Many classes have shortcut names used when creating (instantiating) a class with a
configuration object. The shortcut name is referred to as an alias (or xtype if the
class extends Ext.Component). The alias/xtype is listed next to the class name of
applicable classes for quick reference.
Framework classes or their members may be specified as private or protected. Else,
the class / member is public. Public, protected, and private are access
descriptors used to convey how and when the class or class member should be used.
Public classes and class members are available for use by any other class or application code and may be relied upon as a stable and persistent within major product versions. Public classes and members may safely be extended via a subclass.
Protected class members are stable public members intended to be used by the
owning class or its subclasses. Protected members may safely be extended via a subclass.
Private classes and class members are used internally by the framework and are not intended to be used by application developers. Private classes and members may change or be omitted from the framework at any time without notice and should not be relied upon in application logic.
static label next to the
method name. *See Static below.Below is an example class member that we can disect to show the syntax of a class member (the lookupComponent method as viewed from the Ext.button.Button class in this case).
Called when a raw config object is added to this container either during initialization of the items config, or when new items are added), or {@link #insert inserted.
This method converts the passed object into an instanced child component.
This may be overridden in subclasses when special processing needs to be applied to child creation.
item : Object
The config object being added.
The component to be added.
Let's look at each part of the member row:
lookupComponent in this example)( item ) in this example)Ext.Component in this case). This may be omitted for methods that do not
return anything other than undefined or may display as multiple possible values
separated by a forward slash / signifying that what is returned may depend on the
results of the method call (i.e. a method may return a Component if a get method calls is
successful or false if unsuccessful which would be displayed as
Ext.Component/Boolean).PROTECTED in
this example - see the Flags section below)Ext.container.Container in this example). The source
class will be displayed as a blue link if the member originates from the current class
and gray if it is inherited from an ancestor or mixed-in class.view source in the example)item : Object in the example).undefined a "Returns" section
will note the type of class or object returned and a description (Ext.Component in the
example)Available since 3.4.0 - not pictured in
the example) just after the member descriptionDefaults to: false)The API documentation uses a number of flags to further commnicate the class member's function and intent. The label may be represented by a text label, an abbreviation, or an icon.
classInstance.method1().method2().etc();false is returned from
an event handler- Indicates a framework class
- A singleton framework class. *See the singleton flag for more information
- A component-type framework class (any class within the Ext JS framework that extends Ext.Component)
- Indicates that the class, member, or guide is new in the currently viewed version
- Indicates a class member of type config
- Indicates a class member of type property
- Indicates a class member of type
method
- Indicates a class member of type event
- Indicates a class member of type
theme variable
- Indicates a class member of type
theme mixin
- Indicates that the class, member, or guide is new in the currently viewed version
Just below the class name on an API doc page is a row of buttons corresponding to the types of members owned by the current class. Each button shows a count of members by type (this count is updated as filters are applied). Clicking the button will navigate you to that member section. Hovering over the member-type button will reveal a popup menu of all members of that type for quick navigation.
Getting and setter methods that correlate to a class config option will show up in the methods section as well as in the configs section of both the API doc and the member-type menus just beneath the config they work with. The getter and setter method documentation will be found in the config row for easy reference.
Your page history is kept in localstorage and displayed (using the available real estate) just below the top title bar. By default, the only search results shown are the pages matching the product / version you're currently viewing. You can expand what is displayed by clicking on the button on the right-hand side of the history bar and choosing the "All" radio option. This will show all recent pages in the history bar for all products / versions.
Within the history config menu you will also see a listing of your recent page visits. The results are filtered by the "Current Product / Version" and "All" radio options. Clicking on the button will clear the history bar as well as the history kept in local storage.
If "All" is selected in the history config menu the checkbox option for "Show product details in the history bar" will be enabled. When checked, the product/version for each historic page will show alongside the page name in the history bar. Hovering the cursor over the page names in the history bar will also show the product/version as a tooltip.
Both API docs and guides can be searched for using the search field at the top of the page.
On API doc pages there is also a filter input field that filters the member rows using the filter string. In addition to filtering by string you can filter the class members by access level, inheritance, and read only. This is done using the checkboxes at the top of the page.
The checkbox at the bottom of the API class navigation tree filters the class list to include or exclude private classes.
Clicking on an empty search field will show your last 10 searches for quick navigation.
Each API doc page (with the exception of Javascript primitives pages) has a menu view of metadata relating to that class. This metadata view will have one or more of the following:
Ext.button.Button class has an alternate class name of Ext.Button). Alternate class
names are commonly maintained for backward compatibility.Runnable examples (Fiddles) are expanded on a page by default. You can collapse and expand example code blocks individually using the arrow on the top-left of the code block. You can also toggle the collapse state of all examples using the toggle button on the top-right of the page. The toggle-all state will be remembered between page loads.
Class members are collapsed on a page by default. You can expand and collapse members using the arrow icon on the left of the member row or globally using the expand / collapse all toggle button top-right.
Viewing the docs on narrower screens or browsers will result in a view optimized for a smaller form factor. The primary differences between the desktop and "mobile" view are:
The class source can be viewed by clicking on the class name at the top of an API doc page. The source for class members can be viewed by clicking on the "view source" link on the right-hand side of the member row.
The Rest proxy is a specialization of the Ext.data.proxy.Ajax which simply maps the four actions (create, read, update and destroy) to RESTful HTTP verbs. For example, let's set up a Ext.data.Model with an inline Rest proxy
Ext.define('User', {
extend: 'Ext.data.Model',
fields: ['id', 'name', 'email'],
proxy: {
type: 'rest',
url : '/users'
}
});
Now we can create a new User instance and save it via the Rest proxy. Doing this will cause the Proxy to send a POST request to '/users':
var user = Ext.create('User', {name: 'Ed Spencer', email: 'ed@sencha.com'});
user.save(); //POST /users
Let's expand this a little and provide a callback for the Ext.data.Model#save call to update the Model once it has been created. We'll assume the creation went successfully and that the server gave this user an ID of 123:
user.save({
success: function(user) {
user.set('name', 'Khan Noonien Singh');
user.save(); //PUT /users/123
}
});
Now that we're no longer creating a new Model instance, the request method is changed to an HTTP PUT, targeting the relevant url for that user. Now let's delete this user, which will use the DELETE method:
user.erase(); //DELETE /users/123
Finally, when we perform a load of a Model or Store, Rest proxy will use the GET method:
//1. Load via Store
//the Store automatically picks up the Proxy from the User model
var store = Ext.create('Ext.data.Store', {
model: 'User'
});
store.load(); //GET /users
//2. Load directly from the Model
//GET /users/123
User.load(123, {
success: function(user) {
console.log(user.getId()); //outputs 123
}
});
The Rest proxy is able to automatically generate the urls above based on two configuration options - appendId and format. If appendId is true (it is by default) then Rest proxy will automatically append the ID of the Model instance in question to the configured url, resulting in the '/users/123' that we saw above.
If the request is not for a specific Model instance (e.g. loading a Store), the url is not appended with an id. The Rest proxy will automatically insert a '/' before the ID if one is not already present.
new Ext.data.proxy.Rest({
url: '/users',
appendId: true //default
});
// Collection url: /users
// Instance url : /users/123
The Rest proxy can also optionally append a format string to the end of any generated url:
new Ext.data.proxy.Rest({
url: '/users',
format: 'json'
});
// Collection url: /users.json
// Instance url : /users/123.json
If further customization is needed, simply implement the buildUrl method and add your custom generated url onto the Ext.data.Request object that is passed to buildUrl. See Rest proxy's implementation for an example of how to achieve this.
