Task

All Superinterfaces:

Comparable<Task>, ExtensionAware

All Known Subinterfaces:

ObjectFilesToBinary

All Known Implementing Classes:

AbstractArchiveTask, AbstractCompile, AbstractCopyTask, AbstractDependencyReportTask, AbstractExecTask, AbstractLinkTask, AbstractNativeCompileTask, AbstractNativePCHCompileTask, AbstractNativeSourceCompileTask, AbstractPublishToMaven, AbstractReportTask, AbstractScalaCompile, org.gradle.api.internal.AbstractTask, AbstractTestTask, AntlrTask, AntTarget, ApiJar, Assemble, BrowserEvaluate, BuildEnvironmentReportTask, CCompile, Checkstyle, CodeNarc, CoffeeScriptCompile, CompareGradleBuilds, ComponentReport, org.gradle.api.internal.ConventionTask, Copy, CppCompile, CppPreCompiledHeaderCompile, CPreCompiledHeaderCompile, CreateStartScripts, CreateStartScripts, CreateStaticLibrary, DefaultTask, Delete, DependencyInsightReportTask, DependencyReportTask, DependentComponentsReport, Ear, Exec, ExtractSymbols, FindBugs, GenerateBuildDashboard, GenerateCUnitLauncher, GenerateEclipseClasspath, GenerateEclipseJdt, GenerateEclipseProject, GenerateEclipseWtpComponent, GenerateEclipseWtpFacet, GenerateFiltersFileTask, GenerateIdeaModule, GenerateIdeaProject, GenerateIdeaWorkspace, GenerateIvyDescriptor, GenerateMavenPom, GenerateModuleMetadata, GeneratePluginDescriptors, GenerateProjectFileTask, GenerateSchemeFileTask, GenerateSolutionFileTask, GenerateSwiftPackageManagerManifest, GenerateWorkspaceSettingsFileTask, GenerateXcodeProjectFileTask, GenerateXcodeWorkspaceFileTask, GeneratorTask, GradleBuild, GroovyCompile, Groovydoc, HtmlDependencyReportTask, InitBuild, InstallExecutable, InstallXCTestBundle, JacocoBase, JacocoCoverageVerification, JacocoMerge, JacocoReport, JacocoReportBase, Jar, Jar, JavaCompile, Javadoc, JavaExec, JavaScriptMinify, JDepend, JsHint, LinkExecutable, LinkMachOBundle, LinkSharedLibrary, ModelReport, ObjectiveCCompile, ObjectiveCppCompile, ObjectiveCppPreCompiledHeaderCompile, ObjectiveCPreCompiledHeaderCompile, PlatformJavaCompile, PlatformScalaCompile, PlayCoffeeScriptCompile, PlayRun, PluginUnderTestMetadata, Pmd, PrefixHeaderFileGenerateTask, ProcessResources, ProjectReportTask, PropertiesGeneratorTask, PropertyListGeneratorTask, PropertyReportTask, PublishToIvyRepository, PublishToMavenLocal, PublishToMavenRepository, RhinoShellExec, RoutesCompile, RunTestExecutable, ScalaCompile, ScalaDoc, Sign, SourceTask, StripSymbols, SwiftCompile, Sync, Tar, TaskReportTask, Test, TestReport, TwirlCompile, UnexportMainSymbol, Upload, ValidateTaskProperties, War, WindowsResourceCompile, Wrapper, WriteProperties, XCTest, XmlGeneratorTask, Zip
```
public interface Task
extends Comparable<Task>, ExtensionAware
```
A Task represents a single atomic piece of work for a build, such as compiling classes or generating javadoc.

Each task belongs to a Project. You can use the various methods on TaskContainer to create and lookup task instances. For example, TaskContainer.create(String) creates an empty task with the given name. You can also use the task keyword in your build file:
```
 task myTask
 task myTask { configure closure }
 task myTask(type: SomeType)
 task myTask(type: SomeType) { configure closure }
 
```
Each task has a name, which can be used to refer to the task within its owning project, and a fully qualified path, which is unique across all tasks in all projects. The path is the concatenation of the owning project's path and the task's name. Path elements are separated using the ":" character.

