Introspection did not find any typical Config paths. More...

#include "epc-x2-header.h"

Inheritance diagram for ns3::EpcX2Header:

Public Types
enum	ProcedureCode_t { HandoverPreparation = 0, LoadIndication = 2, SnStatusTransfer = 4, UeContextRelease = 5, ResourceStatusReporting = 10 }
	Procedure code enumeration. More...

enum	TypeOfMessage_t { InitiatingMessage = 0, SuccessfulOutcome = 1, UnsuccessfulOutcome = 2 }
	Type of message enumeration. More...

Public Member Functions
	EpcX2Header ()

virtual	~EpcX2Header ()

virtual uint32_t	Deserialize (Buffer::Iterator start)

virtual TypeId	GetInstanceTypeId (void) const
	Get the most derived TypeId for this Object. More...

uint8_t	GetMessageType () const
	Get message type function. More...

uint8_t	GetProcedureCode () const
	Get procedure code function. More...

virtual uint32_t	GetSerializedSize (void) const

virtual void	Print (std::ostream &os) const

virtual void	Serialize (Buffer::Iterator start) const

void	SetLengthOfIes (uint32_t lengthOfIes)
	Set length of IEs function. More...

void	SetMessageType (uint8_t messageType)
	Set message type function. More...

void	SetNumberOfIes (uint32_t numberOfIes)
	Set number of IEs function. More...

void	SetProcedureCode (uint8_t procedureCode)
	Set procedure code function. More...

Public Member Functions inherited from ns3::Header
virtual	~Header ()

virtual uint32_t	Deserialize (Buffer::Iterator start, Buffer::Iterator end)
	Deserialize the object from a buffer iterator. More...

virtual uint32_t	Deserialize (Buffer::Iterator start)=0
	Deserialize the object from a buffer iterator. More...

Public Member Functions inherited from ns3::Chunk
virtual uint32_t	Deserialize (Buffer::Iterator start, Buffer::Iterator end)
	Deserialize the object from a buffer iterator. More...

Public Member Functions inherited from ns3::ObjectBase
virtual	~ObjectBase ()
	Virtual destructor. More...

void	GetAttribute (std::string name, AttributeValue &value) const
	Get the value of an attribute, raising fatal errors if unsuccessful. More...

bool	GetAttributeFailSafe (std::string name, AttributeValue &value) const
	Get the value of an attribute without raising erros. More...

void	SetAttribute (std::string name, const AttributeValue &value)
	Set a single attribute, raising fatal errors if unsuccessful. More...

bool	SetAttributeFailSafe (std::string name, const AttributeValue &value)
	Set a single attribute without raising errors. More...

bool	TraceConnect (std::string name, std::string context, const CallbackBase &cb)
	Connect a TraceSource to a Callback with a context. More...

bool	TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
	Connect a TraceSource to a Callback without a context. More...

bool	TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected with a context. More...

bool	TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected without a context. More...

Static Public Member Functions
static TypeId	GetTypeId (void)
	Get the type ID. More...

Static Public Member Functions inherited from ns3::Header
static TypeId	GetTypeId (void)
	Get the type ID. More...

Static Public Member Functions inherited from ns3::Chunk
static TypeId	GetTypeId (void)
	Get the type ID. More...

Static Public Member Functions inherited from ns3::ObjectBase
static TypeId	GetTypeId (void)
	Get the type ID. More...

Private Attributes
uint32_t	m_lengthOfIes
	length of IEs More...

uint8_t	m_messageType
	message type More...

uint32_t	m_numberOfIes
	number of IEs More...

uint8_t	m_procedureCode
	procedure code More...

Additional Inherited Members
Protected Member Functions inherited from ns3::ObjectBase
void	ConstructSelf (const AttributeConstructionList &attributes)
	Complete construction of ObjectBase; invoked by derived classes. More...

virtual void	NotifyConstructionCompleted (void)
	Notifier called once the ObjectBase is fully constructed. More...

Related Functions inherited from ns3::ObjectBase
static TypeId	GetObjectIid (void)
	Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly. More...

Detailed Description

Introspection did not find any typical Config paths.

No Attributes are defined for this type.
No TraceSources are defined for this type.
Size of this type is 24 bytes (on a 64-bit architecture).

Definition at line 33 of file epc-x2-header.h.

Member Enumeration Documentation

◆ ProcedureCode_t

enum ns3::EpcX2Header::ProcedureCode_t

Procedure code enumeration.

Enumerator
HandoverPreparation
LoadIndication
SnStatusTransfer
UeContextRelease
ResourceStatusReporting

Definition at line 86 of file epc-x2-header.h.

◆ TypeOfMessage_t

enum ns3::EpcX2Header::TypeOfMessage_t

Type of message enumeration.

