BigDecimal

BigDecimal provides arbitrary-precision floating point decimal arithmetic.

Copyright (C) 2002 by Shigeo Kobayashi <shigeo@tinyforest.gr.jp>. You may distribute under the terms of either the GNU General Public License or the Artistic License, as specified in the README file of the BigDecimal distribution.

Documented by mathew <meta@pobox.com>.

Introduction¶ ↑

Ruby provides built-in support for arbitrary precision integer arithmetic. For example:

42**13 -> 1265437718438866624512

BigDecimal provides similar support for very large or very accurate floating point numbers.

Decimal arithmetic is also useful for general calculation, because it provides the correct answers people expect–whereas normal binary floating point arithmetic often introduces subtle errors because of the conversion between base 10 and base 2. For example, try:

sum = 0
for i in (1..10000)
  sum = sum + 0.0001
end
print sum

and contrast with the output from:

require 'bigdecimal'

sum = BigDecimal.new("0")
for i in (1..10000)
  sum = sum + BigDecimal.new("0.0001")
end
print sum

Similarly:

(BigDecimal.new(“1.2”) - BigDecimal(“1.0”)) == BigDecimal(“0.2”) -> true

(1.2 - 1.0) == 0.2 -> false

Special features of accurate decimal arithmetic¶ ↑

Because BigDecimal is more accurate than normal binary floating point arithmetic, it requires some special values.

Infinity¶ ↑

BigDecimal sometimes needs to return infinity, for example if you divide a value by zero.

::new("1.0") / ::new("0.0") -> infinity

::new("-1.0") / ::new("0.0") -> -infinity

You can represent infinite numbers to BigDecimal using the strings ‘Infinity’, ‘+Infinity’ and ‘-Infinity’ (case-sensitive)

Not a Number¶ ↑

When a computation results in an undefined value, the special value NaN (for ‘not a number’) is returned.

Example:

::new("0.0") / ::new("0.0") -> NaN

You can also create undefined values. NaN is never considered to be the same as any other value, even NaN itself:

n = ::new(‘NaN’)

n == 0.0 -> nil

n == n -> nil

Positive and negative zero¶ ↑

If a computation results in a value which is too small to be represented as a BigDecimal within the currently specified limits of precision, zero must be returned.

If the value which is too small to be represented is negative, a BigDecimal value of negative zero is returned. If the value is positive, a value of positive zero is returned.

::new("1.0") / ::new("-Infinity") -> -0.0

::new("1.0") / ::new("Infinity") -> 0.0

(See ::mode for how to specify limits of precision.)

Note that -0.0 and 0.0 are considered to be the same for the purposes of comparison.

Note also that in mathematics, there is no particular concept of negative or positive zero; true mathematical zero has no sign.

Constants

BASE: Base value used in internal calculations. On a 32 bit system, BASE is 10000, indicating that calculation is done in groups of 4 digits. (If it were larger, BASE**2 wouldn’t fit in 32 bits, so you couldn’t guarantee that two groups could always be multiplied together without overflow.)
EXCEPTION_ALL: Determines whether overflow, underflow or zero divide result in an exception being thrown. See ::mode.
EXCEPTION_INFINITY: Determines what happens when the result of a computation is infinity. See ::mode.
EXCEPTION_NaN: Determines what happens when the result of a computation is not a number (NaN). See ::mode.
EXCEPTION_OVERFLOW: Determines what happens when the result of a computation is an overflow (a result too large to be represented). See ::mode.
EXCEPTION_UNDERFLOW: Determines what happens when the result of a computation is an underflow (a result too small to be represented). See ::mode.
EXCEPTION_ZERODIVIDE: Determines what happens when a division by zero is performed. See ::mode.
INFINITY
NAN
ROUND_CEILING: Round towards +infinity. See ::mode.
ROUND_DOWN: Indicates that values should be rounded towards zero. See ::mode.
ROUND_FLOOR: Round towards -infinity. See ::mode.
ROUND_HALF_DOWN: Indicates that digits >= 6 should be rounded up, others rounded down. See ::mode.
ROUND_HALF_EVEN: Round towards the even neighbor. See ::mode.
ROUND_HALF_UP: Indicates that digits >= 5 should be rounded up, others rounded down. See ::mode.
ROUND_MODE: Determines what happens when a result must be rounded in order to fit in the appropriate number of significant digits. See ::mode.
ROUND_UP: Indicates that values should be rounded away from zero. See ::mode.
SIGN_NEGATIVE_FINITE: Indicates that a value is negative and finite. See #sign.
SIGN_NEGATIVE_INFINITE: Indicates that a value is negative and infinite. See #sign.
SIGN_NEGATIVE_ZERO: Indicates that a value is -0. See #sign.
SIGN_NaN: Indicates that a value is not a number. See #sign.
SIGN_POSITIVE_FINITE: Indicates that a value is positive and finite. See #sign.
SIGN_POSITIVE_INFINITE: Indicates that a value is positive and infinite. See #sign.
SIGN_POSITIVE_ZERO: Indicates that a value is +0. See #sign.

Public Class Methods

_load(p1) click to toggle source

Internal method used to provide marshalling support. See the Marshal module.

 
               static VALUE
BigDecimal_load(VALUE self, VALUE str)
{
    ENTER(2);
    Real *pv;
    unsigned char *pch;
    unsigned char ch;
    unsigned long m=0;

    SafeStringValue(str);
    pch = (unsigned char *)RSTRING_PTR(str);
    /* First get max prec */
    while((*pch)!=(unsigned char)'\0' && (ch=*pch++)!=(unsigned char)':') {
        if(!ISDIGIT(ch)) {
            rb_raise(rb_eTypeError, "load failed: invalid character in the marshaled string");
        }
        m = m*10 + (unsigned long)(ch-'0');
    }
    if(m>VpBaseFig()) m -= VpBaseFig();
    GUARD_OBJ(pv,VpNewRbClass(m,(char *)pch,self));
    m /= VpBaseFig();
    if(m && pv->MaxPrec>m) pv->MaxPrec = m+1;
    return ToValue(pv);
}

double_fig click to toggle source

The ::double_fig class method returns the number of digits a Float number is allowed to have. The result depends upon the CPU and OS in use.

 
               static VALUE
BigDecimal_double_fig(VALUE self)
{
    return INT2FIX(VpDblFig());
}

limit(digits) click to toggle source

Limit the number of significant digits in newly created BigDecimal numbers to the specified value. Rounding is performed as necessary, as specified by ::mode.

A limit of 0, the default, means no upper limit.

The limit specified by this method takes less priority over any limit specified to instance methods such as ceil, floor, truncate, or round.

 
               static VALUE
BigDecimal_limit(int argc, VALUE *argv, VALUE self)
{
    VALUE  nFig;
    VALUE  nCur = INT2NUM(VpGetPrecLimit());

    if(rb_scan_args(argc,argv,"01",&nFig)==1) {
        int nf;
        if(nFig==Qnil) return nCur;
        Check_Type(nFig, T_FIXNUM);
        nf = FIX2INT(nFig);
        if(nf<0) {
            rb_raise(rb_eArgError, "argument must be positive");
        }
        VpSetPrecLimit(nf);
    }
    return nCur;
}

mode(mode, value) click to toggle source

Controls handling of arithmetic exceptions and rounding. If no value is supplied, the current value is returned.

