Storing Static Data in the Pillar¶

Declaring the Master Pillar¶

The Salt Master server maintains a pillar_roots setup that matches the structure of the file_roots used in the Salt file server. Like file_roots, the pillar_roots option maps environments to directories. The pillar data is then mapped to minions based on matchers in a top file which is laid out in the same way as the state top file. Salt pillars can use the same matcher types as the standard top file.

conf_master:pillar_roots is configured just like file_roots. For example:

pillar_roots:
  base:
    - /srv/pillar

This example configuration declares that the base environment will be located in the /srv/pillar directory. It must not be in a subdirectory of the state tree.

The top file used matches the name of the top file used for States, and has the same structure:

/srv/pillar/top.sls

base:
  '*':
    - packages

In the above top file, it is declared that in the base environment, the glob matching all minions will have the pillar data found in the packages pillar available to it. Assuming the pillar_roots value of /srv/pillar taken from above, the packages pillar would be located at /srv/pillar/packages.sls.

Any number of matchers can be added to the base environment. For example, here is an expanded version of the Pillar top file stated above:

/srv/pillar/top.sls:

base:
  '*':
    - packages
  'web*':
    - vim

In this expanded top file, minions that match web* will have access to the /srv/pillar/packages.sls file, as well as the /srv/pillar/vim.sls file.

Another example shows how to use other standard top matching types to deliver specific salt pillar data to minions with different properties.

Here is an example using the grains matcher to target pillars to minions by their os grain:

dev:
  'os:Debian':
    - match: grain
    - servers

Pillar definitions can also take a keyword argument ignore_missing. When the value of ignore_missing is True, all errors for missing pillar files are ignored. The default value for ignore_missing is False.

Here is an example using the ignore_missing keyword parameter to ignore errors for missing pillar files:

base:
  '*':
    - servers
    - systems
    - ignore_missing: True

Assuming that the pillar servers exists in the fileserver backend and the pillar systems doesn't, all pillar data from servers pillar is delivered to minions and no error for the missing pillar systems is noted under the key _errors in the pillar data delivered to minions.

Should the ignore_missing keyword parameter have the value False, an error for the missing pillar systems would produce the value Specified SLS 'servers' in environment 'base' is not available on the salt master under the key _errors in the pillar data delivered to minions.

/srv/pillar/packages.sls

{% if grains['os'] == 'RedHat' %}
apache: httpd
git: git
{% elif grains['os'] == 'Debian' %}
apache: apache2
git: git-core
{% endif %}

company: Foo Industries

The above pillar sets two key/value pairs. If a minion is running RedHat, then the apache key is set to httpd and the git key is set to the value of git. If the minion is running Debian, those values are changed to apache2 and git-core respectively. All minions that have this pillar targeting to them via a top file will have the key of company with a value of Foo Industries.

Consequently this data can be used from within modules, renderers, State SLS files, and more via the shared pillar dictionary:

apache:
  pkg.installed:
    - name: {{ pillar['apache'] }}

git:
  pkg.installed:
    - name: {{ pillar['git'] }}

Finally, the above states can utilize the values provided to them via Pillar. All pillar values targeted to a minion are available via the 'pillar' dictionary. As seen in the above example, Jinja substitution can then be utilized to access the keys and values in the Pillar dictionary.

Note that you cannot just list key/value-information in top.sls. Instead, target a minion to a pillar file and then list the keys and values in the pillar. Here is an example top file that illustrates this point:

base:
  '*':
     - common_pillar

And the actual pillar file at '/srv/pillar/common_pillar.sls':

foo: bar
boo: baz

{{ saltenv }}:
  '*':
     - common_pillar

Dynamic Pillar Environments¶

If environment __env__ is specified in pillar_roots, all environments that are not explicitly specified in pillar_roots will map to the directories from __env__. This allows one to use dynamic git branch based environments for state/pillar files with the same file-based pillar applying to all environments. For example:

pillar_roots:
  __env__:
    - /srv/pillar

ext_pillar:
  - git:
    - __env__ https://example.com/git-pillar.git

Pillar Namespace Flattening¶

The separate pillar SLS files all merge down into a single dictionary of key-value pairs. When the same key is defined in multiple SLS files, this can result in unexpected behavior if care is not taken to how the pillar SLS files are laid out.

