QShaderProgram Class
(Qt3DRender::QShaderProgram)Encapsulates a Shader Program. More...
| Header: | #include <QShaderProgram> |
| qmake: | QT += 3drender |
| Since: | Qt 5.5 |
| Instantiated By: | ShaderProgram |
| Inherits: | Qt3DCore::QNode |
Public Types
| enum | ShaderType { Vertex, Fragment, TessellationControl, TessellationEvaluation, Geometry, Compute } |
| enum | Status { NotReady, Ready, Error } |
Properties
|
|
- 3 properties inherited from Qt3DCore::QNode
- 1 property inherited from QObject
Public Functions
| QShaderProgram(Qt3DCore::QNode *parent = nullptr) | |
| virtual | ~QShaderProgram() |
| QByteArray | computeShaderCode() const |
| QByteArray | fragmentShaderCode() const |
| QByteArray | geometryShaderCode() const |
| QString | log() const |
| void | setShaderCode(Qt3DRender::QShaderProgram::ShaderType type, const QByteArray &shaderCode) |
| QByteArray | shaderCode(Qt3DRender::QShaderProgram::ShaderType type) const |
| Qt3DRender::QShaderProgram::Status | status() const |
| QByteArray | tessellationControlShaderCode() const |
| QByteArray | tessellationEvaluationShaderCode() const |
| QByteArray | vertexShaderCode() const |
- 13 public functions inherited from Qt3DCore::QNode
- 31 public functions inherited from QObject
Public Slots
| void | setComputeShaderCode(const QByteArray &computeShaderCode) |
| void | setFragmentShaderCode(const QByteArray &fragmentShaderCode) |
| void | setGeometryShaderCode(const QByteArray &geometryShaderCode) |
| void | setTessellationControlShaderCode(const QByteArray &tessellationControlShaderCode) |
| void | setTessellationEvaluationShaderCode(const QByteArray &tessellationEvaluationShaderCode) |
| void | setVertexShaderCode(const QByteArray &vertexShaderCode) |
- 3 public slots inherited from Qt3DCore::QNode
- 1 public slot inherited from QObject
Signals
| void | computeShaderCodeChanged(const QByteArray &computeShaderCode) |
| void | fragmentShaderCodeChanged(const QByteArray &fragmentShaderCode) |
| void | geometryShaderCodeChanged(const QByteArray &geometryShaderCode) |
| void | logChanged(const QString &log) |
| void | statusChanged(Qt3DRender::QShaderProgram::Status status) |
| void | tessellationControlShaderCodeChanged(const QByteArray &tessellationControlShaderCode) |
| void | tessellationEvaluationShaderCodeChanged(const QByteArray &tessellationEvaluationShaderCode) |
| void | vertexShaderCodeChanged(const QByteArray &vertexShaderCode) |
- 4 signals inherited from Qt3DCore::QNode
- 2 signals inherited from QObject
Static Public Members
| QByteArray | loadSource(const QUrl &sourceUrl) |
| const QMetaObject | staticMetaObject |
- 9 static public members inherited from QObject
Reimplemented Protected Functions
| virtual void | sceneChangeEvent(const Qt3DCore::QSceneChangePtr &change) override |
- 2 protected functions inherited from Qt3DCore::QNode
- 9 protected functions inherited from QObject
Detailed Description
Encapsulates a Shader Program.
A shader program consists of several different shaders, such as vertex and fragment shaders.
Qt3D will automatically populate a set of default uniforms if they are encountered during the shader instrospection phase.
| Default Uniform | Associated Qt3D Parameter name | GLSL declaration | |||
|---|---|---|---|---|---|
| ModelMatrix | modelMatrix | uniform mat4 modelMatrix; | |||
| ViewMatrix | viewMatrix | uniform mat4 viewMatrix; | |||
| ProjectionMatrix | projectionMatrix | uniform mat4 projectionMatrix; | |||
| ModelViewMatrix | modelView | uniform mat4 modelView; | |||
| ViewProjectionMatrix | viewProjectionMatrix | uniform mat4 viewProjectionMatrix; | |||
| ModelViewProjectionMatrix | modelViewProjection mvp | uniform mat4 modelViewProjection; uniform mat4 mvp; | |||
| InverseModelMatrix | inverseModelMatrix | uniform mat4 inverseModelMatrix; | |||
| InverseViewMatrix | inverseViewMatrix | uniform mat4 inverseViewMatrix; | |||
| InverseProjectionMatrix | inverseProjectionMatrix | uniform mat4 inverseProjectionMatrix; | |||
| InverseModelViewMatrix | inverseModelView | uniform mat4 inverseModelView; | |||
| InverseViewProjectionMatrix | inverseViewProjectionMatrix | uniform mat4 inverseViewProjectionMatrix; | |||
| InverseModelViewProjectionMatrix | inverseModelViewProjection | uniform mat4 inverseModelViewProjection; | |||
| ModelNormalMatrix | modelNormalMatrix | uniform mat3 modelNormalMatrix; | |||
| ModelViewNormalMatrix | modelViewNormal | uniform mat3 modelViewNormal; | |||
| ViewportMatrix | viewportMatrix | uniform mat4 viewportMatrix; | |||
| InverseViewportMatrix | inverseViewportMatrix | uniform mat4 inverseViewportMatrix; | |||
| AspectRatio (surface width / surface height) | aspectRatio | uniform float aspectRatio; | |||
| Exposure | exposure | uniform float exposure; | |||
| Gamma | gamma | uniform float gamma; | |||
| Time (in nano seconds) | time | uniform float time; | |||
| EyePosition | eyePosition | uniform vec3 eyePosition; | |||
| SkinningPalette | skinningPalette[0] | const int maxJoints = 100; uniform mat4 skinningPalette[maxJoints]; | |||
Member Type Documentation
enum QShaderProgram::ShaderType
This enum identifies the type of shader used.
