java.lang.Object
- javafx.animation.Animation
- - javafx.animation.Transition
  - - javafx.animation.ScaleTransition

```
public final class ScaleTransition
extends Transition
```
This Transition creates a scale animation that spans its duration. This is done by updating the scaleX, scaleY and scaleZ variables of the node at regular interval.
It starts from the (fromX, fromY, fromZ) value if provided else uses the node's (scaleX, scaleY, scaleZ) value.
It stops at the (toX, toY, toZ) value if provided else it will use start value plus (byX, byY, byZ) value.
The (toX, toY, toZ) value takes precedence if both ( toX, toY, toZ) and (byX, byY, byZ) values are specified.
Code Segment Example:
```
 
 import javafx.scene.shape.*;
 import javafx.animation.*;

 ...

     Rectangle rect = new Rectangle (100, 40, 100, 100);
     rect.setArcHeight(50);
     rect.setArcWidth(50);
     rect.setFill(Color.VIOLET);

     ScaleTransition st = new ScaleTransition(Duration.millis(2000), rect);
     st.setByX(1.5f);
     st.setByY(1.5f);
     st.setCycleCount(4f);
     st.setAutoReverse(true);

     st.play();

 ...

 
 
```
Since:

JavaFX 2.0

See Also:

Transition, Animation

Property Summary

Properties
Type	Property	Description
`DoubleProperty`	`byX`	Specifies the incremented stop X scale value, from the start, of this `ScaleTransition`.
`DoubleProperty`	`byY`	Specifies the incremented stop Y scale value, from the start, of this `ScaleTransition`.
`DoubleProperty`	`byZ`	Specifies the incremented stop Z scale value, from the start, of this `ScaleTransition`.
`ObjectProperty<Duration>`	`duration`	The duration of this `ScaleTransition`.
`DoubleProperty`	`fromX`	Specifies the start X scale value of this `ScaleTransition`.
`DoubleProperty`	`fromY`	Specifies the start Y scale value of this `ScaleTransition`.
`DoubleProperty`	`fromZ`	Specifies the start Z scale value of this `ScaleTransition`.
`ObjectProperty<Node>`	`node`	The target node of this `ScaleTransition`.
`DoubleProperty`	`toX`	Specifies the stop X scale value of this `ScaleTransition`.
`DoubleProperty`	`toY`	The stop Y scale value of this `ScaleTransition`.
`DoubleProperty`	`toZ`	The stop Z scale value of this `ScaleTransition`.

Properties inherited from class javafx.animation.Animation
autoReverse, currentRate, currentTime, cycleCount, cycleDuration, delay, onFinished, rate, status, totalDuration

Properties inherited from class javafx.animation.Transition
interpolator

Nested Class Summary
- Nested classes/interfaces inherited from class javafx.animation.Animation
  Animation.Status

Field Summary
- Fields inherited from class javafx.animation.Animation
  INDEFINITE

Constructor Summary

Constructors
Constructor	Description
`ScaleTransition()`	The constructor of `ScaleTransition`
`ScaleTransition(Duration duration)`	The constructor of `ScaleTransition`
`ScaleTransition(Duration duration, Node node)`	The constructor of `ScaleTransition`

