Module java.jnlp
Package javax.jnlp

Interface JNLPRandomAccessFile

  • All Superinterfaces:
    DataInput, DataOutput

    public interface JNLPRandomAccessFile
extends DataInput, DataOutput
    Instances of this class support both reading and writing to a random access file. A random access file behaves like a large array of bytes stored in the file system. There is a kind of cursor, or index into the implied array, called the file pointer; input operations read bytes starting at the file pointer and advance the file pointer past the bytes read. If the random access file is created in read/write mode, then output operations are also available; output operations write bytes starting at the file pointer and advance the file pointer past the bytes written. Output operations that write past the current end of the implied array cause the array to be extended. The file pointer can be read by the getFilePointer method and set by the seek method.

    It is generally true of all the reading routines in this class that if end-of-file is reached before the desired number of bytes has been read, an EOFException (which is a kind of IOException) is thrown. If any byte cannot be read for any reason other than end-of-file, an IOException other than EOFException is thrown. In particular, an IOException may be thrown if the stream has been closed.

    Implementations are encouraged to enforce a maximum amount of data that may be written to a file.

    Since:
    1.4.2

    • Method Summary

      All Methods Instance Methods Abstract Methods 
      Modifier and Type Method Description
      void close​()
      Closes this random access file stream and releases any system resources associated with the stream.
      long getFilePointer​()
      Returns the current offset in this file.
      long length​()
      Returns the length of this file.
      int read​()
      Reads a byte of data from this file.
      int read​(byte[] b)
      Reads up to b.length bytes of data from this file into an array of bytes.
      int read​(byte[] b, int off, int len)
      Reads up to len bytes of data from this file into an array of bytes.
      boolean readBoolean​()
      Reads a boolean from this file.
      byte readByte​()
      Reads a signed eight-bit value from this file.
      char readChar​()
      Reads a Unicode character from this file.
      double readDouble​()
      Reads a double from this file.
      float readFloat​()
      Reads a float from this file.
      void readFully​(byte[] b)
      Reads b.length bytes from this file into the byte array, starting at the current file pointer.
      void readFully​(byte[] b, int off, int len)
      Reads exactly len bytes from this file into the byte array, starting at the current file pointer.
      int readInt​()
      Reads a signed 32-bit integer from this file.
      String readLine​()
      Reads the next line of text from this file.
      long readLong​()
      Reads a signed 64-bit integer from this file.
      short readShort​()
      Reads a signed 16-bit number from this file.
      int readUnsignedByte​()
      Reads an unsigned eight-bit number from this file.
      int readUnsignedShort​()
      Reads an unsigned 16-bit number from this file.
      String readUTF​()
      Reads in a string from this file.
      void seek​(long pos)
      Sets the file-pointer offset, measured from the beginning of this file, at which the next read or write occurs.
      void setLength​(long newLength)
      Sets the length of this file.
      int skipBytes​(int n)
      Attempts to skip over n bytes of input discarding the skipped bytes.
      void write​(byte[] b)
      Writes b.length bytes from the specified byte array to this file, starting at the current file pointer.
      void write​(byte[] b, int off, int len)
      Writes len bytes from the specified byte array starting at offset off to this file.
      void write​(int b)
      Writes the specified byte to this file.
      void writeBoolean​(boolean v)
      Writes a boolean to the file as a one-byte value.
      void writeByte​(int v)
      Writes a byte to the file as a one-byte value.
      void writeBytes​(String s)
      Writes the string to the file as a sequence of bytes.
      void writeChar​(int v)
      Writes a char to the file as a two-byte value, high byte first.
      void writeChars​(String s)
      Writes a string to the file as a sequence of characters.
      void writeDouble​(double v)
      Converts the double argument to a long using the doubleToLongBits method in class Double, and then writes that long value to the file as an eight-byte quantity, high byte first.
      void writeFloat​(float v)
      Converts the float argument to an int using the floatToIntBits method in class Float, and then writes that int value to the file as a four-byte quantity, high byte first.
      void writeInt​(int v)
      Writes an int to the file as four bytes, high byte first.
      void writeLong​(long v)
      Writes a long to the file as eight bytes, high byte first.
      void writeShort​(int v)
      Writes a short to the file as two bytes, high byte first.
      void writeUTF​(String str)
      Writes a string to the file using UTF-8 encoding in a machine-independent manner.

