Net::POPSession

Net::POP3¶ ↑

What is This Library?¶ ↑

This library provides functionality for retrieving email via POP3, the Post Office Protocol version 3. For details of POP3, see [RFC1939] (www.ietf.org/rfc/rfc1939.txt).

Examples¶ ↑

Retrieving Messages¶ ↑

This example retrieves messages from the server and deletes them on the server.

Messages are written to files named ‘inbox/1’, ‘inbox/2’, .… Replace ‘pop.example.com’ with your POP3 server address, and ‘YourAccount’ and ‘YourPassword’ with the appropriate account details.

require 'net/pop'

pop = Net::POP3.new('pop.example.com')
pop.start('YourAccount', 'YourPassword')             # (1)
if pop.mails.empty?
  puts 'No mail.'
else
  i = 0
  pop.each_mail do |m|   # or "pop.mails.each ..."   # (2)
    File.open("inbox/#{i}", 'w') do |f|
      f.write m.pop
    end
    m.delete
    i += 1
  end
  puts "#{pop.mails.size} mails popped."
end
pop.finish                                           # (3)

Call Net::POP3#start and start POP session.
Access messages by using Net::POP3#each_mail and/or Net::POP3#mails.
Close POP session by calling Net::POP3#finish or use the block form of start.

Shortened Code¶ ↑

The example above is very verbose. You can shorten the code by using some utility methods. First, the block form of Net::POP3.start can be used instead of Net::POP3.new, Net::POP3#start and Net::POP3#finish.

require 'net/pop'

Net::POP3.start('pop.example.com', 110,
                'YourAccount', 'YourPassword') do |pop|
  if pop.mails.empty?
    puts 'No mail.'
  else
    i = 0
    pop.each_mail do |m|   # or "pop.mails.each ..."
      File.open("inbox/#{i}", 'w') do |f|
        f.write m.pop
      end
      m.delete
      i += 1
    end
    puts "#{pop.mails.size} mails popped."
  end
end

Net::POP3#delete_all is an alternative for each_mail and delete.

require 'net/pop'

Net::POP3.start('pop.example.com', 110,
                'YourAccount', 'YourPassword') do |pop|
  if pop.mails.empty?
    puts 'No mail.'
  else
    i = 1
    pop.delete_all do |m|
      File.open("inbox/#{i}", 'w') do |f|
        f.write m.pop
      end
      i += 1
    end
  end
end

And here is an even shorter example.

require 'net/pop'

i = 0
Net::POP3.delete_all('pop.example.com', 110,
                     'YourAccount', 'YourPassword') do |m|
  File.open("inbox/#{i}", 'w') do |f|
    f.write m.pop
  end
  i += 1
end

Memory Space Issues¶ ↑

All the examples above get each message as one big string. This example avoids this.

require 'net/pop'

i = 1
Net::POP3.delete_all('pop.example.com', 110,
                     'YourAccount', 'YourPassword') do |m|
  File.open("inbox/#{i}", 'w') do |f|
    m.pop do |chunk|    # get a message little by little.
      f.write chunk
    end
    i += 1
  end
end

Using APOP¶ ↑

The net/pop library supports APOP authentication. To use APOP, use the Net::APOP class instead of the Net::POP3 class. You can use the utility method, Net::POP3.APOP(). For example:

require 'net/pop'

# Use APOP authentication if $isapop == true
pop = Net::POP3.APOP($is_apop).new('apop.example.com', 110)
pop.start(YourAccount', 'YourPassword') do |pop|
  # Rest of the code is the same.
end

Fetch Only Selected Mail Using ‘UIDL’ POP Command¶ ↑

If your POP server provides UIDL functionality, you can grab only selected mails from the POP server. e.g.

def need_pop?( id )
  # determine if we need pop this mail...
end

Net::POP3.start('pop.example.com', 110,
                'Your account', 'Your password') do |pop|
  pop.mails.select { |m| need_pop?(m.unique_id) }.each do |m|
    do_something(m.pop)
  end
end

The Net::POPMail#unique_id method returns the unique-id of the message as a String. Normally the unique-id is a hash of the message.