Task Actions

A Task is made up of a sequence of Action objects. When the task is executed, each of the actions is executed in turn, by calling Action.execute(T). You can add actions to a task by calling doFirst(Action) or doLast(Action).

Groovy closures can also be used to provide a task action. When the action is executed, the closure is called with the task as parameter. You can add action closures to a task by calling doFirst(groovy.lang.Closure) or doLast(groovy.lang.Closure).

There are 2 special exceptions which a task action can throw to abort execution and continue without failing the build. A task action can abort execution of the action and continue to the next action of the task by throwing a StopActionException. A task action can abort execution of the task and continue to the next task by throwing a StopExecutionException. Using these exceptions allows you to have precondition actions which skip execution of the task, or part of the task, if not true.

Task Dependencies and Task Ordering

A task may have dependencies on other tasks or might be scheduled to always run after another task. Gradle ensures that all task dependencies and ordering rules are honored when executing tasks, so that the task is executed after all of its dependencies and any "must run after" tasks have been executed.

Dependencies to a task are controlled using dependsOn(Object...) or setDependsOn(Iterable), and mustRunAfter(Object...), setMustRunAfter(Iterable), shouldRunAfter(Object...) and setShouldRunAfter(Iterable) are used to specify ordering between tasks. You can use objects of any of the following types to specify dependencies and ordering:
- A String, CharSequence or groovy.lang.GString task path or name. A relative path is interpreted relative to the task's Project. This allows you to refer to tasks in other projects.
- A Task.
- A closure. The closure may take a Task as parameter. It may return any of the types listed here. Its return value is recursively converted to tasks. A null return value is treated as an empty collection.
- A TaskDependency object.
- A TaskReference object.
- A Buildable object.
- A RegularFileProperty or DirectoryProperty.
- A Provider object. May contain any of the types listed here.
- A Iterable, Collection, Map or array. May contain any of the types listed here. The elements of the iterable/collection/map/array are recursively converted to tasks.
- A Callable. The call() method may return any of the types listed here. Its return value is recursively converted to tasks. A null return value is treated as an empty collection.
- Anything else is treated as a failure.
Using a Task in a Build File

Dynamic Properties

A Task has 4 'scopes' for properties. You can access these properties by name from the build file or by calling the property(String) method. You can change the value of these properties by calling the setProperty(String, Object) method.
- The Task object itself. This includes any property getters and setters declared by the Task implementation class. The properties of this scope are readable or writable based on the presence of the corresponding getter and setter methods.
- The extensions added to the task by plugins. Each extension is available as a read-only property with the same name as the extension.
- The convention properties added to the task by plugins. A plugin can add properties and methods to a task through the task's Convention object. The properties of this scope may be readable or writable, depending on the convention objects.
- The extra properties of the task. Each task object maintains a map of additional properties. These are arbitrary name -> value pairs which you can use to dynamically add properties to a task object. Once defined, the properties of this scope are readable and writable.
Dynamic Methods

A Plugin may add methods to a Task using its Convention object.

Parallel Execution

By default, tasks are not executed in parallel unless a task is waiting on asynchronous work and another task (which is not dependent) is ready to execute. Parallel execution can be enabled by the --parallel flag when the build is initiated. In parallel mode, the tasks of different projects (i.e. in a multi project build) are able to be executed in parallel.

Nested Class Summary

Nested Classes
Modifier and Type Interface Description

static class Task.Namer
A Namer namer for tasks that returns getName().

Nested Classes
Modifier and Type	Interface	Description
`static class`	`Task.Namer`	A `Namer` namer for tasks that returns `getName()`.

