Integrate with an LDAP Directory

Estimated reading time: 12 minutes

Docker UCP integrates with LDAP directory services, so that you can manage users and groups from your organization’s directory and it will automatically propagate that information to UCP and DTR.

If you enable LDAP, UCP uses a remote directory server to create users automatically, and all logins are forwarded to the directory server.

When you switch from built-in authentication to LDAP authentication, all manually created users whose usernames don’t match any LDAP search results are still available.

When you enable LDAP authentication, you can choose whether UCP creates user accounts only when users log in for the first time. Select the Just-In-Time User Provisioning option to ensure that the only LDAP accounts that exist in UCP are those that have had a user log in to UCP.

How UCP integrates with LDAP

You control how UCP integrates with LDAP by creating searches for users. You can specify multiple search configurations, and you can specify multiple LDAP servers to integrate with. Searches start with the Base DN, which is the distinguished name of the node in the LDAP directory tree where the search starts looking for users.

Access LDAP settings by navigating to the Authentication & Authorization page in the UCP web UI. There are two sections for controlling LDAP searches and servers.

  • LDAP user search configurations: This is the section of the Authentication & Authorization page where you specify search parameters, like Base DN, scope, filter, the username attribute, and the full name attribute. These searches are stored in a list, and the ordering may be important, depending on your search configuration.
  • LDAP server: This is the section where you specify the URL of an LDAP server, TLS configuration, and credentials for doing the search requests. Also, you provide a domain for all servers but the first one. The first server is considered the default domain server. Any others are associated with the domain that you specify in the page.

Here’s what happens when UCP synchronizes with LDAP:

  1. UCP creates a set of search results by iterating over each of the user search configs, in the order that you specify.
  2. UCP choses an LDAP server from the list of domain servers by considering the Base DN from the user search config and selecting the domain server that has the longest domain suffix match.
  3. If no domain server has a domain suffix that matches the Base DN from the search config, UCP uses the default domain server.
  4. UCP combines the search results into a list of users and creates UCP accounts for them. If the Just-In-Time User Provisioning option is set, user accounts are created only when users first log in.

The domain server to use is determined by the Base DN in each search config. UCP doesn’t perform search requests against each of the domain servers, only the one which has the longest matching domain suffix, or the default if there’s no match.

Here’s an example. Let’s say we have three LDAP domain servers:

Domain Server URL
default ldaps://ldap.example.com
dc=subsidiary1,dc=com ldaps://ldap.subsidiary1.com
dc=subsidiary2,dc=subsidiary1,dc=com ldaps://ldap.subsidiary2.com

Here are three user search configs with the following Base DNs:

  • baseDN=ou=people,dc=subsidiary1,dc=com

    For this search config, dc=subsidiary1,dc=com is the only server with a domain which is a suffix, so UCP uses the server ldaps://ldap.subsidiary1.com for the search request.

  • baseDN=ou=product,dc=subsidiary2,dc=subsidiary1,dc=com

    For this search config, two of the domain servers have a domain which is a suffix of this base DN, but dc=subsidiary2,dc=subsidiary1,dc=com is the longer of the two, so UCP uses the server ldaps://ldap.subsidiary2.com for the search request.

  • baseDN=ou=eng,dc=example,dc=com

    For this search config, there is no server with a domain specified which is a suffix of this base DN, so UCP uses the default server, ldaps://ldap.example.com, for the search request.

If there are username collisions for the search results between domains, UCP uses only the first search result, so the ordering of the user search configs may be important. For example, if both the first and third user search configs result in a record with the username jane.doe, the first has higher precedence and the second is ignored. For this reason, it’s important to choose a username attribute that’s unique for your users across all domains.

Because names may collide, it’s a good idea to use something unique to the subsidiary, like the email address for each person. Users can log in with the email address, for example, jane.doe@subsidiary1.com.

Configure the LDAP integration

To configure UCP to create and authenticate users by using an LDAP directory, go to the UCP web UI, navigate to the Admin Settings page and click Authentication & Authorization to select the method used to create and authenticate users.

In the LDAP Enabled section, click Yes to The LDAP settings appear. Now configure your LDAP directory integration.

Default role for all private collections

Use this setting to change the default permissions of new users.

Click the dropdown to select the permission level that UCP assigns by default to the private collections of new users. For example, if you change the value to View Only, all users who log in for the first time after the setting is changed have View Only access to their private collections, but permissions remain unchanged for all existing users. Learn more about permission levels.

LDAP enabled

Click Yes to enable integrating UCP users and teams with LDAP servers.