Constants

Revision: svn revision of this library

Attributes

address[R]

The address to connect to.

open_timeout[RW]

Seconds to wait until a connection is opened. If the POP3 object cannot open a connection within this time, it raises a TimeoutError exception. The default value is 30 seconds.

read_timeout[R]

Seconds to wait until reading one block (by one read(1) call). If the POP3 object cannot complete a read() within this time, it raises a TimeoutError exception. The default value is 60 seconds.

Public Class Methods

APOP(isapop) click to toggle source

Returns the APOP class if isapop is true; otherwise, returns the POP class. For example:

# Example 1
pop = Net::POP3::APOP($is_apop).new(addr, port)

# Example 2
Net::POP3::APOP($is_apop).start(addr, port) do |pop|
  ....
end

 
               # File net/pop.rb, line 240
def POP3.APOP(isapop)
  isapop ? APOP : POP3
end

auth_only(address, port = nil, account = nil, password = nil, isapop = false) click to toggle source

Opens a POP3 session, attempts authentication, and quits.

This method raises POPAuthenticationError if authentication fails.

Example: normal POP3¶ ↑

Net::POP3.auth_only('pop.example.com', 110,
                    'YourAccount', 'YourPassword')

Example: APOP¶ ↑

Net::POP3.auth_only('pop.example.com', 110,
                    'YourAccount', 'YourPassword', true)

 
               # File net/pop.rb, line 307
def POP3.auth_only(address, port = nil,
                   account = nil, password = nil,
                   isapop = false)
  new(address, port, isapop).auth_only account, password
end

certs() click to toggle source

returns the :ca_file or :ca_path from POP3.ssh_params

 
               # File net/pop.rb, line 379
def POP3.certs
  return @ssl_params[:ca_file] || @ssl_params[:ca_path]
end

create_ssl_params(verify_or_params = {}, certs = nil) click to toggle source

Constructs proper parameters from arguments

 
               # File net/pop.rb, line 339
def POP3.create_ssl_params(verify_or_params = {}, certs = nil)
  begin
    params = verify_or_params.to_hash
  rescue NoMethodError
    params = {}
    params[:verify_mode] = verify_or_params
    if certs
      if File.file?(certs)
        params[:ca_file] = certs
      elsif File.directory?(certs)
        params[:ca_path] = certs
      end
    end
  end
  return params
end

default_pop3_port() click to toggle source

The default port for POP3 connections, port 110

 
               # File net/pop.rb, line 212
def POP3.default_pop3_port
  110
end

default_pop3s_port() click to toggle source

The default port for POP3S connections, port 995

 
               # File net/pop.rb, line 217
def POP3.default_pop3s_port
  995
end

default_port() click to toggle source

returns the port for POP3

 
               # File net/pop.rb, line 207
def POP3.default_port
  default_pop3_port()
end

delete_all(address, port = nil, account = nil, password = nil, isapop = false, &block) click to toggle source

Starts a POP3 session and deletes all messages on the server. If a block is given, each POPMail object is yielded to it before being deleted.

This method raises a POPAuthenticationError if authentication fails.

Example¶ ↑

Net::POP3.delete_all('pop.example.com', 110,
                     'YourAccount', 'YourPassword') do |m|
  file.write m.pop
end

 
               # File net/pop.rb, line 285
def POP3.delete_all(address, port = nil,
                    account = nil, password = nil,
                    isapop = false, &block)
  start(address, port, account, password, isapop) {|pop|
    pop.delete_all(&block)
  }
end

disable_ssl() click to toggle source

Disable SSL for all new instances.

 
               # File net/pop.rb, line 357
def POP3.disable_ssl
  @ssl_params = nil
end

Net::POP.enable_ssl(params = {}) click to toggle source

Enable SSL for all new instances. params is passed to OpenSSL::SSLContext#set_params.

 
               # File net/pop.rb, line 334
def POP3.enable_ssl(*args)
  @ssl_params = create_ssl_params(*args)
end

foreach(address, port = nil, account = nil, password = nil, isapop = false) click to toggle source

Starts a POP3 session and iterates over each POPMail object, yielding it to the block. This method is equivalent to:

Net::POP3.start(address, port, account, password) do |pop|
  pop.each_mail do |m|
    yield m
  end
end

This method raises a POPAuthenticationError if authentication fails.