Field Summary

Fields
Modifier and Type	Field	Description
`static String`	`TASK_ACTION`
`static String`	`TASK_CONSTRUCTOR_ARGS`	Constructor arguments for the Task
`static String`	`TASK_DEPENDS_ON`
`static String`	`TASK_DESCRIPTION`
`static String`	`TASK_GROUP`
`static String`	`TASK_NAME`
`static String`	`TASK_OVERWRITE`
`static String`	`TASK_TYPE`

Method Summary

All Methods Instance Methods Abstract Methods
Modifier and Type	Method	Description
`Task`	`configure(Closure configureClosure)`	Applies the statements of the closure against this task object.
`Task`	`dependsOn(Object... paths)`	Adds the given dependencies to this task.
`Task`	`doFirst(Closure action)`	Adds the given closure to the beginning of this task's action list.
`Task`	`doFirst(String actionName, Action<? super Task> action)`	Adds the given `Action` to the beginning of this task's action list.
`Task`	`doFirst(Action<? super Task> action)`	Adds the given `Action` to the beginning of this task's action list.
`Task`	`doLast(Closure action)`	Adds the given closure to the end of this task's action list.
`Task`	`doLast(String actionName, Action<? super Task> action)`	Adds the given `Action` to the end of this task's action list.
`Task`	`doLast(Action<? super Task> action)`	Adds the given `Action` to the end of this task's action list.
`Task`	`finalizedBy(Object... paths)`	Adds the given finalizer tasks for this task.
`List<Action<? super Task>>`	`getActions()`	Returns the sequence of `Action` objects which will be executed by this task, in the order of execution.
`AntBuilder`	`getAnt()`	Returns the `AntBuilder` for this task.
`Convention`	`getConvention()`	Returns the `Convention` object for this task.
`Set<Object>`	`getDependsOn()`	Returns the dependencies of this task.
`String`	`getDescription()`	Returns the description of this task.
`TaskDestroyables`	`getDestroyables()`	Returns the destroyables of this task.
`boolean`	`getDidWork()`	Checks if the task actually did any work.
`boolean`	`getEnabled()`	Returns if this task is enabled or not.
`TaskDependency`	`getFinalizedBy()`	Returns tasks that finalize this task.
`String`	`getGroup()`	Returns the task group which this task belongs to.
`TaskInputs`	`getInputs()`	Returns the inputs of this task.
`TaskLocalState`	`getLocalState()`	Returns the local state of this task.
`Logger`	`getLogger()`	Returns the logger for this task.
`LoggingManager`	`getLogging()`	Returns the `LoggingManager` which can be used to receive logging and to control the standard output/error capture for this task.
`TaskDependency`	`getMustRunAfter()`	Returns tasks that this task must run after.
`String`	`getName()`	Returns the name of this task.
`TaskOutputs`	`getOutputs()`	Returns the outputs of this task.
`String`	`getPath()`	Returns the path of the task, which is a fully qualified name for the task.
`Project`	`getProject()`	Returns the `Project` which this task belongs to.
`TaskDependency`	`getShouldRunAfter()`	Returns tasks that this task should run after.
`TaskState`	`getState()`	Returns the execution state of this task.
`TaskDependency`	`getTaskDependencies()`	Returns a `TaskDependency` which contains all the tasks that this task depends on.
`File`	`getTemporaryDir()`	Returns a directory which this task can use to write temporary files to.
`Property<Duration>`	`getTimeout()`	The timeout of this task.
`boolean`	`hasProperty(String propertyName)`	Determines if this task has the given property.
`Task`	`mustRunAfter(Object... paths)`	Specifies that this task must run after all of the supplied tasks.
`void`	`onlyIf(Closure onlyIfClosure)`	Execute the task only if the given closure returns true.
`void`	`onlyIf(Spec<? super Task> onlyIfSpec)`	Execute the task only if the given spec is satisfied.
`Object`	`property(String propertyName)`	Returns the value of the given property of this task.
`void`	`setActions(List<Action<? super Task>> actions)`	Sets the sequence of `Action` objects which will be executed by this task.
`void`	`setDependsOn(Iterable<?> dependsOnTasks)`	Sets the dependencies of this task.
`void`	`setDescription(String description)`	Sets a description for this task.
`void`	`setDidWork(boolean didWork)`	Sets whether the task actually did any work.
`void`	`setEnabled(boolean enabled)`	Set the enabled state of a task.
`void`	`setFinalizedBy(Iterable<?> finalizedBy)`	Specifies the set of finalizer tasks for this task.
`void`	`setGroup(String group)`	Sets the task group which this task belongs to.
`void`	`setMustRunAfter(Iterable<?> mustRunAfter)`	Specifies the set of tasks that this task must run after.
`void`	`setOnlyIf(Closure onlyIfClosure)`	Execute the task only if the given closure returns true.
`void`	`setOnlyIf(Spec<? super Task> onlyIfSpec)`	Execute the task only if the given spec is satisfied.
`void`	`setProperty(String name, Object value)`	Sets a property of this task.
`void`	`setShouldRunAfter(Iterable<?> shouldRunAfter)`	Specifies the set of tasks that this task should run after.
`TaskDependency`	`shouldRunAfter(Object... paths)`	Specifies that this task should run after all of the supplied tasks.