Note that Rest proxy inherits from Ext.data.proxy.Ajax, which already injects all of the sorter, filter, group and paging options into the generated url. See the Ext.data.proxy.Ajax for more details.
Mapping of action name to HTTP request method. In the basic AjaxProxy these are set to 'GET' for 'read' actions and 'POST' for 'create', 'update' and 'destroy' actions. The Ext.data.proxy.Rest maps these to the correct RESTful methods.
Defaults to:
{
create: 'POST',
read: 'GET',
update: 'PUT',
destroy: 'DELETE'
}
Specific urls to call on CRUD action methods "create", "read", "update" and "destroy". Defaults to:
api: {
create : undefined,
read : undefined,
update : undefined,
destroy : undefined
}
The url is built based upon the action being executed [create|read|update|destroy] using the commensurate api property, or if undefined default to the configured Ext.data.Store.url.
For example:
api: {
create : '/controller/new',
read : '/controller/load',
update : '/controller/update',
destroy : '/controller/destroy_action'
}
If the specific URL for a given CRUD action is undefined, the CRUD action request will be directed to the configured url.
Defaults to:
{
create: undefined,
read: undefined,
update: undefined,
destroy: undefined
}
True to automatically append the ID of a Model instance when performing a request based on that single instance. See Rest proxy intro docs for more details.
Defaults to:
true
True to batch actions of a particular type when synchronizing the store.
Defaults to:
false
Comma-separated ordering 'create', 'update' and 'destroy' actions when batching. Override this to set a different order for the batched CRUD actions to be executed in. Defaults to 'create,update,destroy'.
Defaults to:
'create,update,destroy'
True to request binary data from the server. This feature requires the use of a binary reader such as Ext.data.amf.Reader
Defaults to:
false
The name of the cache param added to the url when using noCache. Defaults to "_dc".
Defaults to:
"_dc"
The name of the direction parameter to send in a request. This is only used when simpleSortMode is set to true.
If this is set to the same value as the sortParam, then the sort property name and direction
of each sorter is passed as a single, space separated parameter, looking like a database order by specification.
So if there are multiple sorters, the single sort parameter will look like this:
?sort=name%20ASC&sort=age%20DESC
Defaults to:
"dir"
Sets the value of directionParam
directionParam : String
Extra parameters that will be included on every request. Individual requests with params of the same name will override these params when they are in conflict.
Defaults to:
{}
The name of the 'filter' parameter to send in a request. Defaults to 'filter'. Set this to '' if you don't
want to send a filter parameter.
Defaults to:
"filter"
Optional data format to send to the server when making any request (e.g. 'json'). See the Rest proxy intro docs for full details.
Defaults to:
null
The name of the direction parameter to send in a request. This is only used when simpleGroupMode is set to
true.
If this is set to the same value as the groupParam, then the group property name and direction
of each grouper is passed as a single, space separated parameter, looking like a database group by specification.
So if there are multiple groupers, the single group parameter will look like this:
?group=name%20ASC&group=age%20DESC
Defaults to:
"groupDir"
Sets the value of groupDirectionParam
groupDirectionParam : String
The name of the 'group' parameter to send in a request. Defaults to 'group'. Set this to '' if you don't
want to send a group parameter.
Defaults to:
"group"
Any headers to add to the Ajax request.
example:
proxy: {
headers: {'Content-Type': "text/plain" }
...
}
Defaults to:
undefined
The name of the parameter which carries the id of the entity being operated upon.
Defaults to:
"id"
The name of the 'limit' parameter to send in a request. Defaults to 'limit'. Set this to '' if you don't
want to send a limit parameter.
Defaults to:
"limit"
A config object containing one or more event handlers to be added to this object during initialization. This should be a valid listeners config object as specified in the addListener example for attaching multiple handlers at once.
DOM events from Ext JS Ext.Component
While some Ext JS Component classes export selected DOM events (e.g. "click", "mouseover" etc), this is usually
only done when extra value can be added. For example the DataView's itemclick event passing the node clicked on. To access DOM events directly from a
child element of a Component, we need to specify the element option to identify the Component property to add a
DOM listener to:
new Ext.panel.Panel({
width: 400,
height: 200,
dockedItems: [{
xtype: 'toolbar'
}],
listeners: {
click: {
element: 'el', //bind to the underlying el property on the panel
fn: function(){ console.log('click el'); }
},
dblclick: {
element: 'body', //bind to the underlying body property on the panel
fn: function(){ console.log('dblclick body'); }
}
}
});
An alias for addListener. In versions prior to 5.1, listeners had a generated setter which could be called to add listeners. In 5.1 the listeners config is not processed using the config system and has no generated setter, so this method is provided for backward compatibility. The preferred way of adding listeners is to use the on method.
listeners : Object
The listeners
The name of the Model to tie to this Proxy. Can be either the string name of the Model, or a reference to the Model constructor. Required.
Defaults to:
undefined
Disable caching by adding a unique parameter name to the request. Set to false to allow caching. Defaults to true.
Defaults to:
true
The name of the 'page' parameter to send in a request. Defaults to 'page'. Set this to '' if you don't
want to send a page parameter.
Defaults to:
"page"
Set to true to have any request parameters sent as jsonData
where they can be parsed from the raw request. By default, parameters are sent via the
params property. Note: This setting does not apply when the
request is sent as a 'GET' request. See actionMethods for controlling the HTTP verb
that is used when sending requests.
Defaults to:
false
Most oData feeds require basic HTTP authentication. This configuration allows you to specify the password.
Defaults to:
null
The Ext.data.reader.Reader to use to decode the server's response or data read from client. This can either be a Reader instance, a config object or just a valid Reader type name (e.g. 'json', 'xml').
Defaults to:
{
type: 'json'
}
Sets the value of reader
reader : Object / String / Ext.data.reader.Reader
Enabling simpleGroupMode in conjunction with remoteGroup will only send one group property and a direction when a remote group is requested. The groupDirectionParam and groupParam will be sent with the property name and either 'ASC' or 'DESC'.
Defaults to:
false
Sets the value of simpleGroupMode
simpleGroupMode : Boolean
Enabling simpleSortMode in conjunction with remoteSort will send the sorted field names in the parameter named by sortParam, and the directions for each sorted field in a parameter named by directionParam.
In the simplest case, with one Sorter, this will result in HTTP parameters like this:
?sort=name&dir=ASC
If there are multiple sorters, the parameters will be encoded like this:
?sort=name&sort=age&dir=ASC&dir=DESC
Defaults to:
false
Sets the value of simpleSortMode
simpleSortMode : Boolean
The name of the 'sort' parameter to send in a request. Defaults to 'sort'. Set this to '' if you don't
want to send a sort parameter.
Defaults to:
"sort"
The name of the 'start' parameter to send in a request. Defaults to 'start'. Set this to '' if you don't
want to send a start parameter.
Defaults to:
"start"
The number of milliseconds to wait for a response. Defaults to 30000 milliseconds (30 seconds).
Defaults to:
30000
The URL from which to request the data object.
Defaults to:
''
Get the url for the request taking into account the order of priority,
request : Ext.data.Request
The request
The url
Set this to false to not send the default Xhr header (X-Requested-With) with every request. This should be set to false when making CORS (cross-domain) requests.
Defaults to:
true
Sets the value of useDefaultXhrHeader
useDefaultXhrHeader : Boolean
Most oData feeds require basic HTTP authentication. This configuration allows you to specify the username.
Defaults to:
null
This configuration is sometimes necessary when using cross-origin resource sharing.
Defaults to:
false
Sets the value of withCredentials
withCredentials : Boolean
The Ext.data.writer.Writer to use to encode any request sent to the server or saved to client. This can either be a Writer instance, a config object or just a valid Writer type name (e.g. 'json', 'xml').
