Mobile Device Input

On mobile devices, the Input class offers access to touchscreen, accelerometer and geographical/location input.

Access to keyboard on mobile devices is provided via the iOS keyboard.

Multi-Touch Screen

The iPhone and iPod Touch devices are capable of tracking up to five fingers touching the screen simultaneously. You can retrieve the status of each finger touching the screen during the last frame by accessing the Input.touches property array.

Android devices don’t have a unified limit on how many fingers they track. Instead, it varies from device to device and can be anything from two-touch on older devices to five fingers on some newer devices.

Each finger touch is represented by an Input.Touch data structure:

Phase can be one of the following:

Following is an example script which will shoot a ray whenever the user taps on the screen:

var particle : GameObject;
function Update () {
    for (var touch : Touch in Input.touches) {
        if (touch.phase == TouchPhase.Began) {
            // Construct a ray from the current touch coordinates
            var ray = Camera.main.ScreenPointToRay (touch.position);
            if (Physics.Raycast (ray)) {
                // Create a particle if hit
                Instantiate (particle, transform.position, transform.rotation);
            }
        }
    }
}

Mouse Simulation

On top of native touch support Unity iOSApple’s mobile operating system. More info
See in Glossary/Android provides a mouse simulation. You can use mouse functionality from the standard Input class. Note that iOS/Android devices are designed to support multiple finger touch. Using the mouse functionality will support just a single finger touch. Also, finger touch on mobile devices can move from one area to another with no movement between them. Mouse simulation on mobile devices will provide movement, so is very different compared to touch input. The recommendation is to use the mouse simulation during early development but to use touch input as soon as possible.

Accelerometer

As the mobile device moves, a built-in accelerometer reports linear acceleration changes along the three primary axes in three-dimensional space. Acceleration along each axis is reported directly by the hardware as G-force values. A value of 1.0 represents a load of about +1g along a given axis while a value of –1.0 represents –1g. If you hold the device upright (with the home button at the bottom) in front of you, the X axis is positive along the right, the Y axis is positive directly up, and the Z axis is positive pointing toward you.

You can retrieve the accelerometer value by accessing the Input.acceleration property.

The following is an example script which will move an object using the accelerometer:

var speed = 10.0;
function Update () {
    var dir : Vector3 = Vector3.zero;

    // we assume that the device is held parallel to the ground
    // and the Home button is in the right hand

    // remap the device acceleration axis to game coordinates:
    // 1) XY plane of the device is mapped onto XZ plane
    // 2) rotated 90 degrees around Y axis
    dir.x = -Input.acceleration.y;
    dir.z = Input.acceleration.x;

    // clamp acceleration vector to the unit sphere
    if (dir.sqrMagnitude > 1)
        dir.Normalize();

    // Make it move 10 meters per second instead of 10 meters per frame...
    dir *= Time.deltaTime;

    // Move object
    transform.Translate (dir * speed);
}

Low-Pass Filter

Accelerometer readings can be jerky and noisy. Applying low-pass filtering on the signal allows you to smooth it and get rid of high frequency noise.

The following script shows you how to apply low-pass filtering to accelerometer readings:

var AccelerometerUpdateInterval : float = 1.0 / 60.0;
var LowPassKernelWidthInSeconds : float = 1.0;

private var LowPassFilterFactor : float = AccelerometerUpdateInterval / LowPassKernelWidthInSeconds; // tweakable
private var lowPassValue : Vector3 = Vector3.zero;
function Start () {
    lowPassValue = Input.acceleration;
}

function LowPassFilterAccelerometer() : Vector3 {
    lowPassValue = Vector3.Lerp(lowPassValue, Input.acceleration, LowPassFilterFactor);
    return lowPassValue;
}

The greater the value of LowPassKernelWidthInSeconds, the slower the filtered value will converge towards the current input sample (and vice versa).

I’d like as much precision as possible when reading the accelerometer. What should I do?

Reading the Input.acceleration variable does not equal sampling the hardware. Put simply, Unity samples the hardware at a frequency of 60Hz and stores the result into the variable. In reality, things are a little bit more complicated – accelerometer sampling doesn’t occur at consistent time intervals, if under significant CPU loads. As a result, the system might report 2 samples during one frame, then 1 sample during the next frame.

You can access all measurements executed by accelerometer during the frame. The following code will illustrate a simple average of all the accelerometer events that were collected within the last frame:

var period : float = 0.0;
var acc : Vector3 = Vector3.zero;
for (var evnt : iPhoneAccelerationEvent in iPhoneInput.accelerationEvents) {
    acc += evnt.acceleration * evnt.deltaTime;
    period += evnt.deltaTime;
}
if (period > 0)
    acc *= 1.0/period;
return acc;