)
[docs] @since("2.0.0")
def setNumTopFeatures(self, value):
"""
Sets the value of :py:attr:`numTopFeatures`.
Only applicable when selectorType = "numTopFeatures".
"""
return self._set(numTopFeatures=value)
[docs] @since("2.0.0")
def getNumTopFeatures(self):
"""
Gets the value of numTopFeatures or its default value.
"""
return self.getOrDefault(self.numTopFeatures)
[docs] @since("2.1.0")
def setPercentile(self, value):
"""
Sets the value of :py:attr:`percentile`.
Only applicable when selectorType = "percentile".
"""
return self._set(percentile=value)
[docs] @since("2.1.0")
def getPercentile(self):
"""
Gets the value of percentile or its default value.
"""
return self.getOrDefault(self.percentile)
[docs] @since("2.1.0")
def setFpr(self, value):
"""
Sets the value of :py:attr:`fpr`.
Only applicable when selectorType = "fpr".
"""
return self._set(fpr=value)
[docs] @since("2.1.0")
def getFpr(self):
"""
Gets the value of fpr or its default value.
"""
return self.getOrDefault(self.fpr)
[docs] @since("2.2.0")
def setFdr(self, value):
"""
Sets the value of :py:attr:`fdr`.
Only applicable when selectorType = "fdr".
"""
return self._set(fdr=value)
[docs] @since("2.2.0")
def getFdr(self):
"""
Gets the value of fdr or its default value.
"""
return self.getOrDefault(self.fdr)
[docs] @since("2.2.0")
def setFwe(self, value):
"""
Sets the value of :py:attr:`fwe`.
Only applicable when selectorType = "fwe".
"""
return self._set(fwe=value)
[docs] @since("2.2.0")
def getFwe(self):
"""
Gets the value of fwe or its default value.
"""
return self.getOrDefault(self.fwe)
def _create_model(self, java_model):
return ChiSqSelectorModel(java_model)
[docs]class ChiSqSelectorModel(JavaModel, JavaMLReadable, JavaMLWritable):
"""
.. note:: Experimental
Model fitted by :py:class:`ChiSqSelector`.
.. versionadded:: 2.0.0
"""
@property
@since("2.0.0")
def selectedFeatures(self):
"""
List of indices to select (filter).
"""
return self._call_java("selectedFeatures")
[docs]@inherit_doc
class VectorSizeHint(JavaTransformer, HasInputCol, HasHandleInvalid, JavaMLReadable,
JavaMLWritable):
"""
.. note:: Experimental
A feature transformer that adds size information to the metadata of a vector column.
VectorAssembler needs size information for its input columns and cannot be used on streaming
dataframes without this metadata.
.. note:: VectorSizeHint modifies `inputCol` to include size metadata and does not have an
outputCol.
>>> from pyspark.ml.linalg import Vectors
>>> from pyspark.ml import Pipeline, PipelineModel
>>> data = [(Vectors.dense([1., 2., 3.]), 4.)]
>>> df = spark.createDataFrame(data, ["vector", "float"])
>>>
>>> sizeHint = VectorSizeHint(inputCol="vector", size=3, handleInvalid="skip")
>>> vecAssembler = VectorAssembler(inputCols=["vector", "float"], outputCol="assembled")
>>> pipeline = Pipeline(stages=[sizeHint, vecAssembler])
>>>
>>> pipelineModel = pipeline.fit(df)
>>> pipelineModel.transform(df).head().assembled
DenseVector([1.0, 2.0, 3.0, 4.0])
>>> vectorSizeHintPath = temp_path + "/vector-size-hint-pipeline"
>>> pipelineModel.save(vectorSizeHintPath)
>>> loadedPipeline = PipelineModel.load(vectorSizeHintPath)
>>> loaded = loadedPipeline.transform(df).head().assembled
>>> expected = pipelineModel.transform(df).head().assembled
>>> loaded == expected
True
.. versionadded:: 2.3.0
"""
size = Param(Params._dummy(), "size", "Size of vectors in column.",
typeConverter=TypeConverters.toInt)
handleInvalid = Param(Params._dummy(), "handleInvalid",
"How to handle invalid vectors in inputCol. Invalid vectors include "
"nulls and vectors with the wrong size. The options are `skip` (filter "
"out rows with invalid vectors), `error` (throw an error) and "
"`optimistic` (do not check the vector size, and keep all rows). "
"`error` by default.",
TypeConverters.toString)
@keyword_only
def __init__(self, inputCol=None, size=None, handleInvalid="error"):
"""
__init__(self, inputCol=None, size=None, handleInvalid="error")
"""
super(VectorSizeHint, self).__init__()
self._java_obj = self._new_java_obj("org.apache.spark.ml.feature.VectorSizeHint", self.uid)
self._setDefault(handleInvalid="error")
self.setParams(**self._input_kwargs)
[docs] @keyword_only
@since("2.3.0")
def setParams(self, inputCol=None, size=None, handleInvalid="error"):
"""
setParams(self, inputCol=None, size=None, handleInvalid="error")
Sets params for this VectorSizeHint.
"""
kwargs = self._input_kwargs
return self._set(**kwargs)
[docs] @since("2.3.0")
def getSize(self):
""" Gets size param, the size of vectors in `inputCol`."""
return self.getOrDefault(self.size)
[docs] @since("2.3.0")
def setSize(self, value):
""" Sets size param, the size of vectors in `inputCol`."""
return self._set(size=value)
if __name__ == "__main__":
import doctest
import tempfile
import pyspark.ml.feature
from pyspark.sql import Row, SparkSession
globs = globals().copy()
features = pyspark.ml.feature.__dict__.copy()
globs.update(features)
# The small batch size here ensures that we see multiple batches,
# even in these small test examples:
spark = SparkSession.builder\
.master("local[2]")\
.appName("ml.feature tests")\
.getOrCreate()
sc = spark.sparkContext
globs['sc'] = sc
globs['spark'] = spark
testData = sc.parallelize([Row(id=0, label="a"), Row(id=1, label="b"),
Row(id=2, label="c"), Row(id=3, label="a"),
Row(id=4, label="a"), Row(id=5, label="c")], 2)
globs['stringIndDf'] = spark.createDataFrame(testData)
temp_path = tempfile.mkdtemp()
globs['temp_path'] = temp_path
try:
(failure_count, test_count) = doctest.testmod(globs=globs, optionflags=doctest.ELLIPSIS)
spark.stop()
finally:
from shutil import rmtree
try:
rmtree(temp_path)
except OSError:
pass
if failure_count:
sys.exit(-1)