OpenCV
4.1.0
Open Source Computer Vision

Enumerations  
enum  cv::MorphShapes { cv::MORPH_RECT = 0, cv::MORPH_CROSS = 1, cv::MORPH_ELLIPSE = 2 } 
shape of the structuring element More...  
enum  cv::MorphTypes { cv::MORPH_ERODE = 0, cv::MORPH_DILATE = 1, cv::MORPH_OPEN = 2, cv::MORPH_CLOSE = 3, cv::MORPH_GRADIENT = 4, cv::MORPH_TOPHAT = 5, cv::MORPH_BLACKHAT = 6, cv::MORPH_HITMISS = 7 } 
type of morphological operation More...  
enum  cv::SpecialFilter { cv::FILTER_SCHARR = 1 } 
Functions  
void  cv::bilateralFilter (InputArray src, OutputArray dst, int d, double sigmaColor, double sigmaSpace, int borderType=BORDER_DEFAULT) 
Applies the bilateral filter to an image.  
void  cv::blur (InputArray src, OutputArray dst, Size ksize, Point anchor=Point(1,1), int borderType=BORDER_DEFAULT) 
Blurs an image using the normalized box filter.  
void  cv::boxFilter (InputArray src, OutputArray dst, int ddepth, Size ksize, Point anchor=Point(1,1), bool normalize=true, int borderType=BORDER_DEFAULT) 
Blurs an image using the box filter.  
void  cv::buildPyramid (InputArray src, OutputArrayOfArrays dst, int maxlevel, int borderType=BORDER_DEFAULT) 
Constructs the Gaussian pyramid for an image.  
void  cv::dilate (InputArray src, OutputArray dst, InputArray kernel, Point anchor=Point(1,1), int iterations=1, int borderType=BORDER_CONSTANT, const Scalar &borderValue=morphologyDefaultBorderValue()) 
Dilates an image by using a specific structuring element.  
void  cv::erode (InputArray src, OutputArray dst, InputArray kernel, Point anchor=Point(1,1), int iterations=1, int borderType=BORDER_CONSTANT, const Scalar &borderValue=morphologyDefaultBorderValue()) 
Erodes an image by using a specific structuring element.  
void  cv::filter2D (InputArray src, OutputArray dst, int ddepth, InputArray kernel, Point anchor=Point(1,1), double delta=0, int borderType=BORDER_DEFAULT) 
Convolves an image with the kernel.  
void  cv::GaussianBlur (InputArray src, OutputArray dst, Size ksize, double sigmaX, double sigmaY=0, int borderType=BORDER_DEFAULT) 
Blurs an image using a Gaussian filter.  
void  cv::getDerivKernels (OutputArray kx, OutputArray ky, int dx, int dy, int ksize, bool normalize=false, int ktype=CV_32F) 
Returns filter coefficients for computing spatial image derivatives.  
Mat  cv::getGaborKernel (Size ksize, double sigma, double theta, double lambd, double gamma, double psi=CV_PI *0.5, int ktype=CV_64F) 
Returns Gabor filter coefficients.  
Mat  cv::getGaussianKernel (int ksize, double sigma, int ktype=CV_64F) 
Returns Gaussian filter coefficients.  
Mat  cv::getStructuringElement (int shape, Size ksize, Point anchor=Point(1,1)) 
Returns a structuring element of the specified size and shape for morphological operations.  
void  cv::Laplacian (InputArray src, OutputArray dst, int ddepth, int ksize=1, double scale=1, double delta=0, int borderType=BORDER_DEFAULT) 
Calculates the Laplacian of an image.  
void  cv::medianBlur (InputArray src, OutputArray dst, int ksize) 
Blurs an image using the median filter.  
static Scalar  cv::morphologyDefaultBorderValue () 
returns "magic" border value for erosion and dilation. It is automatically transformed to Scalar::all(DBL_MAX) for dilation.  
void  cv::morphologyEx (InputArray src, OutputArray dst, int op, InputArray kernel, Point anchor=Point(1,1), int iterations=1, int borderType=BORDER_CONSTANT, const Scalar &borderValue=morphologyDefaultBorderValue()) 
Performs advanced morphological transformations.  
void  cv::pyrDown (InputArray src, OutputArray dst, const Size &dstsize=Size(), int borderType=BORDER_DEFAULT) 
Blurs an image and downsamples it.  
void  cv::pyrMeanShiftFiltering (InputArray src, OutputArray dst, double sp, double sr, int maxLevel=1, TermCriteria termcrit=TermCriteria(TermCriteria::MAX_ITER+TermCriteria::EPS, 5, 1)) 
Performs initial step of meanshift segmentation of an image.  
void  cv::pyrUp (InputArray src, OutputArray dst, const Size &dstsize=Size(), int borderType=BORDER_DEFAULT) 
Upsamples an image and then blurs it.  
void  cv::Scharr (InputArray src, OutputArray dst, int ddepth, int dx, int dy, double scale=1, double delta=0, int borderType=BORDER_DEFAULT) 
Calculates the first x or y image derivative using Scharr operator.  
void  cv::sepFilter2D (InputArray src, OutputArray dst, int ddepth, InputArray kernelX, InputArray kernelY, Point anchor=Point(1,1), double delta=0, int borderType=BORDER_DEFAULT) 
Applies a separable linear filter to an image.  
void  cv::Sobel (InputArray src, OutputArray dst, int ddepth, int dx, int dy, int ksize=3, double scale=1, double delta=0, int borderType=BORDER_DEFAULT) 
Calculates the first, second, third, or mixed image derivatives using an extended Sobel operator.  
void  cv::spatialGradient (InputArray src, OutputArray dx, OutputArray dy, int ksize=3, int borderType=BORDER_DEFAULT) 
Calculates the first order image derivative in both x and y using a Sobel operator.  
void  cv::sqrBoxFilter (InputArray src, OutputArray dst, int ddepth, Size ksize, Point anchor=Point(1,1), bool normalize=true, int borderType=BORDER_DEFAULT) 
Calculates the normalized sum of squares of the pixel values overlapping the filter.  
Functions and classes described in this section are used to perform various linear or nonlinear filtering operations on 2D images (represented as Mat's). It means that for each pixel location \((x,y)\) in the source image (normally, rectangular), its neighborhood is considered and used to compute the response. In case of a linear filter, it is a weighted sum of pixel values. In case of morphological operations, it is the minimum or maximum values, and so on. The computed response is stored in the destination image at the same location \((x,y)\). It means that the output image will be of the same size as the input image. Normally, the functions support multichannel arrays, in which case every channel is processed independently. Therefore, the output image will also have the same number of channels as the input one.
Another common feature of the functions and classes described in this section is that, unlike simple arithmetic functions, they need to extrapolate values of some nonexisting pixels. For example, if you want to smooth an image using a Gaussian \(3 \times 3\) filter, then, when processing the leftmost pixels in each row, you need pixels to the left of them, that is, outside of the image. You can let these pixels be the same as the leftmost image pixels ("replicated border" extrapolation method), or assume that all the nonexisting pixels are zeros ("constant border" extrapolation method), and so on. OpenCV enables you to specify the extrapolation method. For details, see BorderTypes
Input depth (src.depth())  Output depth (ddepth) 