Defaults to:
{
type: 'json'
}
Sets the value of writer
writer : Object / String / Ext.data.writer.Writer
The value true causes config values to be stored on instances using a
property name prefixed with an underscore ("_") character. A value of false
stores config values as properties using their exact name (no prefix).
Defaults to:
true
Available since: 5.0.0
The value true instructs the initConfig method to only honor values for
properties declared in the config block of a class. When false, properties
that are not declared in a config block will be placed on the instance.
Defaults to:
true
Available since: 5.0.0
Matches options property names within a listeners specification object - property names which are never used as event names.
Defaults to:
{
scope: 1,
delay: 1,
buffer: 1,
onFrame: 1,
single: 1,
args: 1,
destroyable: 1,
priority: 1,
order: 1
}
We don't want the base destructor to clear the prototype because our destroyObservable handler must be called the very last. It will take care of the prototype after completing Observable destruction sequence.
Defaults to:
true
Mapping of action name to HTTP request method. These default to RESTful conventions for the 'create', 'read', 'update' and 'destroy' actions (which map to 'POST', 'GET', 'PUT' and 'DELETE' respectively). This object should not be changed except globally via Ext.override - the getMethod function can be overridden instead.
Setting this property to false will prevent nulling object references
on a Class instance after destruction. Setting this to "async" will delay
the clearing for approx 50ms.
Defaults to:
true
Available since: 6.2.0
Setting this property to true will result in setting the object's
prototype to null after the destruction sequence is fully completed.
After that, most attempts at calling methods on the object instance
will result in "method not defined" exception. This can be very helpful
with tracking down otherwise hard to find bugs like runaway Ajax requests,
timed functions not cleared on destruction, etc.
Note that this option can only work in browsers that support Object.setPrototypeOf
method, and is only available in debugging mode.
Defaults to:
false
Available since: 6.2.0
This property is set to true after the destroy method is called.
Defaults to:
false
Initial suspended call count. Incremented when suspendEvents is called, decremented when resumeEvents is called.
Defaults to:
0
If this property is specified by the target class of this mixin its properties are
used to configure the created Ext.Factory.
This object holds a key for any event that has a listener. The listener may be set directly on the instance, or on its class or a super class (via observe) or on the Ext.app.EventBus. The values of this object are truthy (a non-zero number) and falsy (0 or undefined). They do not represent an exact count of listeners. The value for an event is truthy if the event must be fired and is falsy if there is no need to fire the event.
The intended use of this property is to avoid the expense of fireEvent calls when there are no listeners. This can be particularly helpful when one would otherwise have to call fireEvent hundreds or thousands of times. It is used like this:
if (this.hasListeners.foo) {
this.fireEvent('foo', this, arg1);
}
This property is set to true during the call to initConfig.
Defaults to:
false
Available since: 5.0.0
This property is set to true if this instance is the first of its class.
Defaults to:
false
Available since: 5.0.0
This value is true and is used to identify plain objects from instances of
a defined class.
Defaults to:
true
true in this class to identify an object as an instantiated Observable, or subclass thereof.
Defaults to:
true
true in this class to identify an object as an instantiated Proxy, or subclass thereof.
Defaults to:
true
Get the reference to the current class from which this object was instantiated. Unlike Ext.Base#statics,
this.self is scope-dependent and it's meant to be used for dynamic inheritance. See Ext.Base#statics
for a detailed comparison
Ext.define('My.Cat', {
statics: {
speciesName: 'Cat' // My.Cat.speciesName = 'Cat'
},
constructor: function() {
alert(this.self.speciesName); // dependent on 'this'
},
clone: function() {
return new this.self();
}
});
Ext.define('My.SnowLeopard', {
extend: 'My.Cat',
statics: {
speciesName: 'Snow Leopard' // My.SnowLeopard.speciesName = 'Snow Leopard'
}
});
var cat = new My.Cat(); // alerts 'Cat'
var snowLeopard = new My.SnowLeopard(); // alerts 'Snow Leopard'
var clone = snowLeopard.clone();
alert(Ext.getClassName(clone)); // alerts 'My.SnowLeopard'
Defaults to:
Base
Adds declarative listeners as nested arrays of listener objects.
listeners : Array
true if any listeners were added
Aborts a running request.
request : Ext.data.Request (optional)
The request to abort. If not passed, the most recent active request will be aborted.
This method applies a versioned, deprecation declaration to this class. This
is typically called by the deprecated config.
deprecations : Object
The on method is shorthand for addListener.
Appends an event handler to this object. For example:
myGridPanel.on("itemclick", this.onItemClick, this);
The method also allows for a single argument to be passed which is a config object containing properties which specify multiple events. For example:
myGridPanel.on({
cellclick: this.onCellClick,
select: this.onSelect,
viewready: this.onViewReady,
scope: this // Important. Ensure "this" is correct during handler execution
});
One can also specify options for each event handler separately:
myGridPanel.on({
cellclick: {fn: this.onCellClick, scope: this, single: true},
viewready: {fn: panel.onViewReady, scope: panel}
});
Names of methods in a specified scope may also be used:
myGridPanel.on({
cellclick: {fn: 'onCellClick', scope: this, single: true},
viewready: {fn: 'onViewReady', scope: panel}
});
eventName : String/Object
The name of the event to listen for. May also be an object who's property names are event names.
fn : Function/String (optional)
The method the event invokes or the name of
the method within the specified scope. Will be called with arguments
given to Ext.util.Observable#fireEvent plus the options parameter described
below.
scope : Object (optional)
The scope (this reference) in which the handler function is
executed. If omitted, defaults to the object which fired the event.
options : Object (optional)
An object containing handler configuration.
Note: The options object will also be passed as the last argument to every event handler.
This object may contain any of the following properties:
scope : Object
The scope (this reference) in which the handler function is executed. If omitted,
defaults to the object which fired the event.
delay : Number
The number of milliseconds to delay the invocation of the handler after the event fires.
single : Boolean
True to add a handler to handle just the next firing of the event, and then remove itself.
buffer : Number
Causes the handler to be scheduled to run in an Ext.util.DelayedTask delayed by the specified number of milliseconds. If the event fires again within that time, the original handler is not invoked, but the new handler is scheduled in its place.
onFrame : Number
Causes the handler to be scheduled to run at the next animation frame event. If the event fires again before that time, the handler is not rescheduled - the handler will only be called once when the next animation frame is fired, with the last set of arguments passed.
target : Ext.util.Observable
Only call the handler if the event was fired on the target Observable, not if the event was bubbled up from a child Observable.
element : String
This option is only valid for listeners bound to Ext.Component. The name of a Component property which references an Ext.dom.Element to add a listener to.
This option is useful during Component construction to add DOM event listeners to elements of Ext.Component which will exist only after the Component is rendered.
For example, to add a click listener to a Panel's body:
var panel = new Ext.panel.Panel({
title: 'The title',
listeners: {
click: this.handlePanelClick,
element: 'body'
}
});
In order to remove listeners attached using the element, you'll need to reference the element itself as seen below.
panel.body.un(...)
delegate : String (optional)
A simple selector to filter the event target or look for a descendant of the target.
The "delegate" option is only available on Ext.dom.Element instances (or when attaching a listener to a Ext.dom.Element via a Component using the element option).
See the delegate example below.
capture : Boolean (optional)
When set to true, the listener is fired in the capture phase of the event propagation
sequence, instead of the default bubble phase.
