/****************************************************************************
**
** Copyright (C) 2016 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** BSD License Usage
** Alternatively, you may use this file under the terms of the BSD license
** as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of The Qt Company Ltd nor the names of its
**     contributors may be used to endorse or promote products derived
**     from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include <QtWidgets>

#include "window.h"

Window::Window()
{
    createSpinBoxes();
    createDateTimeEdits();
    createDoubleSpinBoxes();

    QHBoxLayout *layout = new QHBoxLayout;
    layout->addWidget(spinBoxesGroup);
    layout->addWidget(editsGroup);
    layout->addWidget(doubleSpinBoxesGroup);
    setLayout(layout);

    setWindowTitle(tr("Spin Boxes"));
}

void Window::createSpinBoxes()
{
    spinBoxesGroup = new QGroupBox(tr("Spinboxes"));

    QLabel *integerLabel = new QLabel(tr("Enter a value between "
        "%1 and %2:").arg(-20).arg(20));
    QSpinBox *integerSpinBox = new QSpinBox;
    integerSpinBox->setRange(-20, 20);
    integerSpinBox->setSingleStep(1);
    integerSpinBox->setValue(0);

    QLabel *zoomLabel = new QLabel(tr("Enter a zoom value between "
        "%1 and %2:").arg(0).arg(1000));
    QSpinBox *zoomSpinBox = new QSpinBox;
    zoomSpinBox->setRange(0, 1000);
    zoomSpinBox->setSingleStep(10);
    zoomSpinBox->setSuffix("%");
    zoomSpinBox->setSpecialValueText(tr("Automatic"));
    zoomSpinBox->setValue(100);

    QLabel *priceLabel = new QLabel(tr("Enter a price between "
        "%1 and %2:").arg(0).arg(999));
    QSpinBox *priceSpinBox = new QSpinBox;
    priceSpinBox->setRange(0, 999);
    priceSpinBox->setSingleStep(1);
    priceSpinBox->setPrefix("$");
    priceSpinBox->setValue(99);

    groupSeparatorSpinBox = new QSpinBox;
    groupSeparatorSpinBox->setRange(-99999999, 99999999);
    groupSeparatorSpinBox->setValue(1000);
    groupSeparatorSpinBox->setGroupSeparatorShown(true);
    QCheckBox *groupSeparatorChkBox = new QCheckBox;
    groupSeparatorChkBox->setText(tr("Show group separator"));
    groupSeparatorChkBox->setChecked(true);
    connect(groupSeparatorChkBox, &QCheckBox::toggled, groupSeparatorSpinBox,
            &QSpinBox::setGroupSeparatorShown);

    QLabel *hexLabel = new QLabel(tr("Enter a value between "
        "%1 and %2:").arg('-' + QString::number(31, 16)).arg(QString::number(31, 16)));
    QSpinBox *hexSpinBox = new QSpinBox;
    hexSpinBox->setRange(-31, 31);
    hexSpinBox->setSingleStep(1);
    hexSpinBox->setValue(0);
    hexSpinBox->setDisplayIntegerBase(16);

    QVBoxLayout *spinBoxLayout = new QVBoxLayout;
    spinBoxLayout->addWidget(integerLabel);
    spinBoxLayout->addWidget(integerSpinBox);
    spinBoxLayout->addWidget(zoomLabel);
    spinBoxLayout->addWidget(zoomSpinBox);
    spinBoxLayout->addWidget(priceLabel);
    spinBoxLayout->addWidget(priceSpinBox);
    spinBoxLayout->addWidget(hexLabel);
    spinBoxLayout->addWidget(hexSpinBox);
    spinBoxLayout->addWidget(groupSeparatorChkBox);
    spinBoxLayout->addWidget(groupSeparatorSpinBox);
    spinBoxesGroup->setLayout(spinBoxLayout);
}

void Window::createDateTimeEdits()
{
    editsGroup = new QGroupBox(tr("Date and time spin boxes"));

    QLabel *dateLabel = new QLabel;
    QDateEdit *dateEdit = new QDateEdit(QDate::currentDate());
    dateEdit->setDateRange(QDate(2005, 1, 1), QDate(2010, 12, 31));
    dateLabel->setText(tr("Appointment date (between %0 and %1):")
                       .arg(dateEdit->minimumDate().toString(Qt::ISODate))
                       .arg(dateEdit->maximumDate().toString(Qt::ISODate)));

    QLabel *timeLabel = new QLabel;
    QTimeEdit *timeEdit = new QTimeEdit(QTime::currentTime());
    timeEdit->setTimeRange(QTime(9, 0, 0, 0), QTime(16, 30, 0, 0));
    timeLabel->setText(tr("Appointment time (between %0 and %1):")
                       .arg(timeEdit->minimumTime().toString(Qt::ISODate))
                       .arg(timeEdit->maximumTime().toString(Qt::ISODate)));

    meetingLabel = new QLabel;
    meetingEdit = new QDateTimeEdit(QDateTime::currentDateTime());