CV_8U  1/CV_16S/CV_32F/CV_64F 
CV_16U/CV_16S  1/CV_32F/CV_64F 
CV_32F  1/CV_32F/CV_64F 
CV_64F  1/CV_64F 
enum cv::MorphShapes 
shape of the structuring element
enum cv::MorphTypes 
type of morphological operation
Enumerator  

MORPH_ERODE 
see erode 
MORPH_DILATE 
see dilate 
MORPH_OPEN 
an opening operation \[\texttt{dst} = \mathrm{open} ( \texttt{src} , \texttt{element} )= \mathrm{dilate} ( \mathrm{erode} ( \texttt{src} , \texttt{element} ))\] 
MORPH_CLOSE 
a closing operation \[\texttt{dst} = \mathrm{close} ( \texttt{src} , \texttt{element} )= \mathrm{erode} ( \mathrm{dilate} ( \texttt{src} , \texttt{element} ))\] 
MORPH_GRADIENT 
a morphological gradient \[\texttt{dst} = \mathrm{morph\_grad} ( \texttt{src} , \texttt{element} )= \mathrm{dilate} ( \texttt{src} , \texttt{element} ) \mathrm{erode} ( \texttt{src} , \texttt{element} )\] 
MORPH_TOPHAT 
"top hat" \[\texttt{dst} = \mathrm{tophat} ( \texttt{src} , \texttt{element} )= \texttt{src}  \mathrm{open} ( \texttt{src} , \texttt{element} )\] 
MORPH_BLACKHAT 
"black hat" \[\texttt{dst} = \mathrm{blackhat} ( \texttt{src} , \texttt{element} )= \mathrm{close} ( \texttt{src} , \texttt{element} ) \texttt{src}\] 
MORPH_HITMISS 
"hit or miss" . Only supported for CV_8UC1 binary images. A tutorial can be found in the documentation 
enum cv::SpecialFilter 
void cv::bilateralFilter  (  InputArray  src, 
OutputArray  dst,  
int  d,  
double  sigmaColor,  
double  sigmaSpace,  
int  borderType = BORDER_DEFAULT 