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`DoubleProperty`	`byXProperty()`	Specifies the incremented stop X scale value, from the start, of this `ScaleTransition`.
`DoubleProperty`	`byYProperty()`	Specifies the incremented stop Y scale value, from the start, of this `ScaleTransition`.
`DoubleProperty`	`byZProperty()`	Specifies the incremented stop Z scale value, from the start, of this `ScaleTransition`.
`ObjectProperty<Duration>`	`durationProperty()`	The duration of this `ScaleTransition`.
`DoubleProperty`	`fromXProperty()`	Specifies the start X scale value of this `ScaleTransition`.
`DoubleProperty`	`fromYProperty()`	Specifies the start Y scale value of this `ScaleTransition`.
`DoubleProperty`	`fromZProperty()`	Specifies the start Z scale value of this `ScaleTransition`.
`double`	`getByX()`	Gets the value of the property byX.
`double`	`getByY()`	Gets the value of the property byY.
`double`	`getByZ()`	Gets the value of the property byZ.
`Duration`	`getDuration()`	Gets the value of the property duration.
`double`	`getFromX()`	Gets the value of the property fromX.
`double`	`getFromY()`	Gets the value of the property fromY.
`double`	`getFromZ()`	Gets the value of the property fromZ.
`Node`	`getNode()`	Gets the value of the property node.
`double`	`getToX()`	Gets the value of the property toX.
`double`	`getToY()`	Gets the value of the property toY.
`double`	`getToZ()`	Gets the value of the property toZ.
`void`	`interpolate(double frac)`	The method `interpolate()` has to be provided by implementations of `Transition`.
`ObjectProperty<Node>`	`nodeProperty()`	The target node of this `ScaleTransition`.
`void`	`setByX(double value)`	Sets the value of the property byX.
`void`	`setByY(double value)`	Sets the value of the property byY.
`void`	`setByZ(double value)`	Sets the value of the property byZ.
`void`	`setDuration(Duration value)`	Sets the value of the property duration.
`void`	`setFromX(double value)`	Sets the value of the property fromX.
`void`	`setFromY(double value)`	Sets the value of the property fromY.
`void`	`setFromZ(double value)`	Sets the value of the property fromZ.
`void`	`setNode(Node value)`	Sets the value of the property node.
`void`	`setToX(double value)`	Sets the value of the property toX.
`void`	`setToY(double value)`	Sets the value of the property toY.
`void`	`setToZ(double value)`	Sets the value of the property toZ.
`DoubleProperty`	`toXProperty()`	Specifies the stop X scale value of this `ScaleTransition`.
`DoubleProperty`	`toYProperty()`	The stop Y scale value of this `ScaleTransition`.
`DoubleProperty`	`toZProperty()`	The stop Z scale value of this `ScaleTransition`.

Methods inherited from class javafx.animation.Animation
autoReverseProperty, currentRateProperty, currentTimeProperty, cycleCountProperty, cycleDurationProperty, delayProperty, getCuePoints, getCurrentRate, getCurrentTime, getCycleCount, getCycleDuration, getDelay, getOnFinished, getRate, getStatus, getTargetFramerate, getTotalDuration, isAutoReverse, jumpTo, jumpTo, onFinishedProperty, pause, play, playFrom, playFrom, playFromStart, rateProperty, setAutoReverse, setCycleCount, setCycleDuration, setDelay, setOnFinished, setRate, setStatus, statusProperty, stop, totalDurationProperty

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Methods inherited from class javafx.animation.Transition
getCachedInterpolator, getInterpolator, getParentTargetNode, interpolatorProperty, setInterpolator

- Property Detail
  - node
```
public final ObjectProperty<Node> nodeProperty
```
    The target node of this ScaleTransition.
    It is not possible to change the target node of a running ScaleTransition. If the value of node is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    See Also:
    
    getNode(), setNode(Node)
  - duration
```
public final ObjectProperty<Duration> durationProperty
```
    The duration of this ScaleTransition.
    It is not possible to change the duration of a running ScaleTransition. If the value of duration is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.
    
