9 followers

Installing Yii

You can install Yii in two ways, using the Composer package manager or by downloading an archive file. The former is the preferred way, as it allows you to install new extensions or update Yii by simply running a single command.

Standard installations of Yii result in both the framework and a project template being downloaded and installed. A project template is a working Yii project implementing some basic features, such as login, contact form, etc. Its code is organized in a recommended way. Therefore, it can serve as a good starting point for your projects.

In this and the next few sections, we will describe how to install Yii with the so-called Basic Project Template and how to implement new features on top of this template. Yii also provides another template called the Advanced Project Template which is better used in a team development environment to develop applications with multiple tiers.

Info: The Basic Project Template is suitable for developing 90 percent of Web applications. It differs from the Advanced Project Template mainly in how their code is organized. If you are new to Yii, we strongly recommend you stick to the Basic Project Template for its simplicity yet sufficient functionalities.

Installing via Composer

Installing Composer

If you do not already have Composer installed, you may do so by following the instructions at getcomposer.org. On Linux and Mac OS X, you'll run the following commands:

curl -sS https://getcomposer.org/installer | php
sudo mv composer.phar /usr/local/bin/composer

On Windows, you'll download and run Composer-Setup.exe.

Please refer to the Troubleshooting section of the Composer Documentation if you encounter any problems. If you are new to Composer, we also recommend to read at least the Basic usage section of the Composer documentation.

In this guide all composer commands assume you have installed composer globally so that it is available as the composer command. If you are using the composer.phar in the local directory instead, you have to adjust the example commands accordingly.

If you had Composer already installed before, make sure you use an up to date version. You can update Composer by running composer self-update.

Note: During the installation of Yii, Composer will need to request a lot of information from the Github API. The number of requests depends on the number of dependencies your application has and may be bigger than the Github API rate limit. If you hit this limit, Composer may ask for your Github login credentials to obtain a Github API access token. On fast connections you may hit this limit earlier than Composer can handle so we recommend to configure the access token before installing Yii. Please refer to the Composer documentation about Github API tokens for instructions on how to do this.

Installing Yii

With Composer installed, you can install Yii application template by running the following command under a Web-accessible folder:

composer create-project --prefer-dist yiisoft/yii2-app-basic basic

This will install the latest stable version of Yii application template in a directory named basic. You can choose a different directory name if you want.

Info: If the composer create-project command fails you may also refer to the Troubleshooting section of the Composer Documentation for common errors. When you have fixed the error, you can resume the aborted installation by running composer update inside of the basic directory.

Tip: If you want to install the latest development version of Yii, you may use the following command instead, which adds a stability option:

composer create-project --prefer-dist --stability=dev yiisoft/yii2-app-basic basic

Note that the development version of Yii should not be used for production as it may break your running code.

Installing from an Archive File

Installing Yii from an archive file involves three steps:

  1. Download the archive file from yiiframework.com.
  2. Unpack the downloaded file to a Web-accessible folder.
  3. Modify the config/web.php file by entering a secret key for the cookieValidationKey configuration item (this is done automatically if you are installing Yii using Composer):

    // !!! insert a secret key in the following (if it is empty) - this is required by cookie validation
    'cookieValidationKey' => 'enter your secret key here',
    

Other Installation Options

The above installation instructions show how to install Yii, which also creates a basic Web application that works out of the box. This approach is a good starting point for most projects, either small or big. It is especially suitable if you just start learning Yii.

But there are other installation options available:

  • If you only want to install the core framework and would like to build an entire application from scratch, you may follow the instructions as explained in Building Application from Scratch.
  • If you want to start with a more sophisticated application, better suited to team development environments, you may consider installing the Advanced Project Template.

Installing Assets

Yii relies on Bower and/or NPM packages for the asset (CSS and JavaScript) libraries installation. It uses Composer to obtain these libraries, allowing PHP and CSS/JavaScript package versions to resolve at the same time. This can be achieved either by usage of asset-packagist.org or composer asset plugin. Please refer to Assets documentation for more details.

You may want to either manage your assets via native Bower/NPM client, use CDN or avoid assets installation entirely. In order to prevent assets installation via Composer, add the following lines to your 'composer.json':

"replace": {
    "bower-asset/jquery": ">=1.11.0",
    "bower-asset/inputmask": ">=3.2.0",
    "bower-asset/punycode": ">=1.3.0",
    "bower-asset/yii2-pjax": ">=2.0.0"
},

Note: in case of bypassing asset installation via Composer, you are responsible for the assets installation and resolving version collisions. Be prepared for possible inconsistencies among asset files from different extensions.

