QTime Class
The QTime class provides clock time functions. More...
Header: | #include <QTime> |
qmake: | QT += core |
Note: All functions in this class are reentrant.
Public Types
Public Functions
QTime() | |
QTime(int h, int m, int s = 0, int ms = 0) | |
QTime | addMSecs(int ms) const |
QTime | addSecs(int s) const |
int | elapsed() const |
int | hour() const |
bool | isNull() const |
bool | isValid() const |
int | minute() const |
int | msec() const |
int | msecsSinceStartOfDay() const |
int | msecsTo(const QTime &t) const |
int | restart() |
int | second() const |
int | secsTo(const QTime &t) const |
bool | setHMS(int h, int m, int s, int ms = 0) |
void | start() |
QString | toString(const QString &format) const |
QString | toString(Qt::DateFormat format = Qt::TextDate) const |
QString | toString(QStringView format) const |
bool | operator!=(const QTime &t) const |
bool | operator<(const QTime &t) const |
bool | operator<=(const QTime &t) const |
bool | operator==(const QTime &t) const |
bool | operator>(const QTime &t) const |
bool | operator>=(const QTime &t) const |
Static Public Members
QTime | currentTime() |
QTime | fromMSecsSinceStartOfDay(int msecs) |
QTime | fromString(const QString &string, Qt::DateFormat format = Qt::TextDate) |
QTime | fromString(const QString &string, const QString &format) |
bool | isValid(int h, int m, int s, int ms = 0) |
Related Non-Members
QDataStream & | operator<<(QDataStream &out, const QTime &time) |
QDataStream & | operator>>(QDataStream &in, QTime &time) |
Detailed Description
The QTime class provides clock time functions.
A QTime object contains a clock time, which it can express as the numbers of hours, minutes, seconds, and milliseconds since midnight. It can read the current time from the system clock and measure a span of elapsed time. It provides functions for comparing times and for manipulating a time by adding a number of milliseconds.
QTime uses the 24-hour clock format; it has no concept of AM/PM. Unlike QDateTime, QTime knows nothing about time zones or daylight-saving time (DST).
A QTime object is typically created either by giving the number of hours, minutes, seconds, and milliseconds explicitly, or by using the static function currentTime(), which creates a QTime object that contains the system's local time. Note that the accuracy depends on the accuracy of the underlying operating system; not all systems provide 1-millisecond accuracy.
The hour(), minute(), second(), and msec() functions provide access to the number of hours, minutes, seconds, and milliseconds of the time. The same information is provided in textual format by the toString() function.
The addSecs() and addMSecs() functions provide the time a given number of seconds or milliseconds later than a given time. Correspondingly, the number of seconds or milliseconds between two times can be found using secsTo() or msecsTo().
QTime provides a full set of operators to compare two QTime objects; an earlier time is considered smaller than a later one; if A.msecsTo(B) is positive, then A < B.
QTime can be used to measure a span of elapsed time using the start(), restart(), and elapsed() functions.
Member Function Documentation
QString QTime::toString(const QString &format) const
QString QTime::toString(QStringView format) const
Returns the time as a string. The format parameter determines the format of the result string.
These expressions may be used:
Expression | Output |
---|---|
h | the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display) |
hh | the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display) |
H | the hour without a leading zero (0 to 23, even with AM/PM display) |
HH | the hour with a leading zero (00 to 23, even with AM/PM display) |
m | the minute without a leading zero (0 to 59) |
mm | the minute with a leading zero (00 to 59) |
s | the whole second, without any leading zero (0 to 59) |
ss | the whole second, with a leading zero where applicable (00 to 59) |
z | the fractional part of the second, to go after a decimal point, without trailing zeroes (0 to 999). Thus "s.z " reports the seconds to full available (millisecond) precision without trailing zeroes. |
zzz | the fractional part of the second, to millisecond precision, including trailing zeroes where applicable (000 to 999). |
AP or A | use AM/PM display. A/AP will be replaced by either QLocale::amText() or QLocale::pmText(). |
ap or a | use am/pm display. a/ap will be replaced by a lower-case version of QLocale::amText() or QLocale::pmText(). |
t | the timezone (for example "CEST") |
Any sequence of characters enclosed in single quotes will be included verbatim in the output string (stripped of the quotes), even if it contains formatting characters. Two consecutive single quotes ("''") are replaced by a single quote in the output. All other characters in the format string are included verbatim in the output string.
Formats without separators (e.g. "ddMM") are supported but must be used with care, as the resulting strings aren't always reliably readable (e.g. if "dM" produces "212" it could mean either the 2nd of December or the 21st of February).
Example format strings (assuming that the QTime is 14:13:09.042 and the system locale is en_US
)
Format | Result |
---|---|
hh:mm:ss.zzz | 14:13:09.042 |
h:m:s ap | 2:13:9 pm |
H:m:s a | 14:13:9 pm |
If the time is invalid, an empty string will be returned. If format is empty, the default format "hh:mm:ss" is used.