LDAP server

Field Description
LDAP server URL The URL where the LDAP server can be reached.
Reader DN The distinguished name of the LDAP account used for searching entries in the LDAP server. As a best practice, this should be an LDAP read-only user.
Reader password The password of the account used for searching entries in the LDAP server.
Use Start TLS Whether to authenticate/encrypt the connection after connecting to the LDAP server over TCP. If you set the LDAP Server URL field with ldaps://, this field is ignored.
Skip TLS verification Whether to verify the LDAP server certificate when using TLS. The connection is still encrypted but vulnerable to man-in-the-middle attacks.
No simple pagination If your LDAP server doesn’t support pagination.
Just-In-Time User Provisioning Whether to create user accounts only when users log in for the first time. The default value of true is recommended. If you upgraded from UCP 2.0.x, the default is false.

Click Confirm to add your LDAP domain.

To integrate with more LDAP servers, click Add LDAP Domain.

LDAP user search configurations

Field Description  
Base DN The distinguished name of the node in the directory tree where the search should start looking for users.  
Username attribute The LDAP attribute to use as username on UCP. Only user entries with a valid username will be created. A valid username is no longer than 100 characters and does not contain any unprintable characters, whitespace characters, or any of the following characters: / \ [ ] : ; | = , + * ? < > ' ".  
Full name attribute The LDAP attribute to use as the user’s full name for display purposes. If left empty, UCP will not create new users with a full name value.  
Filter The LDAP search filter used to find users. If you leave this field empty, all directory entries in the search scope with valid username attributes are created as users.  
Search subtree instead of just one level Whether to perform the LDAP search on a single level of the LDAP tree, or search through the full LDAP tree starting at the Base DN.  
Select Group Members Whether to further filter users by selecting those who are also members of a specific group on the directory server. This feature is helpful if the LDAP server does not support memberOf search filters.  
Iterate through group members If Select Group Members is selected, this option searches for users by first iterating over the target group’s membership, making a separate LDAP query for each member, as opposed to first querying for all users which match the above search query and intersecting those with the set of group members. This option can be more efficient in situations where the number of members of the target group is significantly smaller than the number of users which would match the above search filter, or if your directory server does not support simple pagination of search results.  
Group DN If Select Group Members is selected, this specifies the distinguished name of the group from which to select users.  
Group Member Attribute If Select Group Members is selected, the value of this group attribute corresponds to the distinguished names of the members of the group.  

To configure more user search queries, click Add LDAP User Search Configuration again. This is useful in cases where users may be found in multiple distinct subtrees of your organization’s directory. Any user entry which matches at least one of the search configurations will be synced as a user.

LDAP test login

Field Description
Username An LDAP username for testing authentication to this application. This value corresponds with the Username Attribute specified in the LDAP user search configurations section.
Password The user’s password used to authenticate (BIND) to the directory server.

Before you save the configuration changes, you should test that the integration is correctly configured. You can do this by providing the credentials of an LDAP user, and clicking the Test button.

LDAP sync configuration

Field Description
Sync interval The interval, in hours, to synchronize users between UCP and the LDAP server. When the synchronization job runs, new users found in the LDAP server are created in UCP with the default permission level. UCP users that don’t exist in the LDAP server become inactive.
Enable sync of admin users This option specifies that system admins should be synced directly with members of a group in your organization’s LDAP directory. The admins will be synced to match the membership of the group. The configured recovery admin user will also remain a system admin.

Once you’ve configured the LDAP integration, UCP synchronizes users based on the interval you’ve defined starting at the top of the hour. When the synchronization runs, UCP stores logs that can help you troubleshoot when something goes wrong.

You can also manually synchronize users by clicking Sync Now.

Revoke user access

When a user is removed from LDAP, the effect on the user’s UCP account depends on the Just-In-Time User Provisioning setting:

  • Just-In-Time User Provisioning is false: Users deleted from LDAP become inactive in UCP after the next LDAP synchronization runs.
  • Just-In-Time User Provisioning is true: Users deleted from LDAP can’t authenticate, but their UCP accounts remain active. This means that they can use their client bundles to run commands. To prevent this, deactivate their UCP user accounts.

Data synced from your organization’s LDAP directory

UCP saves a minimum amount of user data required to operate. This includes the value of the username and full name attributes that you have specified in the configuration as well as the distinguished name of each synced user. UCP does not store any additional data from the directory server.

Sync teams

UCP enables syncing teams with a search query or group in your organization’s LDAP directory. Sync team members with your organization’s LDAP directory.

Where to go next

Rate this page:

 
0
 
0