Six values of the mode parameter control the handling of arithmetic exceptions:

BigDecimal::EXCEPTION_NaN BigDecimal::EXCEPTION_INFINITY BigDecimal::EXCEPTION_UNDERFLOW BigDecimal::EXCEPTION_OVERFLOW BigDecimal::EXCEPTION_ZERODIVIDE BigDecimal::EXCEPTION_ALL

For each mode parameter above, if the value set is false, computation continues after an arithmetic exception of the appropriate type. When computation continues, results are as follows:

EXCEPTION_NaN: NaN
EXCEPTION_INFINITY: +infinity or -infinity
EXCEPTION_UNDERFLOW: 0
EXCEPTION_OVERFLOW: +infinity or -infinity
EXCEPTION_ZERODIVIDE: +infinity or -infinity

One value of the mode parameter controls the rounding of numeric values: BigDecimal::ROUND_MODE. The values it can take are:

ROUND_UP, :up: round away from zero
ROUND_DOWN, :down, :truncate: round towards zero (truncate)
ROUND_HALF_UP, :half_up, :default: round towards the nearest neighbor, unless both neighbors are equidistant, in which case round away from zero. (default)
ROUND_HALF_DOWN, :half_down: round towards the nearest neighbor, unless both neighbors are equidistant, in which case round towards zero.
ROUND_HALF_EVEN, :half_even, :banker: round towards the nearest neighbor, unless both neighbors are equidistant, in which case round towards the even neighbor (Banker’s rounding)
ROUND_CEILING, :ceiling, :ceil: round towards positive infinity (ceil)
ROUND_FLOOR, :floor: round towards negative infinity (floor)

 
               static VALUE
BigDecimal_mode(int argc, VALUE *argv, VALUE self)
{
    VALUE which;
    VALUE val;
    unsigned long f,fo;

    if(rb_scan_args(argc,argv,"11",&which,&val)==1) val = Qnil;

    Check_Type(which, T_FIXNUM);
    f = (unsigned long)FIX2INT(which);

    if(f&VP_EXCEPTION_ALL) {
        /* Exception mode setting */
        fo = VpGetException();
        if(val==Qnil) return INT2FIX(fo);
        if(val!=Qfalse && val!=Qtrue) {
            rb_raise(rb_eArgError, "second argument must be true or false");
            return Qnil; /* Not reached */
        }
        if(f&VP_EXCEPTION_INFINITY) {
            VpSetException((unsigned short)((val==Qtrue)?(fo|VP_EXCEPTION_INFINITY):
                           (fo&(~VP_EXCEPTION_INFINITY))));
        }
        fo = VpGetException();
        if(f&VP_EXCEPTION_NaN) {
            VpSetException((unsigned short)((val==Qtrue)?(fo|VP_EXCEPTION_NaN):
                           (fo&(~VP_EXCEPTION_NaN))));
        }
        fo = VpGetException();
        if(f&VP_EXCEPTION_UNDERFLOW) {
            VpSetException((unsigned short)((val==Qtrue)?(fo|VP_EXCEPTION_UNDERFLOW):
                           (fo&(~VP_EXCEPTION_UNDERFLOW))));
        }
        fo = VpGetException();
        if(f&VP_EXCEPTION_ZERODIVIDE) {
            VpSetException((unsigned short)((val==Qtrue)?(fo|VP_EXCEPTION_ZERODIVIDE):
                           (fo&(~VP_EXCEPTION_ZERODIVIDE))));
        }
        fo = VpGetException();
        return INT2FIX(fo);
    }
    if (VP_ROUND_MODE == f) {
        /* Rounding mode setting */
        unsigned short sw;
        fo = VpGetRoundMode();
        if (NIL_P(val)) return INT2FIX(fo);
        sw = check_rounding_mode(val);
        fo = VpSetRoundMode(sw);
        return INT2FIX(fo);
    }
    rb_raise(rb_eTypeError, "first argument for BigDecimal#mode invalid");
    return Qnil;
}

new(initial, digits) click to toggle source

Create a new BigDecimal object.

initial: The initial value, as an Integer, a Float, a Rational, a BigDecimal, or a String. If it is a String, spaces are ignored and unrecognized characters terminate the value.
digits: The number of significant digits, as a Fixnum. If omitted or 0, the number of significant digits is determined from the initial value.

The actual number of significant digits used in computation is usually larger than the specified number.

 
               static VALUE
BigDecimal_new(int argc, VALUE *argv, VALUE self)
{
    ENTER(5);
    Real *pv;
    size_t mf;
    VALUE  nFig;
    VALUE  iniValue;

    if (rb_scan_args(argc, argv, "11", &iniValue, &nFig) == 1) {
        mf = 0;
    }
    else {
        mf = GetPositiveInt(nFig);
    }

    switch (TYPE(iniValue)) {
      case T_DATA:
        if (is_kind_of_BigDecimal(iniValue)) {
            pv = VpDup(DATA_PTR(iniValue));
            return ToValue(pv);
        }
        break;

      case T_FIXNUM:
        /* fall through */
      case T_BIGNUM:
        return ToValue(GetVpValue(iniValue, 1));

      case T_FLOAT:
        if (mf > DBL_DIG+1) {
            rb_raise(rb_eArgError, "precision too large.");
        }
        /* fall through */
      case T_RATIONAL:
        if (NIL_P(nFig)) {
            rb_raise(rb_eArgError,
                     "can't omit precision for a %"PRIsVALUE".",
                     RB_OBJ_CLASSNAME(iniValue));
        }
        return ToValue(GetVpValueWithPrec(iniValue, mf, 1));

      case T_STRING:
        /* fall through */
      default:
        break;
    }
    SafeStringValue(iniValue);
    GUARD_OBJ(pv, VpNewRbClass(mf, RSTRING_PTR(iniValue),self));

    return ToValue(pv);
}

save_exception_mode { ... } click to toggle source

 
               static VALUE
BigDecimal_save_exception_mode(VALUE self)
{
    unsigned short const exception_mode = VpGetException();
    int state;
    VALUE ret = rb_protect(rb_yield, Qnil, &state);
    VpSetException(exception_mode);
    if (state) rb_jump_tag(state);
    return ret;
}

save_limit { ... } click to toggle source

 
               static VALUE
BigDecimal_save_limit(VALUE self)
{
    size_t const limit = VpGetPrecLimit();
    int state;
    VALUE ret = rb_protect(rb_yield, Qnil, &state);
    VpSetPrecLimit(limit);
    if (state) rb_jump_tag(state);
    return ret;
}

save_rounding_mode { ... } click to toggle source

 
               static VALUE
BigDecimal_save_rounding_mode(VALUE self)
{
    unsigned short const round_mode = VpGetRoundMode();
    int state;
    VALUE ret = rb_protect(rb_yield, Qnil, &state);
    VpSetRoundMode(round_mode);
    if (state) rb_jump_tag(state);
    return ret;
}

ver() click to toggle source

Returns the BigDecimal version number.

Ruby 1.8.0 returns 1.0.0. Ruby 1.8.1 thru 1.8.3 return 1.0.1.

 
               static VALUE
BigDecimal_version(VALUE self)
{
    /*
     * 1.0.0: Ruby 1.8.0
     * 1.0.1: Ruby 1.8.1
     * 1.1.0: Ruby 1.9.3
    */
    return rb_str_new2("1.1.0");
}

Public Instance Methods

a % b click to toggle source

Returns the modulus from dividing by b. See divmod.

 
               static VALUE
BigDecimal_mod(VALUE self, VALUE r)

mult(value, digits) click to toggle source

Multiply by the specified value.

e.g.

c = a.mult(b,n)
c = a * b

digits: If specified and less than the number of significant digits of the result, the result is rounded to that number of digits, according to ::mode.

 
               static VALUE
BigDecimal_mult(VALUE self, VALUE r)
{
    ENTER(5);
    Real *c, *a, *b;
    size_t mx;

    GUARD_OBJ(a,GetVpValue(self,1));
    if (RB_TYPE_P(r, T_FLOAT)) {
        b = GetVpValueWithPrec(r, DBL_DIG+1, 1);
    }
    else if (RB_TYPE_P(r, T_RATIONAL)) {
        b = GetVpValueWithPrec(r, a->Prec*VpBaseFig(), 1);
    }
    else {
        b = GetVpValue(r,0);
    }

    if(!b) return DoSomeOne(self,r,'*');
    SAVE(b);

    mx = a->Prec + b->Prec;
    GUARD_OBJ(c,VpCreateRbObject(mx *(VpBaseFig() + 1), "0"));
    VpMult(c, a, b);
    return ToValue(c);
}

big_decimal ** exp → big_decimal click to toggle source

It is a synonym of big_decimal.power(exp).