For example, given a top.sls containing the following:

base:
  '*':
    - packages
    - services

with packages.sls containing:

bind: bind9

and services.sls containing:

bind: named

Then a request for the bind pillar key will only return named. The bind9 value will be lost, because services.sls was evaluated later.

It can be better to structure your pillar files with more hierarchy. For example the package.sls file could be configured like so:

packages:
  bind: bind9

This would make the packages pillar key a nested dictionary containing a bind key.

Pillar Dictionary Merging¶

If the same pillar key is defined in multiple pillar SLS files, and the keys in both files refer to nested dictionaries, then the content from these dictionaries will be recursively merged.

For example, keeping the top.sls the same, assume the following modifications to the pillar SLS files:

packages.sls:

bind:
  package-name: bind9
  version: 9.9.5

services.sls:

bind:
  port: 53
  listen-on: any

The resulting pillar dictionary will be:

$ salt-call pillar.get bind
local:
    ----------
    listen-on:
        any
    package-name:
        bind9
    port:
        53
    version:
        9.9.5

Since both pillar SLS files contained a bind key which contained a nested dictionary, the pillar dictionary's bind key contains the combined contents of both SLS files' bind keys.

Including Other Pillars¶

Pillar SLS files may include other pillar files, similar to State files. Two syntaxes are available for this purpose. The simple form simply includes the additional pillar as if it were part of the same file:

include:
  - users

The full include form allows two additional options -- passing default values to the templating engine for the included pillar file as well as an optional key under which to nest the results of the included pillar:

include:
  - users:
      defaults:
          sudo: ['bob', 'paul']
      key: users

With this form, the included file (users.sls) will be nested within the 'users' key of the compiled pillar. Additionally, the 'sudo' value will be available as a template variable to users.sls.

In-Memory Pillar Data vs. On-Demand Pillar Data¶

Since compiling pillar data is computationally expensive, the minion will maintain a copy of the pillar data in memory to avoid needing to ask the master to recompile and send it a copy of the pillar data each time pillar data is requested. This in-memory pillar data is what is returned by the pillar.item, pillar.get, and pillar.raw functions.

Also, for those writing custom execution modules, or contributing to Salt's existing execution modules, the in-memory pillar data is available as the __pillar__ dunder dictionary.

The in-memory pillar data is generated on minion start, and can be refreshed using the saltutil.refresh_pillar function:

salt '*' saltutil.refresh_pillar

This function triggers the minion to asynchronously refresh the in-memory pillar data and will always return None.

In contrast to in-memory pillar data, certain actions trigger pillar data to be compiled to ensure that the most up-to-date pillar data is available. These actions include:

• Running states

• Running pillar.items

Performing these actions will not refresh the in-memory pillar data. So, if pillar data is modified, and then states are run, the states will see the updated pillar data, but pillar.item, pillar.get, and pillar.raw will not see this data unless refreshed using saltutil.refresh_pillar.

How Pillar Environments Are Handled¶

When multiple pillar environments are used, the default behavior is for the pillar data from all environments to be merged together. The pillar dictionary will therefore contain keys from all configured environments.

The pillarenv minion config option can be used to force the minion to only consider pillar configuration from a single environment. This can be useful in cases where one needs to run states with alternate pillar data, either in a testing/QA environment or to test changes to the pillar data before pushing them live.

For example, assume that the following is set in the minion config file:

pillarenv: base

This would cause that minion to ignore all other pillar environments besides base when compiling the in-memory pillar data. Then, when running states, the pillarenv CLI argument can be used to override the minion's pillarenv config value:

salt '*' state.apply mystates pillarenv=testing

The above command will run the states with pillar data sourced exclusively from the testing environment, without modifying the in-memory pillar data.