) 
Applies the bilateral filter to an image.
The function applies bilateral filtering to the input image, as described in http://www.dai.ed.ac.uk/CVonline/LOCAL_COPIES/MANDUCHI1/Bilateral_Filtering.html bilateralFilter can reduce unwanted noise very well while keeping edges fairly sharp. However, it is very slow compared to most filters.
Sigma values: For simplicity, you can set the 2 sigma values to be the same. If they are small (< 10), the filter will not have much effect, whereas if they are large (> 150), they will have a very strong effect, making the image look "cartoonish".
Filter size: Large filters (d > 5) are very slow, so it is recommended to use d=5 for realtime applications, and perhaps d=9 for offline applications that need heavy noise filtering.
This filter does not work inplace.
src  Source 8bit or floatingpoint, 1channel or 3channel image. 
dst  Destination image of the same size and type as src . 
d  Diameter of each pixel neighborhood that is used during filtering. If it is nonpositive, it is computed from sigmaSpace. 
sigmaColor  Filter sigma in the color space. A larger value of the parameter means that farther colors within the pixel neighborhood (see sigmaSpace) will be mixed together, resulting in larger areas of semiequal color. 
sigmaSpace  Filter sigma in the coordinate space. A larger value of the parameter means that farther pixels will influence each other as long as their colors are close enough (see sigmaColor ). When d>0, it specifies the neighborhood size regardless of sigmaSpace. Otherwise, d is proportional to sigmaSpace. 
borderType  border mode used to extrapolate pixels outside of the image, see BorderTypes 
void cv::blur  (  InputArray  src, 
OutputArray  dst,  
Size  ksize,  
Point  anchor = Point(1,1) , 

int  borderType = BORDER_DEFAULT 

) 
Blurs an image using the normalized box filter.
The function smooths an image using the kernel:
\[\texttt{K} = \frac{1}{\texttt{ksize.width*ksize.height}} \begin{bmatrix} 1 & 1 & 1 & \cdots & 1 & 1 \\ 1 & 1 & 1 & \cdots & 1 & 1 \\ \hdotsfor{6} \\ 1 & 1 & 1 & \cdots & 1 & 1 \\ \end{bmatrix}\]
The call blur(src, dst, ksize, anchor, borderType)
is equivalent to boxFilter(src, dst, src.type(), anchor, true, borderType)
.
src  input image; it can have any number of channels, which are processed independently, but the depth should be CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. 
dst  output image of the same size and type as src. 
ksize  blurring kernel size. 
anchor  anchor point; default value Point(1,1) means that the anchor is at the kernel center. 
borderType  border mode used to extrapolate pixels outside of the image, see BorderTypes 
void cv::boxFilter  (  InputArray  src, 
OutputArray  dst,  
int  ddepth,  
Size  ksize,  
Point  anchor = Point(1,1) , 

bool  normalize = true , 

int  borderType = BORDER_DEFAULT 

) 
Blurs an image using the box filter.
The function smooths an image using the kernel:
\[\texttt{K} = \alpha \begin{bmatrix} 1 & 1 & 1 & \cdots & 1 & 1 \\ 1 & 1 & 1 & \cdots & 1 & 1 \\ \hdotsfor{6} \\ 1 & 1 & 1 & \cdots & 1 & 1 \end{bmatrix}\]
where
\[\alpha = \fork{\frac{1}{\texttt{ksize.width*ksize.height}}}{when \texttt{normalize=true}}{1}{otherwise}\]
Unnormalized box filter is useful for computing various integral characteristics over each pixel neighborhood, such as covariance matrices of image derivatives (used in dense optical flow algorithms, and so on). If you need to compute pixel sums over variablesize windows, use integral.
src  input image. 
dst  output image of the same size and type as src. 
ddepth  the output image depth (1 to use src.depth()). 
ksize  blurring kernel size. 
anchor  anchor point; default value Point(1,1) means that the anchor is at the kernel center. 
normalize  flag, specifying whether the kernel is normalized by its area or not. 
borderType  border mode used to extrapolate pixels outside of the image, see BorderTypes 
void cv::buildPyramid  (  InputArray  src, 
OutputArrayOfArrays  dst,  
int  maxlevel,  
int  borderType = BORDER_DEFAULT 