The capture option is only available on Ext.dom.Element instances (or
when attaching a listener to a Ext.dom.Element via a Component using the
element option).
stopPropagation : Boolean (optional)
This option is only valid for listeners bound to Ext.dom.Element.
true to call stopPropagation on the event object
before firing the handler.
preventDefault : Boolean (optional)
This option is only valid for listeners bound to Ext.dom.Element.
true to call preventDefault on the event object
before firing the handler.
stopEvent : Boolean (optional)
This option is only valid for listeners bound to Ext.dom.Element.
true to call stopEvent on the event object
before firing the handler.
args : Array (optional)
Optional set of arguments to pass to the handler function before the actual
fired event arguments. For example, if args is set to ['foo', 42],
the event handler function will be called with an arguments list like this:
handler('foo', 42, <actual event arguments>...);
destroyable : Boolean (optional)
When specified as true, the function returns a destroyable object. An object
which implements the destroy method which removes all listeners added in this call.
This syntax can be a helpful shortcut to using un; particularly when
removing multiple listeners. NOTE - not compatible when using the element
option. See un for the proper syntax for removing listeners added using the
element config.
Defaults to:
false
priority : Number (optional)
An optional numeric priority that determines the order in which event handlers are run. Event handlers with no priority will be run as if they had a priority of 0. Handlers with a higher priority will be prioritized to run sooner than those with a lower priority. Negative numbers can be used to set a priority lower than the default. Internally, the framework uses a range of 1000 or greater, and -1000 or lesser for handlers that are intended to run before or after all others, so it is recommended to stay within the range of -999 to 999 when setting the priority of event handlers in application-level code. A priority must be an integer to be valid. Fractional values are reserved for internal framework use.
order : String (optional)
A legacy option that is provided for backward compatibility.
It is recommended to use the priority option instead. Available options are:
'before': equal to a priority of 100'current': equal to a priority of 0 or default priority'after': equal to a priority of -100Defaults to:
'current'
order : String (optional)
A shortcut for the order event option. Provided for backward compatibility.
Please use the priority event option instead.
Defaults to: 'current'
Only when the destroyable option is specified.
A Destroyable object. An object which implements the destroy method which removes
all listeners added in this call. For example:
this.btnListeners = = myButton.on({
destroyable: true
mouseover: function() { console.log('mouseover'); },
mouseout: function() { console.log('mouseout'); },
click: function() { console.log('click'); }
});
And when those listeners need to be removed:
Ext.destroy(this.btnListeners);
or
this.btnListeners.destroy();
The addManagedListener method is used when some object (call it "A") is listening to an event on another observable object ("B") and you want to remove that listener from "B" when "A" is destroyed. This is not an issue when "B" is destroyed because all of its listeners will be removed at that time.
Example:
Ext.define('Foo', {
extend: 'Ext.Component',
initComponent: function () {
this.addManagedListener(MyApp.SomeGlobalSharedMenu, 'show', this.doSomething);
this.callParent();
}
});
As you can see, when an instance of Foo is destroyed, it ensures that the 'show'
listener on the menu (MyApp.SomeGlobalSharedMenu) is also removed.
As of version 5.1 it is no longer necessary to use this method in most cases because
listeners are automatically managed if the scope object provided to
addListener is an Observable instance.
However, if the observable instance and scope are not the same object you
still need to use mon or addManagedListener if you want the listener to be
managed.
item : Ext.util.Observable/Ext.dom.Element
The item to which to add a listener/listeners.
ename : Object/String
The event name, or an object containing event name properties.
fn : Function/String (optional)
If the ename parameter was an event
name, this is the handler function or the name of a method on the specified
scope.
scope : Object (optional)
If the ename parameter was an event name, this is the scope (this reference)
in which the handler function is executed.
options : Object (optional)
If the ename parameter was an event name, this is the
addListener options.
Only when the destroyable option is specified.
A Destroyable object. An object which implements the destroy method which removes all listeners added in this call. For example:
this.btnListeners = myButton.mon({
destroyable: true
mouseover: function() { console.log('mouseover'); },
mouseout: function() { console.log('mouseout'); },
click: function() { console.log('click'); }
});
And when those listeners need to be removed:
Ext.destroy(this.btnListeners);
or
this.btnListeners.destroy();
Optional callback function which can be used to clean up after a request has been completed.
request : Ext.data.Request
The Request object
success : Boolean
True if the request was successful
This is a template method. a hook into the functionality of this class. Feel free to override it in child classes.
Encode any values being sent to the server. Can be overridden in subclasses.
value : Array
An array of sorters/filters.
The encoded value
Performs a batch of Ext.data.operation.Operation, in the order specified by batchOrder. Used internally by Ext.data.Store's sync method. Example usage:
myProxy.batch({
create : [myModel1, myModel2],
update : [myModel3],
destroy: [myModel4, myModel5]
});
Where the myModel* above are Ext.data.Model instances - in this case 1 and 2 are new instances and have not been saved before, 3 has been saved previously but needs to be updated, and 4 and 5 have already been saved but should now be destroyed.
Note that the previous version of this method took 2 arguments (operations and listeners). While this is still
supported for now, the current signature is now a single options argument that can contain both operations and
listeners, in addition to other options. The multi-argument signature will likely be deprecated in a future release.
options : Object
Object containing one or more properties supported by the batch method:
operations : Object
Object containing the Model instances to act upon, keyed by action name
listeners : Object (optional)
Event listeners object passed straight through to the Batch - see Ext.data.Batch for details
batch : Ext.data.Batch / Object (optional)
A Ext.data.Batch object (or batch config to apply to the created batch). If unspecified a default batch will be auto-created.
callback : Function (optional)
The function to be called upon completion of processing the batch. The callback is called regardless of success or failure and is passed the following parameters:
batch : Ext.data.Batch
The Ext.data.Batch that was processed, containing all operations in their current state after processing
options : Object
The options argument that was originally passed into batch
success : Function (optional)
The function to be called upon successful completion of the batch. The
success function is called only if no exceptions were reported in any operations. If one or more exceptions
occurred then the failure function will be called instead. The success function is called
with the following parameters:
batch : Ext.data.Batch
The Ext.data.Batch that was processed, containing all operations in their current state after processing
options : Object
The options argument that was originally passed into batch
failure : Function (optional)
The function to be called upon unsuccessful completion of the batch. The failure function is called when one or more operations returns an exception during processing (even if some operations were also successful). In this case you can check the batch's exceptions array to see exactly which operations had exceptions. The failure function is called with the following parameters:
batch : Ext.data.Batch
The Ext.data.Batch that was processed, containing all operations in their current state after processing
options : Object
The options argument that was originally passed into batch
scope : Object (optional)
The scope in which to execute any callbacks (i.e. the this object inside
the callback, success and/or failure functions). Defaults to the proxy.
listeners : Object (optional)
If options is the operations, this
parameter is the listeners. Instead of passing these two arguments, the proper form
is to pass them as:
batch({
operations: ...
listeners: ...
});
The newly created Batch
Creates an Ext.data.Request object from Ext.data.operation.Operation.
This gets called from doRequest methods in subclasses of Server proxy.
operation : Ext.data.operation.Operation
The operation to execute
The request object
Specialized version of buildUrl that incorporates the appendId and format options into the generated url. Override this to provide further customizations, but remember to call the superclass buildUrl so that additional parameters like the cache buster string are appended.
request : Object
Call the original method that was previously overridden with Ext.Base#override
Ext.define('My.Cat', {
constructor: function() {
alert("I'm a cat!");
}
});
My.Cat.override({
constructor: function() {
alert("I'm going to be a cat!");
this.callOverridden();
alert("Meeeeoooowwww");
}
});
var kitty = new My.Cat(); // alerts "I'm going to be a cat!"
// alerts "I'm a cat!"
// alerts "Meeeeoooowwww"
args : Array/Arguments
The arguments, either an array or the arguments object
from the current method, for example: this.callOverridden(arguments)
Returns the result of calling the overridden method
Deprecated since version 4.1.0
Use method-callParent instead.