Starting in the 2017.7.0 release, it is possible to pin the pillarenv to the effective saltenv, using the pillarenv_from_saltenv minion config option. When this is set to True, if a specific saltenv is specified when running states, the pillarenv will be the same. This essentially makes the following two commands equivalent:

salt '*' state.apply mystates saltenv=dev
salt '*' state.apply mystates saltenv=dev pillarenv=dev

However, if a pillarenv is specified, it will override this behavior. So, the following command will use the qa pillar environment but source the SLS files from the dev saltenv:

salt '*' state.apply mystates saltenv=dev pillarenv=qa

So, if a pillarenv is set in the minion config file, pillarenv_from_saltenv will be ignored, and passing a pillarenv on the CLI will temporarily override pillarenv_from_saltenv.

Viewing Pillar Data¶

To view pillar data, use the pillar execution module. This module includes several functions, each of them with their own use. These functions include:

• pillar.item - Retrieves the value of one or more keys from the in-memory pillar data.

• pillar.items - Compiles a fresh pillar dictionary and returns it, leaving the in-memory pillar data untouched. If pillar keys are passed to this function however, this function acts like pillar.item and returns their values from the in-memory pillar data.

• pillar.raw - Like pillar.items, it returns the entire pillar dictionary, but from the in-memory pillar data instead of compiling fresh pillar data.

• pillar.get - Described in detail below.

The pillar.get Function¶

The pillar.get function works much in the same way as the get method in a python dict, but with an enhancement: nested dictonaries can be traversed using a colon as a delimiter.

If a structure like this is in pillar:

foo:
  bar:
    baz: qux

Extracting it from the raw pillar in an sls formula or file template is done this way:

{{ pillar['foo']['bar']['baz'] }}

Now, with the new pillar.get function the data can be safely gathered and a default can be set, allowing the template to fall back if the value is not available:

{{ salt['pillar.get']('foo:bar:baz', 'qux') }}

This makes handling nested structures much easier.

Setting Pillar Data at the Command Line¶

Pillar data can be set at the command line like the following example:

salt '*' state.apply pillar='{"cheese": "spam"}'

This will add a pillar key of cheese with its value set to spam.

Pillar Encryption¶

Salt's renderer system can be used to decrypt pillar data. This allows for pillar items to be stored in an encrypted state, and decrypted during pillar compilation.

secrets:
  vault:
    foo: |
      -----BEGIN PGP MESSAGE-----

      hQEMAw2B674HRhwSAQgAhTrN8NizwUv/VunVrqa4/X8t6EUulrnhKcSeb8sZS4th
      W1Qz3K2NjL4lkUHCQHKZVx/VoZY7zsddBIFvvoGGfj8+2wjkEDwFmFjGE4DEsS74
      ZLRFIFJC1iB/O0AiQ+oU745skQkU6OEKxqavmKMrKo3rvJ8ZCXDC470+i2/Hqrp7
      +KWGmaDOO422JaSKRm5D9bQZr9oX7KqnrPG9I1+UbJyQSJdsdtquPWmeIpamEVHb
      VMDNQRjSezZ1yKC4kCWm3YQbBF76qTHzG1VlLF5qOzuGI9VkyvlMaLfMibriqY73
      zBbPzf6Bkp2+Y9qyzuveYMmwS4sEOuZL/PetqisWe9JGAWD/O+slQ2KRu9hNww06
      KMDPJRdyj5bRuBVE4hHkkP23KrYr7SuhW2vpe7O/MvWEJ9uDNegpMLhTWruGngJh
      iFndxegN9w==
      =bAuo
      -----END PGP MESSAGE-----
    bar: this was unencrypted already
    baz: |
      -----BEGIN PGP MESSAGE-----