 
               static VALUE
BigDecimal_power_op(VALUE self, VALUE exp)
{
    return BigDecimal_power(1, &exp, self);
}

add(value, digits) click to toggle source

Add the specified value.

e.g.

c = a.add(b,n)
c = a + b

digits: If specified and less than the number of significant digits of the result, the result is rounded to that number of digits, according to ::mode.

 
               static VALUE
BigDecimal_add(VALUE self, VALUE r)
{
    ENTER(5);
    Real *c, *a, *b;
    size_t mx;

    GUARD_OBJ(a, GetVpValue(self, 1));
    if (RB_TYPE_P(r, T_FLOAT)) {
        b = GetVpValueWithPrec(r, DBL_DIG+1, 1);
    }
    else if (RB_TYPE_P(r, T_RATIONAL)) {
        b = GetVpValueWithPrec(r, a->Prec*VpBaseFig(), 1);
    }
    else {
        b = GetVpValue(r,0);
    }

    if (!b) return DoSomeOne(self,r,'+');
    SAVE(b);

    if (VpIsNaN(b)) return b->obj;
    if (VpIsNaN(a)) return a->obj;

    mx = GetAddSubPrec(a, b);
    if (mx == (size_t)-1L) {
        GUARD_OBJ(c,VpCreateRbObject(VpBaseFig() + 1, "0"));
        VpAddSub(c, a, b, 1);
    }
    else {
        GUARD_OBJ(c, VpCreateRbObject(mx * (VpBaseFig() + 1), "0"));
        if(!mx) {
            VpSetInf(c, VpGetSign(a));
        }
        else {
            VpAddSub(c, a, b, 1);
        }
    }
    return ToValue(c);
}

+@() click to toggle source

 
               static VALUE
BigDecimal_uplus(VALUE self)
{
    return self;
}

sub(value, digits) click to toggle source

Subtract the specified value.

e.g.

c = a.sub(b,n)
c = a - b

digits: If specified and less than the number of significant digits of the result, the result is rounded to that number of digits, according to ::mode.

 
               static VALUE
BigDecimal_sub(VALUE self, VALUE r)
{
    ENTER(5);
    Real *c, *a, *b;
    size_t mx;

    GUARD_OBJ(a,GetVpValue(self,1));
    if (RB_TYPE_P(r, T_FLOAT)) {
        b = GetVpValueWithPrec(r, DBL_DIG+1, 1);
    }
    else if (RB_TYPE_P(r, T_RATIONAL)) {
        b = GetVpValueWithPrec(r, a->Prec*VpBaseFig(), 1);
    }
    else {
        b = GetVpValue(r,0);
    }

    if(!b) return DoSomeOne(self,r,'-');
    SAVE(b);

    if(VpIsNaN(b)) return b->obj;
    if(VpIsNaN(a)) return a->obj;

    mx = GetAddSubPrec(a,b);
    if (mx == (size_t)-1L) {
        GUARD_OBJ(c,VpCreateRbObject(VpBaseFig() + 1, "0"));
        VpAddSub(c, a, b, -1);
    } else {
        GUARD_OBJ(c,VpCreateRbObject(mx *(VpBaseFig() + 1), "0"));
        if(!mx) {
            VpSetInf(c,VpGetSign(a));
        } else {
            VpAddSub(c, a, b, -1);
        }
    }
    return ToValue(c);
}

-@() click to toggle source

 
               static VALUE
BigDecimal_neg(VALUE self)
{
    ENTER(5);
    Real *c, *a;
    GUARD_OBJ(a,GetVpValue(self,1));
    GUARD_OBJ(c,VpCreateRbObject(a->Prec *(VpBaseFig() + 1), "0"));
    VpAsgn(c, a, -1);
    return ToValue(c);
}

div(value, digits) click to toggle source

quo(value)

Divide by the specified value.

e.g.

c = a.div(b,n)

digits: If specified and less than the number of significant digits of the result, the result is rounded to that number of digits, according to ::mode.

If digits is 0, the result is the same as the / operator. If not, the result is an integer BigDecimal, by analogy with Float#div.

The alias quo is provided since div(value, 0) is the same as computing the quotient; see divmod.

 
               static VALUE
BigDecimal_div(VALUE self, VALUE r)
/* For c = self/r: with round operation */
{
    ENTER(5);
    Real *c=NULL, *res=NULL, *div = NULL;
    r = BigDecimal_divide(&c, &res, &div, self, r);
    if(r!=(VALUE)0) return r; /* coerced by other */
    SAVE(c);SAVE(res);SAVE(div);
    /* a/b = c + r/b */
    /* c xxxxx
       r 00000yyyyy  ==> (y/b)*BASE >= HALF_BASE
     */
    /* Round */
    if(VpHasVal(div)) { /* frac[0] must be zero for NaN,INF,Zero */
        VpInternalRound(c, 0, c->frac[c->Prec-1], (BDIGIT)(VpBaseVal()*(BDIGIT_DBL)res->frac[0]/div->frac[0]));
    }
    return ToValue(c);
}

a < b click to toggle source

Returns true if a is less than b. Values may be coerced to perform the comparison (see ==, coerce).

 
               static VALUE
BigDecimal_lt(VALUE self, VALUE r)
{
    return BigDecimalCmp(self, r, '<');
}

a <= b click to toggle source

Returns true if a is less than or equal to b. Values may be coerced to perform the comparison (see ==, coerce).

 
               static VALUE
BigDecimal_le(VALUE self, VALUE r)
{
    return BigDecimalCmp(self, r, 'L');
}

<=>(p1) click to toggle source

The comparison operator. a <=> b is 0 if a == b, 1 if a > b, -1 if a < b.

 
               static VALUE
BigDecimal_comp(VALUE self, VALUE r)
{
    return BigDecimalCmp(self, r, '*');
}

==(p1) click to toggle source

Tests for value equality; returns true if the values are equal.

The == and === operators and the eql? method have the same implementation for BigDecimal.

Values may be coerced to perform the comparison:

::new('1.0') == 1.0 -> true

 
               static VALUE
BigDecimal_eq(VALUE self, VALUE r)
{
    return BigDecimalCmp(self, r, '=');
}

===(p1) click to toggle source

Tests for value equality; returns true if the values are equal.

The == and === operators and the eql? method have the same implementation for BigDecimal.

Values may be coerced to perform the comparison:

::new('1.0') == 1.0 -> true

 
               static VALUE
BigDecimal_eq(VALUE self, VALUE r)
{
    return BigDecimalCmp(self, r, '=');
}

a > b click to toggle source

Returns true if a is greater than b. Values may be coerced to perform the comparison (see ==, coerce).

 
               static VALUE
BigDecimal_gt(VALUE self, VALUE r)
{
    return BigDecimalCmp(self, r, '>');
}

a >= b click to toggle source

Returns true if a is greater than or equal to b. Values may be coerced to perform the comparison (see ==, coerce)

 
               static VALUE
BigDecimal_ge(VALUE self, VALUE r)
{
    return BigDecimalCmp(self, r, 'G');
}

_dump(p1 = v1) click to toggle source

 
               static VALUE
BigDecimal_dump(int argc, VALUE *argv, VALUE self)
{
    ENTER(5);
    Real *vp;
    char *psz;
    VALUE dummy;
    volatile VALUE dump;

    rb_scan_args(argc, argv, "01", &dummy);
    GUARD_OBJ(vp,GetVpValue(self,1));
    dump = rb_str_new(0,VpNumOfChars(vp,"E")+50);
    psz = RSTRING_PTR(dump);
    sprintf(psz, "%"PRIuSIZE":", VpMaxPrec(vp)*VpBaseFig());
    VpToString(vp, psz+strlen(psz), 0, 0);
    rb_str_resize(dump, strlen(psz));
    return dump;
}

abs() click to toggle source

Returns the absolute value.