) 
Constructs the Gaussian pyramid for an image.
The function constructs a vector of images and builds the Gaussian pyramid by recursively applying pyrDown to the previously built pyramid layers, starting from dst[0]==src
.
src  Source image. Check pyrDown for the list of supported types. 
dst  Destination vector of maxlevel+1 images of the same type as src. dst[0] will be the same as src. dst[1] is the next pyramid layer, a smoothed and downsized src, and so on. 
maxlevel  0based index of the last (the smallest) pyramid layer. It must be nonnegative. 
borderType  Pixel extrapolation method, see BorderTypes (BORDER_CONSTANT isn't supported) 
void cv::dilate  (  InputArray  src, 
OutputArray  dst,  
InputArray  kernel,  
Point  anchor = Point(1,1) , 

int  iterations = 1 , 

int  borderType = BORDER_CONSTANT , 

const Scalar &  borderValue = morphologyDefaultBorderValue() 

) 
Dilates an image by using a specific structuring element.
The function dilates the source image using the specified structuring element that determines the shape of a pixel neighborhood over which the maximum is taken:
\[\texttt{dst} (x,y) = \max _{(x',y'): \, \texttt{element} (x',y') \ne0 } \texttt{src} (x+x',y+y')\]
The function supports the inplace mode. Dilation can be applied several ( iterations ) times. In case of multichannel images, each channel is processed independently.
src  input image; the number of channels can be arbitrary, but the depth should be one of CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. 
dst  output image of the same size and type as src. 
kernel  structuring element used for dilation; if elemenat=Mat(), a 3 x 3 rectangular structuring element is used. Kernel can be created using getStructuringElement 
anchor  position of the anchor within the element; default value (1, 1) means that the anchor is at the element center. 
iterations  number of times dilation is applied. 
borderType  pixel extrapolation method, see BorderTypes 
borderValue  border value in case of a constant border 
void cv::erode  (  InputArray  src, 
OutputArray  dst,  
InputArray  kernel,  
Point  anchor = Point(1,1) , 

int  iterations = 1 , 

int  borderType = BORDER_CONSTANT , 

const Scalar &  borderValue = morphologyDefaultBorderValue() 

) 
Erodes an image by using a specific structuring element.
The function erodes the source image using the specified structuring element that determines the shape of a pixel neighborhood over which the minimum is taken:
\[\texttt{dst} (x,y) = \min _{(x',y'): \, \texttt{element} (x',y') \ne0 } \texttt{src} (x+x',y+y')\]
The function supports the inplace mode. Erosion can be applied several ( iterations ) times. In case of multichannel images, each channel is processed independently.
src  input image; the number of channels can be arbitrary, but the depth should be one of CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. 
dst  output image of the same size and type as src. 
kernel  structuring element used for erosion; if element=Mat() , a 3 x 3 rectangular structuring element is used. Kernel can be created using getStructuringElement. 
anchor  position of the anchor within the element; default value (1, 1) means that the anchor is at the element center. 
iterations  number of times erosion is applied. 
borderType  pixel extrapolation method, see BorderTypes 
borderValue  border value in case of a constant border 
void cv::filter2D  (  InputArray  src, 
OutputArray  dst,  
int  ddepth,  
InputArray  kernel,  
Point  anchor = Point(1,1) , 

double  delta = 0 , 

int  borderType = BORDER_DEFAULT 

) 
Convolves an image with the kernel.
The function applies an arbitrary linear filter to an image. Inplace operation is supported. When the aperture is partially outside the image, the function interpolates outlier pixel values according to the specified border mode.
The function does actually compute correlation, not the convolution:
\[\texttt{dst} (x,y) = \sum _{ \stackrel{0\leq x' < \texttt{kernel.cols},}{0\leq y' < \texttt{kernel.rows}} } \texttt{kernel} (x',y')* \texttt{src} (x+x' \texttt{anchor.x} ,y+y' \texttt{anchor.y} )\]
That is, the kernel is not mirrored around the anchor point. If you need a real convolution, flip the kernel using flip and set the new anchor to (kernel.cols  anchor.x  1, kernel.rows  anchor.y  1)
.
The function uses the DFTbased algorithm in case of sufficiently large kernels (~11 x 11
or larger) and the direct algorithm for small kernels.
src  input image. 
dst  output image of the same size and the same number of channels as src. 
ddepth  desired depth of the destination image, see combinations 
kernel  convolution kernel (or rather a correlation kernel), a singlechannel floating point matrix; if you want to apply different kernels to different channels, split the image into separate color planes using split and process them individually. 
anchor  anchor of the kernel that indicates the relative position of a filtered point within the kernel; the anchor should lie within the kernel; default value (1,1) means that the anchor is at the kernel center. 
delta  optional value added to the filtered pixels before storing them in dst. 
borderType  pixel extrapolation method, see BorderTypes 
void cv::GaussianBlur  (  InputArray  src, 
OutputArray  dst,  
Size  ksize,  
double  sigmaX,  
double  sigmaY = 0 , 