See also fromString(), QDate::toString(), QDateTime::toString(), and QLocale::toString().
QTime::QTime()
Constructs a null time object. A null time can be a QTime(0, 0, 0, 0) (i.e., midnight) object, except that isNull() returns true
and isValid() returns false
.
See also isNull() and isValid().
QTime::QTime(int h, int m, int s = 0, int ms = 0)
Constructs a time with hour h, minute m, seconds s and milliseconds ms.
h must be in the range 0 to 23, m and s must be in the range 0 to 59, and ms must be in the range 0 to 999.
See also isValid().
QTime QTime::addMSecs(int ms) const
Returns a QTime object containing a time ms milliseconds later than the time of this object (or earlier if ms is negative).
Note that the time will wrap if it passes midnight. See addSecs() for an example.
Returns a null time if this time is invalid.
See also addSecs(), msecsTo(), and QDateTime::addMSecs().
QTime QTime::addSecs(int s) const
Returns a QTime object containing a time s seconds later than the time of this object (or earlier if s is negative).
Note that the time will wrap if it passes midnight.
Returns a null time if this time is invalid.
Example:
QTime n(14, 0, 0); // n == 14:00:00 QTime t; t = n.addSecs(70); // t == 14:01:10 t = n.addSecs(-70); // t == 13:58:50 t = n.addSecs(10 * 60 * 60 + 5); // t == 00:00:05 t = n.addSecs(-15 * 60 * 60); // t == 23:00:00
See also addMSecs(), secsTo(), and QDateTime::addSecs().
[static]
QTime QTime::currentTime()
Returns the current time as reported by the system clock.
Note that the accuracy depends on the accuracy of the underlying operating system; not all systems provide 1-millisecond accuracy.
int QTime::elapsed() const
Returns the number of milliseconds that have elapsed since the last time start() or restart() was called.
Note that the counter wraps to zero 24 hours after the last call to start() or restart.
Note that the accuracy depends on the accuracy of the underlying operating system; not all systems provide 1-millisecond accuracy.
Warning: If the system's clock setting has been changed since the last time start() or restart() was called, the result is undefined. This can happen when daylight-saving time is turned on or off.
See also start() and restart().
[static]
QTime QTime::fromMSecsSinceStartOfDay(int msecs)
Returns a new QTime instance with the time set to the number of msecs since the start of the day, i.e. since 00:00:00.
If msecs falls outside the valid range an invalid QTime will be returned.
See also msecsSinceStartOfDay().
[static]
QTime QTime::fromString(const QString &string, Qt::DateFormat format = Qt::TextDate)
Returns the time represented in the string as a QTime using the format given, or an invalid time if this is not possible.
Note that fromString() uses a "C" locale encoded string to convert milliseconds to a float value. If the default locale is not "C", this may result in two conversion attempts (if the conversion fails for the default locale). This should be considered an implementation detail.
See also toString() and QLocale::toTime().
[static]
QTime QTime::fromString(const QString &string, const QString &format)
Returns the QTime represented by the string, using the format given, or an invalid time if the string cannot be parsed.
These expressions may be used for the format:
Expression | Output |
---|---|
h | the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display) |
hh | the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display) |
m | the minute without a leading zero (0 to 59) |
mm | the minute with a leading zero (00 to 59) |
s | the whole second, without any leading zero (0 to 59) |
ss | the whole second, with a leading zero where applicable (00 to 59) |
z | the fractional part of the second, to go after a decimal point, without trailing zeroes (0 to 999). Thus "s.z " reports the seconds to full available (millisecond) precision without trailing zeroes. |
zzz | the fractional part of the second, to millisecond precision, including trailing zeroes where applicable (000 to 999). |
AP | interpret as an AM/PM time. AP must be either "AM" or "PM". |
ap | Interpret as an AM/PM time. ap must be either "am" or "pm". |
All other input characters will be treated as text. Any sequence of characters that are enclosed in single quotes will also be treated as text and not be used as an expression.
If the format is not satisfied, an invalid QTime is returned. Expressions that do not expect leading zeroes to be given (h, m, s and z) are greedy. This means that they will use two digits even if this puts them outside the range of accepted values and leaves too few digits for other sections. For example, the following string could have meant 00:07:10, but the m will grab two digits, resulting in an invalid time:
Any field that is not represented in the format will be set to zero. For example:
See also toString(), QDateTime::fromString(), QDate::fromString(), and QLocale::toTime().
int QTime::hour() const
Returns the hour part (0 to 23) of the time.
Returns -1 if the time is invalid.
See also minute(), second(), and msec().
bool QTime::isNull() const
Returns true
if the time is null (i.e., the QTime object was constructed using the default constructor); otherwise returns false. A null time is also an invalid time.
See also isValid().
bool QTime::isValid() const
Returns true
if the time is valid; otherwise returns false
. For example, the time 23:30:55.746 is valid, but 24:12:30 is invalid.
See also isNull().