BigDecimal(‘5’).abs -> 5

BigDecimal(‘-3’).abs -> 3

 
               static VALUE
BigDecimal_abs(VALUE self)
{
    ENTER(5);
    Real *c, *a;
    size_t mx;

    GUARD_OBJ(a,GetVpValue(self,1));
    mx = a->Prec *(VpBaseFig() + 1);
    GUARD_OBJ(c,VpCreateRbObject(mx, "0"));
    VpAsgn(c, a, 1);
    VpChangeSign(c, 1);
    return ToValue(c);
}

add(p1, p2) click to toggle source

 
               static VALUE
BigDecimal_add2(VALUE self, VALUE b, VALUE n)
{
    ENTER(2);
    Real   *cv;
    SIGNED_VALUE mx = GetPositiveInt(n);
    if (mx == 0) return BigDecimal_add(self, b);
    else {
       size_t pl = VpSetPrecLimit(0);
       VALUE   c = BigDecimal_add(self,b);
       VpSetPrecLimit(pl);
       GUARD_OBJ(cv,GetVpValue(c,1));
       VpLeftRound(cv,VpGetRoundMode(),mx);
       return ToValue(cv);
    }
}

ceil(n) click to toggle source

Return the smallest integer greater than or equal to the value, as a BigDecimal.

BigDecimal(‘3.14159’).ceil -> 4

BigDecimal(‘-9.1’).ceil -> -9

If n is specified and positive, the fractional part of the result has no more than that many digits.

If n is specified and negative, at least that many digits to the left of the decimal point will be 0 in the result.

BigDecimal(‘3.14159’).ceil(3) -> 3.142

BigDecimal(‘13345.234’).ceil(-2) -> 13400.0

 
               static VALUE
BigDecimal_ceil(int argc, VALUE *argv, VALUE self)
{
    ENTER(5);
    Real *c, *a;
    int iLoc;
    VALUE vLoc;
    size_t mx, pl = VpSetPrecLimit(0);

    if(rb_scan_args(argc,argv,"01",&vLoc)==0) {
        iLoc = 0;
    } else {
        Check_Type(vLoc, T_FIXNUM);
        iLoc = FIX2INT(vLoc);
    }

    GUARD_OBJ(a,GetVpValue(self,1));
    mx = a->Prec *(VpBaseFig() + 1);
    GUARD_OBJ(c,VpCreateRbObject(mx, "0"));
    VpSetPrecLimit(pl);
    VpActiveRound(c,a,VP_ROUND_CEIL,iLoc);
    if (argc == 0) {
        return BigDecimal_to_i(ToValue(c));
    }
    return ToValue(c);
}

coerce(p1) click to toggle source

The coerce method provides support for Ruby type coercion. It is not enabled by default.

This means that binary operations like + * / or - can often be performed on a BigDecimal and an object of another type, if the other object can be coerced into a BigDecimal value.

e.g. a = ::new(“1.0”) b = a / 2.0 -> 0.5

Note that coercing a String to a BigDecimal is not supported by default; it requires a special compile-time option when building Ruby.

 
               static VALUE
BigDecimal_coerce(VALUE self, VALUE other)
{
    ENTER(2);
    VALUE obj;
    Real *b;

    if (RB_TYPE_P(other, T_FLOAT)) {
        obj = rb_assoc_new(other, BigDecimal_to_f(self));
    }
    else {
        if (RB_TYPE_P(other, T_RATIONAL)) {
            Real* pv = DATA_PTR(self);
            GUARD_OBJ(b, GetVpValueWithPrec(other, pv->Prec*VpBaseFig(), 1));
        }
        else {
            GUARD_OBJ(b, GetVpValue(other, 1));
        }
        obj = rb_assoc_new(b->obj, self);
    }

    return obj;
}

div(p1, p2 = v2) click to toggle source

 
               static VALUE
BigDecimal_div2(int argc, VALUE *argv, VALUE self)
{
    ENTER(5);
    VALUE b,n;
    int na = rb_scan_args(argc,argv,"11",&b,&n);
    if(na==1) { /* div in Float sense */
       Real *div=NULL;
       Real *mod;
       if(BigDecimal_DoDivmod(self,b,&div,&mod)) {
          return BigDecimal_to_i(ToValue(div));
       }
       return DoSomeOne(self,b,rb_intern("div"));
    } else {    /* div in BigDecimal sense */
       SIGNED_VALUE ix = GetPositiveInt(n);
       if (ix == 0) return BigDecimal_div(self, b);
       else {
          Real *res=NULL;
          Real *av=NULL, *bv=NULL, *cv=NULL;
          size_t mx = (ix+VpBaseFig()*2);
          size_t pl = VpSetPrecLimit(0);

          GUARD_OBJ(cv,VpCreateRbObject(mx,"0"));
          GUARD_OBJ(av,GetVpValue(self,1));
          GUARD_OBJ(bv,GetVpValue(b,1));
          mx = av->Prec + bv->Prec + 2;
          if(mx <= cv->MaxPrec) mx = cv->MaxPrec+1;
          GUARD_OBJ(res,VpCreateRbObject((mx * 2  + 2)*VpBaseFig(), "#0"));
          VpDivd(cv,res,av,bv);
          VpSetPrecLimit(pl);
          VpLeftRound(cv,VpGetRoundMode(),ix);
          return ToValue(cv);
       }
    }
}

divmod(p1) click to toggle source

Divides by the specified value, and returns the quotient and modulus as BigDecimal numbers. The quotient is rounded towards negative infinity.

For example:

require ‘bigdecimal’

a = ::new(“42”) b = ::new(“9”)

q,m = a.divmod(b)

c = q * b + m

a == c -> true

The quotient q is (a/b).floor, and the modulus is the amount that must be added to q * b to get a.

 
               static VALUE
BigDecimal_divmod(VALUE self, VALUE r)
{
    ENTER(5);
    Real *div=NULL, *mod=NULL;

    if(BigDecimal_DoDivmod(self,r,&div,&mod)) {
        SAVE(div); SAVE(mod);
        return rb_assoc_new(ToValue(div), ToValue(mod));
    }
    return DoSomeOne(self,r,rb_intern("divmod"));
}

eql?(p1) click to toggle source

Tests for value equality; returns true if the values are equal.

The == and === operators and the eql? method have the same implementation for BigDecimal.

Values may be coerced to perform the comparison:

::new('1.0') == 1.0 -> true

 
               static VALUE
BigDecimal_eq(VALUE self, VALUE r)
{
    return BigDecimalCmp(self, r, '=');
}

exponent() click to toggle source

Returns the exponent of the BigDecimal number, as an Integer.

If the number can be represented as 0.xxxxxx*10**n where xxxxxx is a string of digits with no leading zeros, then n is the exponent.

 
               static VALUE
BigDecimal_exponent(VALUE self)
{
    ssize_t e = VpExponent10(GetVpValue(self, 1));
    return INT2NUM(e);
}

finite?() click to toggle source

Returns True if the value is finite (not NaN or infinite)

 
               static VALUE
BigDecimal_IsFinite(VALUE self)
{
    Real *p = GetVpValue(self,1);
    if(VpIsNaN(p)) return Qfalse;
    if(VpIsInf(p)) return Qfalse;
    return Qtrue;
}

fix() click to toggle source

Return the integer part of the number.

 
               static VALUE
BigDecimal_fix(VALUE self)
{
    ENTER(5);
    Real *c, *a;
    size_t mx;

    GUARD_OBJ(a,GetVpValue(self,1));
    mx = a->Prec *(VpBaseFig() + 1);
    GUARD_OBJ(c,VpCreateRbObject(mx, "0"));
    VpActiveRound(c,a,VP_ROUND_DOWN,0); /* 0: round off */
    return ToValue(c);
}

floor(n) click to toggle source

Return the largest integer less than or equal to the value, as a BigDecimal.

BigDecimal(‘3.14159’).floor -> 3

BigDecimal(‘-9.1’).floor -> -10

If n is specified and positive, the fractional part of the result has no more than that many digits.