int  borderType = BORDER_DEFAULT 

) 
Blurs an image using a Gaussian filter.
The function convolves the source image with the specified Gaussian kernel. Inplace filtering is supported.
src  input image; the image can have any number of channels, which are processed independently, but the depth should be CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. 
dst  output image of the same size and type as src. 
ksize  Gaussian kernel size. ksize.width and ksize.height can differ but they both must be positive and odd. Or, they can be zero's and then they are computed from sigma. 
sigmaX  Gaussian kernel standard deviation in X direction. 
sigmaY  Gaussian kernel standard deviation in Y direction; if sigmaY is zero, it is set to be equal to sigmaX, if both sigmas are zeros, they are computed from ksize.width and ksize.height, respectively (see getGaussianKernel for details); to fully control the result regardless of possible future modifications of all this semantics, it is recommended to specify all of ksize, sigmaX, and sigmaY. 
borderType  pixel extrapolation method, see BorderTypes 
void cv::getDerivKernels  (  OutputArray  kx, 
OutputArray  ky,  
int  dx,  
int  dy,  
int  ksize,  
bool  normalize = false , 

int  ktype = CV_32F 

) 
Returns filter coefficients for computing spatial image derivatives.
The function computes and returns the filter coefficients for spatial image derivatives. When ksize=FILTER_SCHARR
, the Scharr \(3 \times 3\) kernels are generated (see Scharr). Otherwise, Sobel kernels are generated (see Sobel). The filters are normally passed to sepFilter2D or to
kx  Output matrix of row filter coefficients. It has the type ktype . 
ky  Output matrix of column filter coefficients. It has the type ktype . 
dx  Derivative order in respect of x. 
dy  Derivative order in respect of y. 
ksize  Aperture size. It can be FILTER_SCHARR, 1, 3, 5, or 7. 
normalize  Flag indicating whether to normalize (scale down) the filter coefficients or not. Theoretically, the coefficients should have the denominator \(=2^{ksize*2dxdy2}\). If you are going to filter floatingpoint images, you are likely to use the normalized kernels. But if you compute derivatives of an 8bit image, store the results in a 16bit image, and wish to preserve all the fractional bits, you may want to set normalize=false . 
ktype  Type of filter coefficients. It can be CV_32f or CV_64F . 
Mat cv::getGaborKernel  (  Size  ksize, 
double  sigma,  
double  theta,  
double  lambd,  
double  gamma,  
double  psi = CV_PI *0.5 , 

int  ktype = CV_64F 

) 
Returns Gabor filter coefficients.
For more details about gabor filter equations and parameters, see: Gabor Filter.
ksize  Size of the filter returned. 
sigma  Standard deviation of the gaussian envelope. 
theta  Orientation of the normal to the parallel stripes of a Gabor function. 
lambd  Wavelength of the sinusoidal factor. 
gamma  Spatial aspect ratio. 
psi  Phase offset. 
ktype  Type of filter coefficients. It can be CV_32F or CV_64F . 
Mat cv::getGaussianKernel  (  int  ksize, 
double  sigma,  
int  ktype = CV_64F 

) 
Returns Gaussian filter coefficients.
The function computes and returns the \(\texttt{ksize} \times 1\) matrix of Gaussian filter coefficients:
\[G_i= \alpha *e^{(i( \texttt{ksize} 1)/2)^2/(2* \texttt{sigma}^2)},\]
where \(i=0..\texttt{ksize}1\) and \(\alpha\) is the scale factor chosen so that \(\sum_i G_i=1\).
Two of such generated kernels can be passed to sepFilter2D. Those functions automatically recognize smoothing kernels (a symmetrical kernel with sum of weights equal to 1) and handle them accordingly. You may also use the higherlevel GaussianBlur.
ksize  Aperture size. It should be odd ( \(\texttt{ksize} \mod 2 = 1\) ) and positive. 
sigma  Gaussian standard deviation. If it is nonpositive, it is computed from ksize as sigma = 0.3*((ksize1)*0.5  1) + 0.8 . 
ktype  Type of filter coefficients. It can be CV_32F or CV_64F . 
Mat cv::getStructuringElement  (  int  shape, 
Size  ksize,  
Point  anchor = Point(1,1) 

