Name

ngx_redis2 - Nginx upstream module for the Redis 2.0 protocol

This module is not distributed with the Nginx source. See the installation instructions.

Table of Contents

Status

This module is already production ready.

Version

This document describes ngx_redis2 v0.13 released on 15 May 2016.

Synopsis

 location = /foo {
     set $value 'first';
     redis2_query set one $value;
     redis2_pass 127.0.0.1:6379;
 }

 # GET /get?key=some_key
 location = /get {
     set_unescape_uri $key $arg_key;  # this requires ngx_set_misc
     redis2_query get $key;
     redis2_pass foo.com:6379;
 }

 # GET /set?key=one&val=first%20value
 location = /set {
     set_unescape_uri $key $arg_key;  # this requires ngx_set_misc
     set_unescape_uri $val $arg_val;  # this requires ngx_set_misc
     redis2_query set $key $val;
     redis2_pass foo.com:6379;
 }

 # multiple pipelined queries
 location = /foo {
     set $value 'first';
     redis2_query set one $value;
     redis2_query get one;
     redis2_query set one two;
     redis2_query get one;
     redis2_pass 127.0.0.1:6379;
 }

 location = /bar {
     # $ is not special here...
     redis2_literal_raw_query '*1\r\n$4\r\nping\r\n';
     redis2_pass 127.0.0.1:6379;
 }

 location = /bar {
     # variables can be used below and $ is special
     redis2_raw_query 'get one\r\n';
     redis2_pass 127.0.0.1:6379;
 }

 # GET /baz?get%20foo%0d%0a
 location = /baz {
     set_unescape_uri $query $query_string; # this requires the ngx_set_misc module
     redis2_raw_query $query;
     redis2_pass 127.0.0.1:6379;
 }

 location = /init {
     redis2_query del key1;
     redis2_query lpush key1 C;
     redis2_query lpush key1 B;
     redis2_query lpush key1 A;
     redis2_pass 127.0.0.1:6379;
 }

 location = /get {
     redis2_query lrange key1 0 -1;
     redis2_pass 127.0.0.1:6379;
 }

Back to TOC

Description

This is an Nginx upstream module that makes nginx talk to a Redis 2.x server in a non-blocking way. The full Redis 2.0 unified protocol has been implemented including the Redis pipelining support.

This module returns the raw TCP response from the Redis server. It's recommended to use my lua-redis-parser (written in pure C) to parse these responses into lua data structure when combined with lua-nginx-module.

When used in conjunction with lua-nginx-module, it is recommended to use the lua-resty-redis library instead of this module though, because the former is much more flexible and memory-efficient.

If you only want to use the get redis command, you can try out the HttpRedisModule. It returns the parsed content part of the Redis response because only get is needed to implement.

Another option is to parse the redis responses on your client side yourself.

Back to TOC

Directives

Back to TOC

redis2_query

syntax: redis2_query cmd arg1 arg2 ...

default: no

context: location, location if

Specify a Redis command by specifying its individual arguments (including the Redis command name itself) in a similar way to the redis-cli utility.

Multiple instances of this directive are allowed in a single location and these queries will be pipelined. For example,

 location = /pipelined {
     redis2_query set hello world;
     redis2_query get hello;

     redis2_pass 127.0.0.1:$TEST_NGINX_REDIS_PORT;
 }

then GET /pipelined will yield two successive raw Redis responses

 +OK
 $5
 world

while newlines here are actually CR LF (\r\n).

Back to TOC

redis2_raw_query

syntax: redis2_raw_query QUERY

default: no

context: location, location if

Specify raw Redis queries and nginx variables are recognized in the QUERY argument.

Only one Redis command is allowed in the QUERY argument, or you'll receive an error. If you want to specify multiple pipelined commands in a single query, use the redis2_raw_queries directive instead.

Back to TOC

redis2_raw_queries

syntax: redis2_raw_queries N QUERIES

default: no

context: location, location if

Specify N commands in the QUERIES argument. Both the N and QUERIES arguments can take Nginx variables.

Here's some examples

 location = /pipelined {
     redis2_raw_queries 3 "flushall\r\nget key1\r\nget key2\r\n";
     redis2_pass 127.0.0.1:6379;
 }

 # GET /pipelined2?n=2&cmds=flushall%0D%0Aget%20key%0D%0A
 location = /pipelined2 {
     set_unescape_uri $n $arg_n;
     set_unescape_uri $cmds $arg_cmds;

     redis2_raw_queries $n $cmds;

     redis2_pass 127.0.0.1:6379;
 }

Note that in the second sample above, the set_unescape_uri directive is provided by the set-misc-nginx-module.

Back to TOC

redis2_literal_raw_query

syntax: redis2_literal_raw_query QUERY

default: no

context: location, location if

Specify a raw Redis query but Nginx variables in it will not be not recognized. In other words, you're free to use the dollar sign character ($) in your QUERY argument.

Only One redis command is allowed in the QUERY argument.

Back to TOC

redis2_pass

syntax: redis2_pass <upstream_name>

syntax: redis2_pass <host>:<port>

default: no

context: location, location if

phase: content

Specify the Redis server backend.