Methods inherited from interface java.lang.Comparable
compareTo

Methods inherited from interface org.gradle.api.plugins.ExtensionAware
getExtensions

- Field Detail
  - TASK_NAME
```
static final String TASK_NAME
```
    See Also:
    
    Constant Field Values
  - TASK_DESCRIPTION
```
static final String TASK_DESCRIPTION
```
    See Also:
    
    Constant Field Values
  - TASK_GROUP
```
static final String TASK_GROUP
```
    See Also:
    
    Constant Field Values
  - TASK_TYPE
```
static final String TASK_TYPE
```
    See Also:
    
    Constant Field Values
  - TASK_DEPENDS_ON
```
static final String TASK_DEPENDS_ON
```
    See Also:
    
    Constant Field Values
  - TASK_OVERWRITE
```
static final String TASK_OVERWRITE
```
    See Also:
    
    Constant Field Values
  - TASK_ACTION
```
static final String TASK_ACTION
```
    See Also:
    
    Constant Field Values
  - TASK_CONSTRUCTOR_ARGS
```
@Incubating
static final String TASK_CONSTRUCTOR_ARGS
```
    Constructor arguments for the Task
    
    Since:
    
    4.7
    
    See Also:
    
    Constant Field Values
- Method Detail
  - getName
```
@Internal
String getName()
```
    Returns the name of this task. The name uniquely identifies the task within its Project.
    
    Returns:
    
    The name of the task. Never returns null.
  - getProject
```
@Internal
Project getProject()
```
    Returns the Project which this task belongs to.
    
    Returns:
    
    The project this task belongs to. Never returns null.
  - getActions
```
@Internal
List<Action<? super Task>> getActions()
```
    Returns the sequence of Action objects which will be executed by this task, in the order of execution.
    
    Returns:
    
    The task actions in the order they are executed. Returns an empty list if this task has no actions.
  - setActions
```
void setActions(List<Action<? super Task>> actions)
```
    Sets the sequence of Action objects which will be executed by this task.
    
    Parameters:
    
    actions - The actions.
  - getTaskDependencies
```
@Internal
TaskDependency getTaskDependencies()
```
    Returns a TaskDependency which contains all the tasks that this task depends on.
    
    Returns:
    
    The dependencies of this task. Never returns null.
  - getDependsOn
```
@Internal
Set<Object> getDependsOn()
```
    Returns the dependencies of this task.
    
    Returns:
    
    The dependencies of this task. Returns an empty set if this task has no dependencies.
  - setDependsOn
```
void setDependsOn(Iterable<?> dependsOnTasks)
```
    Sets the dependencies of this task. See here for a description of the types of objects which can be used as task dependencies.
    