) 
Returns a structuring element of the specified size and shape for morphological operations.
The function constructs and returns the structuring element that can be further passed to erode, dilate or morphologyEx. But you can also construct an arbitrary binary mask yourself and use it as the structuring element.
shape  Element shape that could be one of MorphShapes 
ksize  Size of the structuring element. 
anchor  Anchor position within the element. The default value \((1, 1)\) means that the anchor is at the center. Note that only the shape of a crossshaped element depends on the anchor position. In other cases the anchor just regulates how much the result of the morphological operation is shifted. 
void cv::Laplacian  (  InputArray  src, 
OutputArray  dst,  
int  ddepth,  
int  ksize = 1 , 

double  scale = 1 , 

double  delta = 0 , 

int  borderType = BORDER_DEFAULT 

) 
Calculates the Laplacian of an image.
The function calculates the Laplacian of the source image by adding up the second x and y derivatives calculated using the Sobel operator:
\[\texttt{dst} = \Delta \texttt{src} = \frac{\partial^2 \texttt{src}}{\partial x^2} + \frac{\partial^2 \texttt{src}}{\partial y^2}\]
This is done when ksize > 1
. When ksize == 1
, the Laplacian is computed by filtering the image with the following \(3 \times 3\) aperture:
\[\vecthreethree {0}{1}{0}{1}{4}{1}{0}{1}{0}\]
src  Source image. 
dst  Destination image of the same size and the same number of channels as src . 
ddepth  Desired depth of the destination image. 
ksize  Aperture size used to compute the secondderivative filters. See getDerivKernels for details. The size must be positive and odd. 
scale  Optional scale factor for the computed Laplacian values. By default, no scaling is applied. See getDerivKernels for details. 
delta  Optional delta value that is added to the results prior to storing them in dst . 
borderType  Pixel extrapolation method, see BorderTypes 
void cv::medianBlur  (  InputArray  src, 
OutputArray  dst,  
int  ksize  
) 
Blurs an image using the median filter.
The function smoothes an image using the median filter with the \(\texttt{ksize} \times \texttt{ksize}\) aperture. Each channel of a multichannel image is processed independently. Inplace operation is supported.
src  input 1, 3, or 4channel image; when ksize is 3 or 5, the image depth should be CV_8U, CV_16U, or CV_32F, for larger aperture sizes, it can only be CV_8U. 
dst  destination array of the same size and type as src. 
ksize  aperture linear size; it must be odd and greater than 1, for example: 3, 5, 7 ... 

inlinestatic 
returns "magic" border value for erosion and dilation. It is automatically transformed to Scalar::all(DBL_MAX) for dilation.
void cv::morphologyEx  (  InputArray  src, 
OutputArray  dst,  
int  op,  
InputArray  kernel,  
Point  anchor = Point(1,1) , 

int  iterations = 1 , 

int  borderType = BORDER_CONSTANT , 

const Scalar &  borderValue = morphologyDefaultBorderValue() 

) 
Performs advanced morphological transformations.
The function cv::morphologyEx can perform advanced morphological transformations using an erosion and dilation as basic operations.
Any of the operations can be done inplace. In case of multichannel images, each channel is processed independently.
src  Source image. The number of channels can be arbitrary. The depth should be one of CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. 
dst  Destination image of the same size and type as source image. 
op  Type of a morphological operation, see MorphTypes 
kernel  Structuring element. It can be created using getStructuringElement. 
anchor  Anchor position with the kernel. Negative values mean that the anchor is at the kernel center. 
iterations  Number of times erosion and dilation are applied. 
borderType  Pixel extrapolation method, see BorderTypes 
borderValue  Border value in case of a constant border. The default value has a special meaning. 
void cv::pyrDown  (  InputArray  src, 
OutputArray  dst,  
const Size &  dstsize = Size() , 

int  borderType = BORDER_DEFAULT 

) 
Blurs an image and downsamples it.
By default, size of the output image is computed as Size((src.cols+1)/2, (src.rows+1)/2)
, but in any case, the following conditions should be satisfied:
\[\begin{array}{l}  \texttt{dstsize.width} *2src.cols \leq 2 \\  \texttt{dstsize.height} *2src.rows \leq 2 \end{array}\]
The function performs the downsampling step of the Gaussian pyramid construction. First, it convolves the source image with the kernel:
\[\frac{1}{256} \begin{bmatrix} 1 & 4 & 6 & 4 & 1 \\ 4 & 16 & 24 & 16 & 4 \\ 6 & 24 & 36 & 24 & 6 \\ 4 & 16 & 24 & 16 & 4 \\ 1 & 4 & 6 & 4 & 1 \end{bmatrix}\]
Then, it downsamples the image by rejecting even rows and columns.
src  input image. 
dst  output image; it has the specified size and the same type as src. 
dstsize  size of the output image. 
borderType  Pixel extrapolation method, see BorderTypes (BORDER_CONSTANT isn't supported) 
void cv::pyrMeanShiftFiltering  (  InputArray  src, 
OutputArray  dst,  
double  sp,  
double  sr,  
int  maxLevel = 1 , 

