Class ActionController::Parameters < Object

Returns a new instance of ActionController::Parameters. Also, sets the permitted attribute to the default value of ActionController::Parameters.permit_all_parameters.

class Person < ActiveRecord::Base
end

params = ActionController::Parameters.new(name: "Francesco")
params.permitted?  # => false
Person.new(params) # => ActiveModel::ForbiddenAttributesError

ActionController::Parameters.permit_all_parameters = true

params = ActionController::Parameters.new(name: "Francesco")
params.permitted?  # => true
Person.new(params) # => #<Person id: nil, name: "Francesco">

Returns true if another Parameters object contains the same content and permitted flag.

Returns a parameter for the given key. If not found, returns nil.

params = ActionController::Parameters.new(person: { name: "Francesco" })
params[:person] # => <ActionController::Parameters {"name"=>"Francesco"} permitted: false>
params[:none]   # => nil

Assigns a value to a given key. The given key may still get filtered out when permit is called.

Returns a hash that can be used as the JSON representation for the parameters.

Attribute that keeps track of converted arrays, if any, to avoid double looping in the common use case permit + mass-assignment. Defined in a method to instantiate it only if needed.

Testing membership still loops, but it's going to be faster than our own loop that converts values. Also, we are not going to build a new array object per fetch.

Returns duplicate of object including all parameters.

Deletes a key-value pair from Parameters and returns the value. If key is not found, returns nil (or, with optional code block, yields key and returns the result). Cf. #extract!, which returns the corresponding ActionController::Parameters object.

Extracts the nested parameter from the given keys by calling dig at each step. Returns nil if any intermediate step is nil.

params = ActionController::Parameters.new(foo: { bar: { baz: 1 } })
params.dig(:foo, :bar, :baz) # => 1
params.dig(:foo, :zot, :xyz) # => nil

params2 = ActionController::Parameters.new(foo: [10, 11, 12])
params2.dig(:foo, 1) # => 11

Convert all hashes in values into parameters, then yield each pair in the same way as Hash#each_pair.

Returns true if the parameters have no key/value pairs.

Returns a new ActionController::Parameters instance that filters out the given keys.

params = ActionController::Parameters.new(a: 1, b: 2, c: 3)
params.except(:a, :b) # => <ActionController::Parameters {"c"=>3} permitted: false>
params.except(:d)     # => <ActionController::Parameters {"a"=>1, "b"=>2, "c"=>3} permitted: false>

Removes and returns the key/value pairs matching the given keys.

params = ActionController::Parameters.new(a: 1, b: 2, c: 3)
params.extract!(:a, :b) # => <ActionController::Parameters {"a"=>1, "b"=>2} permitted: false>
params                  # => <ActionController::Parameters {"c"=>3} permitted: false>

Returns a parameter for the given key. If the key can't be found, there are several options: With no other arguments, it will raise an ActionController::ParameterMissing error; if a second argument is given, then that is returned (converted to an instance of ActionController::Parameters if possible); if a block is given, then that will be run and its result returned.

params = ActionController::Parameters.new(person: { name: "Francesco" })
params.fetch(:person)               # => <ActionController::Parameters {"name"=>"Francesco"} permitted: false>
params.fetch(:none)                 # => ActionController::ParameterMissing: param is missing or the value is empty: none
params.fetch(:none, {})             # => <ActionController::Parameters {} permitted: false>
params.fetch(:none, "Francesco")    # => "Francesco"
params.fetch(:none) { "Francesco" } # => "Francesco"

Returns true if the given key is present in the parameters.

Returns true if the given value is present for some key in the parameters.

Returns true if the given key is present in the parameters.

Returns true if the given key is present in the parameters.

Returns a new array of the keys of the parameters.

Returns a new ActionController::Parameters with all keys from other_hash merged into current hash.

Returns current ActionController::Parameters instance with other_hash merged into current hash.