Verifying the Installation

After installation is done, either configure your web server (see next section) or use the built-in PHP web server by running the following console command while in the project web directory:

php yii serve

Note: By default the HTTP-server will listen to port 8080. However if that port is already in use or you wish to serve multiple applications this way, you might want to specify what port to use. Just add the --port argument:

php yii serve --port=8888

You can use your browser to access the installed Yii application with the following URL:

http://localhost:8080/

Successful Installation of Yii

You should see the above "Congratulations!" page in your browser. If not, please check if your PHP installation satisfies Yii's requirements. You can check if the minimum requirements are met using one of the following approaches:

  • Copy /requirements.php to /web/requirements.php and then use a browser to access it via http://localhost/requirements.php
  • Run the following commands:

    cd basic
    php requirements.php
    

You should configure your PHP installation so that it meets the minimum requirements of Yii. Most importantly, you should have PHP 5.4 or above. Ideally latest PHP 7. You should also install the PDO PHP Extension and a corresponding database driver (such as pdo_mysql for MySQL databases), if your application needs a database.

Configuring Web Servers

Info: You may skip this subsection for now if you are just test driving Yii with no intention of deploying it to a production server.

The application installed according to the above instructions should work out of box with either an Apache HTTP server or an Nginx HTTP server, on Windows, Mac OS X, or Linux running PHP 5.4 or higher. Yii 2.0 is also compatible with facebook's HHVM. However, there are some edge cases where HHVM behaves different than native PHP, so you have to take some extra care when using HHVM.

On a production server, you may want to configure your Web server so that the application can be accessed via the URL http://www.example.com/index.php instead of http://www.example.com/basic/web/index.php. Such configuration requires pointing the document root of your Web server to the basic/web folder. You may also want to hide index.php from the URL, as described in the Routing and URL Creation section. In this subsection, you'll learn how to configure your Apache or Nginx server to achieve these goals.

Info: By setting basic/web as the document root, you also prevent end users from accessing your private application code and sensitive data files that are stored in the sibling directories of basic/web. Denying access to those other folders is a security improvement.

Info: If your application will run in a shared hosting environment where you do not have permission to modify its Web server configuration, you may still adjust the structure of your application for better security. Please refer to the Shared Hosting Environment section for more details.

Info: If you are running your Yii application behind a reverse proxy, you might need to configure Trusted proxies and headers in the request component.

Use the following configuration in Apache's httpd.conf file or within a virtual host configuration. Note that you should replace path/to/basic/web with the actual path for basic/web.

# Set document root to be "basic/web"
DocumentRoot "path/to/basic/web"

<Directory "path/to/basic/web">
    # use mod_rewrite for pretty URL support
    RewriteEngine on
    
    # if $showScriptName is false in UrlManager, do not allow accessing URLs with script name
    RewriteRule ^index.php/ - [L,R=404]
    
    # If a directory or a file exists, use the request directly
    RewriteCond %{REQUEST_FILENAME} !-f
    RewriteCond %{REQUEST_FILENAME} !-d
    
    # Otherwise forward the request to index.php
    RewriteRule . index.php

    # ...other settings...
</Directory>

To use Nginx, you should install PHP as an FPM SAPI. You may use the following Nginx configuration, replacing path/to/basic/web with the actual path for basic/web and mysite.test with the actual hostname to serve.

server {
    charset utf-8;
    client_max_body_size 128M;

    listen 80; ## listen for ipv4
    #listen [::]:80 default_server ipv6only=on; ## listen for ipv6

    server_name mysite.test;
    root        /path/to/basic/web;
    index       index.php;

    access_log  /path/to/basic/log/access.log;
    error_log   /path/to/basic/log/error.log;

    location / {
        # Redirect everything that isn't a real file to index.php
        try_files $uri $uri/ /index.php$is_args$args;
    }

    # uncomment to avoid processing of calls to non-existing static files by Yii
    #location ~ \.(js|css|png|jpg|gif|swf|ico|pdf|mov|fla|zip|rar)$ {
    #    try_files $uri =404;
    #}
    #error_page 404 /404.html;

    # deny accessing php files for the /assets directory
    location ~ ^/assets/.*\.php$ {
        deny all;
    }

    location ~ \.php$ {
        include fastcgi_params;
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        fastcgi_pass 127.0.0.1:9000;
        #fastcgi_pass unix:/var/run/php5-fpm.sock;
        try_files $uri =404;
    }

    location ~* /\. {
        deny all;
    }
}

When using this configuration, you should also set cgi.fix_pathinfo=0 in the php.ini file in order to avoid many unnecessary system stat() calls.

Also note that when running an HTTPS server, you need to add fastcgi_param HTTPS on; so that Yii can properly detect if a connection is secure.

Found a typo or you think this page needs improvement?
Edit it on github !