TermCriteria  termcrit = TermCriteria(TermCriteria::MAX_ITER+TermCriteria::EPS, 5, 1) 

) 
Performs initial step of meanshift segmentation of an image.
The function implements the filtering stage of meanshift segmentation, that is, the output of the function is the filtered "posterized" image with color gradients and finegrain texture flattened. At every pixel (X,Y) of the input image (or downsized input image, see below) the function executes meanshift iterations, that is, the pixel (X,Y) neighborhood in the joint spacecolor hyperspace is considered:
\[(x,y): X \texttt{sp} \le x \le X+ \texttt{sp} , Y \texttt{sp} \le y \le Y+ \texttt{sp} , (R,G,B)(r,g,b) \le \texttt{sr}\]
where (R,G,B) and (r,g,b) are the vectors of color components at (X,Y) and (x,y), respectively (though, the algorithm does not depend on the color space used, so any 3component color space can be used instead). Over the neighborhood the average spatial value (X',Y') and average color vector (R',G',B') are found and they act as the neighborhood center on the next iteration:
\[(X,Y)~(X',Y'), (R,G,B)~(R',G',B').\]
After the iterations over, the color components of the initial pixel (that is, the pixel from where the iterations started) are set to the final value (average color at the last iteration):
\[I(X,Y) < (R*,G*,B*)\]
When maxLevel > 0, the gaussian pyramid of maxLevel+1 levels is built, and the above procedure is run on the smallest layer first. After that, the results are propagated to the larger layer and the iterations are run again only on those pixels where the layer colors differ by more than sr from the lowerresolution layer of the pyramid. That makes boundaries of color regions sharper. Note that the results will be actually different from the ones obtained by running the meanshift procedure on the whole original image (i.e. when maxLevel==0).
src  The source 8bit, 3channel image. 
dst  The destination image of the same format and the same size as the source. 
sp  The spatial window radius. 
sr  The color window radius. 
maxLevel  Maximum level of the pyramid for the segmentation. 
termcrit  Termination criteria: when to stop meanshift iterations. 
void cv::pyrUp  (  InputArray  src, 
OutputArray  dst,  
const Size &  dstsize = Size() , 

int  borderType = BORDER_DEFAULT 

) 
Upsamples an image and then blurs it.
By default, size of the output image is computed as Size(src.cols\*2, (src.rows\*2)
, but in any case, the following conditions should be satisfied:
\[\begin{array}{l}  \texttt{dstsize.width} src.cols*2 \leq ( \texttt{dstsize.width} \mod 2) \\  \texttt{dstsize.height} src.rows*2 \leq ( \texttt{dstsize.height} \mod 2) \end{array}\]
The function performs the upsampling step of the Gaussian pyramid construction, though it can actually be used to construct the Laplacian pyramid. First, it upsamples the source image by injecting even zero rows and columns and then convolves the result with the same kernel as in pyrDown multiplied by 4.
src  input image. 
dst  output image. It has the specified size and the same type as src . 
dstsize  size of the output image. 
borderType  Pixel extrapolation method, see BorderTypes (only BORDER_DEFAULT is supported) 
void cv::Scharr  (  InputArray  src, 
OutputArray  dst,  
int  ddepth,  
int  dx,  
int  dy,  
double  scale = 1 , 

double  delta = 0 , 

int  borderType = BORDER_DEFAULT 

) 
Calculates the first x or y image derivative using Scharr operator.
The function computes the first x or y spatial image derivative using the Scharr operator. The call
\[\texttt{Scharr(src, dst, ddepth, dx, dy, scale, delta, borderType)}\]
is equivalent to
\[\texttt{Sobel(src, dst, ddepth, dx, dy, FILTER_SCHARR, scale, delta, borderType)} .\]
src  input image. 
dst  output image of the same size and the same number of channels as src. 
ddepth  output image depth, see combinations 
dx  order of the derivative x. 
dy  order of the derivative y. 
scale  optional scale factor for the computed derivative values; by default, no scaling is applied (see getDerivKernels for details). 
delta  optional delta value that is added to the results prior to storing them in dst. 
borderType  pixel extrapolation method, see BorderTypes 
void cv::sepFilter2D  (  InputArray  src, 
OutputArray  dst,  
int  ddepth,  
InputArray  kernelX,  
InputArray  kernelY,  
Point  anchor = Point(1,1) , 