Returns a new ActionController::Parameters instance that includes only the given filters and sets the permitted attribute for the object to true. This is useful for limiting which attributes should be allowed for mass updating.

params = ActionController::Parameters.new(user: { name: "Francesco", age: 22, role: "admin" })
permitted = params.require(:user).permit(:name, :age)
permitted.permitted?      # => true
permitted.has_key?(:name) # => true
permitted.has_key?(:age)  # => true
permitted.has_key?(:role) # => false

Only permitted scalars pass the filter. For example, given

params.permit(:name)

:name passes if it is a key of params whose associated value is of type String, Symbol, NilClass, Numeric, TrueClass, FalseClass, Date, Time, DateTime, StringIO, IO, ActionDispatch::Http::UploadedFile or Rack::Test::UploadedFile. Otherwise, the key :name is filtered out.

You may declare that the parameter should be an array of permitted scalars by mapping it to an empty array:

params = ActionController::Parameters.new(tags: ["rails", "parameters"])
params.permit(tags: [])

Sometimes it is not possible or convenient to declare the valid keys of a hash parameter or its internal structure. Just map to an empty hash:

params.permit(preferences: {})

Be careful because this opens the door to arbitrary input. In this case, permit ensures values in the returned structure are permitted scalars and filters out anything else.

You can also use permit on nested parameters, like:

params = ActionController::Parameters.new({
  person: {
    name: "Francesco",
    age:  22,
    pets: [{
      name: "Purplish",
      category: "dogs"
    }]
  }
})

permitted = params.permit(person: [ :name, { pets: :name } ])
permitted.permitted?                    # => true
permitted[:person][:name]               # => "Francesco"
permitted[:person][:age]                # => nil
permitted[:person][:pets][0][:name]     # => "Purplish"
permitted[:person][:pets][0][:category] # => nil

Note that if you use permit in a key that points to a hash, it won't allow all the hash. You also need to specify which attributes inside the hash should be whitelisted.

params = ActionController::Parameters.new({
  person: {
    contact: {
      email: "none@test.com",
      phone: "555-1234"
    }
  }
})

params.require(:person).permit(:contact)
# => <ActionController::Parameters {} permitted: true>

params.require(:person).permit(contact: :phone)
# => <ActionController::Parameters {"contact"=><ActionController::Parameters {"phone"=>"555-1234"} permitted: true>} permitted: true>

params.require(:person).permit(contact: [ :email, :phone ])
# => <ActionController::Parameters {"contact"=><ActionController::Parameters {"email"=>"none@test.com", "phone"=>"555-1234"} permitted: true>} permitted: true>

Sets the permitted attribute to true. This can be used to pass mass assignment. Returns self.

class Person < ActiveRecord::Base
end

params = ActionController::Parameters.new(name: "Francesco")
params.permitted?  # => false
Person.new(params) # => ActiveModel::ForbiddenAttributesError
params.permit!
params.permitted?  # => true
Person.new(params) # => #<Person id: nil, name: "Francesco">

Returns true if the parameter is permitted, false otherwise.

params = ActionController::Parameters.new
params.permitted? # => false
params.permit!
params.permitted? # => true

Returns a new instance of ActionController::Parameters with items that the block evaluates to true removed.

Removes items that the block evaluates to true and returns self.

This method accepts both a single key and an array of keys.

When passed a single key, if it exists and its associated value is either present or the singleton false, returns said value:

ActionController::Parameters.new(person: { name: "Francesco" }).require(:person)
# => <ActionController::Parameters {"name"=>"Francesco"} permitted: false>

Otherwise raises ActionController::ParameterMissing:

ActionController::Parameters.new.require(:person)
# ActionController::ParameterMissing: param is missing or the value is empty: person

ActionController::Parameters.new(person: nil).require(:person)
# ActionController::ParameterMissing: param is missing or the value is empty: person

ActionController::Parameters.new(person: "\t").require(:person)
# ActionController::ParameterMissing: param is missing or the value is empty: person

ActionController::Parameters.new(person: {}).require(:person)
# ActionController::ParameterMissing: param is missing or the value is empty: person

When given an array of keys, the method tries to require each one of them in order. If it succeeds, an array with the respective return values is returned:

params = ActionController::Parameters.new(user: { ... }, profile: { ... })
user_params, profile_params = params.require([:user, :profile])

Otherwise, the method re-raises the first exception found:

params = ActionController::Parameters.new(user: {}, profile: {})
user_params, profile_params = params.require([:user, :profile])
# ActionController::ParameterMissing: param is missing or the value is empty: user

Technically this method can be used to fetch terminal values:

# CAREFUL
params = ActionController::Parameters.new(person: { name: "Finn" })
name = params.require(:person).require(:name) # CAREFUL

but take into account that at some point those ones have to be permitted:

def person_params
  params.require(:person).permit(:name).tap do |person_params|
    person_params.require(:name) # SAFER
  end
end

for example.