    QLabel *formatLabel = new QLabel(tr("Format string for the meeting date "
                                        "and time:"));
    QComboBox *formatComboBox = new QComboBox;
    formatComboBox->addItem("yyyy-MM-dd hh:mm:ss (zzz 'ms')");
    formatComboBox->addItem("hh:mm:ss MM/dd/yyyy");
    formatComboBox->addItem("hh:mm:ss dd/MM/yyyy");
    formatComboBox->addItem("hh:mm:ss");
    formatComboBox->addItem("hh:mm ap");

    connect(formatComboBox, SIGNAL(activated(QString)),
            this, SLOT(setFormatString(QString)));

    setFormatString(formatComboBox->currentText());

    QVBoxLayout *editsLayout = new QVBoxLayout;
    editsLayout->addWidget(dateLabel);
    editsLayout->addWidget(dateEdit);
    editsLayout->addWidget(timeLabel);
    editsLayout->addWidget(timeEdit);
    editsLayout->addWidget(meetingLabel);
    editsLayout->addWidget(meetingEdit);
    editsLayout->addWidget(formatLabel);
    editsLayout->addWidget(formatComboBox);
    editsGroup->setLayout(editsLayout);
}

void Window::setFormatString(const QString &formatString)
{
    meetingEdit->setDisplayFormat(formatString);
    if (meetingEdit->displayedSections() & QDateTimeEdit::DateSections_Mask) {
        meetingEdit->setDateRange(QDate(2004, 11, 1), QDate(2005, 11, 30));
        meetingLabel->setText(tr("Meeting date (between %0 and %1):")
            .arg(meetingEdit->minimumDate().toString(Qt::ISODate))
            .arg(meetingEdit->maximumDate().toString(Qt::ISODate)));
    } else {
        meetingEdit->setTimeRange(QTime(0, 7, 20, 0), QTime(21, 0, 0, 0));
        meetingLabel->setText(tr("Meeting time (between %0 and %1):")
            .arg(meetingEdit->minimumTime().toString(Qt::ISODate))
            .arg(meetingEdit->maximumTime().toString(Qt::ISODate)));
    }
}

void Window::createDoubleSpinBoxes()
{
    doubleSpinBoxesGroup = new QGroupBox(tr("Double precision spinboxes"));

    QLabel *precisionLabel = new QLabel(tr("Number of decimal places "
                                           "to show:"));
    QSpinBox *precisionSpinBox = new QSpinBox;
    precisionSpinBox->setRange(0, 100);
    precisionSpinBox->setValue(2);

    QLabel *doubleLabel = new QLabel(tr("Enter a value between "
        "%1 and %2:").arg(-20).arg(20));
    doubleSpinBox = new QDoubleSpinBox;
    doubleSpinBox->setRange(-20.0, 20.0);
    doubleSpinBox->setSingleStep(1.0);
    doubleSpinBox->setValue(0.0);

    QLabel *scaleLabel = new QLabel(tr("Enter a scale factor between "
        "%1 and %2:").arg(0).arg(1000.0));
    scaleSpinBox = new QDoubleSpinBox;
    scaleSpinBox->setRange(0.0, 1000.0);
    scaleSpinBox->setSingleStep(10.0);
    scaleSpinBox->setSuffix("%");
    scaleSpinBox->setSpecialValueText(tr("No scaling"));
    scaleSpinBox->setValue(100.0);

    QLabel *priceLabel = new QLabel(tr("Enter a price between "
        "%1 and %2:").arg(0).arg(1000));
    priceSpinBox = new QDoubleSpinBox;
    priceSpinBox->setRange(0.0, 1000.0);
    priceSpinBox->setSingleStep(1.0);
    priceSpinBox->setPrefix("$");
    priceSpinBox->setValue(99.99);

    connect(precisionSpinBox, SIGNAL(valueChanged(int)),
            this, SLOT(changePrecision(int)));

    groupSeparatorSpinBox_d = new QDoubleSpinBox;
    groupSeparatorSpinBox_d->setRange(-99999999, 99999999);
    groupSeparatorSpinBox_d->setDecimals(2);
    groupSeparatorSpinBox_d->setValue(1000.00);
    groupSeparatorSpinBox_d->setGroupSeparatorShown(true);
    QCheckBox *groupSeparatorChkBox = new QCheckBox;
    groupSeparatorChkBox->setText(tr("Show group separator"));
    groupSeparatorChkBox->setChecked(true);
    connect(groupSeparatorChkBox, &QCheckBox::toggled, groupSeparatorSpinBox_d,
            &QDoubleSpinBox::setGroupSeparatorShown);

    QVBoxLayout *spinBoxLayout = new QVBoxLayout;
    spinBoxLayout->addWidget(precisionLabel);
    spinBoxLayout->addWidget(precisionSpinBox);
    spinBoxLayout->addWidget(doubleLabel);
    spinBoxLayout->addWidget(doubleSpinBox);
    spinBoxLayout->addWidget(scaleLabel);
    spinBoxLayout->addWidget(scaleSpinBox);
    spinBoxLayout->addWidget(priceLabel);
    spinBoxLayout->addWidget(priceSpinBox);
    spinBoxLayout->addWidget(groupSeparatorChkBox);
    spinBoxLayout->addWidget(groupSeparatorSpinBox_d);
    doubleSpinBoxesGroup->setLayout(spinBoxLayout);
}

void Window::changePrecision(int decimals)
{
    doubleSpinBox->setDecimals(decimals);
    scaleSpinBox->setDecimals(decimals);
    priceSpinBox->setDecimals(decimals);
}