If n is specified and negative, at least that many digits to the left of the decimal point will be 0 in the result.

BigDecimal(‘3.14159’).floor(3) -> 3.141

BigDecimal(‘13345.234’).floor(-2) -> 13300.0

 
               static VALUE
BigDecimal_floor(int argc, VALUE *argv, VALUE self)
{
    ENTER(5);
    Real *c, *a;
    int iLoc;
    VALUE vLoc;
    size_t mx, pl = VpSetPrecLimit(0);

    if(rb_scan_args(argc,argv,"01",&vLoc)==0) {
        iLoc = 0;
    } else {
        Check_Type(vLoc, T_FIXNUM);
        iLoc = FIX2INT(vLoc);
    }

    GUARD_OBJ(a,GetVpValue(self,1));
    mx = a->Prec *(VpBaseFig() + 1);
    GUARD_OBJ(c,VpCreateRbObject(mx, "0"));
    VpSetPrecLimit(pl);
    VpActiveRound(c,a,VP_ROUND_FLOOR,iLoc);
#ifdef BIGDECIMAL_DEBUG
    VPrint(stderr, "floor: c=%\n", c);
#endif
    if (argc == 0) {
        return BigDecimal_to_i(ToValue(c));
    }
    return ToValue(c);
}

frac() click to toggle source

Return the fractional part of the number.

 
               static VALUE
BigDecimal_frac(VALUE self)
{
    ENTER(5);
    Real *c, *a;
    size_t mx;

    GUARD_OBJ(a,GetVpValue(self,1));
    mx = a->Prec *(VpBaseFig() + 1);
    GUARD_OBJ(c,VpCreateRbObject(mx, "0"));
    VpFrac(c, a);
    return ToValue(c);
}

hash() click to toggle source

 
               static VALUE
BigDecimal_hash(VALUE self)
{
    ENTER(1);
    Real *p;
    st_index_t hash;

    GUARD_OBJ(p,GetVpValue(self,1));
    hash = (st_index_t)p->sign;
    /* hash!=2: the case for 0(1),NaN(0) or +-Infinity(3) is sign itself */
    if(hash == 2 || hash == (st_index_t)-2) {
        hash ^= rb_memhash(p->frac, sizeof(BDIGIT)*p->Prec);
        hash += p->exponent;
    }
    return INT2FIX(hash);
}

infinite?() click to toggle source

Returns nil, -1, or +1 depending on whether the value is finite, -infinity, or +infinity.

 
               static VALUE
BigDecimal_IsInfinite(VALUE self)
{
    Real *p = GetVpValue(self,1);
    if(VpIsPosInf(p)) return INT2FIX(1);
    if(VpIsNegInf(p)) return INT2FIX(-1);
    return Qnil;
}

inspect() click to toggle source

Returns debugging information about the value as a string of comma-separated values in angle brackets with a leading #:

::new("1234.5678").inspect -> "#<BigDecimal:b7ea1130,'0.12345678E4',8(12)>"

The first part is the address, the second is the value as a string, and the final part ss(mm) is the current number of significant digits and the maximum number of significant digits, respectively.

 
               static VALUE
BigDecimal_inspect(VALUE self)
{
    ENTER(5);
    Real *vp;
    volatile VALUE obj;
    size_t nc;
    char *psz, *tmp;

    GUARD_OBJ(vp,GetVpValue(self,1));
    nc = VpNumOfChars(vp,"E");
    nc +=(nc + 9) / 10;

    obj = rb_str_new(0, nc+256);
    psz = RSTRING_PTR(obj);
    sprintf(psz,"#<BigDecimal:%"PRIxVALUE",'",self);
    tmp = psz + strlen(psz);
    VpToString(vp, tmp, 10, 0);
    tmp += strlen(tmp);
    sprintf(tmp, "',%"PRIuSIZE"(%"PRIuSIZE")>", VpPrec(vp)*VpBaseFig(), VpMaxPrec(vp)*VpBaseFig());
    rb_str_resize(obj, strlen(psz));
    return obj;
}

modulo(b) click to toggle source

Returns the modulus from dividing by b. See divmod.

 
               static VALUE
BigDecimal_mod(VALUE self, VALUE r)

mult(p1, p2) click to toggle source

 
               static VALUE
BigDecimal_mult2(VALUE self, VALUE b, VALUE n)
{
    ENTER(2);
    Real *cv;
    SIGNED_VALUE mx = GetPositiveInt(n);
    if (mx == 0) return BigDecimal_mult(self, b);
    else {
       size_t pl = VpSetPrecLimit(0);
       VALUE   c = BigDecimal_mult(self,b);
       VpSetPrecLimit(pl);
       GUARD_OBJ(cv,GetVpValue(c,1));
       VpLeftRound(cv,VpGetRoundMode(),mx);
       return ToValue(cv);
    }
}

nan?() click to toggle source

Returns True if the value is Not a Number

 
               static VALUE
BigDecimal_IsNaN(VALUE self)
{
    Real *p = GetVpValue(self,1);
    if(VpIsNaN(p))  return Qtrue;
    return Qfalse;
}

nonzero?() click to toggle source

Returns self if the value is non-zero, nil otherwise.

 
               static VALUE
BigDecimal_nonzero(VALUE self)
{
    Real *a = GetVpValue(self,1);
    return VpIsZero(a) ? Qnil : self;
}

power(n) click to toggle source

power(n, prec)

Returns the value raised to the power of n. Note that n must be an Integer.

Also available as the operator **

 
               static VALUE
BigDecimal_power(int argc, VALUE*argv, VALUE self)
{
    ENTER(5);
    VALUE vexp, prec;
    Real* exp = NULL;
    Real *x, *y;
    ssize_t mp, ma, n;
    SIGNED_VALUE int_exp;
    double d;

    rb_scan_args(argc, argv, "11", &vexp, &prec);

    GUARD_OBJ(x, GetVpValue(self, 1));
    n = NIL_P(prec) ? (ssize_t)(x->Prec*VpBaseFig()) : NUM2SSIZET(prec);

    if (VpIsNaN(x)) {
        y = VpCreateRbObject(n, "0#");
        RB_GC_GUARD(y->obj);
        VpSetNaN(y);
        return ToValue(y);
    }

retry:
    switch (TYPE(vexp)) {
      case T_FIXNUM:
        break;

      case T_BIGNUM:
        break;

      case T_FLOAT:
        d = RFLOAT_VALUE(vexp);
        if (d == round(d)) {
            vexp = LL2NUM((LONG_LONG)round(d));
            goto retry;
        }
        exp = GetVpValueWithPrec(vexp, DBL_DIG+1, 1);
        break;

      case T_RATIONAL:
        if (is_zero(RRATIONAL(vexp)->num)) {
            if (is_positive(vexp)) {
                vexp = INT2FIX(0);
                goto retry;
            }
        }
        else if (is_one(RRATIONAL(vexp)->den)) {
            vexp = RRATIONAL(vexp)->num;
            goto retry;
        }
        exp = GetVpValueWithPrec(vexp, n, 1);
        break;

      case T_DATA:
        if (is_kind_of_BigDecimal(vexp)) {
            VALUE zero = INT2FIX(0);
            VALUE rounded = BigDecimal_round(1, &zero, vexp);
            if (RTEST(BigDecimal_eq(vexp, rounded))) {
                vexp = BigDecimal_to_i(vexp);
                goto retry;
            }
            exp = DATA_PTR(vexp);
            break;
        }
        /* fall through */
      default:
        rb_raise(rb_eTypeError,
                 "wrong argument type %s (expected scalar Numeric)",
                 rb_obj_classname(vexp));
    }