[static]
bool QTime::isValid(int h, int m, int s, int ms = 0)
This is an overloaded function.
Returns true
if the specified time is valid; otherwise returns false.
The time is valid if h is in the range 0 to 23, m and s are in the range 0 to 59, and ms is in the range 0 to 999.
Example:
int QTime::minute() const
Returns the minute part (0 to 59) of the time.
Returns -1 if the time is invalid.
See also hour(), second(), and msec().
int QTime::msec() const
Returns the millisecond part (0 to 999) of the time.
Returns -1 if the time is invalid.
See also hour(), minute(), and second().
int QTime::msecsSinceStartOfDay() const
Returns the number of msecs since the start of the day, i.e. since 00:00:00.
See also fromMSecsSinceStartOfDay().
int QTime::msecsTo(const QTime &t) const
Returns the number of milliseconds from this time to t. If t is earlier than this time, the number of milliseconds returned is negative.
Because QTime measures time within a day and there are 86400 seconds in a day, the result is always between -86400000 and 86400000 ms.
Returns 0 if either time is invalid.
See also secsTo(), addMSecs(), and QDateTime::msecsTo().
int QTime::restart()
Sets this time to the current time and returns the number of milliseconds that have elapsed since the last time start() or restart() was called.
This function is guaranteed to be atomic and is thus very handy for repeated measurements. Call start() to start the first measurement, and restart() for each later measurement.
Note that the counter wraps to zero 24 hours after the last call to start() or restart().
Warning: If the system's clock setting has been changed since the last time start() or restart() was called, the result is undefined. This can happen when daylight-saving time is turned on or off.
See also start(), elapsed(), and currentTime().
int QTime::second() const
Returns the second part (0 to 59) of the time.
Returns -1 if the time is invalid.
See also hour(), minute(), and msec().
int QTime::secsTo(const QTime &t) const
Returns the number of seconds from this time to t. If t is earlier than this time, the number of seconds returned is negative.
Because QTime measures time within a day and there are 86400 seconds in a day, the result is always between -86400 and 86400.
secsTo() does not take into account any milliseconds.
Returns 0 if either time is invalid.
See also addSecs() and QDateTime::secsTo().
bool QTime::setHMS(int h, int m, int s, int ms = 0)
Sets the time to hour h, minute m, seconds s and milliseconds ms.
h must be in the range 0 to 23, m and s must be in the range 0 to 59, and ms must be in the range 0 to 999. Returns true
if the set time is valid; otherwise returns false
.
See also isValid().
void QTime::start()
Sets this time to the current time. This is practical for timing:
See also restart(), elapsed(), and currentTime().
QString QTime::toString(Qt::DateFormat format = Qt::TextDate) const
This is an overloaded function.
Returns the time as a string. The format parameter determines the format of the string.
If format is Qt::TextDate, the string format is HH:mm:ss; e.g. 1 second before midnight would be "23:59:59".
If format is Qt::ISODate, the string format corresponds to the ISO 8601 extended specification for representations of dates, represented by HH:mm:ss. To include milliseconds in the ISO 8601 date, use the format Qt::ISODateWithMs, which corresponds to HH:mm:ss.zzz.
If the format is Qt::SystemLocaleShortDate or Qt::SystemLocaleLongDate, the string format depends on the locale settings of the system. Identical to calling QLocale::system().toString(time, QLocale::ShortFormat) or QLocale::system().toString(time, QLocale::LongFormat).
If the format is Qt::DefaultLocaleShortDate or Qt::DefaultLocaleLongDate, the string format depends on the default application locale. This is the locale set with QLocale::setDefault(), or the system locale if no default locale has been set. Identical to calling
QLocale().toString(time, QLocale::ShortFormat) or QLocale().toString(time, QLocale::LongFormat).
If the format is Qt::RFC2822Date, the string is formatted in an RFC 2822 compatible way. An example of this formatting is "23:59:20".
If the time is invalid, an empty string will be returned.
See also fromString(), QDate::toString(), QDateTime::toString(), and QLocale::toString().
bool QTime::operator!=(const QTime &t) const
Returns true
if this time is different from t; otherwise returns false
.
bool QTime::operator<(const QTime &t) const
Returns true
if this time is earlier than t; otherwise returns false
.
bool QTime::operator<=(const QTime &t) const
Returns true
if this time is earlier than or equal to t; otherwise returns false
.
bool QTime::operator==(const QTime &t) const
Returns true
if this time is equal to t; otherwise returns false
.
bool QTime::operator>(const QTime &t) const
Returns true
if this time is later than t; otherwise returns false
.
bool QTime::operator>=(const QTime &t) const
Returns true
if this time is later than or equal to t; otherwise returns false
.
Related Non-Members
QDataStream &operator<<(QDataStream &out, const QTime &time)
Writes time to stream out.
See also Serializing Qt Data Types.
QDataStream &operator>>(QDataStream &in, QTime &time)
Reads a time from stream in into the given time.
See also Serializing Qt Data Types.
© 2019 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.