    • Method Detail

      • close

        void close​()
    throws IOException
        Closes this random access file stream and releases any system resources associated with the stream. A closed random access file cannot perform input or output operations and cannot be reopened.
        Throws:
        IOException - if an I/O error occurs.

      • length

        long length​()
     throws IOException
        Returns the length of this file.
        Returns:
        the length of this file, measured in bytes.
        Throws:
        IOException - if an I/O error occurs.

      • getFilePointer

        long getFilePointer​()
             throws IOException
        Returns the current offset in this file.
        Returns:
        the offset from the beginning of the file, in bytes, at which the next read or write occurs.
        Throws:
        IOException - if an I/O error occurs.

      • read

        int read​()
  throws IOException
        Reads a byte of data from this file. The byte is returned as an integer in the range 0 to 255 (0x00-0x0ff). This method blocks if no input is yet available.

        Although JNLPRandomAccessFile is not a subclass of InputStream, this method behaves in exactly the same way as the read method of InputStream.

        Returns:
        the next byte of data, or -1 if the end of the file has been reached.
        Throws:
        IOException - if an I/O error occurs. Not thrown if end-of-file has been reached.

      • read

        int read​(byte[] b,
         int off,
         int len)
  throws IOException
        Reads up to len bytes of data from this file into an array of bytes. This method blocks until at least one byte of input is available.

        Although JNLPRandomAccessFile is not a subclass of InputStream, this method behaves in the exactly the same way as the read(byte[], int, int) method of InputStream.

        Parameters:
        b - the buffer into which the data is read.
        off - the start offset of the data.
        len - the maximum number of bytes read.
        Returns:
        the total number of bytes read into the buffer, or -1 if there is no more data because the end of the file has been reached.
        Throws:
        IOException - if an I/O error occurs.

      • read

        int read​(byte[] b)
  throws IOException
        Reads up to b.length bytes of data from this file into an array of bytes. This method blocks until at least one byte of input is available.

        Although JNLPRandomAccessFile is not a subclass of InputStream, this method behaves in the exactly the same way as the read(byte[]) method of InputStream.

        Parameters:
        b - the buffer into which the data is read.
        Returns:
        the total number of bytes read into the buffer, or -1 if there is no more data because the end of this file has been reached.
        Throws:
        IOException - if an I/O error occurs.

      • readFully

        void readFully​(byte[] b)
        throws IOException
        Reads b.length bytes from this file into the byte array, starting at the current file pointer. This method reads repeatedly from the file until the requested number of bytes are read. This method blocks until the requested number of bytes are read, the end of the stream is detected, or an exception is thrown.
        Specified by:
        readFully in interface DataInput
        Parameters:
        b - the buffer into which the data is read.
        Throws:
        EOFException - if this file reaches the end before reading all the bytes.
        IOException - if an I/O error occurs.

      • readFully

        void readFully​(byte[] b,
               int off,
               int len)
        throws IOException
        Reads exactly len bytes from this file into the byte array, starting at the current file pointer. This method reads repeatedly from the file until the requested number of bytes are read. This method blocks until the requested number of bytes are read, the end of the stream is detected, or an exception is thrown.
        Specified by:
        readFully in interface DataInput
        Parameters:
        b - the buffer into which the data is read.
        off - the start offset of the data.
        len - the number of bytes to read.
        Throws:
        EOFException - if this file reaches the end before reading all the bytes.
        IOException - if an I/O error occurs.

      • skipBytes

        int skipBytes​(int n)
       throws IOException
        Attempts to skip over n bytes of input discarding the skipped bytes.

        This method may skip over some smaller number of bytes, possibly zero. This may result from any of a number of conditions; reaching end of file before n bytes have been skipped is only one possibility. This method never throws an EOFException. The actual number of bytes skipped is returned. If n is negative, no bytes are skipped.

        Specified by:
        skipBytes in interface DataInput
        Parameters:
        n - the number of bytes to be skipped.
        Returns:
        the actual number of bytes skipped.
        Throws:
        IOException - if an I/O error occurs.

      • readBoolean

        boolean readBoolean​()
             throws IOException
        Reads a boolean from this file. This method reads a single byte from the file, starting at the current file pointer. A value of 0 represents false. Any other value represents true. This method blocks until the byte is read, the end of the stream is detected, or an exception is thrown.
        Specified by:
        readBoolean in interface DataInput
        Returns:
        the boolean value read.
        Throws:
        EOFException - if this file has reached the end.
        IOException - if an I/O error occurs.

