The default fonts that ship with Xorg are less than ideal for typical desktop publishing applications. Large presentation fonts show up jagged and unprofessional looking, and small fonts are almost completely unintelligible. However, there are several free, high quality Type1 (PostScript®) fonts available which can be readily used with Xorg. For instance, the URW font collection (x11-fonts/urwfonts) includes high quality versions of standard type1 fonts (Times Roman®, Helvetica®, Palatino® and others). The Freefonts collection (x11-fonts/freefonts) includes many more fonts, but most of them are intended for use in graphics software such as the Gimp, and are not complete enough to serve as screen fonts. In addition, Xorg can be configured to use TrueType® fonts with a minimum of effort. For more details on this, see the X(7) manual page or Section 5.5.2, “TrueType® Fonts”.

To install the above Type1 font collections from binary packages, run the following commands:

# pkg install urwfonts

Alternatively, to build from the Ports Collection, run the following commands:

# cd /usr/ports/x11-fonts/urwfonts
# make install clean

And likewise with the freefont or other collections. To have the X server detect these fonts, add an appropriate line to the X server configuration file (/etc/X11/xorg.conf), which reads:

FontPath "/usr/local/share/fonts/urwfonts/"

Alternatively, at the command line in the X session run:

% xset fp+ /usr/local/share/fonts/urwfonts
% xset fp rehash

This will work but will be lost when the X session is closed, unless it is added to the startup file (~/.xinitrc for a normal startx session, or ~/.xsession when logging in through a graphical login manager like XDM). A third way is to use the new /usr/local/etc/fonts/local.conf as demonstrated in Section 5.5.3, “Anti-Aliased Fonts”.

Xorg has built in support for rendering TrueType® fonts. There are two different modules that can enable this functionality. The freetype module is used in this example because it is more consistent with the other font rendering back-ends. To enable the freetype module just add the following line to the "Module" section of /etc/X11/xorg.conf.

Load  "freetype"

Now make a directory for the TrueType® fonts (for example, /usr/local/share/fonts/TrueType) and copy all of the TrueType® fonts into this directory. Keep in mind that TrueType® fonts cannot be directly taken from an Apple® Mac®; they must be in UNIX®/MS-DOS®/Windows® format for use by Xorg. Once the files have been copied into this directory, use mkfontdir to create a fonts.dir, so that the X font renderer knows that these new files have been installed. mkfontdir can be installed as a package:

# pkg install mkfontdir

Then create an index of X font files in a directory:

# cd /usr/local/share/fonts/TrueType
# mkfontdir

Now add the TrueType® directory to the font path. This is just the same as described in Section 5.5.1, “Type1 Fonts”:

% xset fp+ /usr/local/share/fonts/TrueType
% xset fp rehash

or add a FontPath line to xorg.conf.

Now Gimp, Apache OpenOffice, and all of the other X applications should now recognize the installed TrueType® fonts. Extremely small fonts (as with text in a high resolution display on a web page) and extremely large fonts (within StarOffice™) will look much better now.

All fonts in Xorg that are found in /usr/local/share/fonts/ and ~/.fonts/ are automatically made available for anti-aliasing to Xft-aware applications. Most recent applications are Xft-aware, including KDE, GNOME, and Firefox.

To control which fonts are anti-aliased, or to configure anti-aliasing properties, create (or edit, if it already exists) the file /usr/local/etc/fonts/local.conf. Several advanced features of the Xft font system can be tuned using this file; this section describes only some simple possibilities. For more details, please see fonts-conf(5).

This file must be in XML format. Pay careful attention to case, and make sure all tags are properly closed. The file begins with the usual XML header followed by a DOCTYPE definition, and then the <fontconfig> tag:

<?xml version="1.0"?>
      <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
      <fontconfig>

As previously stated, all fonts in /usr/local/share/fonts/ as well as ~/.fonts/ are already made available to Xft-aware applications. To add another directory outside of these two directory trees, add a line like this to /usr/local/etc/fonts/local.conf:

<dir>/path/to/my/fonts</dir>

After adding new fonts, and especially new font directories, rebuild the font caches:

# fc-cache -f

Anti-aliasing makes borders slightly fuzzy, which makes very small text more readable and removes “staircases” from large text, but can cause eyestrain if applied to normal text. To exclude font sizes smaller than 14 point from anti-aliasing, include these lines:

        <match target="font">
	    <test name="size" compare="less">
		<double>14</double>
	    </test>
	    <edit name="antialias" mode="assign">
		<bool>false</bool>
	    </edit>
	</match>
	<match target="font">
	    <test name="pixelsize" compare="less" qual="any">
		<double>14</double>
	    </test>
	    <edit mode="assign" name="antialias">
		<bool>false</bool>
	    </edit>
	</match>

Spacing for some monospaced fonts might also be inappropriate with anti-aliasing. This seems to be an issue with KDE, in particular. One possible fix is to force the spacing for such fonts to be 100. Add these lines:

	<match target="pattern" name="family">
	   <test qual="any" name="family">
	       <string>fixed</string>
	   </test>
	   <edit name="family" mode="assign">
	       <string>mono</string>
	   </edit>
	</match>
	<match target="pattern" name="family">
	    <test qual="any" name="family">
		<string>console</string>
	    </test>
	    <edit name="family" mode="assign">
		<string>mono</string>
	    </edit>
	</match>

(this aliases the other common names for fixed fonts as "mono"), and then add:

         <match target="pattern" name="family">
	     <test qual="any" name="family">
		 <string>mono</string>
	     </test>
	     <edit name="spacing" mode="assign">
		 <int>100</int>
	     </edit>
	 </match>      

Certain fonts, such as Helvetica, may have a problem when anti-aliased. Usually this manifests itself as a font that seems cut in half vertically. At worst, it may cause applications to crash. To avoid this, consider adding the following to local.conf:

         <match target="pattern" name="family">
	     <test qual="any" name="family">
		 <string>Helvetica</string>
	     </test>
	     <edit name="family" mode="assign">
		 <string>sans-serif</string>
	     </edit>
	 </match>        

After editing local.conf, make certain to end the file with the </fontconfig> tag. Not doing this will cause changes to be ignored.

Users can add personalized settings by creating their own ~/.config/fontconfig/fonts.conf. This file uses the same XML format described above.

One last point: with an LCD screen, sub-pixel sampling may be desired. This basically treats the (horizontally separated) red, green and blue components separately to improve the horizontal resolution; the results can be dramatic. To enable this, add the line somewhere in local.conf:

	 <match target="font">
	     <test qual="all" name="rgba">
		 <const>unknown</const>
	     </test>
	     <edit name="rgba" mode="assign">
		 <const>rgb</const>
	     </edit>
	 </match>