Back to TOC

redis2_connect_timeout

syntax: redis2_connect_timeout <time>

default: 60s

context: http, server, location

The timeout for connecting to the Redis server, in seconds by default.

It's wise to always explicitly specify the time unit to avoid confusion. Time units supported are s(seconds), ms(milliseconds), y(years), M(months), w(weeks), d(days), h(hours), and m(minutes).

This time must be less than 597 hours.

Back to TOC

redis2_send_timeout

syntax: redis2_send_timeout <time>

default: 60s

context: http, server, location

The timeout for sending TCP requests to the Redis server, in seconds by default.

It's wise to always explicitly specify the time unit to avoid confusion. Time units supported are s(seconds), ms(milliseconds), y(years), M(months), w(weeks), d(days), h(hours), and m(minutes).

Back to TOC

redis2_read_timeout

syntax: redis2_read_timeout <time>

default: 60s

context: http, server, location

The timeout for reading TCP responses from the redis server, in seconds by default.

It's wise to always explicitly specify the time unit to avoid confusion. Time units supported are s(seconds), ms(milliseconds), y(years), M(months), w(weeks), d(days), h(hours), and m(minutes).

Back to TOC

redis2_buffer_size

syntax: redis2_buffer_size <size>

default: 4k/8k

context: http, server, location

This buffer size is used for reading Redis replies, but it's not required to be as big as the largest possible Redis reply.

This default size is the page size, may be 4k or 8k.

Back to TOC

redis2_next_upstream

syntax: redis2_next_upstream [ error | timeout | invalid_response | off ]

default: error timeout

context: http, server, location

Specify which failure conditions should cause the request to be forwarded to another upstream server. Applies only when the value in redis2_pass is an upstream with two or more servers.

Here's an artificial example:

 upstream redis_cluster {
     server 127.0.0.1:6379;
     server 127.0.0.1:6380;
 }

 server {
     location = /redis {
         redis2_next_upstream error timeout invalid_response;
         redis2_query get foo;
         redis2_pass redis_cluster;
     }
 }

Back to TOC

Connection Pool

You can use the excellent HttpUpstreamKeepaliveModule with this module to provide TCP connection pool for Redis.

A sample config snippet looks like this

 http {
     upstream backend {
       server 127.0.0.1:6379;

       # a pool with at most 1024 connections
       # and do not distinguish the servers:
       keepalive 1024;
     }

     server {
         ...
         location = /redis {
             set_unescape_uri $query $arg_query;
             redis2_query $query;
             redis2_pass backend;
         }
     }
 }

Back to TOC

Selecting Redis Databases

Redis provides the select command to switch Redis databaess. This command is no different from other normal commands like get or set. So you can use them in redis2_query directives, for example,

redis2_query select 8;
redis2_query get foo;

Back to TOC

Lua Interoperability

This module can be served as a non-blocking redis2 client for lua-nginx-module (but nowadays it is recommended to use the lua-resty-redis library instead, which is much simpler to use and more efficient most of the time). Here's an example using a GET subrequest:

 location = /redis {
     internal;

     # set_unescape_uri is provided by ngx_set_misc
     set_unescape_uri $query $arg_query;

     redis2_raw_query $query;
     redis2_pass 127.0.0.1:6379;
 }

 location = /main {
     content_by_lua '
         local res = ngx.location.capture("/redis",
             { args = { query = "ping\\r\\n" } }
         )
         ngx.print("[" .. res.body .. "]")
     ';
 }

Then accessing /main yields

[+PONG\r\n]

where \r\n is CRLF. That is, this module returns the raw TCP responses from the remote redis server. For Lua-based application developers, they may want to utilize the lua-redis-parser library (written in pure C) to parse such raw responses into Lua data structures.

When moving the inlined Lua code into an external .lua file, it's important to use the escape sequence \r\n directly. We used \\r\\n above just because the Lua code itself needs quoting when being put into an Nginx string literal.

You can also use POST/PUT subrequests to transfer the raw Redis request via request body, which does not require URI escaping and unescaping, thus saving some CPU cycles. Here's such an example:

 location = /redis {
     internal;

     # $echo_request_body is provided by the ngx_echo module
     redis2_raw_query $echo_request_body;

     redis2_pass 127.0.0.1:6379;
 }

 location = /main {
     content_by_lua '
         local res = ngx.location.capture("/redis",
             { method = ngx.HTTP_PUT,
               body = "ping\\r\\n" }
         )
         ngx.print("[" .. res.body .. "]")
     ';
 }

This yeilds exactly the same output as the previous (GET) sample.

One can also use Lua to pick up a concrete Redis backend based on some complicated hashing rules. For instance,

 upstream redis-a {
     server foo.bar.com:6379;
 }

 upstream redis-b {
     server bar.baz.com:6379;
 }

 upstream redis-c {
     server blah.blah.org:6379;
 }

 server {
     ...

     location = /redis {
         set_unescape_uri $query $arg_query;
         redis2_query $query;
         redis2_pass $arg_backend;
     }

     location = /foo {
         content_by_lua "
             -- pick up a server randomly
             local servers = {'redis-a', 'redis-b', 'redis-c'}
             local i = ngx.time() % #servers + 1;
             local srv = servers[i]

             local res = ngx.location.capture('/redis',
                 { args = {
                     query = '...',
                     backend = srv
                   }
                 }
             )
             ngx.say(res.body)
         ";
     }
 }

Back to TOC

Pipelined Redis Requests by Lua

Here's a complete example demonstrating how to use Lua to issue multiple pipelined Redis requests via this Nginx module.