Call the "parent" method of the current method. That is the method previously overridden by derivation or by an override (see Ext#define).
Ext.define('My.Base', {
constructor: function (x) {
this.x = x;
},
statics: {
method: function (x) {
return x;
}
}
});
Ext.define('My.Derived', {
extend: 'My.Base',
constructor: function () {
this.callParent([21]);
}
});
var obj = new My.Derived();
alert(obj.x); // alerts 21
This can be used with an override as follows:
Ext.define('My.DerivedOverride', {
override: 'My.Derived',
constructor: function (x) {
this.callParent([x*2]); // calls original My.Derived constructor
}
});
var obj = new My.Derived();
alert(obj.x); // now alerts 42
This also works with static and private methods.
Ext.define('My.Derived2', {
extend: 'My.Base',
// privates: {
statics: {
method: function (x) {
return this.callParent([x*2]); // calls My.Base.method
}
}
});
alert(My.Base.method(10)); // alerts 10
alert(My.Derived2.method(10)); // alerts 20
Lastly, it also works with overridden static methods.
Ext.define('My.Derived2Override', {
override: 'My.Derived2',
// privates: {
statics: {
method: function (x) {
return this.callParent([x*2]); // calls My.Derived2.method
}
}
});
alert(My.Derived2.method(10); // now alerts 40
To override a method and replace it and also call the superclass method, use method-callSuper. This is often done to patch a method to fix a bug.
args : Array/Arguments
The arguments, either an array or the arguments object
from the current method, for example: this.callParent(arguments)
Returns the result of calling the parent method
This method is used by an override to call the superclass method but bypass any overridden method. This is often done to "patch" a method that contains a bug but for whatever reason cannot be fixed directly.
Consider:
Ext.define('Ext.some.Class', {
method: function () {
console.log('Good');
}
});
Ext.define('Ext.some.DerivedClass', {
extend: 'Ext.some.Class',
method: function () {
console.log('Bad');
// ... logic but with a bug ...
this.callParent();
}
});
To patch the bug in Ext.some.DerivedClass.method, the typical solution is to create an
override:
Ext.define('App.patches.DerivedClass', {
override: 'Ext.some.DerivedClass',
method: function () {
console.log('Fixed');
// ... logic but with bug fixed ...
this.callSuper();
}
});
The patch method cannot use method-callParent to call the superclass
method since that would call the overridden method containing the bug. In
other words, the above patch would only produce "Fixed" then "Good" in the
console log, whereas, using callParent would produce "Fixed" then "Bad"
then "Good".
args : Array/Arguments
The arguments, either an array or the arguments object
from the current method, for example: this.callSuper(arguments)
Returns the result of calling the superclass method
Note that if this HttpProxy is being used by a Ext.data.Store, then the Store's call to load will override any specified callback and params options. In this case, use the Ext.data.Store's events to modify parameters, or react to loading events.
config : Object (optional)
Config object. If an options parameter is passed, the singleton Ext.Ajax object will be used to make the request.
Performs the given create operation.
operation : Ext.data.operation.Operation
The Operation to perform
Creates an event handling function which re-fires the event from this object as the passed event name.
newName : String
The name under which to re-fire the passed parameters.
beginEnd : Array (optional)
The caller can specify on which indices to slice.
TODO: This is currently identical to the JsonPProxy version except for the return function's signature. There is a lot of code duplication inside the returned function so we need to find a way to DRY this up.
request : Ext.data.Request
The Request object
operation : Ext.data.operation.Operation
The Operation being executed
The callback function
This method is called to cleanup an object and its resources. After calling this method, the object should not be used any further in any way, including access to its methods and properties.
To prevent potential memory leaks, all object references will be nulled
at the end of destruction sequence, unless clearPropertiesOnDestroy
is set to false.
Destroys member properties by name.
If a property name is the name of a config, the getter is not invoked, so if the config has not been initialized, nothing will be done.
The property will be destroyed, and the corrected name (if the property is a config
and config names are prefixed) will set to null in this object's dictionary.
args : String...
One or more names of the properties to destroy and remove from the object.
Continue to fire event.
eventName : String
args : Array
bubbles : Boolean
In ServerProxy subclasses, the method-create, method-read, method-update and method-erase methods all pass through to doRequest. Each ServerProxy subclass must implement the doRequest method - see Ext.data.proxy.JsonP and Ext.data.proxy.Ajax for examples. This method carries the same signature as each of the methods that delegate to it.
operation : Ext.data.operation.Operation
The Ext.data.operation.Operation object
callback : Function
The callback function to call when the Operation has completed
scope : Object
The scope in which to execute the callback
Enables events fired by this Observable to bubble up an owner hierarchy by calling this.getBubbleTarget() if
present. There is no implementation in the Observable base class.
This is commonly used by Ext.Components to bubble events to owner Containers. See Ext.Component#getBubbleTarget. The default implementation in Ext.Component returns the Component's immediate owner. But if a known target is required, this can be overridden to access the required target more quickly.
Example:
Ext.define('Ext.overrides.form.field.Base', {
override: 'Ext.form.field.Base',
// Add functionality to Field's initComponent to enable the change event to bubble
initComponent: function () {
this.callParent();
this.enableBubble('change');
}
});
var myForm = Ext.create('Ext.form.Panel', {
title: 'User Details',
items: [{
...
}],
listeners: {
change: function() {
// Title goes red if form has been modified.
myForm.header.setStyle('color', 'red');
}
}
});
eventNames : String/String[]
The event name to bubble, or an Array of event names.
Encodes the array of Ext.util.Filter objects into a string to be sent in the request url. By default, this simply JSON-encodes the filter data
filters : Ext.util.Filter[]
The array of Ext.util.Filter objects
The encoded filters
Encodes the array of Ext.util.Sorter objects into a string to be sent in the request url. By default, this simply JSON-encodes the sorter data
sorters : Ext.util.Sorter[]
The array of Ext.util.Sorter objects
preventArray : Boolean (optional)
Prevents the items from being output as an array.
Defaults to: false
The encoded sorters
Performs the given destroy operation.
operation : Ext.data.operation.Operation
The Operation to perform
Template method to allow subclasses to specify how to get the response for the reader.
response : Object
The server response
The response data to be used by the reader
This is a template method. a hook into the functionality of this class. Feel free to override it in child classes.
Fires the specified event with the passed parameters and executes a function (action).
By default, the action function will be executed after any "before" event handlers
(as specified using the order option of
addListener), but before any other
handlers are fired. This gives the "before" handlers an opportunity to
cancel the event by returning false, and prevent the action function from
being called.
The action can also be configured to run after normal handlers, but before any "after"
handlers (as specified using the order event option) by passing 'after'
as the order parameter. This configuration gives any event handlers except
for "after" handlers the opportunity to cancel the event and prevent the action
function from being called.
eventName : String
The name of the event to fire.
args : Array
Arguments to pass to handlers and to the action function.
fn : Function
The action function.
scope : Object (optional)
The scope (this reference) in which the handler function is
executed. If omitted, defaults to the object which fired the event.
options : Object (optional)
Event options for the action function. Accepts any
of the options of addListener
order : String (optional)
The order to call the action function relative
too the event handlers ('before' or 'after'). Note that this option is
simply used to sort the action function relative to the event handlers by "priority".
An order of 'before' is equivalent to a priority of 99.5, while an order of
'after' is equivalent to a priority of -99.5. See the priority option
of addListener for more details.
Defaults to: 'before'
Deprecated since version 5.5
Use fireEventedAction instead.
Fires the specified event with the passed parameters (minus the event name, plus the options object passed
to addListener).