    Default value:
    
    400ms
    
    See Also:
    
    getDuration(), setDuration(Duration)
  - fromX
```
public final DoubleProperty fromXProperty
```
    Specifies the start X scale value of this ScaleTransition.
    It is not possible to change fromX of a running ScaleTransition. If the value of fromX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getFromX(), setFromX(double)
  - fromY
```
public final DoubleProperty fromYProperty
```
    Specifies the start Y scale value of this ScaleTransition.
    It is not possible to change fromY of a running ScaleTransition. If the value of fromY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getFromY(), setFromY(double)
  - fromZ
```
public final DoubleProperty fromZProperty
```
    Specifies the start Z scale value of this ScaleTransition.
    It is not possible to change fromZ of a running ScaleTransition. If the value of fromZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getFromZ(), setFromZ(double)
  - toX
```
public final DoubleProperty toXProperty
```
    Specifies the stop X scale value of this ScaleTransition.
    It is not possible to change toX of a running ScaleTransition. If the value of toX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getToX(), setToX(double)
  - toY
```
public final DoubleProperty toYProperty
```
    The stop Y scale value of this ScaleTransition.
    It is not possible to change toY of a running ScaleTransition. If the value of toY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getToY(), setToY(double)
  - toZ
```
public final DoubleProperty toZProperty
```
    The stop Z scale value of this ScaleTransition.
    It is not possible to change toZ of a running ScaleTransition. If the value of toZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getToZ(), setToZ(double)
  - byX
```
public final DoubleProperty byXProperty
```
    Specifies the incremented stop X scale value, from the start, of this ScaleTransition.
    It is not possible to change byX of a running ScaleTransition. If the value of byX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    See Also:
    
    getByX(), setByX(double)
  - byY
```
public final DoubleProperty byYProperty
```
    Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.
    It is not possible to change byY of a running ScaleTransition. If the value of byY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    See Also:
    
    getByY(), setByY(double)
  - byZ
```
public final DoubleProperty byZProperty
```
    Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.
    It is not possible to change byZ of a running ScaleTransition. If the value of byZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    See Also:
    
    getByZ(), setByZ(double)
- Constructor Detail
  - ScaleTransition
```
public ScaleTransition(Duration duration,
                       Node node)
```
    The constructor of ScaleTransition
    
    Parameters:
    
    duration - The duration of the ScaleTransition
    
    node - The node which will be scaled
  - ScaleTransition
```
public ScaleTransition(Duration duration)
```
    The constructor of ScaleTransition
    
    Parameters:
    
    duration - The duration of the ScaleTransition
  - ScaleTransition
```
public ScaleTransition()
```
    The constructor of ScaleTransition
- Method Detail
  - setNode
```
public final void setNode(Node value)
```
    Sets the value of the property node.
    
    Property description:
    
    The target node of this ScaleTransition.
    It is not possible to change the target node of a running ScaleTransition. If the value of node is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
  - getNode
```
public final Node getNode()
```
    Gets the value of the property node.
    
    Property description:
    
    The target node of this ScaleTransition.
    It is not possible to change the target node of a running ScaleTransition. If the value of node is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
  - nodeProperty
```
public final ObjectProperty<Node> nodeProperty()
```
    The target node of this ScaleTransition.
    It is not possible to change the target node of a running ScaleTransition. If the value of node is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    See Also:
    
    getNode(), setNode(Node)
  - setDuration
```
public final void setDuration(Duration value)
```
    Sets the value of the property duration.
    
    Property description:
    
    The duration of this ScaleTransition.
    It is not possible to change the duration of a running ScaleTransition. If the value of duration is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.
    
    Default value:
    
    400ms
  - getDuration
```
public final Duration getDuration()
```
    Gets the value of the property duration.
    
    Property description:
    
    The duration of this ScaleTransition.
    It is not possible to change the duration of a running ScaleTransition. If the value of duration is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.
    
    Default value:
    
    400ms
  - durationProperty
```
public final ObjectProperty<Duration> durationProperty()
```
    The duration of this ScaleTransition.
    It is not possible to change the duration of a running ScaleTransition. If the value of duration is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.
    
    Default value:
    
    400ms
    
    See Also:
    
    getDuration(), setDuration(Duration)
  - setFromX
```
public final void setFromX(double value)
```
    Sets the value of the property fromX.
    
    Property description:
    
    Specifies the start X scale value of this ScaleTransition.
    It is not possible to change fromX of a running ScaleTransition. If the value of fromX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - getFromX
```
public final double getFromX()
```
    Gets the value of the property fromX.
    