    Parameters:
    
    dependsOnTasks - The set of task paths.
  - dependsOn
```
Task dependsOn(Object... paths)
```
    Adds the given dependencies to this task. See here for a description of the types of objects which can be used as task dependencies.
    
    Parameters:
    
    paths - The dependencies to add to this task.
    
    Returns:
    
    the task object this method is applied to
  - onlyIf
```
void onlyIf(Closure onlyIfClosure)
```
    Execute the task only if the given closure returns true. The closure will be evaluated at task execution time, not during configuration. The closure will be passed a single parameter, this task. If the closure returns false, the task will be skipped.
    
    You may add multiple such predicates. The task is skipped if any of the predicates return false.
    
    Typical usage:myTask.onlyIf { isProductionEnvironment() }
    
    Parameters:
    
    onlyIfClosure - code to execute to determine if task should be run
  - onlyIf
```
void onlyIf(Spec<? super Task> onlyIfSpec)
```
    Execute the task only if the given spec is satisfied. The spec will be evaluated at task execution time, not during configuration. If the Spec is not satisfied, the task will be skipped.
    
    You may add multiple such predicates. The task is skipped if any of the predicates return false.
    
    Typical usage (from Java):
```
myTask.onlyIf(new Spec<Task>() {
    boolean isSatisfiedBy(Task task) {
       return isProductionEnvironment();
    }
 });
 
```
    Parameters:
    
    onlyIfSpec - specifies if a task should be run
  - setOnlyIf
```
void setOnlyIf(Closure onlyIfClosure)
```
    Execute the task only if the given closure returns true. The closure will be evaluated at task execution time, not during configuration. The closure will be passed a single parameter, this task. If the closure returns false, the task will be skipped.
    
    The given predicate replaces all such predicates for this task.
    
    Parameters:
    
    onlyIfClosure - code to execute to determine if task should be run
  - setOnlyIf
```
void setOnlyIf(Spec<? super Task> onlyIfSpec)
```
    Execute the task only if the given spec is satisfied. The spec will be evaluated at task execution time, not during configuration. If the Spec is not satisfied, the task will be skipped.
    
    The given predicate replaces all such predicates for this task.
    
    Parameters:
    
    onlyIfSpec - specifies if a task should be run
  - getState
```
@Internal
TaskState getState()
```
    Returns the execution state of this task. This provides information about the execution of this task, such as whether it has executed, been skipped, has failed, etc.
    
    Returns:
    
    The execution state of this task. Never returns null.
  - setDidWork
```
void setDidWork(boolean didWork)
```
    Sets whether the task actually did any work. Most built-in tasks will set this automatically, but it may be useful to manually indicate this for custom user tasks.
    
    Parameters:
    
    didWork - indicates if the task did any work
  - getDidWork
```
@Internal
boolean getDidWork()
```
    Checks if the task actually did any work. Even if a Task executes, it may determine that it has nothing to do. For example, a compilation task may determine that source files have not changed since the last time a the task was run.
    
    Returns:
    
    true if this task did any work
  - getPath
```
@Internal
String getPath()
```
    Returns the path of the task, which is a fully qualified name for the task. The path of a task is the path of its Project plus the name of the task, separated by :.
    
    Returns:
    
    the path of the task, which is equal to the path of the project plus the name of the task.
  - doFirst
```
Task doFirst(Action<? super Task> action)
```
    Adds the given Action to the beginning of this task's action list.
    
    Parameters:
    
    action - The action to add
    
    Returns:
    
    the task object this method is applied to
  - doFirst
```
Task doFirst(Closure action)
```
    Adds the given closure to the beginning of this task's action list. The closure is passed this task as a parameter when executed.
    
    Parameters:
    
    action - The action closure to execute.
    
    Returns:
    
    This task.
  - doFirst
```
@Incubating
Task doFirst(String actionName,
             Action<? super Task> action)
```
    Adds the given Action to the beginning of this task's action list.
    