An event may be set to bubble up an Observable parent hierarchy (See Ext.Component#getBubbleTarget) by calling enableBubble.
eventName : String
The name of the event to fire.
args : Object...
Variable number of parameters are passed to handlers.
returns false if any of the handlers return false otherwise it returns true.
Fires the specified event with the passed parameter list.
An event may be set to bubble up an Observable parent hierarchy (See Ext.Component#getBubbleTarget) by calling enableBubble.
eventName : String
The name of the event to fire.
args : Object[]
An array of parameters which are passed to handlers.
returns false if any of the handlers return false otherwise it returns true.
Fires the specified event with the passed parameters and executes a function (action). Evented Actions will automatically dispatch a 'before' event passing. This event will be given a special controller that allows for pausing/resuming of the event flow.
By pausing the controller the updater and events will not run until resumed. Pausing, however, will not stop the processing of any other before events.
eventName : String
The name of the event to fire.
args : Array
Arguments to pass to handlers and to the action function.
fn : Function/String
The action function.
scope : Object (optional)
The scope (this reference) in which the handler function is
executed. If omitted, defaults to the object which fired the event.
fnArgs : Array/Boolean (optional)
Optional arguments for the action fn. If not
given, the normal args will be used to call fn. If false is passed, the
args are used but if the first argument is this instance it will be removed
from the args passed to the action function.
Gets the bubbling parent for an Observable
The bubble parent. null is returned if no bubble target exists
Returns a specified config property value. If the name parameter is not passed, all current configuration options will be returned as key value pairs.
name : String (optional)
The name of the config property to get.
peek : Boolean (optional)
true to peek at the raw value without calling the getter.
Defaults to: false
ifInitialized : Boolean (optional)
true to only return the initialized property value,
not the raw config value, and not to trigger initialization. Returns undefined if the
property has not yet been initialized.
Defaults to: false
The config property value.
Retrieves the id of this component. Will autogenerate an id if one has not already been set.
id
Returns the initial configuration passed to the constructor when instantiating this class.
Given this example Ext.button.Button definition and instance:
Ext.define('MyApp.view.Button', {
extend: 'Ext.button.Button',
xtype: 'mybutton',
scale: 'large',
enableToggle: true
});
var btn = Ext.create({
xtype: 'mybutton',
renderTo: Ext.getBody(),
text: 'Test Button'
});
Calling btn.getInitialConfig() would return an object including the config
options passed to the create method:
xtype: 'mybutton',
renderTo: // The document body itself
text: 'Test Button'
Calling btn.getInitialConfig('text')returns 'Test Button'.
name : String (optional)
Name of the config option to return.
The full config object or a single config value
when name parameter specified.
Returns the HTTP method name for a given request. By default this returns based on a lookup on actionMethods.
request : Ext.data.Request
The request object
The HTTP method to use (should be one of 'GET', 'POST', 'PUT' or 'DELETE')
Copy any sorters, filters etc into the params so they can be sent over the wire
operation : Object
Checks to see if this object has any listeners for a specified event, or whether the event bubbles. The answer indicates whether the event needs firing or not.
eventName : String
The name of the event to check for
true if the event is being listened for or bubbles, else false
Initialize configuration for this class. a typical example:
Ext.define('My.awesome.Class', {
// The default config
config: {
name: 'Awesome',
isAwesome: true
},
constructor: function(config) {
this.initConfig(config);
}
});
var awesome = new My.awesome.Class({
name: 'Super Awesome'
});
alert(awesome.getName()); // 'Super Awesome'
instanceConfig : Object
this
Checks if all events, or a specific event, is suspended.
event : String (optional)
The name of the specific event to check
true if events are suspended
Adds a "destroyable" object to an internal list of objects that will be destroyed
when this instance is destroyed (via destroy).
name : String
value : Object
The value passed.
Shorthand for addManagedListener. The addManagedListener method is used when some object (call it "A") is listening to an event on another observable object ("B") and you want to remove that listener from "B" when "A" is destroyed. This is not an issue when "B" is destroyed because all of its listeners will be removed at that time.
Example:
Ext.define('Foo', {
extend: 'Ext.Component',
initComponent: function () {
this.addManagedListener(MyApp.SomeGlobalSharedMenu, 'show', this.doSomething);
this.callParent();
}
});
As you can see, when an instance of Foo is destroyed, it ensures that the 'show'
listener on the menu (MyApp.SomeGlobalSharedMenu) is also removed.
As of version 5.1 it is no longer necessary to use this method in most cases because
listeners are automatically managed if the scope object provided to
addListener is an Observable instance.
However, if the observable instance and scope are not the same object you
still need to use mon or addManagedListener if you want the listener to be
managed.
item : Ext.util.Observable/Ext.dom.Element
The item to which to add a listener/listeners.
ename : Object/String
The event name, or an object containing event name properties.
fn : Function/String (optional)
If the ename parameter was an event
name, this is the handler function or the name of a method on the specified
scope.
scope : Object (optional)
If the ename parameter was an event name, this is the scope (this reference)
in which the handler function is executed.
options : Object (optional)
If the ename parameter was an event name, this is the
addListener options.
Only when the destroyable option is specified.
A Destroyable object. An object which implements the destroy method which removes all listeners added in this call. For example:
this.btnListeners = myButton.mon({
destroyable: true
mouseover: function() { console.log('mouseover'); },
mouseout: function() { console.log('mouseout'); },
click: function() { console.log('click'); }
});
And when those listeners need to be removed:
Ext.destroy(this.btnListeners);
or
this.btnListeners.destroy();
Shorthand for removeManagedListener. Removes listeners that were added by the mon method.
item : Ext.util.Observable/Ext.dom.Element
The item from which to remove a listener/listeners.
ename : Object/String
The event name, or an object containing event name properties.
fn : Function (optional)
If the ename parameter was an event name, this is the handler function.
scope : Object (optional)
If the ename parameter was an event name, this is the scope (this reference)
in which the handler function is executed.
The on method is shorthand for addListener.
Appends an event handler to this object. For example:
myGridPanel.on("itemclick", this.onItemClick, this);
The method also allows for a single argument to be passed which is a config object containing properties which specify multiple events. For example:
myGridPanel.on({
cellclick: this.onCellClick,
select: this.onSelect,
viewready: this.onViewReady,
scope: this // Important. Ensure "this" is correct during handler execution
});
One can also specify options for each event handler separately:
myGridPanel.on({
cellclick: {fn: this.onCellClick, scope: this, single: true},
viewready: {fn: panel.onViewReady, scope: panel}
});
Names of methods in a specified scope may also be used:
myGridPanel.on({
cellclick: {fn: 'onCellClick', scope: this, single: true},
viewready: {fn: 'onViewReady', scope: panel}
});
eventName : String/Object
The name of the event to listen for. May also be an object who's property names are event names.
fn : Function/String (optional)
The method the event invokes or the name of
the method within the specified scope. Will be called with arguments
given to Ext.util.Observable#fireEvent plus the options parameter described
below.
scope : Object (optional)
The scope (this reference) in which the handler function is
executed. If omitted, defaults to the object which fired the event.
options : Object (optional)
An object containing handler configuration.
Note: The options object will also be passed as the last argument to every event handler.
This object may contain any of the following properties:
scope : Object
The scope (this reference) in which the handler function is executed. If omitted,
defaults to the object which fired the event.
delay : Number
The number of milliseconds to delay the invocation of the handler after the event fires.
single : Boolean
True to add a handler to handle just the next firing of the event, and then remove itself.
buffer : Number
Causes the handler to be scheduled to run in an Ext.util.DelayedTask delayed by the specified number of milliseconds. If the event fires again within that time, the original handler is not invoked, but the new handler is scheduled in its place.
onFrame : Number
Causes the handler to be scheduled to run at the next animation frame event. If the event fires again before that time, the handler is not rescheduled - the handler will only be called once when the next animation frame is fired, with the last set of arguments passed.
target : Ext.util.Observable
Only call the handler if the event was fired on the target Observable, not if the event was bubbled up from a child Observable.
element : String
This option is only valid for listeners bound to Ext.Component. The name of a Component property which references an Ext.dom.Element to add a listener to.