    Property description:
    
    Specifies the start X scale value of this ScaleTransition.
    It is not possible to change fromX of a running ScaleTransition. If the value of fromX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - fromXProperty
```
public final DoubleProperty fromXProperty()
```
    Specifies the start X scale value of this ScaleTransition.
    It is not possible to change fromX of a running ScaleTransition. If the value of fromX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getFromX(), setFromX(double)
  - setFromY
```
public final void setFromY(double value)
```
    Sets the value of the property fromY.
    
    Property description:
    
    Specifies the start Y scale value of this ScaleTransition.
    It is not possible to change fromY of a running ScaleTransition. If the value of fromY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - getFromY
```
public final double getFromY()
```
    Gets the value of the property fromY.
    
    Property description:
    
    Specifies the start Y scale value of this ScaleTransition.
    It is not possible to change fromY of a running ScaleTransition. If the value of fromY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - fromYProperty
```
public final DoubleProperty fromYProperty()
```
    Specifies the start Y scale value of this ScaleTransition.
    It is not possible to change fromY of a running ScaleTransition. If the value of fromY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getFromY(), setFromY(double)
  - setFromZ
```
public final void setFromZ(double value)
```
    Sets the value of the property fromZ.
    
    Property description:
    
    Specifies the start Z scale value of this ScaleTransition.
    It is not possible to change fromZ of a running ScaleTransition. If the value of fromZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - getFromZ
```
public final double getFromZ()
```
    Gets the value of the property fromZ.
    
    Property description:
    
    Specifies the start Z scale value of this ScaleTransition.
    It is not possible to change fromZ of a running ScaleTransition. If the value of fromZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - fromZProperty
```
public final DoubleProperty fromZProperty()
```
    Specifies the start Z scale value of this ScaleTransition.
    It is not possible to change fromZ of a running ScaleTransition. If the value of fromZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getFromZ(), setFromZ(double)
  - setToX
```
public final void setToX(double value)
```
    Sets the value of the property toX.
    
    Property description:
    
    Specifies the stop X scale value of this ScaleTransition.
    It is not possible to change toX of a running ScaleTransition. If the value of toX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - getToX
```
public final double getToX()
```
    Gets the value of the property toX.
    
    Property description:
    
    Specifies the stop X scale value of this ScaleTransition.
    It is not possible to change toX of a running ScaleTransition. If the value of toX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - toXProperty
```
public final DoubleProperty toXProperty()
```
    Specifies the stop X scale value of this ScaleTransition.
    It is not possible to change toX of a running ScaleTransition. If the value of toX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getToX(), setToX(double)
  - setToY
```
public final void setToY(double value)
```
    Sets the value of the property toY.
    
    Property description:
    
    The stop Y scale value of this ScaleTransition.
    It is not possible to change toY of a running ScaleTransition. If the value of toY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - getToY
```
public final double getToY()
```
    Gets the value of the property toY.
    
    Property description:
    
    The stop Y scale value of this ScaleTransition.
    It is not possible to change toY of a running ScaleTransition. If the value of toY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - toYProperty
```
public final DoubleProperty toYProperty()
```
    The stop Y scale value of this ScaleTransition.
    It is not possible to change toY of a running ScaleTransition. If the value of toY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getToY(), setToY(double)
  - setToZ
```
public final void setToZ(double value)
```
    Sets the value of the property toZ.
    
    Property description:
    
    The stop Z scale value of this ScaleTransition.
    It is not possible to change toZ of a running ScaleTransition. If the value of toZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - getToZ
```
public final double getToZ()
```
    Gets the value of the property toZ.
    