    Parameters:
    
    actionName - An arbitrary string that is used for logging.
    
    action - The action to add
    
    Returns:
    
    the task object this method is applied to
    
    Since:
    
    4.2
  - doLast
```
Task doLast(Action<? super Task> action)
```
    Adds the given Action to the end of this task's action list.
    
    Parameters:
    
    action - The action to add.
    
    Returns:
    
    the task object this method is applied to
  - doLast
```
@Incubating
Task doLast(String actionName,
            Action<? super Task> action)
```
    Adds the given Action to the end of this task's action list.
    
    Parameters:
    
    actionName - An arbitrary string that is used for logging.
    
    action - The action to add.
    
    Returns:
    
    the task object this method is applied to
    
    Since:
    
    4.2
  - doLast
```
Task doLast(Closure action)
```
    Adds the given closure to the end of this task's action list. The closure is passed this task as a parameter when executed.
    
    Parameters:
    
    action - The action closure to execute.
    
    Returns:
    
    This task.
  - getEnabled
```
@Internal
boolean getEnabled()
```
    Returns if this task is enabled or not.
    
    See Also:
    
    setEnabled(boolean)
  - setEnabled
```
void setEnabled(boolean enabled)
```
    Set the enabled state of a task. If a task is disabled none of the its actions are executed. Note that disabling a task does not prevent the execution of the tasks which this task depends on.
    
    Parameters:
    
    enabled - The enabled state of this task (true or false)
  - configure
```
Task configure(Closure configureClosure)
```
    Applies the statements of the closure against this task object. The delegate object for the closure is set to this task.
    
    Parameters:
    
    configureClosure - The closure to be applied (can be null).
    
    Returns:
    
    This task
  - getAnt
```
@Internal
AntBuilder getAnt()
```
    Returns the AntBuilder for this task. You can use this in your build file to execute ant tasks.
    
    Returns:
    
    The AntBuilder
  - getLogger
```
@Internal
Logger getLogger()
```
    Returns the logger for this task. You can use this in your build file to write log messages.
    
    Returns:
    
    The logger. Never returns null.
  - getLogging
```
@Internal
LoggingManager getLogging()
```
    Returns the LoggingManager which can be used to receive logging and to control the standard output/error capture for this task. By default, System.out is redirected to the Gradle logging system at the QUIET log level, and System.err is redirected at the ERROR log level.
    
    Returns:
    
    the LoggingManager. Never returns null.
  - property
```
@Nullable
Object property(String propertyName)
         throws MissingPropertyException
```
    Returns the value of the given property of this task. This method locates a property as follows:
    1. If this task object has a property with the given name, return the value of the property.
    2. If this task has an extension with the given name, return the extension.
    3. If this task's convention object has a property with the given name, return the value of the property.
    4. If this task has an extra property with the given name, return the value of the property.
    5. If not found, throw MissingPropertyException
    Parameters:
    
    propertyName - The name of the property.
    
    Returns:
    
    The value of the property, possibly null.
    
    Throws:
    
    MissingPropertyException - When the given property is unknown.
  - hasProperty
```
boolean hasProperty(String propertyName)
```
    Determines if this task has the given property. See here for details of the properties which are available for a task.
    
    Parameters:
    
    propertyName - The name of the property to locate.
    
    Returns:
    
    True if this project has the given property, false otherwise.
  - setProperty
```
void setProperty(String name,
                 Object value)
          throws MissingPropertyException
```
    Sets a property of this task. This method searches for a property with the given name in the following locations, and sets the property on the first location where it finds the property.
    1. The task object itself. For example, the enabled project property.
    2. The task's convention object.
    3. The task's extra properties.
    If the property is not found, a MissingPropertyException is thrown.
    Parameters:
    
    name - The name of the property
    
    value - The value of the property
    
    Throws:
    
    MissingPropertyException
  - getConvention
```
@Internal
Convention getConvention()
```
    Returns the Convention object for this task. A Plugin can use the convention object to contribute properties and methods to this task.
    
