-
- All Superinterfaces:
Context
- All Known Subinterfaces:
EventDirContext
public interface EventContext extends Context
Contains methods for registering/deregistering listeners to be notified of events fired when objects named in a context changes.Target
The name parameter in theaddNamingListener()
methods is referred to as the target. The target, along with the scope, identify the object(s) that the listener is interested in. It is possible to register interest in a target that does not exist, but there might be limitations in the extent to which this can be supported by the service provider and underlying protocol/service.If a service only supports registration for existing targets, an attempt to register for a nonexistent target results in a
NameNotFoundException
being thrown as early as possible, preferably at the timeaddNamingListener()
is called, or if that is not possible, the listener will receive the exception through theNamingExceptionEvent
.Also, for service providers that only support registration for existing targets, when the target that a listener has registered for is subsequently removed from the namespace, the listener is notified via a
NamingExceptionEvent
(containing aNameNotFoundException
).An application can use the method
targetMustExist()
to check whether anEventContext
supports registration of nonexistent targets.Event Source
TheEventContext
instance on which you invoke the registration methods is the event source of the events that are (potentially) generated. The source is not necessarily the object named by the target. Only when the target is the empty name is the object named by the target the source. In other words, the target, along with the scope parameter, are used to identify the object(s) that the listener is interested in, but the event source is theEventContext
instance with which the listener has registered.For example, suppose a listener makes the following registration:
When an object named "x/y" is subsequently deleted, the correspondingNamespaceChangeListener listener = ...; src.addNamingListener("x", SUBTREE_SCOPE, listener);
NamingEvent
(evt
) must contain:evt.getEventContext() == src evt.getOldBinding().getName().equals("x/y")
Furthermore, listener registration/deregistration is with the
EventContext
instance, and not with the corresponding object in the namespace. If the program intends at some point to remove a listener, then it needs to keep a reference to theEventContext
instance on which it invokedaddNamingListener()
(just as it needs to keep a reference to the listener in order to remove it later). It cannot expect to do alookup()
and get another instance of anEventContext
on which to perform the deregistration.Lifetime of Registration
A registered listener becomes deregistered when:- It is removed using
removeNamingListener()
. - An exception is thrown while collecting information about the events.
That is, when the listener receives a
NamingExceptionEvent
. Context.close()
is invoked on theEventContext
instance with which it has registered.
EventContext
instance that has outstanding listeners will continue to exist and be maintained by the service provider.Listener Implementations
The registration/deregistration methods accept an instance ofNamingListener
. There are subinterfaces ofNamingListener
for different of event types ofNamingEvent
. For example, theObjectChangeListener
interface is for theNamingEvent.OBJECT_CHANGED
event type. To register interest in multiple event types, the listener implementation should implement multipleNamingListener
subinterfaces and use a single invocation ofaddNamingListener()
. In addition to reducing the number of method calls and possibly the code size of the listeners, this allows some service providers to optimize the registration.Threading Issues
LikeContext
instances in general, instances ofEventContext
are not guaranteed to be thread-safe. Care must be taken when multiple threads are accessing the sameEventContext
concurrently. See the package description for more information on threading issues.- Since:
- 1.3
-
-
Field Summary
Fields Modifier and Type Field Description static int
OBJECT_SCOPE
Constant for expressing interest in events concerning the object named by the target.static int
ONELEVEL_SCOPE
Constant for expressing interest in events concerning objects in the context named by the target, excluding the context named by the target.static int
SUBTREE_SCOPE
Constant for expressing interest in events concerning objects in the subtree of the object named by the target, including the object named by the target.-
Fields inherited from interface javax.naming.Context
APPLET, AUTHORITATIVE, BATCHSIZE, DNS_URL, INITIAL_CONTEXT_FACTORY, LANGUAGE, OBJECT_FACTORIES, PROVIDER_URL, REFERRAL, SECURITY_AUTHENTICATION, SECURITY_CREDENTIALS, SECURITY_PRINCIPAL, SECURITY_PROTOCOL, STATE_FACTORIES, URL_PKG_PREFIXES
-
-
Method Summary
All Methods Instance Methods Abstract Methods Modifier and Type Method Description void