First of all, we include the following in our nginx.conf file:

 location = /redis2 {
     internal;

     redis2_raw_queries $args $echo_request_body;
     redis2_pass 127.0.0.1:6379;
 }

 location = /test {
     content_by_lua_file conf/test.lua;
 }

Basically we use URI query args to pass the number of Redis requests and request body to pass the pipelined Redis request string.

And then we create the conf/test.lua file (whose path is relative to the server root of Nginx) to include the following Lua code:

 -- conf/test.lua
 local parser = require "redis.parser"

 local reqs = {
     {"set", "foo", "hello world"},
     {"get", "foo"}
 }

 local raw_reqs = {}
 for i, req in ipairs(reqs) do
     table.insert(raw_reqs, parser.build_query(req))
 end

 local res = ngx.location.capture("/redis2?" .. #reqs,
     { body = table.concat(raw_reqs, "") })

 if res.status ~= 200 or not res.body then
     ngx.log(ngx.ERR, "failed to query redis")
     ngx.exit(500)
 end

 local replies = parser.parse_replies(res.body, #reqs)
 for i, reply in ipairs(replies) do
     ngx.say(reply[1])
 end

Here we assume that your Redis server is listening on the default port (6379) of the localhost. We also make use of the lua-redis-parser library to construct raw Redis queries for us and also use it to parse the replies.

Accessing the /test location via HTTP clients like curl yields the following output

OK
hello world

A more realistic setting is to use a proper upstream definition for our Redis backend and enable TCP connection pool via the keepalive directive in it.

Back to TOC

Redis Publish/Subscribe Support

This module has limited support for Redis publish/subscribe feature. It cannot be fully supported due to the stateless nature of REST and HTTP model.

Consider the following example:

 location = /redis {
     redis2_raw_queries 2 "subscribe /foo/bar\r\n";
     redis2_pass 127.0.0.1:6379;
 }

And then publish a message for the key /foo/bar in the redis-cli command line. And then you'll receive two multi-bulk replies from the /redis location.

You can surely parse the replies with the lua-redis-parser library if you're using Lua to access this module's location.

Back to TOC

Limitations For Redis Publish/Subscribe

If you want to use the Redis pub/sub feature with this module, then you must note the following limitations:

If you cannot stand these limitations, then you are highly recommended to switch to the lua-resty-redis library for lua-nginx-module.

Back to TOC

Performance Tuning

Back to TOC

Installation

You are recommended to install this module (as well as the Nginx core and many many other goodies) via the ngx_openresty bundle. Check out the installation instructions for setting up ngx_openresty.

Alternatively, you can install this module manually by recompiling the standard Nginx core as follows:

 wget 'http://nginx.org/download/nginx-1.9.15.tar.gz'
 tar -xzvf nginx-1.9.15.tar.gz
 cd nginx-1.9.15/

 # Here we assume you would install you nginx under /opt/nginx/.
 ./configure --prefix=/opt/nginx \
             --add-module=/path/to/redis2-nginx-module

 make -j2
 make install

Starting from NGINX 1.9.11, you can also compile this module as a dynamic module, by using the --add-dynamic-module=PATH option instead of --add-module=PATH on the ./configure command line above. And then you can explicitly load the module in your nginx.conf via the load_module directive, for example,

load_module /path/to/modules/ngx_http_redis2_module.so;

Back to TOC

Compatibility

Redis 2.0, 2.2, 2.4, and above should work with this module without any issues. So is the Alchemy Database (aka redisql in its early days).

The following versions of Nginx should work with this module:

Earlier versions of Nginx will not work.

If you find that any particular version of Nginx above 0.8.31 does not work with this module, please consider reporting a bug.

Back to TOC

Community

Back to TOC

English Mailing List

The openresty-en mailing list is for English speakers.

Back to TOC

Chinese Mailing List

The openresty mailing list is for Chinese speakers.

Back to TOC

Bugs and Patches

Please submit bug reports, wishlists, or patches by

  1. creating a ticket on the GitHub Issue Tracker,
  2. or posting to the OpenResty community.

Back to TOC

Source Repository

Available on github at openresty/redis2-nginx-module.

Back to TOC

TODO

Back to TOC

Author

Yichun "agentzh" Zhang (章亦春) agentzh@gmail.com, CloudFlare Inc.

Back to TOC

Getting involved

You'll be very welcomed to submit patches to the author or just ask for a commit bit to the source repository on GitHub.

Back to TOC

Copyright & License

This module is licenced under the BSD license.

Copyright (C) 2010-2016, by Yichun "agentzh" Zhang (章亦春) agentzh@gmail.com, CloudFlare Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Back to TOC

SEE ALSO

Back to TOC