WaveNetDeviceExample Class Reference

This simulation is to show the routing service of WaveNetDevice described in IEEE 09.4. More...

Public Member Functions
void	SendIpExample (void)
	Send IP example function. More...
void	SendWsaExample (void)
	Send WSA example. More...
void	SendWsmpExample (void)
	Send WSMP example function. More...

Private Member Functions
void	CreateWaveNodes (void)
	Create WAVE nodes function. More...
bool	Receive (Ptr< NetDevice > dev, Ptr< const Packet > pkt, uint16_t mode, const Address &sender)
	Receive function. More...
bool	ReceiveVsa (Ptr< const Packet > pkt, const Address &address, uint32_t, uint32_t)
	Receive VSA function. More...
void	SendIpPacket (uint32_t seq, bool ipv6)
	Send IP packet function. More...
void	SendOneWsmpPacket (uint32_t channel, uint32_t seq)
	Send one WSMP packet function. More...

Private Attributes
NetDeviceContainer	devices
	the devices More...
NodeContainer	nodes
	the nodes More...

Detailed Description

This simulation is to show the routing service of WaveNetDevice described in IEEE 09.4.

note: although txPowerLevel is supported now, the "TxPowerLevels" attribute of YansWifiPhy is 1 which means phy devices only support 1 levels. Thus, if users want to control txPowerLevel, they should set these attributes of YansWifiPhy by themselves..

Definition at line 40 of file wave-simple-device.cc.

Member Function Documentation

CreateWaveNodes()

void WaveNetDeviceExample::CreateWaveNodes ( void  )

private

Create WAVE nodes function.

Definition at line 88 of file wave-simple-device.cc.

References ns3::ListPositionAllocator::Add(), ns3::YansWifiChannelHelper::Create(), ns3::YansWavePhyHelper::Default(), ns3::YansWifiChannelHelper::Default(), ns3::QosWaveMacHelper::Default(), ns3::WaveHelper::Default(), first::devices, ns3::WifiPhyHelper::DLT_IEEE802_11, ns3::PcapHelperForDevice::EnablePcap(), ns3::WaveHelper::Install(), ns3::MakeCallback(), third::mobility, first::nodes, Receive(), ReceiveVsa(), ns3::YansWifiPhyHelper::SetChannel(), ns3::WifiPhyHelper::SetPcapDataLinkType(), ns3::WaveNetDevice::SetReceiveCallback(), and ns3::WaveNetDevice::SetWaveVsaCallback().

Receive()

bool WaveNetDeviceExample::Receive ( Ptr< NetDevice >  dev, Ptr< const Packet >  pkt, uint16_t  mode, const Address &  sender  )

private

Receive function.

Parameters

dev	the device
pkt	the packet
mode	the mode
sender	the sender address

Returns

true if successful

Definition at line 121 of file wave-simple-device.cc.

References ns3::Time::GetSeconds(), ns3::SeqTsHeader::GetSeq(), ns3::SeqTsHeader::GetTs(), ns3::Now(), and ns3::Packet::PeekHeader().

Referenced by CreateWaveNodes().

ReceiveVsa()

bool WaveNetDeviceExample::ReceiveVsa ( Ptr< const Packet >  pkt, const Address &  address, uint32_t  , uint32_t    )

private

Receive VSA function.

Parameters

pkt	the packet
address	the address

Returns

true if successful

Definition at line 239 of file wave-simple-device.cc.

References ns3::Time::GetSeconds(), and ns3::Now().

Referenced by CreateWaveNodes().

SendIpExample()

void WaveNetDeviceExample::SendIpExample

(

void

)

Send IP example function.

Definition at line 202 of file wave-simple-device.cc.

References ns3::WaveNetDevice::DeleteTxProfile(), ns3::Simulator::Destroy(), first::devices, EXTENDED_ALTERNATING, ns3::WaveNetDevice::RegisterTxProfile(), ns3::Simulator::Run(), SCH1, ns3::Simulator::Schedule(), ns3::Seconds(), SendIpPacket(), ns3::WaveNetDevice::StartSch(), ns3::Simulator::Stop(), and ns3::WaveNetDevice::StopSch().

SendIpPacket()

void WaveNetDeviceExample::SendIpPacket ( uint32_t  seq, bool  ipv6  )

private

Send IP packet function.

Parameters

seq	the sequence
ipv6	true if IPV6

Definition at line 185 of file wave-simple-device.cc.

References ns3::Packet::AddHeader(), first::devices, ns3::WaveNetDevice::Send(), and ns3::SeqTsHeader::SetSeq().

Referenced by SendIpExample().

SendOneWsmpPacket()

void WaveNetDeviceExample::SendOneWsmpPacket ( uint32_t  channel, uint32_t  seq  )

private

Send one WSMP packet function.

Parameters

channel	the channel to use
seq	the sequence

Definition at line 134 of file wave-simple-device.cc.

References ns3::Packet::AddHeader(), third::channel, first::devices, ns3::Mac48Address::GetBroadcast(), ns3::WaveNetDevice::SendX(), and ns3::SeqTsHeader::SetSeq().

Referenced by SendWsmpExample().

SendWsaExample()

void WaveNetDeviceExample::SendWsaExample

(

void

)

Send WSA example.

Definition at line 246 of file wave-simple-device.cc.

References ns3::Simulator::Destroy(), first::devices, EXTENDED_ALTERNATING, ns3::Mac48Address::GetBroadcast(), ns3::Simulator::Run(), SCH1, ns3::Simulator::Schedule(), ns3::Seconds(), ns3::WaveNetDevice::StartSch(), ns3::WaveNetDevice::StartVsa(), ns3::Simulator::Stop(), ns3::WaveNetDevice::StopSch(), ns3::WaveNetDevice::StopVsa(), and ns3::VSA_TRANSMIT_IN_BOTHI.

SendWsmpExample()

void WaveNetDeviceExample::SendWsmpExample

(

void

)

Send WSMP example function.

Definition at line 150 of file wave-simple-device.cc.

References CCH, ns3::Simulator::Destroy(), first::devices, EXTENDED_ALTERNATING, ns3::Simulator::Run(), SCH1, SCH2, ns3::Simulator::Schedule(), ns3::Seconds(), SendOneWsmpPacket(), ns3::WaveNetDevice::StartSch(), ns3::Simulator::Stop(), and ns3::WaveNetDevice::StopSch().

Member Data Documentation

devices

NetDeviceContainer WaveNetDeviceExample::devices

private

the devices

Definition at line 85 of file wave-simple-device.cc.

nodes

NodeContainer WaveNetDeviceExample::nodes

private

the nodes

Definition at line 84 of file wave-simple-device.cc.

---

The documentation for this class was generated from the following file:

• src/wave/examples/wave-simple-device.cc