    if (VpIsZero(x)) {
        if (is_negative(vexp)) {
            y = VpCreateRbObject(n, "#0");
            RB_GC_GUARD(y->obj);
            if (VpGetSign(x) < 0) {
                if (is_integer(vexp)) {
                    if (is_even(vexp)) {
                        /* (-0) ** (-even_integer)  -> Infinity */
                        VpSetPosInf(y);
                    }
                    else {
                        /* (-0) ** (-odd_integer)  -> -Infinity */
                        VpSetNegInf(y);
                    }
                }
                else {
                    /* (-0) ** (-non_integer)  -> Infinity */
                    VpSetPosInf(y);
                }
            }
            else {
                /* (+0) ** (-num)  -> Infinity */
                VpSetPosInf(y);
            }
            return ToValue(y);
        }
        else if (is_zero(vexp)) {
            return ToValue(VpCreateRbObject(n, "1"));
        }
        else {
            return ToValue(VpCreateRbObject(n, "0"));
        }
    }

    if (is_zero(vexp)) {
        return ToValue(VpCreateRbObject(n, "1"));
    }
    else if (is_one(vexp)) {
        return self;
    }

    if (VpIsInf(x)) {
        if (is_negative(vexp)) {
            if (VpGetSign(x) < 0) {
                if (is_integer(vexp)) {
                    if (is_even(vexp)) {
                        /* (-Infinity) ** (-even_integer) -> +0 */
                        return ToValue(VpCreateRbObject(n, "0"));
                    }
                    else {
                        /* (-Infinity) ** (-odd_integer) -> -0 */
                        return ToValue(VpCreateRbObject(n, "-0"));
                    }
                }
                else {
                    /* (-Infinity) ** (-non_integer) -> -0 */
                    return ToValue(VpCreateRbObject(n, "-0"));
                }
            }
            else {
                return ToValue(VpCreateRbObject(n, "0"));
            }
        }
        else {
            y = VpCreateRbObject(n, "0#");
            if (VpGetSign(x) < 0) {
                if (is_integer(vexp)) {
                    if (is_even(vexp)) {
                        VpSetPosInf(y);
                    }
                    else {
                        VpSetNegInf(y);
                    }
                }
                else {
                    /* TODO: support complex */
                    rb_raise(rb_eMathDomainError,
                             "a non-integral exponent for a negative base");
                }
            }
            else {
                VpSetPosInf(y);
            }
            return ToValue(y);
        }
    }

    if (exp != NULL) {
        return rmpd_power_by_big_decimal(x, exp, n);
    }
    else if (RB_TYPE_P(vexp, T_BIGNUM)) {
        VALUE abs_value = BigDecimal_abs(self);
        if (is_one(abs_value)) {
            return ToValue(VpCreateRbObject(n, "1"));
        }
        else if (RTEST(rb_funcall(abs_value, '<', 1, INT2FIX(1)))) {
            if (is_negative(vexp)) {
                y = VpCreateRbObject(n, "0#");
                if (is_even(vexp)) {
                    VpSetInf(y, VpGetSign(x));
                }
                else {
                    VpSetInf(y, -VpGetSign(x));
                }
                return ToValue(y);
            }
            else if (VpGetSign(x) < 0 && is_even(vexp)) {
                return ToValue(VpCreateRbObject(n, "-0"));
            }
            else {
                return ToValue(VpCreateRbObject(n, "0"));
            }
        }
        else {
            if (is_positive(vexp)) {
                y = VpCreateRbObject(n, "0#");
                if (is_even(vexp)) {
                    VpSetInf(y, VpGetSign(x));
                }
                else {
                    VpSetInf(y, -VpGetSign(x));
                }
                return ToValue(y);
            }
            else if (VpGetSign(x) < 0 && is_even(vexp)) {
                return ToValue(VpCreateRbObject(n, "-0"));
            }
            else {
                return ToValue(VpCreateRbObject(n, "0"));
            }
        }
    }

    int_exp = FIX2INT(vexp);
    ma = int_exp;
    if (ma < 0)  ma = -ma;
    if (ma == 0) ma = 1;

    if (VpIsDef(x)) {
        mp = x->Prec * (VpBaseFig() + 1);
        GUARD_OBJ(y, VpCreateRbObject(mp * (ma + 1), "0"));
    }
    else {
        GUARD_OBJ(y, VpCreateRbObject(1, "0"));
    }
    VpPower(y, x, int_exp);
    return ToValue(y);
}

precs click to toggle source

Returns an Array of two Integer values.

The first value is the current number of significant digits in the BigDecimal. The second value is the maximum number of significant digits for the BigDecimal.

 
               static VALUE
BigDecimal_prec(VALUE self)
{
    ENTER(1);
    Real *p;
    VALUE obj;

    GUARD_OBJ(p,GetVpValue(self,1));
    obj = rb_assoc_new(INT2NUM(p->Prec*VpBaseFig()),
                       INT2NUM(p->MaxPrec*VpBaseFig()));
    return obj;
}

quo(value) click to toggle source

Divide by the specified value.

e.g.

c = a.div(b,n)

digits: If specified and less than the number of significant digits of the result, the result is rounded to that number of digits, according to ::mode.

If digits is 0, the result is the same as the / operator. If not, the result is an integer BigDecimal, by analogy with Float#div.

The alias quo is provided since div(value, 0) is the same as computing the quotient; see divmod.

 
               static VALUE
BigDecimal_div(VALUE self, VALUE r)
/* For c = self/r: with round operation */
{
    ENTER(5);
    Real *c=NULL, *res=NULL, *div = NULL;
    r = BigDecimal_divide(&c, &res, &div, self, r);
    if(r!=(VALUE)0) return r; /* coerced by other */
    SAVE(c);SAVE(res);SAVE(div);
    /* a/b = c + r/b */
    /* c xxxxx
       r 00000yyyyy  ==> (y/b)*BASE >= HALF_BASE
     */
    /* Round */
    if(VpHasVal(div)) { /* frac[0] must be zero for NaN,INF,Zero */
        VpInternalRound(c, 0, c->frac[c->Prec-1], (BDIGIT)(VpBaseVal()*(BDIGIT_DBL)res->frac[0]/div->frac[0]));
    }
    return ToValue(c);
}

remainder(p1) click to toggle source

Returns the remainder from dividing by the value.

x.remainder(y) means x-y*(x/y).truncate

 
               static VALUE
BigDecimal_remainder(VALUE self, VALUE r) /* remainder */
{
    VALUE  f;
    Real  *d,*rv=0;
    f = BigDecimal_divremain(self,r,&d,&rv);
    if(f!=(VALUE)0) return f;
    return ToValue(rv);
}

round(n, mode) click to toggle source

Round to the nearest 1 (by default), returning the result as a BigDecimal.

BigDecimal(‘3.14159’).round -> 3

BigDecimal(‘8.7’).round -> 9

If n is specified and positive, the fractional part of the result has no more than that many digits.

If n is specified and negative, at least that many digits to the left of the decimal point will be 0 in the result.

BigDecimal(‘3.14159’).round(3) -> 3.142

BigDecimal(‘13345.234’).round(-2) -> 13300.0

The value of the optional mode argument can be used to determine how rounding is performed; see ::mode.

 
               static VALUE
BigDecimal_round(int argc, VALUE *argv, VALUE self)
{
    ENTER(5);
    Real   *c, *a;
    int    iLoc = 0;
    VALUE  vLoc;
    VALUE  vRound;
    size_t mx, pl;

    unsigned short sw = VpGetRoundMode();

    switch (rb_scan_args(argc, argv, "02", &vLoc, &vRound)) {
    case 0:
        iLoc = 0;
        break;
    case 1:
        Check_Type(vLoc, T_FIXNUM);
        iLoc = FIX2INT(vLoc);
        break;
    case 2:
        Check_Type(vLoc, T_FIXNUM);
        iLoc = FIX2INT(vLoc);
        sw = check_rounding_mode(vRound);
        break;
    }

    pl = VpSetPrecLimit(0);
    GUARD_OBJ(a,GetVpValue(self,1));
    mx = a->Prec *(VpBaseFig() + 1);
    GUARD_OBJ(c,VpCreateRbObject(mx, "0"));
    VpSetPrecLimit(pl);
    VpActiveRound(c,a,sw,iLoc);
    if (argc == 0) {
        return BigDecimal_to_i(ToValue(c));
    }
    return ToValue(c);
}

sign() click to toggle source

Returns the sign of the value.