    Returns:
    
    The convention object. Never returns null.
  - getDescription
```
@Internal
@Nullable
String getDescription()
```
    Returns the description of this task.
    
    Returns:
    
    the description. May return null.
  - setDescription
```
void setDescription(@Nullable
                    String description)
```
    Sets a description for this task. This should describe what the task does to the user of the build. The description will be displayed when gradle tasks is called.
    
    Parameters:
    
    description - The description of the task. Might be null.
  - getGroup
```
@Internal
@Nullable
String getGroup()
```
    Returns the task group which this task belongs to. The task group is used in reports and user interfaces to group related tasks together when presenting a list of tasks to the user.
    
    Returns:
    
    The task group for this task. Might be null.
  - setGroup
```
void setGroup(@Nullable
              String group)
```
    Sets the task group which this task belongs to. The task group is used in reports and user interfaces to group related tasks together when presenting a list of tasks to the user.
    
    Parameters:
    
    group - The task group for this task. Can be null.
  - getInputs
```
@Internal
TaskInputs getInputs()
```
    Returns the inputs of this task.
    
    Returns:
    
    The inputs. Never returns null.
  - getOutputs
```
@Internal
TaskOutputs getOutputs()
```
    Returns the outputs of this task.
    
    Returns:
    
    The outputs. Never returns null.
  - getDestroyables
```
@Internal
TaskDestroyables getDestroyables()
```
    Returns the destroyables of this task.
    
    Returns:
    
    The destroyables. Never returns null.
    
    Since:
    
    4.0
  - getLocalState
```
@Internal
TaskLocalState getLocalState()
```
    Returns the local state of this task.
    
    Since:
    
    4.3
  - getTemporaryDir
```
@Internal
File getTemporaryDir()
```
    Returns a directory which this task can use to write temporary files to. Each task instance is provided with a separate temporary directory. There are no guarantees that the contents of this directory will be kept beyond the execution of the task.
    
    Returns:
    
    The directory. Never returns null. The directory will already exist.
  - mustRunAfter
```
Task mustRunAfter(Object... paths)
```
    Specifies that this task must run after all of the supplied tasks.
```
 task taskY {
     mustRunAfter "taskX"
 }
 
```
    For each supplied task, this action adds a task 'ordering', and does not specify a 'dependency' between the tasks. As such, it is still possible to execute 'taskY' without first executing the 'taskX' in the example.
    
    See here for a description of the types of objects which can be used to specify an ordering relationship.
    Parameters:
    
    paths - The tasks this task must run after.
    
    Returns:
    
    the task object this method is applied to
  - setMustRunAfter
```
void setMustRunAfter(Iterable<?> mustRunAfter)
```
    Specifies the set of tasks that this task must run after.
```
 task taskY {
     mustRunAfter = ["taskX1", "taskX2"]
 }
 
```
    For each supplied task, this action adds a task 'ordering', and does not specify a 'dependency' between the tasks. As such, it is still possible to execute 'taskY' without first executing the 'taskX' in the example.
    
    See here for a description of the types of objects which can be used to specify an ordering relationship.
    Parameters:
    
    mustRunAfter - The set of task paths this task must run after.
  - getMustRunAfter
```
@Internal
TaskDependency getMustRunAfter()
```
    Returns tasks that this task must run after.
    
    Returns:
    
    The tasks that this task must run after. Returns an empty set if this task has no tasks it must run after.
  - finalizedBy
```
Task finalizedBy(Object... paths)
```
    Adds the given finalizer tasks for this task.
```
 task taskY {
     finalizedBy "taskX"
 }
 
```
    See here for a description of the types of objects which can be used to specify a finalizer task.
    Parameters:
    
    paths - The tasks that finalize this task.
    