double  delta = 0 , 

int  borderType = BORDER_DEFAULT 

) 
Applies a separable linear filter to an image.
The function applies a separable linear filter to the image. That is, first, every row of src is filtered with the 1D kernel kernelX. Then, every column of the result is filtered with the 1D kernel kernelY. The final result shifted by delta is stored in dst .
src  Source image. 
dst  Destination image of the same size and the same number of channels as src . 
ddepth  Destination image depth, see combinations 
kernelX  Coefficients for filtering each row. 
kernelY  Coefficients for filtering each column. 
anchor  Anchor position within the kernel. The default value \((1,1)\) means that the anchor is at the kernel center. 
delta  Value added to the filtered results before storing them. 
borderType  Pixel extrapolation method, see BorderTypes 
void cv::Sobel  (  InputArray  src, 
OutputArray  dst,  
int  ddepth,  
int  dx,  
int  dy,  
int  ksize = 3 , 

double  scale = 1 , 

double  delta = 0 , 

int  borderType = BORDER_DEFAULT 

) 
Calculates the first, second, third, or mixed image derivatives using an extended Sobel operator.
In all cases except one, the \(\texttt{ksize} \times \texttt{ksize}\) separable kernel is used to calculate the derivative. When \(\texttt{ksize = 1}\), the \(3 \times 1\) or \(1 \times 3\) kernel is used (that is, no Gaussian smoothing is done). ksize = 1
can only be used for the first or the second x or y derivatives.
There is also the special value ksize = FILTER_SCHARR (1)
that corresponds to the \(3\times3\) Scharr filter that may give more accurate results than the \(3\times3\) Sobel. The Scharr aperture is
\[\vecthreethree{3}{0}{3}{10}{0}{10}{3}{0}{3}\]
for the xderivative, or transposed for the yderivative.
The function calculates an image derivative by convolving the image with the appropriate kernel:
\[\texttt{dst} = \frac{\partial^{xorder+yorder} \texttt{src}}{\partial x^{xorder} \partial y^{yorder}}\]
The Sobel operators combine Gaussian smoothing and differentiation, so the result is more or less resistant to the noise. Most often, the function is called with ( xorder = 1, yorder = 0, ksize = 3) or ( xorder = 0, yorder = 1, ksize = 3) to calculate the first x or y image derivative. The first case corresponds to a kernel of:
\[\vecthreethree{1}{0}{1}{2}{0}{2}{1}{0}{1}\]
The second case corresponds to a kernel of:
\[\vecthreethree{1}{2}{1}{0}{0}{0}{1}{2}{1}\]
src  input image. 
dst  output image of the same size and the same number of channels as src . 
ddepth  output image depth, see combinations; in the case of 8bit input images it will result in truncated derivatives. 
dx  order of the derivative x. 
dy  order of the derivative y. 
ksize  size of the extended Sobel kernel; it must be 1, 3, 5, or 7. 
scale  optional scale factor for the computed derivative values; by default, no scaling is applied (see getDerivKernels for details). 
delta  optional delta value that is added to the results prior to storing them in dst. 
borderType  pixel extrapolation method, see BorderTypes 
void cv::spatialGradient  (  InputArray  src, 
OutputArray  dx,  
OutputArray  dy,  
int  ksize = 3 , 

int  borderType = BORDER_DEFAULT 

) 
Calculates the first order image derivative in both x and y using a Sobel operator.
Equivalent to calling:
src  input image. 
dx  output image with firstorder derivative in x. 
dy  output image with firstorder derivative in y. 
ksize  size of Sobel kernel. It must be 3. 
borderType  pixel extrapolation method, see BorderTypes 
void cv::sqrBoxFilter  (  InputArray  src, 
OutputArray  dst,  
int  ddepth,  
Size  ksize,  
Point  anchor = Point(1,1) , 

bool  normalize = true , 

int  borderType = BORDER_DEFAULT 

) 
Calculates the normalized sum of squares of the pixel values overlapping the filter.
For every pixel \( (x, y) \) in the source image, the function calculates the sum of squares of those neighboring pixel values which overlap the filter placed over the pixel \( (x, y) \).
The unnormalized square box filter can be useful in computing local image statistics such as the the local variance and standard deviation around the neighborhood of a pixel.
src  input image 
dst  output image of the same size and type as _src 
ddepth  the output image depth (1 to use src.depth()) 
ksize  kernel size 
anchor  kernel anchor point. The default value of Point(1, 1) denotes that the anchor is at the kernel center. 
normalize  flag, specifying whether the kernel is to be normalized by it's area or not. 
borderType  border mode used to extrapolate pixels outside of the image, see BorderTypes 