Example¶ ↑

Net::POP3.foreach('pop.example.com', 110,
                  'YourAccount', 'YourPassword') do |m|
  file.write m.pop
  m.delete if $DELETE
end

 
               # File net/pop.rb, line 264
def POP3.foreach(address, port = nil,
                 account = nil, password = nil,
                 isapop = false, &block)  # :yields: message
  start(address, port, account, password, isapop) {|pop|
    pop.each_mail(&block)
  }
end

new(addr, port = nil, isapop = false) click to toggle source

Creates a new POP3 object.

address is the hostname or ip address of your POP3 server.

The optional port is the port to connect to.

The optional isapop specifies whether this connection is going to use APOP authentication; it defaults to false.

This method does not open the TCP connection.

 
               # File net/pop.rb, line 419
def initialize(addr, port = nil, isapop = false)
  @address = addr
  @ssl_params = POP3.ssl_params
  @port = port
  @apop = isapop

  @command = nil
  @socket = nil
  @started = false
  @open_timeout = 30
  @read_timeout = 60
  @debug_output = nil

  @mails = nil
  @n_mails = nil
  @n_bytes = nil
end

ssl_params() click to toggle source

returns the SSL Parameters

Example¶ ↑

Net::POP3.start(addr, port, account, password) do |pop|
  pop.each_mail do |m|
    file.write m.pop
    m.delete
  end
end

 
               # File net/pop.rb, line 403
def POP3.start(address, port = nil,
               account = nil, password = nil,
               isapop = false, &block)   # :yield: pop
  new(address, port, isapop).start(account, password, &block)
end

use_ssl?() click to toggle source

returns true if ::ssl_params is set

 
               # File net/pop.rb, line 369
def POP3.use_ssl?
  return !@ssl_params.nil?
end

verify() click to toggle source

returns whether verify_mode is enable from ::ssl_params

 
               # File net/pop.rb, line 374
def POP3.verify
  return @ssl_params[:verify_mode]
end

Public Instance Methods

active?() click to toggle source

Alias for: started?

apop?() click to toggle source

Does this instance use APOP authentication?

 
               # File net/pop.rb, line 438
def apop?
  @apop
end

auth_only(account, password) click to toggle source

Starts a pop3 session, attempts authentication, and quits. This method must not be called while POP3 session is opened. This method raises POPAuthenticationError if authentication fails.

 
               # File net/pop.rb, line 316
def auth_only(account, password)
  raise IOError, 'opening previously opened POP session' if started?
  start(account, password) {
    ;
  }
end

delete_all() click to toggle source

Deletes all messages on the server.

If called with a block, yields each message in turn before deleting it.

Example¶ ↑

n = 1
pop.delete_all do |m|
  File.open("inbox/#{n}") do |f|
    f.write m.pop
  end
  n += 1
end

This method raises a POPError if an error occurs.

 
               # File net/pop.rb, line 686
def delete_all # :yield: message
  mails().each do |m|
    yield m if block_given?
    m.delete unless m.deleted?
  end
end

disable_ssl() click to toggle source

Disable SSL for all new instances.

 
               # File net/pop.rb, line 465
def disable_ssl
  @ssl_params = nil
end

each() click to toggle source

Alias for: each_mail

each_mail() click to toggle source

Yields each message to the passed-in block in turn. Equivalent to:

pop3.mails.each do |popmail|
  ....
end

This method raises a POPError if an error occurs.

 
               # File net/pop.rb, line 664
def each_mail(&block)  # :yield: message
  mails().each(&block)
end

Also aliased as: each

Net::POP#enable_ssl(params = {}) click to toggle source

Enables SSL for this instance. Must be called before the connection is established to have any effect. +params+ is port to establish the SSL connection on; Defaults to 995. params (except :port) is passed to OpenSSL::SSLContext#set_params.

 
               # File net/pop.rb, line 454
def enable_ssl(verify_or_params = {}, certs = nil, port = nil)
  begin
    @ssl_params = verify_or_params.to_hash.dup
    @port = @ssl_params.delete(:port) || @port
  rescue NoMethodError
    @ssl_params = POP3.create_ssl_params(verify_or_params, certs)
    @port = port || @port
  end
end

finish() click to toggle source

Finishes a POP3 session and closes TCP connection.

 
               # File net/pop.rb, line 585
def finish
  raise IOError, 'POP session not yet started' unless started?
  do_finish
end

inspect() click to toggle source

Provide human-readable stringification of class state.