    Property description:
    
    The stop Z scale value of this ScaleTransition.
    It is not possible to change toZ of a running ScaleTransition. If the value of toZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
  - toZProperty
```
public final DoubleProperty toZProperty()
```
    The stop Z scale value of this ScaleTransition.
    It is not possible to change toZ of a running ScaleTransition. If the value of toZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    Default value:
    
    Double.NaN
    
    See Also:
    
    getToZ(), setToZ(double)
  - setByX
```
public final void setByX(double value)
```
    Sets the value of the property byX.
    
    Property description:
    
    Specifies the incremented stop X scale value, from the start, of this ScaleTransition.
    It is not possible to change byX of a running ScaleTransition. If the value of byX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
  - getByX
```
public final double getByX()
```
    Gets the value of the property byX.
    
    Property description:
    
    Specifies the incremented stop X scale value, from the start, of this ScaleTransition.
    It is not possible to change byX of a running ScaleTransition. If the value of byX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
  - byXProperty
```
public final DoubleProperty byXProperty()
```
    Specifies the incremented stop X scale value, from the start, of this ScaleTransition.
    It is not possible to change byX of a running ScaleTransition. If the value of byX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    See Also:
    
    getByX(), setByX(double)
  - setByY
```
public final void setByY(double value)
```
    Sets the value of the property byY.
    
    Property description:
    
    Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.
    It is not possible to change byY of a running ScaleTransition. If the value of byY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
  - getByY
```
public final double getByY()
```
    Gets the value of the property byY.
    
    Property description:
    
    Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.
    It is not possible to change byY of a running ScaleTransition. If the value of byY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
  - byYProperty
```
public final DoubleProperty byYProperty()
```
    Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.
    It is not possible to change byY of a running ScaleTransition. If the value of byY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    See Also:
    
    getByY(), setByY(double)
  - setByZ
```
public final void setByZ(double value)
```
    Sets the value of the property byZ.
    
    Property description:
    
    Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.
    It is not possible to change byZ of a running ScaleTransition. If the value of byZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
  - getByZ
```
public final double getByZ()
```
    Gets the value of the property byZ.
    
    Property description:
    
    Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.
    It is not possible to change byZ of a running ScaleTransition. If the value of byZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
  - byZProperty
```
public final DoubleProperty byZProperty()
```
    Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.
    It is not possible to change byZ of a running ScaleTransition. If the value of byZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.
    
    See Also:
    
    getByZ(), setByZ(double)
  - interpolate
```
public void interpolate(double frac)
```
    The method interpolate() has to be provided by implementations of Transition. While a Transition is running, this method is called in every frame. The parameter defines the current position with the animation. At the start, the fraction will be 0.0 and at the end it will be 1.0. How the parameter increases, depends on the interpolator, e.g. if the interpolator is Interpolator.LINEAR, the fraction will increase linear. This method must not be called by the user directly.
    
    Specified by:
    
    interpolate in class Transition
    
    Parameters:
    
    frac - The relative position

Class ScaleTransition

Property Summary

Properties inherited from class javafx.animation.Animation

Properties inherited from class javafx.animation.Transition

Nested Class Summary

Nested classes/interfaces inherited from class javafx.animation.Animation

Field Summary

Fields inherited from class javafx.animation.Animation

Constructor Summary

Method Summary

Methods inherited from class javafx.animation.Animation

Methods inherited from class java.lang.Object

Methods inherited from class javafx.animation.Transition

Property Detail

node

duration

fromX

fromY

fromZ

toX

toY

toZ

byX

byY

byZ

Constructor Detail

ScaleTransition

ScaleTransition

ScaleTransition

Method Detail

setNode

getNode

nodeProperty

setDuration

getDuration

durationProperty

setFromX

getFromX

fromXProperty

setFromY

getFromY

fromYProperty

setFromZ

getFromZ

fromZProperty

setToX

getToX

toXProperty

setToY

getToY

toYProperty

setToZ

getToZ

toZProperty

setByX

getByX

byXProperty

setByY

getByY

byYProperty

setByZ

getByZ

byZProperty

interpolate