      • readByte

        byte readByte​()
       throws IOException
        Reads a signed eight-bit value from this file. This method reads a byte from the file, starting from the current file pointer. If the byte read is b, where 0 <= b <= 255, then the result is: 
             (byte)(b)

        This method blocks until the byte is read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readByte in interface DataInput
        Returns:
        the next byte of this file as a signed eight-bit byte.
        Throws:
        EOFException - if this file has reached the end.
        IOException - if an I/O error occurs.

      • readUnsignedByte

        int readUnsignedByte​()
              throws IOException
        Reads an unsigned eight-bit number from this file. This method reads a byte from this file, starting at the current file pointer, and returns that byte.

        This method blocks until the byte is read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readUnsignedByte in interface DataInput
        Returns:
        the next byte of this file, interpreted as an unsigned eight-bit number.
        Throws:
        EOFException - if this file has reached the end.
        IOException - if an I/O error occurs.

      • readShort

        short readShort​()
         throws IOException
        Reads a signed 16-bit number from this file. The method reads two bytes from this file, starting at the current file pointer. If the two bytes read, in order, are b1 and b2, where each of the two values is between 0 and 255, inclusive, then the result is equal to: 
             (short)((b1 << 8) | b2)

        This method blocks until the two bytes are read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readShort in interface DataInput
        Returns:
        the next two bytes of this file, interpreted as a signed 16-bit number.
        Throws:
        EOFException - if this file reaches the end before reading two bytes.
        IOException - if an I/O error occurs.

      • readUnsignedShort

        int readUnsignedShort​()
               throws IOException
        Reads an unsigned 16-bit number from this file. This method reads two bytes from the file, starting at the current file pointer. If the bytes read, in order, are b1 and b2, where 0 <= b1, b2 <= 255, then the result is equal to: 
             (b1 << 8) | b2

        This method blocks until the two bytes are read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readUnsignedShort in interface DataInput
        Returns:
        the next two bytes of this file, interpreted as an unsigned 16-bit integer.
        Throws:
        EOFException - if this file reaches the end before reading two bytes.
        IOException - if an I/O error occurs.

      • readChar

        char readChar​()
       throws IOException
        Reads a Unicode character from this file. This method reads two bytes from the file, starting at the current file pointer. If the bytes read, in order, are b1 and b2, where 0 <= b1, b2 <= 255, then the result is equal to: 
             (char)((b1 << 8) | b2)

        This method blocks until the two bytes are read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readChar in interface DataInput
        Returns:
        the next two bytes of this file as a Unicode character.
        Throws:
        EOFException - if this file reaches the end before reading two bytes.
        IOException - if an I/O error occurs.

      • readInt

        int readInt​()
     throws IOException
        Reads a signed 32-bit integer from this file. This method reads 4 bytes from the file, starting at the current file pointer. If the bytes read, in order, are b1, b2, b3, and b4, where 0 <= b1, b2, b3, b4 <= 255, then the result is equal to: 
             (b1 << 24) | (b2 << 16) + (b3 << 8) + b4

        This method blocks until the four bytes are read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readInt in interface DataInput
        Returns:
        the next four bytes of this file, interpreted as an int.
        Throws:
        EOFException - if this file reaches the end before reading four bytes.
        IOException - if an I/O error occurs.

      • readLong

        long readLong​()
       throws IOException
        Reads a signed 64-bit integer from this file. This method reads eight bytes from the file, starting at the current file pointer. If the bytes read, in order, are b1, b2, b3, b4, b5, b6, b7, and b8, where: 
             0 <= b1, b2, b3, b4, b5, b6, b7, b8 <=255,

        then the result is equal to: 

             ((long)b1 << 56) + ((long)b2 << 48)
     + ((long)b3 << 40) + ((long)b4 << 32)
     + ((long)b5 << 24) + ((long)b6 << 16)
     + ((long)b7 << 8) + b8

        This method blocks until the eight bytes are read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readLong in interface DataInput
        Returns:
        the next eight bytes of this file, interpreted as a long.
        Throws:
        EOFException - if this file reaches the end before reading eight bytes.
        IOException - if an I/O error occurs.