 
               # File net/pop.rb, line 470
def inspect
  "#<#{self.class} #{@address}:#{@port} open=#{@started}>"
end

logging(msg) click to toggle source

deguging output for msg

 
               # File net/pop.rb, line 711
def logging(msg)
  @debug_output << msg + "\n" if @debug_output
end

mails() click to toggle source

Returns an array of Net::POPMail objects, representing all the messages on the server. This array is renewed when the session restarts; otherwise, it is fetched from the server the first time this method is called (directly or indirectly) and cached.

This method raises a POPError if an error occurs.

 
               # File net/pop.rb, line 642
def mails
  return @mails.dup if @mails
  if n_mails() == 0
    # some popd raises error for LIST on the empty mailbox.
    @mails = []
    return []
  end

  @mails = command().list.map {|num, size|
    POPMail.new(num, size, self, command())
  }
  @mails.dup
end

n_bytes() click to toggle source

Returns the total size in bytes of all the messages on the POP server.

 
               # File net/pop.rb, line 630
def n_bytes
  return @n_bytes if @n_bytes
  @n_mails, @n_bytes = command().stat
  @n_bytes
end

n_mails() click to toggle source

Returns the number of messages on the POP server.

 
               # File net/pop.rb, line 623
def n_mails
  return @n_mails if @n_mails
  @n_mails, @n_bytes = command().stat
  @n_mails
end

port() click to toggle source

The port number to connect to.

 
               # File net/pop.rb, line 495
def port
  return @port || (use_ssl? ? POP3.default_pop3s_port : POP3.default_pop3_port)
end

read_timeout=(sec) click to toggle source

Set the read timeout.

 
               # File net/pop.rb, line 510
def read_timeout=(sec)
  @command.socket.read_timeout = sec if @command
  @read_timeout = sec
end

reset() click to toggle source

Resets the session. This clears all “deleted” marks from messages.

This method raises a POPError if an error occurs.

 
               # File net/pop.rb, line 696
def reset
  command().rset
  mails().each do |m|
    m.instance_eval {
      @deleted = false
    }
  end
end

set_debug_output(arg) click to toggle source

WARNING: This method causes a serious security hole. Use this method only for debugging.

Set an output stream for debugging.

Example¶ ↑

pop = Net::POP.new(addr, port)
pop.set_debug_output $stderr
pop.start(account, passwd) do |pop|
  ....
end

 
               # File net/pop.rb, line 487
def set_debug_output(arg)
  @debug_output = arg
end

start(account, password) click to toggle source

Starts a POP3 session.

When called with block, gives a POP3 object to the block and closes the session after block call finishes.

This method raises a POPAuthenticationError if authentication fails.

 
               # File net/pop.rb, line 528
def start(account, password) # :yield: pop
  raise IOError, 'POP session already started' if @started
  if block_given?
    begin
      do_start account, password
      return yield(self)
    ensure
      do_finish
    end
  else
    do_start account, password
    return self
  end
end

started?() click to toggle source

true if the POP3 session has started.

 
               # File net/pop.rb, line 516
def started?
  @started
end

Also aliased as: active?

use_ssl?() click to toggle source

does this instance use SSL?

 
               # File net/pop.rb, line 443
def use_ssl?
  return !@ssl_params.nil?
end

Commenting is here to help enhance the documentation. For example, code samples, or clarification of the documentation.

If you have questions about Ruby or the documentation, please post to one of the Ruby mailing lists. You will get better, faster, help that way.

If you wish to post a correction of the docs, please do so, but also file bug report so that it can be corrected for the next release. Thank you.

If you want to help improve the Ruby documentation, please visit Documenting-ruby.org.

Home Classes Methods

In Files

Parent

Methods

Class/Module Index

Net::POPSession

Net::POP3¶ ↑

What is This Library?¶ ↑

Examples¶ ↑

Retrieving Messages¶ ↑

Shortened Code¶ ↑

Memory Space Issues¶ ↑

Using APOP¶ ↑

Fetch Only Selected Mail Using ‘UIDL’ POP Command¶ ↑

Constants

Attributes

Public Class Methods

Example: normal POP3¶ ↑

Example: APOP¶ ↑

Example¶ ↑

Example¶ ↑

Example¶ ↑

Public Instance Methods

Example¶ ↑

Example¶ ↑