      hQEMAw2B674HRhwSAQf+Ne+IfsP2IcPDrUWct8sTJrga47jQvlPCmO+7zJjOVcqz
      gLjUKvMajrbI/jorBWxyAbF+5E7WdG9WHHVnuoywsyTB9rbmzuPqYCJCe+ZVyqWf
      9qgJ+oUjcvYIFmH3h7H68ldqbxaAUkAOQbTRHdr253wwaTIC91ZeX0SCj64HfTg7
      Izwk383CRWonEktXJpientApQFSUWNeLUWagEr/YPNFA3vzpPF5/Ia9X8/z/6oO2
      q+D5W5mVsns3i2HHbg2A8Y+pm4TWnH6mTSh/gdxPqssi9qIrzGQ6H1tEoFFOEq1V
      kJBe0izlfudqMq62XswzuRB4CYT5Iqw1c97T+1RqENJCASG0Wz8AGhinTdlU5iQl
      JkLKqBxcBz4L70LYWyHhYwYROJWjHgKAywX5T67ftq0wi8APuZl9olnOkwSK+wrY
      1OZi
      =7epf
      -----END PGP MESSAGE-----
    qux:
      - foo
      - bar
      - |
        -----BEGIN PGP MESSAGE-----

        hQEMAw2B674HRhwSAQgAg1YCmokrweoOI1c9HO0BLamWBaFPTMblOaTo0WJLZoTS
        ksbQ3OJAMkrkn3BnnM/djJc5C7vNs86ZfSJ+pvE8Sp1Rhtuxh25EKMqGOn/SBedI
        gR6N5vGUNiIpG5Tf3DuYAMNFDUqw8uY0MyDJI+ZW3o3xrMUABzTH0ew+Piz85FDA
        YrVgwZfqyL+9OQuu6T66jOIdwQNRX2NPFZqvon8liZUPus5VzD8E5cAL9OPxQ3sF
        f7/zE91YIXUTimrv3L7eCgU1dSxKhhfvA2bEUi+AskMWFXFuETYVrIhFJAKnkFmE
        uZx+O9R9hADW3hM5hWHKH9/CRtb0/cC84I9oCWIQPdI+AaPtICxtsD2N8Q98hhhd
        4M7I0sLZhV+4ZJqzpUsOnSpaGyfh1Zy/1d3ijJi99/l+uVHuvmMllsNmgR+ZTj0=
        =LrCQ
        -----END PGP MESSAGE-----

# salt myminion pillar.items
myminion:
    ----------
    secrets:
        ----------
        vault:
            ----------
            bar:
                this was unencrypted already
            baz:
                rosebud
            foo:
                supersecret
            qux:
                - foo
                - bar
                - baz

decrypt_pillar:
  - 'secrets:vault': gpg

decrypt_pillar:
  - 'secrets|vault': gpg

decrypt_pillar_delimiter: '|'

decrypt_pillar:
  - 'secrets:vault'

Binary Data in the Pillar¶

Salt has partial support for binary pillar data.

The simplest way to embed binary data in your pillar is to make use of YAML's built-in binary data type, which requires base64 encoded data.

salt_pic: !!binary
    iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAMAAAC67D+PAAAABGdBTUEAALGPC/xhBQAAACBjSFJNAA

Then you can use it as a contents_pillar in a state:

/tmp/salt.png:
  file.managed:
    - contents_pillar: salt_pic

It is also possible to add ASCII-armored encrypted data to pillars, as mentioned in the Pillar Encryption section.

Master Config in Pillar¶

For convenience the data stored in the master configuration file can be made available in all minion's pillars. This makes global configuration of services and systems very easy but may not be desired if sensitive data is stored in the master configuration. This option is disabled by default.

To enable the master config from being added to the pillar set pillar_opts to True in the minion config file:

pillar_opts: True

Minion Config in Pillar¶

Minion configuration options can be set on pillars. Any option that you want to modify, should be in the first level of the pillars, in the same way you set the options in the config file. For example, to configure the MySQL root password to be used by MySQL Salt execution module, set the following pillar variable:

mysql.pass: hardtoguesspassword

Master Provided Pillar Error¶

By default if there is an error rendering a pillar, the detailed error is hidden and replaced with:

Rendering SLS 'my.sls' failed. Please see master log for details.

The error is protected because it's possible to contain templating data which would give that minion information it shouldn't know, like a password!

To have the master provide the detailed error that could potentially carry protected data set pillar_safe_render_error to False:

pillar_safe_render_error: False