addNamingListener(String target, int scope, NamingListener l)
Adds a listener for receiving naming events fired when the object named by the string target name and scope changes.void
addNamingListener(Name target, int scope, NamingListener l)
Adds a listener for receiving naming events fired when the object(s) identified by a target and scope changes.void
removeNamingListener(NamingListener l)
Removes a listener from receiving naming events fired by thisEventContext
.boolean
targetMustExist()
Determines whether a listener can register interest in a target that does not exist.-
Methods inherited from interface javax.naming.Context
addToEnvironment, bind, bind, close, composeName, composeName, createSubcontext, createSubcontext, destroySubcontext, destroySubcontext, getEnvironment, getNameInNamespace, getNameParser, getNameParser, list, list, listBindings, listBindings, lookup, lookup, lookupLink, lookupLink, rebind, rebind, removeFromEnvironment, rename, rename, unbind, unbind
-
-
-
-
Field Detail
-
OBJECT_SCOPE
static final int OBJECT_SCOPE
Constant for expressing interest in events concerning the object named by the target.The value of this constant is
0
.- See Also:
- Constant Field Values
-
ONELEVEL_SCOPE
static final int ONELEVEL_SCOPE
Constant for expressing interest in events concerning objects in the context named by the target, excluding the context named by the target.The value of this constant is
1
.- See Also:
- Constant Field Values
-
SUBTREE_SCOPE
static final int SUBTREE_SCOPE
Constant for expressing interest in events concerning objects in the subtree of the object named by the target, including the object named by the target.The value of this constant is
2
.- See Also:
- Constant Field Values
-
-
Method Detail
-
addNamingListener
void addNamingListener(Name target, int scope, NamingListener l) throws NamingException
Adds a listener for receiving naming events fired when the object(s) identified by a target and scope changes. The event source of those events is this context. See the class description for a discussion on event source and target. See the descriptions of the constantsOBJECT_SCOPE
,ONELEVEL_SCOPE
, andSUBTREE_SCOPE
to see howscope
affects the registration.target
needs to name a context only whenscope
isONELEVEL_SCOPE
.target
may name a non-context ifscope
is eitherOBJECT_SCOPE
orSUBTREE_SCOPE
. UsingSUBTREE_SCOPE
for a non-context might be useful, for example, if the caller does not know in advance whethertarget
is a context and just wants to register interest in the (possibly degenerate subtree) rooted attarget
.When the listener is notified of an event, the listener may in invoked in a thread other than the one in which
addNamingListener()
is executed. Care must be taken when multiple threads are accessing the sameEventContext
concurrently. See the package description for more information on threading issues.- Parameters:
target
- A nonnull name to be resolved relative to this context.scope
- One ofOBJECT_SCOPE
,ONELEVEL_SCOPE
, orSUBTREE_SCOPE
.l
- The nonnull listener.- Throws:
NamingException
- If a problem was encountered while adding the listener.- See Also:
removeNamingListener(javax.naming.event.NamingListener)
-
addNamingListener
void addNamingListener(String target, int scope, NamingListener l) throws NamingException
Adds a listener for receiving naming events fired when the object named by the string target name and scope changes. See the overload that accepts aName
for details.- Parameters:
target
- The nonnull string name of the object resolved relative to this context.scope
- One ofOBJECT_SCOPE
,ONELEVEL_SCOPE
, orSUBTREE_SCOPE
.l
- The nonnull listener.- Throws:
NamingException
- If a problem was encountered while adding the listener.- See Also:
removeNamingListener(javax.naming.event.NamingListener)
-
removeNamingListener
void removeNamingListener(NamingListener l) throws NamingException
Removes a listener from receiving naming events fired by thisEventContext
. The listener may have registered more than once with thisEventContext
, perhaps with different target/scope arguments. After this method is invoked, the listener will no longer receive events with thisEventContext
instance as the event source (except for those events already in the process of being dispatched). If the listener was not, or is no longer, registered with thisEventContext
instance, this method does not do anything.- Parameters:
l
- The nonnull listener.- Throws:
NamingException
- If a problem was encountered while removing the listener.- See Also:
addNamingListener(javax.naming.Name, int, javax.naming.event.NamingListener)
-
targetMustExist
boolean targetMustExist() throws NamingException
Determines whether a listener can register interest in a target that does not exist.- Returns:
- true if the target must exist; false if the target need not exist.
- Throws:
NamingException
- If the context's behavior in this regard cannot be determined.
-
-