Set-Dns
Syntax
Set-DnsServerZoneTransferPolicy
[-PassThru]
[-ComputerName <String>]
[-ClientSubnet <String>]
[-Condition <String>]
[-InternetProtocol <String>]
[-Name] <String>
[-ProcessingOrder <UInt32>]
[-ServerInterfaceIP <String>]
[-TimeOfDay <String>]
[-TransportProtocol <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]Set-DnsServerZoneTransferPolicy
[-PassThru]
[-ComputerName <String>]
[-ZoneName] <String>
[-ClientSubnet <String>]
[-Condition <String>]
[-InternetProtocol <String>]
[-Name] <String>
[-ProcessingOrder <UInt32>]
[-ServerInterfaceIP <String>]
[-TimeOfDay <String>]
[-TransportProtocol <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]Set-DnsServerZoneTransferPolicy
[-PassThru]
[-ComputerName <String>]
[-InputObject] <CimInstance>
[[-ZoneName] <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]Description
The Set-DnsServerZoneTransferPolicy cmdlet updates a zone transfer policy on a Domain Name System (DNS) server.
Examples
Example 1: Update a zone transfer policy
PS C:\> Set-DnsServerZoneTransferPolicy -Name "InternalTransfers" -TransportProtocol "NE,TCP" -ServerInterfaceIP $NullThis command updates the zone transfer policy named InternalTransfers. The command modifies the transport protocol and the server interface IP address criterial. For the server interface IP address, the command specifies $Null, which removes the previously set criterion.
Required Parameters
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
| Type: | CimInstance |
| Position: | 1 |
| Default value: | None |
| Accept pipeline input: | True (ByValue) |
| Accept wildcard characters: | False |
Specifies the name of the policy to update.
| Type: | String |
| Position: | 1 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Specifies the name of a DNS zone on which the zone level policy exists. The zone must exist on the DNS server.
| Type: | String |
| Position: | 2 |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Optional Parameters
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the
*-Job
cmdlets.
To get the job results, use the
Receive-Job
cmdlet.
For more information about Windows PowerShell background jobs, see about_Jobs .
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Specifies the client subnet criterion. Specify a criterion in the following format:
operator, value01, value02, . . . , operator, value03, value04, . . .
The operator is either EQ or NE. You can specify no more than one of each operator in a criterion.
The policy treats values that follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the subnet of the zone transfer matches one of the EQ values and does not match any of the NE values.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Specifies a remote DNS server. You can specify an IP address or any value that resolves to an IP address, such as an FQDN, host name, or NETBIOS name.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Specifies how the policy treats multiple criteria. The acceptable values for this parameter are:
- OR. The policy evaluates criteria as multiple assertions which are logically combined (OR'd).
- AND. The policy evaluates criteria as multiple assertions which are logically differenced (AND'd).
The default value is AND.
| Type: | String |
| Parameter Sets: | AND, OR |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Specifies the Internet Protocol criterion. Specify a criterion in the following format:
operator, value01, value02, . . . , operator, value03, value04, . . .
The operator is either EQ or NE. You can specify no more than one of each operator in a criterion.
The policy treats values that follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the IP address of the zone transfer matches one of the EQ values and does not match any of the NE values.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Specifies the precedence of the policy. Higher integer values have lower precedence. By default, this cmdlet adds a new policy as the lowest precedence.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Specifies the IP address of the server interface on which the DNS server listens. Specify a criterion in the following format:
operator, value01, value02, . . . , operator, value03, value04, . . .
The operator is either EQ or NE. You can specify no more than one of each operator in the criterion.
The policy treats values the follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the IP address of the interface matches one of the EQ values and does not match any of the NE values.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of
0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Specifies the time of day criterion. Specify a criterion in the following format:
operator, value01, value02, . . . , operator, value03, value04, . . .
The operator is either EQ or NE. You can specify no more than one of each operator in the criterion.
The policy treats values the follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the time of day of the zone transfer matches one of the EQ values and does not match any of the NE values.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Specifies the transport protocol criterion. Specify a criterion in the following format:
operator, value01, value02, . . . , operator, value03, value04, . . .
The operator is either EQ or NE. You can specify no more than one of each operator in the string.
The policy treats values the follow the EQ operator as multiple assertions which are logically combined (OR'd). The policy treats values that follow the NE operator as multiple assertions which are logically differenced (AND'd). The criterion is satisfied if the transport protocol of the zone transfer matches one of the EQ values and does not match any of the NE values.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | False |
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Outputs
Microsoft.Management.Infrastructure.CimInstance#DnsServerPolicy