Alias of require.

Returns a new ActionController::Parameters with all keys from current hash merged into other_hash.

Returns current ActionController::Parameters instance with current hash merged into other_hash.

Returns a new instance of ActionController::Parameters with only items that the block evaluates to true.

Equivalent to Hash#keep_if, but returns nil if no changes were made.

Returns a new ActionController::Parameters instance that includes only the given keys. If the given keys don't exist, returns an empty hash.

params = ActionController::Parameters.new(a: 1, b: 2, c: 3)
params.slice(:a, :b) # => <ActionController::Parameters {"a"=>1, "b"=>2} permitted: false>
params.slice(:d)     # => <ActionController::Parameters {} permitted: false>

Returns current ActionController::Parameters instance which contains only the given keys.

Returns a safe ActiveSupport::HashWithIndifferentAccess representation of the parameters with all unpermitted keys removed.

params = ActionController::Parameters.new({
  name: "Senjougahara Hitagi",
  oddity: "Heavy stone crab"
})
params.to_h
# => ActionController::UnfilteredParameters: unable to convert unpermitted parameters to hash

safe_params = params.permit(:name)
safe_params.to_h # => {"name"=>"Senjougahara Hitagi"}

Returns a safe Hash representation of the parameters with all unpermitted keys removed.

params = ActionController::Parameters.new({
  name: "Senjougahara Hitagi",
  oddity: "Heavy stone crab"
})
params.to_hash
# => ActionController::UnfilteredParameters: unable to convert unpermitted parameters to hash

safe_params = params.permit(:name)
safe_params.to_hash # => {"name"=>"Senjougahara Hitagi"}

Returns a string representation of the receiver suitable for use as a URL query string:

params = ActionController::Parameters.new({
  name: "David",
  nationality: "Danish"
})
params.to_query
# => ActionController::UnfilteredParameters: unable to convert unpermitted parameters to hash

safe_params = params.permit(:name, :nationality)
safe_params.to_query
# => "name=David&nationality=Danish"

An optional namespace can be passed to enclose key names:

params = ActionController::Parameters.new({
  name: "David",
  nationality: "Danish"
})
safe_params = params.permit(:name, :nationality)
safe_params.to_query("user")
# => "user%5Bname%5D=David&user%5Bnationality%5D=Danish"

The string pairs “key=value” that conform the query string are sorted lexicographically in ascending order.

This method is also aliased as to_param.

Returns the content of the parameters as a string.

Returns an unsafe, unfiltered ActiveSupport::HashWithIndifferentAccess representation of the parameters.

params = ActionController::Parameters.new({
  name: "Senjougahara Hitagi",
  oddity: "Heavy stone crab"
})
params.to_unsafe_h
# => {"name"=>"Senjougahara Hitagi", "oddity" => "Heavy stone crab"}

Returns a new ActionController::Parameters instance with the results of running block once for every key. The values are unchanged.

Performs keys transformation and returns the altered ActionController::Parameters instance.

Returns a new ActionController::Parameters with the results of running block once for every value. The keys are unchanged.

params = ActionController::Parameters.new(a: 1, b: 2, c: 3)
params.transform_values { |x| x * 2 }
# => <ActionController::Parameters {"a"=>2, "b"=>4, "c"=>6} permitted: false>

Performs values transformation and returns the altered ActionController::Parameters instance.

Returns true if the given value is present for some key in the parameters.

Returns a new array of the values of the parameters.

Returns values that were assigned to the given keys. Note that all the Hash objects will be converted to ActionController::Parameters.