    Returns:
    
    the task object this method is applied to
  - setFinalizedBy
```
void setFinalizedBy(Iterable<?> finalizedBy)
```
    Specifies the set of finalizer tasks for this task.
```
 task taskY {
     finalizedBy = ["taskX1", "taskX2"]
 }
 
```
    See here for a description of the types of objects which can be used to specify a finalizer task.
    Parameters:
    
    finalizedBy - The tasks that finalize this task.
  - getFinalizedBy
```
@Internal
TaskDependency getFinalizedBy()
```
    Returns tasks that finalize this task.
    
    Returns:
    
    The tasks that finalize this task. Returns an empty set if there are no finalising tasks for this task.
  - shouldRunAfter
```
TaskDependency shouldRunAfter(Object... paths)
```
    Specifies that this task should run after all of the supplied tasks.
```
 task taskY {
     shouldRunAfter "taskX"
 }
 
```
    For each supplied task, this action adds a task 'ordering', and does not specify a 'dependency' between the tasks. As such, it is still possible to execute 'taskY' without first executing the 'taskX' in the example.
    
    See here for a description of the types of objects which can be used to specify an ordering relationship.
    Parameters:
    
    paths - The tasks this task should run after.
    
    Returns:
    
    the task object this method is applied to
  - setShouldRunAfter
```
void setShouldRunAfter(Iterable<?> shouldRunAfter)
```
    Specifies the set of tasks that this task should run after.
```
 task taskY {
     shouldRunAfter = ["taskX1", "taskX2"]
 }
 
```
    For each supplied task, this action adds a task 'ordering', and does not specify a 'dependency' between the tasks. As such, it is still possible to execute 'taskY' without first executing the 'taskX' in the example.
    
    See here for a description of the types of objects which can be used to specify an ordering relationship.
    Parameters:
    
    shouldRunAfter - The set of task paths this task should run after.
  - getShouldRunAfter
```
@Internal
TaskDependency getShouldRunAfter()
```
    Returns tasks that this task should run after.
    
    Returns:
    
    The tasks that this task should run after. Returns an empty set if this task has no tasks it must run after.
  - getTimeout
```
@Internal
@Optional
@Incubating
Property<Duration> getTimeout()
```
    The timeout of this task.
```
   task myTask {
       timeout = Duration.ofMinutes(10)
   }
 
```
    The Thread executing this task will be interrupted if the task takes longer than the specified amount of time to run. In order for a task to work properly with this feature, it needs to react to interrupts and must clean up any resources it opened.
    
    By default, tasks never time out.
    Since:
    
    5.0

Interface Task

Task Actions

Task Dependencies and Task Ordering

Using a Task in a Build File

Dynamic Properties

Dynamic Methods

Parallel Execution

Nested Class Summary

Field Summary

Method Summary

Methods inherited from interface java.lang.Comparable

Methods inherited from interface org.gradle.api.plugins.ExtensionAware

Field Detail

TASK_NAME

TASK_DESCRIPTION

TASK_GROUP

TASK_TYPE

TASK_DEPENDS_ON

TASK_OVERWRITE

TASK_ACTION

TASK_CONSTRUCTOR_ARGS

Method Detail

getName

getProject

getActions

setActions

getTaskDependencies

getDependsOn

setDependsOn

dependsOn

onlyIf

onlyIf

setOnlyIf

setOnlyIf

getState

setDidWork

getDidWork

getPath

doFirst

doFirst

doFirst

doLast

doLast

doLast

getEnabled

setEnabled

configure

getAnt

getLogger

getLogging

property

hasProperty

setProperty

getConvention

getDescription

setDescription

getGroup

setGroup

getInputs

getOutputs

getDestroyables

getLocalState

getTemporaryDir

mustRunAfter

setMustRunAfter

getMustRunAfter

finalizedBy

setFinalizedBy

getFinalizedBy

shouldRunAfter

setShouldRunAfter

getShouldRunAfter

getTimeout