Enumerator
InitiatingMessage
SuccessfulOutcome
UnsuccessfulOutcome

Definition at line 95 of file epc-x2-header.h.

Constructor & Destructor Documentation

◆ EpcX2Header()

ns3::EpcX2Header::EpcX2Header ( )

Definition at line 31 of file epc-x2-header.cc.

◆ ~EpcX2Header()

ns3::EpcX2Header::~EpcX2Header ( )

virtual

Definition at line 39 of file epc-x2-header.cc.

References m_lengthOfIes, m_messageType, m_numberOfIes, and m_procedureCode.

Member Function Documentation

◆ Deserialize()

uint32_t ns3::EpcX2Header::Deserialize ( Buffer::Iterator start )

virtual

Parameters

start an iterator which points to where the header should read from.

Returns: the number of bytes read.

This method is used by Packet::RemoveHeader to re-create a header from the byte buffer of a packet. The data read is expected to match bit-for-bit the representation of this header in real networks.

Note that data is not actually removed from the buffer to which the iterator points. Both Packet::RemoveHeader() and Packet::PeekHeader() call Deserialize(), but only the RemoveHeader() has additional statements to remove the header bytes from the underlying buffer and associated metadata.

Implements ns3::Header.

Definition at line 85 of file epc-x2-header.cc.

References GetSerializedSize(), m_lengthOfIes, m_messageType, m_numberOfIes, m_procedureCode, ns3::Buffer::Iterator::ReadNtohU16(), ns3::Buffer::Iterator::ReadU8(), and visualizer.core::start().

◆ GetInstanceTypeId()

TypeId ns3::EpcX2Header::GetInstanceTypeId ( void ) const

virtual

Get the most derived TypeId for this Object.

This method is typically implemented by ns3::Object::GetInstanceTypeId but some classes which derive from ns3::ObjectBase directly have to implement it themselves.

Returns: The TypeId associated to the most-derived type of this instance.

Implements ns3::ObjectBase.

Definition at line 59 of file epc-x2-header.cc.

References GetTypeId().

◆ GetMessageType()

uint8_t ns3::EpcX2Header::GetMessageType ( ) const

Get message type function.

Returns: the message type

Definition at line 110 of file epc-x2-header.cc.

References m_messageType.

Referenced by ns3::EpcX2::RecvFromX2cSocket().

◆ GetProcedureCode()

uint8_t ns3::EpcX2Header::GetProcedureCode ( ) const

Get procedure code function.

Returns: the procedure code

Definition at line 122 of file epc-x2-header.cc.

References m_procedureCode.

Referenced by ns3::EpcX2::RecvFromX2cSocket().

◆ GetSerializedSize()

uint32_t ns3::EpcX2Header::GetSerializedSize ( void ) const

virtual

Returns: the expected size of the header.

This method is used by Packet::AddHeader to store a header into the byte buffer of a packet. This method should return the number of bytes which are needed to store the full header data by Serialize.

Implements ns3::Header.

Definition at line 65 of file epc-x2-header.cc.

Referenced by Deserialize().

◆ GetTypeId()

TypeId ns3::EpcX2Header::GetTypeId ( void )

static

Get the type ID.

Returns: the object TypeId

Definition at line 48 of file epc-x2-header.cc.

References ns3::TypeId::SetParent().

Referenced by GetInstanceTypeId().

◆ Print()

void ns3::EpcX2Header::Print ( std::ostream & os ) const

virtual

Parameters

os output stream This method is used by Packet::Print to print the content of a header as ascii data to a c++ output stream. Although the header is free to format its output as it wishes, it is recommended to follow a few rules to integrate with the packet pretty printer: start with flags, small field values located between a pair of parens. Values should be separated by whitespace. Follow the parens with the important fields, separated by whitespace. i.e.: (field1 val1 field2 val2 field3 val3) field4 val4 field5 val5

Implements ns3::Header.

Definition at line 101 of file epc-x2-header.cc.

References m_lengthOfIes, m_messageType, m_numberOfIes, and m_procedureCode.

◆ Serialize()

void ns3::EpcX2Header::Serialize ( Buffer::Iterator start ) const

virtual

Parameters

start an iterator which points to where the header should be written.

This method is used by Packet::AddHeader to store a header into the byte buffer of a packet. The data written is expected to match bit-for-bit the representation of this header in a real network.

Implements ns3::Header.

Definition at line 71 of file epc-x2-header.cc.

References m_lengthOfIes, m_messageType, m_numberOfIes, m_procedureCode, visualizer.core::start(), ns3::Buffer::Iterator::WriteHtonU16(), and ns3::Buffer::Iterator::WriteU8().