Returns a positive value if > 0, a negative value if < 0, and a zero if == 0.

The specific value returned indicates the type and sign of the BigDecimal, as follows:

BigDecimal::SIGN_NaN: value is Not a Number
BigDecimal::SIGN_POSITIVE_ZERO: value is +0
BigDecimal::SIGN_NEGATIVE_ZERO: value is -0
BigDecimal::SIGN_POSITIVE_INFINITE: value is +infinity
BigDecimal::SIGN_NEGATIVE_INFINITE: value is -infinity
BigDecimal::SIGN_POSITIVE_FINITE: value is positive
BigDecimal::SIGN_NEGATIVE_FINITE: value is negative

 
               static VALUE
BigDecimal_sign(VALUE self)
{ /* sign */
    int s = GetVpValue(self,1)->sign;
    return INT2FIX(s);
}

split() click to toggle source

Splits a BigDecimal number into four parts, returned as an array of values.

The first value represents the sign of the BigDecimal, and is -1 or 1, or 0 if the BigDecimal is Not a Number.

The second value is a string representing the significant digits of the BigDecimal, with no leading zeros.

The third value is the base used for arithmetic (currently always 10) as an Integer.

The fourth value is an Integer exponent.

If the BigDecimal can be represented as 0.xxxxxx*10**n, then xxxxxx is the string of significant digits with no leading zeros, and n is the exponent.

From these values, you can translate a BigDecimal to a float as follows:

sign, significant_digits, base, exponent = a.split
f = sign * "0.#{significant_digits}".to_f * (base ** exponent)

(Note that the #to_f method is provided as a more convenient way to translate a BigDecimal to a Float.)

 
               static VALUE
BigDecimal_split(VALUE self)
{
    ENTER(5);
    Real *vp;
    VALUE obj,str;
    ssize_t e, s;
    char *psz1;

    GUARD_OBJ(vp,GetVpValue(self,1));
    str = rb_str_new(0, VpNumOfChars(vp,"E"));
    psz1 = RSTRING_PTR(str);
    VpSzMantissa(vp,psz1);
    s = 1;
    if(psz1[0]=='-') {
        size_t len = strlen(psz1+1);

        memmove(psz1, psz1+1, len);
        psz1[len] = '\0';
        s = -1;
    }
    if(psz1[0]=='N') s=0; /* NaN */
    e = VpExponent10(vp);
    obj  = rb_ary_new2(4);
    rb_ary_push(obj, INT2FIX(s));
    rb_ary_push(obj, str);
    rb_str_resize(str, strlen(psz1));
    rb_ary_push(obj, INT2FIX(10));
    rb_ary_push(obj, INT2NUM(e));
    return obj;
}

sqrt(n) click to toggle source

Returns the square root of the value.

If n is specified, returns at least that many significant digits.

 
               static VALUE
BigDecimal_sqrt(VALUE self, VALUE nFig)
{
    ENTER(5);
    Real *c, *a;
    size_t mx, n;

    GUARD_OBJ(a,GetVpValue(self,1));
    mx = a->Prec *(VpBaseFig() + 1);

    n = GetPositiveInt(nFig) + VpDblFig() + 1;
    if(mx <= n) mx = n;
    GUARD_OBJ(c,VpCreateRbObject(mx, "0"));
    VpSqrt(c, a);
    return ToValue(c);
}

sub(p1, p2) click to toggle source

 
               static VALUE
BigDecimal_sub2(VALUE self, VALUE b, VALUE n)
{
    ENTER(2);
    Real *cv;
    SIGNED_VALUE mx = GetPositiveInt(n);
    if (mx == 0) return BigDecimal_sub(self, b);
    else {
       size_t pl = VpSetPrecLimit(0);
       VALUE   c = BigDecimal_sub(self,b);
       VpSetPrecLimit(pl);
       GUARD_OBJ(cv,GetVpValue(c,1));
       VpLeftRound(cv,VpGetRoundMode(),mx);
       return ToValue(cv);
    }
}

to_d → bigdecimal click to toggle source

Returns self.

 
               # File bigdecimal/lib/bigdecimal/util.rb, line 79
def to_d
  self
end

to_digits → string click to toggle source

Converts a BigDecimal to a String of the form “nnnnnn.mmm”. This method is deprecated; use #to_s(“F”) instead.

require 'bigdecimal'
require 'bigdecimal/util'

d = BigDecimal.new("3.14")
d.to_digits
# => "3.14"

 
               # File bigdecimal/lib/bigdecimal/util.rb, line 65
def to_digits
  if self.nan? || self.infinite? || self.zero?
    self.to_s
  else
    i       = self.to_i.to_s
    _,f,_,z = self.frac.split
    i + "." + ("0"*(-z)) + f
  end
end

to_f() click to toggle source

Returns a new Float object having approximately the same value as the BigDecimal number. Normal accuracy limits and built-in errors of binary Float arithmetic apply.

 
               static VALUE
BigDecimal_to_f(VALUE self)
{
    ENTER(1);
    Real *p;
    double d;
    SIGNED_VALUE e;
    char *buf;
    volatile VALUE str;

    GUARD_OBJ(p, GetVpValue(self, 1));
    if (VpVtoD(&d, &e, p) != 1)
        return rb_float_new(d);
    if (e > (SIGNED_VALUE)(DBL_MAX_10_EXP+BASE_FIG))
        goto overflow;
    if (e < (SIGNED_VALUE)(DBL_MIN_10_EXP-BASE_FIG))
        goto underflow;

    str = rb_str_new(0, VpNumOfChars(p,"E"));
    buf = RSTRING_PTR(str);
    VpToString(p, buf, 0, 0);
    errno = 0;
    d = strtod(buf, 0);
    if (errno == ERANGE)
        goto overflow;
    return rb_float_new(d);

overflow:
    VpException(VP_EXCEPTION_OVERFLOW, "BigDecimal to Float conversion", 0);
    if (d > 0.0)
        return rb_float_new(VpGetDoublePosInf());
    else
        return rb_float_new(VpGetDoubleNegInf());

underflow:
    VpException(VP_EXCEPTION_UNDERFLOW, "BigDecimal to Float conversion", 0);
    if (d > 0.0)
        return rb_float_new(0.0);
    else
        return rb_float_new(-0.0);
}

to_i() click to toggle source

Returns the value as an integer (Fixnum or Bignum).

If the BigNumber is infinity or NaN, raises FloatDomainError.

 
               static VALUE
BigDecimal_to_i(VALUE self)
{
    ENTER(5);
    ssize_t e, nf;
    Real *p;

    GUARD_OBJ(p,GetVpValue(self,1));
    BigDecimal_check_num(p);

    e = VpExponent10(p);
    if(e<=0) return INT2FIX(0);
    nf = VpBaseFig();
    if(e<=nf) {
        return LONG2NUM((long)(VpGetSign(p)*(BDIGIT_DBL_SIGNED)p->frac[0]));
    }
    else {
        VALUE a = BigDecimal_split(self);
        VALUE digits = RARRAY_PTR(a)[1];
        VALUE numerator = rb_funcall(digits, rb_intern("to_i"), 0);
        VALUE ret;
        ssize_t dpower = e - (ssize_t)RSTRING_LEN(digits);

        if (VpGetSign(p) < 0) {
            numerator = rb_funcall(numerator, '*', 1, INT2FIX(-1));
        }
        if (dpower < 0) {
            ret = rb_funcall(numerator, rb_intern("div"), 1,
                              rb_funcall(INT2FIX(10), rb_intern("**"), 1,
                                         INT2FIX(-dpower)));
        }
        else
            ret = rb_funcall(numerator, '*', 1,
                             rb_funcall(INT2FIX(10), rb_intern("**"), 1,
                                        INT2FIX(dpower)));
        if (RB_TYPE_P(ret, T_FLOAT))
            rb_raise(rb_eFloatDomainError, "Infinity");
        return ret;
    }
}

to_int() click to toggle source

Returns the value as an integer (Fixnum or Bignum).