      • readFloat

        float readFloat​()
         throws IOException
        Reads a float from this file. This method reads an int value, starting at the current file pointer, as if by the readInt method and then converts that int to a float using the intBitsToFloat method in class Float.

        This method blocks until the four bytes are read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readFloat in interface DataInput
        Returns:
        the next four bytes of this file, interpreted as a float.
        Throws:
        EOFException - if this file reaches the end before reading four bytes.
        IOException - if an I/O error occurs.
        See Also:
        readInt()

      • readDouble

        double readDouble​()
           throws IOException
        Reads a double from this file. This method reads a long value, starting at the current file pointer, as if by the readLong method and then converts that long to a double using the longBitsToDouble method in class Double.

        This method blocks until the eight bytes are read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readDouble in interface DataInput
        Returns:
        the next eight bytes of this file, interpreted as a double.
        Throws:
        EOFException - if this file reaches the end before reading eight bytes.
        IOException - if an I/O error occurs.
        See Also:
        readLong()

      • readLine

        String readLine​()
         throws IOException
        Reads the next line of text from this file. This method successively reads bytes from the file, starting at the current file pointer, until it reaches a line terminator or the end of the file. Each byte is converted into a character by taking the byte's value for the lower eight bits of the character and setting the high eight bits of the character to zero. This method does not, therefore, support the full Unicode character set.

        A line of text is terminated by a carriage-return character ('\r'), a newline character ('\n'), a carriage-return character immediately followed by a newline character, or the end of the file. Line-terminating characters are discarded and are not included as part of the string returned.

        This method blocks until a newline character is read, a carriage return and the byte following it are read (to see if it is a newline), the end of the file is reached, or an exception is thrown.

        Specified by:
        readLine in interface DataInput
        Returns:
        the next line of text from this file, or null if end of file is encountered before even one byte is read.
        Throws:
        IOException - if an I/O error occurs.

      • readUTF

        String readUTF​()
        throws IOException
        Reads in a string from this file. The string has been encoded using a modified UTF-8 format.

        The first two bytes are read, starting from the current file pointer, as if by readUnsignedShort. This value gives the number of following bytes that are in the encoded string, not the length of the resulting string. The following bytes are then interpreted as bytes encoding characters in the UTF-8 format and are converted into characters.

        This method blocks until all the bytes are read, the end of the stream is detected, or an exception is thrown.

        Specified by:
        readUTF in interface DataInput
        Returns:
        a Unicode string.
        Throws:
        EOFException - if this file reaches the end before reading all the bytes.
        IOException - if an I/O error occurs.
        UTFDataFormatException - if the bytes do not represent valid UTF-8 encoding of a Unicode string.
        See Also:
        readUnsignedShort()

      • seek

        void seek​(long pos)
   throws IOException
        Sets the file-pointer offset, measured from the beginning of this file, at which the next read or write occurs. The offset may be set beyond the end of the file. Setting the offset beyond the end of the file does not change the file length. The file length will change only by writing after the offset has been set beyond the end of the file.
        Parameters:
        pos - the offset position, measured in bytes from the beginning of the file, at which to set the file pointer.
        Throws:
        IOException - if pos is less than 0 or if an I/O error occurs.

      • setLength

        void setLength​(long newLength)
        throws IOException
        Sets the length of this file.

        If the present length of the file as returned by the length method is greater than the newLength argument then the file will be truncated. In this case, if the file offset as returned by the getFilePointer method is greater then newLength then after this method returns the offset will be equal to newLength.

        If the present length of the file as returned by the length method is smaller than the newLength argument then the file will be extended. In this case, the contents of the extended portion of the file are not defined.

        Parameters:
        newLength - The desired length of the file
        Throws:
        IOException - If an I/O error occurs

      • write

        void write​(int b)
    throws IOException
        Writes the specified byte to this file. The write starts at the current file pointer.
        Specified by:
        write in interface DataOutput
        Parameters:
        b - the byte to be written.
        Throws:
        IOException - if an I/O error occurs.

      • write

        void write​(byte[] b)
    throws IOException
        Writes b.length bytes from the specified byte array to this file, starting at the current file pointer.
        Specified by:
        write in interface DataOutput
        Parameters:
        b - the data.
        Throws:
        IOException - if an I/O error occurs.