This option is useful during Component construction to add DOM event listeners to elements of Ext.Component which will exist only after the Component is rendered.
For example, to add a click listener to a Panel's body:
var panel = new Ext.panel.Panel({
title: 'The title',
listeners: {
click: this.handlePanelClick,
element: 'body'
}
});
In order to remove listeners attached using the element, you'll need to reference the element itself as seen below.
panel.body.un(...)
delegate : String (optional)
A simple selector to filter the event target or look for a descendant of the target.
The "delegate" option is only available on Ext.dom.Element instances (or when attaching a listener to a Ext.dom.Element via a Component using the element option).
See the delegate example below.
capture : Boolean (optional)
When set to true, the listener is fired in the capture phase of the event propagation
sequence, instead of the default bubble phase.
The capture option is only available on Ext.dom.Element instances (or
when attaching a listener to a Ext.dom.Element via a Component using the
element option).
stopPropagation : Boolean (optional)
This option is only valid for listeners bound to Ext.dom.Element.
true to call stopPropagation on the event object
before firing the handler.
preventDefault : Boolean (optional)
This option is only valid for listeners bound to Ext.dom.Element.
true to call preventDefault on the event object
before firing the handler.
stopEvent : Boolean (optional)
This option is only valid for listeners bound to Ext.dom.Element.
true to call stopEvent on the event object
before firing the handler.
args : Array (optional)
Optional set of arguments to pass to the handler function before the actual
fired event arguments. For example, if args is set to ['foo', 42],
the event handler function will be called with an arguments list like this:
handler('foo', 42, <actual event arguments>...);
destroyable : Boolean (optional)
When specified as true, the function returns a destroyable object. An object
which implements the destroy method which removes all listeners added in this call.
This syntax can be a helpful shortcut to using un; particularly when
removing multiple listeners. NOTE - not compatible when using the element
option. See un for the proper syntax for removing listeners added using the
element config.
Defaults to:
false
priority : Number (optional)
An optional numeric priority that determines the order in which event handlers are run. Event handlers with no priority will be run as if they had a priority of 0. Handlers with a higher priority will be prioritized to run sooner than those with a lower priority. Negative numbers can be used to set a priority lower than the default. Internally, the framework uses a range of 1000 or greater, and -1000 or lesser for handlers that are intended to run before or after all others, so it is recommended to stay within the range of -999 to 999 when setting the priority of event handlers in application-level code. A priority must be an integer to be valid. Fractional values are reserved for internal framework use.
order : String (optional)
A legacy option that is provided for backward compatibility.
It is recommended to use the priority option instead. Available options are:
'before': equal to a priority of 100'current': equal to a priority of 0 or default priority'after': equal to a priority of -100Defaults to:
'current'
order : String (optional)
A shortcut for the order event option. Provided for backward compatibility.
Please use the priority event option instead.
Defaults to: 'current'
Only when the destroyable option is specified.
A Destroyable object. An object which implements the destroy method which removes
all listeners added in this call. For example:
this.btnListeners = = myButton.on({
destroyable: true
mouseover: function() { console.log('mouseover'); },
mouseout: function() { console.log('mouseout'); },
click: function() { console.log('click'); }
});
And when those listeners need to be removed:
Ext.destroy(this.btnListeners);
or
this.btnListeners.destroy();
Appends an after-event handler.
Same as addListener with order set
to 'after'.
eventName : String/String[]/Object
The name of the event to listen for.
fn : Function/String
The method the event invokes.
scope : Object (optional)
The scope for fn.
options : Object (optional)
An object containing handler configuration.
The internal callback that the proxy uses to call any specified user callbacks after completion of a batch
batchOptions : Object
batch : Object
Appends a before-event handler. Returning false from the handler will stop the event.
Same as addListener with order set
to 'before'.
eventName : String/String[]/Object
The name of the event to listen for.
fn : Function/String
The method the event invokes.
scope : Object (optional)
The scope for fn.
options : Object (optional)
An object containing handler configuration.
Called each time the reader's onMetaChange is called so that the proxy can fire the metachange event
meta : Object
Processes response, which may involve updating or committing records, each of which will inform the owning stores and their interested views. Finally, we may perform an additional layout if the data shape has changed.
success : Object
operation : Object
request : Object
response : Object
Performs the given read operation.
operation : Ext.data.operation.Operation
The Operation to perform
Relays selected events from the specified Observable as if the events were fired by this.
For example if you are extending Grid, you might decide to forward some events from store. So you can do this inside your initComponent:
this.relayEvents(this.getStore(), ['load']);
The grid instance will then have an observable 'load' event which will be passed the parameters of the store's load event and any function fired with the grid's load event would have access to the grid using the this keyword (unless the event is handled by a controller's control/listen event listener in which case 'this' will be the controller rather than the grid).
origin : Object
The Observable whose events this object is to relay.
events : String[]/Object
Array of event names to relay or an Object with key/value pairs translating to ActualEventName/NewEventName respectively. For example: this.relayEvents(this, {add:'push', remove:'pop'});
Would now redispatch the add event of this as a push event and the remove event as a pop event.
prefix : String (optional)
A common prefix to prepend to the event names. For example:
this.relayEvents(this.getStore(), ['load', 'clear'], 'store');
Now the grid will forward 'load' and 'clear' events of store as 'storeload' and 'storeclear'.
A Destroyable object. An object which implements the destroy method which, when destroyed, removes all relayers. For example:
this.storeRelayers = this.relayEvents(this.getStore(), ['load', 'clear'], 'store');
Can be undone by calling
Ext.destroy(this.storeRelayers);
or this.store.relayers.destroy();
Removes an event handler.
eventName : String
The type of event the handler was associated with.
fn : Function
The handler to remove. This must be a reference to the function passed into the addListener call.
scope : Object (optional)
The scope originally specified for the handler. It must be the same as the scope argument specified in the original call to Ext.util.Observable#addListener or the listener will not be removed.
Removes listeners that were added by the mon method.
item : Ext.util.Observable/Ext.dom.Element
The item from which to remove a listener/listeners.
ename : Object/String
The event name, or an object containing event name properties.
fn : Function (optional)
If the ename parameter was an event name, this is the handler function.
scope : Object (optional)
If the ename parameter was an event name, this is the scope (this reference)
in which the handler function is executed.
Remove a single managed listener item
isClear : Boolean
True if this is being called during a clear
managedListener : Object
The managed listener item
item : Object
ename : String
fn : Function
scope : Object
See removeManagedListener for other args
Gets the default scope for firing late bound events (string names with no scope attached) at runtime.
defaultScope : Object (optional)
The default scope to return if none is found.
Defaults to: this
The default event scope
Resumes firing of the named event(s).
After calling this method to resume events, the events will fire when requested to fire.
Note that if the suspendEvent method is called multiple times for a certain event, this converse method will have to be called the same number of times for it to resume firing.
eventName : String...
Multiple event names to resume.
Resumes firing events (see suspendEvents).
If events were suspended using the queueSuspended parameter, then all events fired
during event suspension will be sent to any listeners now.
discardQueue : Boolean (optional)
true to prevent any previously queued events from firing
while we were suspended. See suspendEvents.