If the BigNumber is infinity or NaN, raises FloatDomainError.

 
               static VALUE
BigDecimal_to_i(VALUE self)
{
    ENTER(5);
    ssize_t e, nf;
    Real *p;

    GUARD_OBJ(p,GetVpValue(self,1));
    BigDecimal_check_num(p);

    e = VpExponent10(p);
    if(e<=0) return INT2FIX(0);
    nf = VpBaseFig();
    if(e<=nf) {
        return LONG2NUM((long)(VpGetSign(p)*(BDIGIT_DBL_SIGNED)p->frac[0]));
    }
    else {
        VALUE a = BigDecimal_split(self);
        VALUE digits = RARRAY_PTR(a)[1];
        VALUE numerator = rb_funcall(digits, rb_intern("to_i"), 0);
        VALUE ret;
        ssize_t dpower = e - (ssize_t)RSTRING_LEN(digits);

        if (VpGetSign(p) < 0) {
            numerator = rb_funcall(numerator, '*', 1, INT2FIX(-1));
        }
        if (dpower < 0) {
            ret = rb_funcall(numerator, rb_intern("div"), 1,
                              rb_funcall(INT2FIX(10), rb_intern("**"), 1,
                                         INT2FIX(-dpower)));
        }
        else
            ret = rb_funcall(numerator, '*', 1,
                             rb_funcall(INT2FIX(10), rb_intern("**"), 1,
                                        INT2FIX(dpower)));
        if (RB_TYPE_P(ret, T_FLOAT))
            rb_raise(rb_eFloatDomainError, "Infinity");
        return ret;
    }
}

to_r() click to toggle source

Converts a BigDecimal to a Rational.

 
               static VALUE
BigDecimal_to_r(VALUE self)
{
    Real *p;
    ssize_t sign, power, denomi_power;
    VALUE a, digits, numerator;

    p = GetVpValue(self,1);
    BigDecimal_check_num(p);

    sign = VpGetSign(p);
    power = VpExponent10(p);
    a = BigDecimal_split(self);
    digits = RARRAY_PTR(a)[1];
    denomi_power = power - RSTRING_LEN(digits);
    numerator = rb_funcall(digits, rb_intern("to_i"), 0);

    if (sign < 0) {
        numerator = rb_funcall(numerator, '*', 1, INT2FIX(-1));
    }
    if (denomi_power < 0) {
        return rb_Rational(numerator,
                           rb_funcall(INT2FIX(10), rb_intern("**"), 1,
                                      INT2FIX(-denomi_power)));
    }
    else {
        return rb_Rational1(rb_funcall(numerator, '*', 1,
                                       rb_funcall(INT2FIX(10), rb_intern("**"), 1,
                                                  INT2FIX(denomi_power))));
    }
}

to_s(s) click to toggle source

Converts the value to a string.

The default format looks like 0.xxxxEnn.

The optional parameter s consists of either an integer; or an optional ‘+’ or ‘ ’, followed by an optional number, followed by an optional ‘E’ or ‘F’.

If there is a ‘+’ at the start of s, positive values are returned with a leading ‘+’.

A space at the start of s returns positive values with a leading space.

If s contains a number, a space is inserted after each group of that many fractional digits.

If s ends with an ‘E’, engineering notation (0.xxxxEnn) is used.

If s ends with an ‘F’, conventional floating point notation is used.

Examples:

::new('-123.45678901234567890').to_s('5F') -> '-123.45678 90123 45678 9'

::new('123.45678901234567890').to_s('+8F') -> '+123.45678901 23456789'

::new('123.45678901234567890').to_s(' F') -> ' 123.4567890123456789'

 
               static VALUE
BigDecimal_to_s(int argc, VALUE *argv, VALUE self)
{
    ENTER(5);
    int   fmt = 0;   /* 0:E format */
    int   fPlus = 0; /* =0:default,=1: set ' ' before digits ,set '+' before digits. */
    Real  *vp;
    volatile VALUE str;
    char  *psz;
    char   ch;
    size_t nc, mc = 0;
    VALUE  f;

    GUARD_OBJ(vp,GetVpValue(self,1));

    if (rb_scan_args(argc,argv,"01",&f)==1) {
        if (RB_TYPE_P(f, T_STRING)) {
            SafeStringValue(f);
            psz = RSTRING_PTR(f);
            if (*psz == ' ') {
                fPlus = 1;
                psz++;
            }
            else if (*psz == '+') {
                fPlus = 2;
                psz++;
            }
            while ((ch = *psz++) != 0) {
                if (ISSPACE(ch)) {
                    continue;
                }
                if (!ISDIGIT(ch)) {
                    if (ch == 'F' || ch == 'f') {
                        fmt = 1; /* F format */
                    }
                    break;
                }
                mc = mc * 10 + ch - '0';
            }
        }
        else {
            mc = (size_t)GetPositiveInt(f);
        }
    }
    if (fmt) {
        nc = VpNumOfChars(vp, "F");
    }
    else {
        nc = VpNumOfChars(vp, "E");
    }
    if (mc > 0) {
        nc += (nc + mc - 1) / mc + 1;
    }

    str = rb_str_new(0, nc);
    psz = RSTRING_PTR(str);

    if (fmt) {
        VpToFString(vp, psz, mc, fPlus);
    }
    else {
        VpToString (vp, psz, mc, fPlus);
    }
    rb_str_resize(str, strlen(psz));
    return str;
}

truncate(n) click to toggle source

Truncate to the nearest 1, returning the result as a BigDecimal.

BigDecimal(‘3.14159’).truncate -> 3

BigDecimal(‘8.7’).truncate -> 8

If n is specified and positive, the fractional part of the result has no more than that many digits.

If n is specified and negative, at least that many digits to the left of the decimal point will be 0 in the result.

BigDecimal(‘3.14159’).truncate(3) -> 3.141

BigDecimal(‘13345.234’).truncate(-2) -> 13300.0

 
               static VALUE
BigDecimal_truncate(int argc, VALUE *argv, VALUE self)
{
    ENTER(5);
    Real *c, *a;
    int iLoc;
    VALUE vLoc;
    size_t mx, pl = VpSetPrecLimit(0);

    if(rb_scan_args(argc,argv,"01",&vLoc)==0) {
        iLoc = 0;
    } else {
        Check_Type(vLoc, T_FIXNUM);
        iLoc = FIX2INT(vLoc);
    }

    GUARD_OBJ(a,GetVpValue(self,1));
    mx = a->Prec *(VpBaseFig() + 1);
    GUARD_OBJ(c,VpCreateRbObject(mx, "0"));
    VpSetPrecLimit(pl);
    VpActiveRound(c,a,VP_ROUND_DOWN,iLoc); /* 0: truncate */
    if (argc == 0) {
        return BigDecimal_to_i(ToValue(c));
    }
    return ToValue(c);
}

zero?() click to toggle source

Returns True if the value is zero.

 
               static VALUE
BigDecimal_zero(VALUE self)
{
    Real *a = GetVpValue(self,1);
    return VpIsZero(a) ? Qtrue : Qfalse;
}

Commenting is here to help enhance the documentation. For example, code samples, or clarification of the documentation.

If you have questions about Ruby or the documentation, please post to one of the Ruby mailing lists. You will get better, faster, help that way.

If you wish to post a correction of the docs, please do so, but also file bug report so that it can be corrected for the next release. Thank you.

If you want to help improve the Ruby documentation, please visit Documenting-ruby.org.

Home Classes Methods

In Files

Parent

Methods

Class/Module Index

BigDecimal

Introduction¶ ↑

Special features of accurate decimal arithmetic¶ ↑

Infinity¶ ↑

Not a Number¶ ↑

Positive and negative zero¶ ↑

Constants

Public Class Methods

Public Instance Methods