| Constant | Value | Description |
|---|---|---|
Qt3DRender::QShaderProgram::Vertex | 0 | Vertex shader |
Qt3DRender::QShaderProgram::Fragment | 1 | Fragment shader |
Qt3DRender::QShaderProgram::TessellationControl | 2 | Tesselation control shader |
Qt3DRender::QShaderProgram::TessellationEvaluation | 3 | Tesselation evaluation shader |
Qt3DRender::QShaderProgram::Geometry | 4 | Geometry shader |
Qt3DRender::QShaderProgram::Compute | 5 | Compute shader |
enum QShaderProgram::Status
This enum identifies the status of shader used.
| Constant | Value | Description |
|---|---|---|
Qt3DRender::QShaderProgram::NotReady | 0 | The shader hasn't been compiled and linked yet |
Qt3DRender::QShaderProgram::Ready | 1 | The shader was successfully compiled |
Qt3DRender::QShaderProgram::Error | 2 | An error occurred while compiling the shader |
Property Documentation
computeShaderCode : QByteArray
Holds the compute shader code used by this shader program.
Access functions:
| QByteArray | computeShaderCode() const |
| void | setComputeShaderCode(const QByteArray &computeShaderCode) |
Notifier signal:
| void | computeShaderCodeChanged(const QByteArray &computeShaderCode) |
fragmentShaderCode : QByteArray
Holds the fragment shader code used by this shader program.
Access functions:
| QByteArray | fragmentShaderCode() const |
| void | setFragmentShaderCode(const QByteArray &fragmentShaderCode) |
Notifier signal:
| void | fragmentShaderCodeChanged(const QByteArray &fragmentShaderCode) |
geometryShaderCode : QByteArray
Holds the geometry shader code used by this shader program.
Access functions:
| QByteArray | geometryShaderCode() const |
| void | setGeometryShaderCode(const QByteArray &geometryShaderCode) |
Notifier signal:
| void | geometryShaderCodeChanged(const QByteArray &geometryShaderCode) |
log : const QString
Holds the log of the current shader program. This is useful to diagnose a compilation failure of the shader program.
Access functions:
| QString | log() const |
Notifier signal:
| void | logChanged(const QString &log) |
status : const Status
Holds the status of the current shader program.
Access functions:
| Qt3DRender::QShaderProgram::Status | status() const |
Notifier signal:
| void | statusChanged(Qt3DRender::QShaderProgram::Status status) |
tessellationControlShaderCode : QByteArray
Holds the tesselation control shader code used by this shader program.
Access functions:
| QByteArray | tessellationControlShaderCode() const |
| void | setTessellationControlShaderCode(const QByteArray &tessellationControlShaderCode) |
Notifier signal:
| void | tessellationControlShaderCodeChanged(const QByteArray &tessellationControlShaderCode) |
tessellationEvaluationShaderCode : QByteArray
Holds the tesselation evaluation shader code used by this shader program.
Access functions:
| QByteArray | tessellationEvaluationShaderCode() const |
| void | setTessellationEvaluationShaderCode(const QByteArray &tessellationEvaluationShaderCode) |
Notifier signal:
| void | tessellationEvaluationShaderCodeChanged(const QByteArray &tessellationEvaluationShaderCode) |
vertexShaderCode : QByteArray
Holds the vertex shader code used by this shader program.
Access functions:
| QByteArray | vertexShaderCode() const |
| void | setVertexShaderCode(const QByteArray &vertexShaderCode) |
Notifier signal:
| void | vertexShaderCodeChanged(const QByteArray &vertexShaderCode) |
Member Function Documentation
QShaderProgram::QShaderProgram(Qt3DCore::QNode *parent = nullptr)
Default constructs an instance of QShaderProgram.
[virtual] QShaderProgram::~QShaderProgram()
Destroys the instance of QShaderProgram. The destructor is virtual.
[static] QByteArray QShaderProgram::loadSource(const QUrl &sourceUrl)
Returns the shader code loaded from sourceUrl.
Note: This function can be invoked via the meta-object system and from QML. See Q_INVOKABLE.
[override virtual protected] void QShaderProgram::sceneChangeEvent(const Qt3DCore::QSceneChangePtr &change)
Reimplemented from QNode::sceneChangeEvent().
Posts a scene change with parameter change.
void QShaderProgram::setShaderCode(Qt3DRender::QShaderProgram::ShaderType type, const QByteArray &shaderCode)
Sets the shader code for type of shader to the shaderCode.
See also shaderCode().
QByteArray QShaderProgram::shaderCode(Qt3DRender::QShaderProgram::ShaderType type) const
Returns the shader code for type.
See also setShaderCode().
Qt3DRender::QShaderProgram::Status QShaderProgram::status() const
Returns the status of the current shader program.
Note: Getter function for property status.
© 2019 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.