Fires a request
request : Ext.data.Request
The request
The request
Sets a single/multiple configuration options.
name : String/Object
The name of the property to set, or a set of key value pairs to set.
value : Object (optional)
The value to set for the name parameter.
this
Sets up an exception on the operation
operation : Ext.data.operation.Operation
The operation
response : Object
The response
Sets a value in the underlying extraParams.
name : String
The key for the new value
value : Object
The value
Get the reference to the class from which this object was instantiated. Note that unlike Ext.Base#self,
this.statics() is scope-independent and it always returns the class from which it was called, regardless of what
this points to during run-time
Ext.define('My.Cat', {
statics: {
totalCreated: 0,
speciesName: 'Cat' // My.Cat.speciesName = 'Cat'
},
constructor: function() {
var statics = this.statics();
alert(statics.speciesName); // always equals to 'Cat' no matter what 'this' refers to
// equivalent to: My.Cat.speciesName
alert(this.self.speciesName); // dependent on 'this'
statics.totalCreated++;
},
clone: function() {
var cloned = new this.self(); // dependent on 'this'
cloned.groupName = this.statics().speciesName; // equivalent to: My.Cat.speciesName
return cloned;
}
});
Ext.define('My.SnowLeopard', {
extend: 'My.Cat',
statics: {
speciesName: 'Snow Leopard' // My.SnowLeopard.speciesName = 'Snow Leopard'
},
constructor: function() {
this.callParent();
}
});
var cat = new My.Cat(); // alerts 'Cat', then alerts 'Cat'
var snowLeopard = new My.SnowLeopard(); // alerts 'Cat', then alerts 'Snow Leopard'
var clone = snowLeopard.clone();
alert(Ext.getClassName(clone)); // alerts 'My.SnowLeopard'
alert(clone.groupName); // alerts 'Cat'
alert(My.Cat.totalCreated); // alerts 3
Suspends firing of the named event(s).
After calling this method to suspend events, the events will no longer fire when requested to fire.
Note that if this is called multiple times for a certain event, the converse method resumeEvent will have to be called the same number of times for it to resume firing.
eventName : String...
Multiple event names to suspend.
Suspends the firing of all events. (see resumeEvents)
queueSuspended : Boolean
true to queue up suspended events to be fired
after the resumeEvents call instead of discarding all suspended events.
Shorthand for removeListener. Removes an event handler.
eventName : String
The type of event the handler was associated with.
fn : Function
The handler to remove. This must be a reference to the function passed into the addListener call.
scope : Object (optional)
The scope originally specified for the handler. It must be the same as the scope argument specified in the original call to Ext.util.Observable#addListener or the listener will not be removed.
Removes a before-event handler.
Same as removeListener with order set to 'after'.
eventName : String/String[]/Object
The name of the event the handler was associated with.
fn : Function/String
The handler to remove.
scope : Object (optional)
The scope originally specified for fn.
options : Object (optional)
Extra options object.
Removes a before-event handler.
Same as removeListener with order set to 'before'.
eventName : String/String[]/Object
The name of the event the handler was associated with.
fn : Function/String
The handler to remove.
scope : Object (optional)
The scope originally specified for fn.
options : Object (optional)
Extra options object.
Destroys a given set of linked objects. This is only needed if
the linked object is being destroyed before this instance.
names : String[]
The names of the linked objects to destroy.
this
Performs the given update operation.
operation : Ext.data.operation.Operation
The Operation to perform
Adds new config properties to this class. This is called for classes when they are declared, then for any mixins that class may define and finally for any overrides defined that target the class.
config : Object
mixinClass : Ext.Class (optional)
The mixin class if the configs are from a mixin.
members : Object
name : Object
member : Object
Add methods / properties to the prototype of this class.
Ext.define('My.awesome.Cat', {
constructor: function() {
...
}
});
My.awesome.Cat.addMembers({
meow: function() {
alert('Meowww...');
}
});
var kitty = new My.awesome.Cat();
kitty.meow();
members : Object
The members to add to this class.
isStatic : Boolean (optional)
Pass true if the members are static.
Defaults to: false
privacy : Boolean (optional)
Pass true if the members are private. This
only has meaning in debug mode and only for methods.
Defaults to: false
Add / override static properties of this class.
Ext.define('My.cool.Class', {
...
});
My.cool.Class.addStatics({
someProperty: 'someValue', // My.cool.Class.someProperty = 'someValue'
method1: function() { ... }, // My.cool.Class.method1 = function() { ... };
method2: function() { ... } // My.cool.Class.method2 = function() { ... };
});
members : Object
this
Borrow another class' members to the prototype of this class.
Ext.define('Bank', {
money: '$$$',
printMoney: function() {
alert('$$$$$$$');
}
});
Ext.define('Thief', {
...
});
Thief.borrow(Bank, ['money', 'printMoney']);
var steve = new Thief();
alert(steve.money); // alerts '$$$'
steve.printMoney(); // alerts '$$$$$$$'
fromClass : Ext.Base
The class to borrow members from
members : Array/String
The names of the members to borrow
this
Create a new instance of this Class.
Ext.define('My.cool.Class', {
...
});
My.cool.Class.create({
someConfig: true
});
All parameters are passed to the constructor of the class.
the created instance.
Create aliases for existing prototype methods. Example:
Ext.define('My.cool.Class', {
method1: function() { ... },
method2: function() { ... }
});
var test = new My.cool.Class();
My.cool.Class.createAlias({
method3: 'method1',
method4: 'method2'
});
test.method3(); // test.method1()
My.cool.Class.createAlias('method5', 'method3');
test.method5(); // test.method3() -> test.method1()
alias : String/Object
The new method name, or an object to set multiple aliases. See flexSetter
origin : String/Object
The original method name
Returns the Ext.Configurator for this class.
Get the current class' name in string format.
Ext.define('My.cool.Class', {
constructor: function() {
alert(this.self.getName()); // alerts 'My.cool.Class'
}
});
My.cool.Class.getName(); // 'My.cool.Class'
className
Used internally by the mixins pre-processor
name : Object
mixinClass : Object
fn : Object
scope : Object
Override members of this class. Overridden methods can be invoked via callParent.
Ext.define('My.Cat', {
constructor: function() {
alert("I'm a cat!");
}
});
My.Cat.override({
constructor: function() {
alert("I'm going to be a cat!");
this.callParent(arguments);
alert("Meeeeoooowwww");
}
});
var kitty = new My.Cat(); // alerts "I'm going to be a cat!"
// alerts "I'm a cat!"
// alerts "Meeeeoooowwww"
Direct use of this method should be rare. Use Ext.define instead:
Ext.define('My.CatOverride', {
override: 'My.Cat',
constructor: function() {
alert("I'm going to be a cat!");
this.callParent(arguments);
alert("Meeeeoooowwww");
}
});
The above accomplishes the same result but can be managed by the Ext.Loader which can properly order the override and its target class and the build process can determine whether the override is needed based on the required state of the target class (My.Cat).
members : Object
The properties to add to this class. This should be specified as an object literal containing one or more properties.
this class
Fires when the server returns an exception. This event may also be listened to in the event that a request has timed out or has been aborted.
this : Ext.data.proxy.Proxy
response : Ext.data.Response
The response that was received
operation : Ext.data.operation.Operation
The operation that triggered the request
eOpts : Object
The options object passed to Ext.util.Observable.addListener.
Fires when this proxy's reader provides new metadata. Metadata usually consists of new field definitions, but can include any configuration data required by an application, and can be processed as needed in the event handler. This event is currently only fired for JsonReaders. Note that this event is also propagated by Ext.data.Store, which is typically where it would be handled.
this : Ext.data.proxy.Proxy
meta : Object
The JSON metadata
eOpts : Object
The options object passed to Ext.util.Observable.addListener.
Ext JS | Terms of Use