      • write

        void write​(byte[] b,
           int off,
           int len)
    throws IOException
        Writes len bytes from the specified byte array starting at offset off to this file.
        Specified by:
        write in interface DataOutput
        Parameters:
        b - the data.
        off - the start offset in the data.
        len - the number of bytes to write.
        Throws:
        IOException - if an I/O error occurs.

      • writeBoolean

        void writeBoolean​(boolean v)
           throws IOException
        Writes a boolean to the file as a one-byte value. The value true is written out as the value (byte)1; the value false is written out as the value (byte)0. The write starts at the current position of the file pointer.
        Specified by:
        writeBoolean in interface DataOutput
        Parameters:
        v - a boolean value to be written.
        Throws:
        IOException - if an I/O error occurs.

      • writeByte

        void writeByte​(int v)
        throws IOException
        Writes a byte to the file as a one-byte value. The write starts at the current position of the file pointer.
        Specified by:
        writeByte in interface DataOutput
        Parameters:
        v - a byte value to be written.
        Throws:
        IOException - if an I/O error occurs.

      • writeShort

        void writeShort​(int v)
         throws IOException
        Writes a short to the file as two bytes, high byte first. The write starts at the current position of the file pointer.
        Specified by:
        writeShort in interface DataOutput
        Parameters:
        v - a short to be written.
        Throws:
        IOException - if an I/O error occurs.

      • writeChar

        void writeChar​(int v)
        throws IOException
        Writes a char to the file as a two-byte value, high byte first. The write starts at the current position of the file pointer.
        Specified by:
        writeChar in interface DataOutput
        Parameters:
        v - a char value to be written.
        Throws:
        IOException - if an I/O error occurs.

      • writeInt

        void writeInt​(int v)
       throws IOException
        Writes an int to the file as four bytes, high byte first. The write starts at the current position of the file pointer.
        Specified by:
        writeInt in interface DataOutput
        Parameters:
        v - an int to be written.
        Throws:
        IOException - if an I/O error occurs.

      • writeLong

        void writeLong​(long v)
        throws IOException
        Writes a long to the file as eight bytes, high byte first. The write starts at the current position of the file pointer.
        Specified by:
        writeLong in interface DataOutput
        Parameters:
        v - a long to be written.
        Throws:
        IOException - if an I/O error occurs.

      • writeFloat

        void writeFloat​(float v)
         throws IOException
        Converts the float argument to an int using the floatToIntBits method in class Float, and then writes that int value to the file as a four-byte quantity, high byte first. The write starts at the current position of the file pointer.
        Specified by:
        writeFloat in interface DataOutput
        Parameters:
        v - a float value to be written.
        Throws:
        IOException - if an I/O error occurs.

      • writeDouble

        void writeDouble​(double v)
          throws IOException
        Converts the double argument to a long using the doubleToLongBits method in class Double, and then writes that long value to the file as an eight-byte quantity, high byte first. The write starts at the current position of the file pointer.
        Specified by:
        writeDouble in interface DataOutput
        Parameters:
        v - a double value to be written.
        Throws:
        IOException - if an I/O error occurs.

      • writeBytes

        void writeBytes​(String s)
         throws IOException
        Writes the string to the file as a sequence of bytes. Each character in the string is written out, in sequence, by discarding its high eight bits. The write starts at the current position of the file pointer.
        Specified by:
        writeBytes in interface DataOutput
        Parameters:
        s - a string of bytes to be written.
        Throws:
        IOException - if an I/O error occurs.

      • writeChars

        void writeChars​(String s)
         throws IOException
        Writes a string to the file as a sequence of characters. Each character is written to the data output stream as if by the writeChar method. The write starts at the current position of the file pointer.
        Specified by:
        writeChars in interface DataOutput
        Parameters:
        s - a String value to be written.
        Throws:
        IOException - if an I/O error occurs.
        See Also:
        writeChar(int)

      • writeUTF

        void writeUTF​(String str)
       throws IOException
        Writes a string to the file using UTF-8 encoding in a machine-independent manner.

        First, two bytes are written to the file, starting at the current file pointer, as if by the writeShort method giving the number of bytes to follow. This value is the number of bytes actually written out, not the length of the string. Following the length, each character of the string is output, in sequence, using the UTF-8 encoding for each character.

        Specified by:
        writeUTF in interface DataOutput
        Parameters:
        str - a string to be written.
        Throws:
        IOException - if an I/O error occurs.