`pwnlib.util.crc` — Calculating CRC-sums¶

Module for calculating CRC-sums.

Contains all crc implementations know on the interwebz. For most implementations it contains only the core crc algorithm and not e.g. padding schemes.

It is horribly slow, as implements a naive algorithm working direclty on bit polynomials. This class is exposed as BitPolynom.

The current algorithm is super-linear and takes about 4 seconds to calculate the crc32-sum of 'A'*40000.

An obvious optimization would be to actually generate some lookup-tables.

class pwnlib.util.crc.BitPolynom(n)[source]¶

Class for representing GF(2)[X], i.e. the field of polynomials over GF(2).

In practice the polynomials are represented as numbers such that x**n corresponds to 1 << n. In this representation calculations are easy: Just do everything as normal, but forget about everything the carries.

Addition becomes xor and multiplication becomes carry-less multiplication.

Examples

>>> p1 = BitPolynom("x**3 + x + 1")
>>> p1
BitPolynom('x**3 + x + 1')
>>> int(p1)
11
>>> p1 == BitPolynom(11)
True
>>> p2 = BitPolynom("x**2 + x + 1")
>>> p1 + p2
BitPolynom('x**3 + x**2')
>>> p1 * p2
BitPolynom('x**5 + x**4 + 1')
>>> p1 // p2
BitPolynom('x + 1')
>>> p1 % p2
BitPolynom('x')
>>> d, r = divmod(p1, p2)
>>> d * p2 + r == p1
True
>>> BitPolynom(-1)
Traceback (most recent call last):
    ...
ValueError: Polynomials cannot be negative: -1
>>> BitPolynom('y')
Traceback (most recent call last):
    ...
ValueError: Not a valid polynomial: y

degree()[source]¶

Returns the degree of the polynomial.

Examples

>>> BitPolynom(0).degree()
0
>>> BitPolynom(1).degree()
0
>>> BitPolynom(2).degree()
1
>>> BitPolynom(7).degree()
2
>>> BitPolynom((1 << 10) - 1).degree()
9
>>> BitPolynom(1 << 10).degree()
10

pwnlib.util.crc.generic_crc(data, polynom, width, init, refin, refout, xorout)[source]¶

A generic CRC-sum function.

This is suitable to use with: http://reveng.sourceforge.net/crc-catalogue/all.htm

The “check” value in the document is the CRC-sum of the string “123456789”.

Parameters:

data (str) – The data to calculate the CRC-sum of. This should either be a string or a list of bits.
polynom (int) – The polynomial to use.
init (int) – If the CRC-sum was calculated in hardware, then this would b the initial value of the checksum register.
refin (bool) – Should the input bytes be reflected?
refout (bool) – Should the checksum be reflected?
xorout (int) – The value to xor the checksum with before outputting

pwnlib.util.crc.cksum(data) → int[source]¶

Calculates the same checksum as returned by the UNIX-tool cksum.

Parameters:	data (str) – The data to checksum.

Example

>>> print cksum('123456789')
930766865

pwnlib.util.crc.find_crc_function(data, checksum)[source]¶

Finds all known CRC functions that hashes a piece of data into a specific checksum. It does this by trying all known CRC functions one after the other.

Parameters:	data (str) – Data for which the checksum is known.

Example

>>> find_crc_function('test', 46197)
[<function crc_crc_16_dnp at ...>]

pwnlib.util.crc.arc(data) → int[source]¶

Calculates the arc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x8005
width = 16
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print arc('123456789')
47933

pwnlib.util.crc.crc_10(data) → int[source]¶

Calculates the crc_10 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x233
width = 10
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_10('123456789')
409

pwnlib.util.crc.crc_10_cdma2000(data) → int[source]¶

Calculates the crc_10_cdma2000 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x3d9
width = 10
init = 0x3ff
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_10_cdma2000('123456789')
563

pwnlib.util.crc.crc_10_gsm(data) → int[source]¶

Calculates the crc_10_gsm checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x175
width = 10
init = 0x0
refin = False
refout = False
xorout = 0x3ff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_10_gsm('123456789')
298

pwnlib.util.crc.crc_11(data) → int[source]¶

Calculates the crc_11 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x385
width = 11
init = 0x1a
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_11('123456789')
1443

pwnlib.util.crc.crc_11_umts(data) → int[source]¶

Calculates the crc_11_umts checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x307
width = 11
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_11_umts('123456789')
97

pwnlib.util.crc.crc_12_cdma2000(data) → int[source]¶

Calculates the crc_12_cdma2000 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0xf13
width = 12
init = 0xfff
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_12_cdma2000('123456789')
3405

pwnlib.util.crc.crc_12_dect(data) → int[source]¶

Calculates the crc_12_dect checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x80f
width = 12
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_12_dect('123456789')
3931

pwnlib.util.crc.crc_12_gsm(data) → int[source]¶

Calculates the crc_12_gsm checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0xd31
width = 12
init = 0x0
refin = False
refout = False
xorout = 0xfff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_12_gsm('123456789')
2868

pwnlib.util.crc.crc_12_umts(data) → int[source]¶

Calculates the crc_12_umts checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x80f
width = 12
init = 0x0
refin = False
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_12_umts('123456789')
3503

pwnlib.util.crc.crc_13_bbc(data) → int[source]¶

Calculates the crc_13_bbc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1cf5
width = 13
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_13_bbc('123456789')
1274

pwnlib.util.crc.crc_14_darc(data) → int[source]¶

Calculates the crc_14_darc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x805
width = 14
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_14_darc('123456789')
2093

pwnlib.util.crc.crc_14_gsm(data) → int[source]¶

Calculates the crc_14_gsm checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x202d
width = 14
init = 0x0
refin = False
refout = False
xorout = 0x3fff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_14_gsm('123456789')
12462

pwnlib.util.crc.crc_15(data) → int[source]¶

Calculates the crc_15 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x4599
width = 15
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_15('123456789')
1438

pwnlib.util.crc.crc_15_mpt1327(data) → int[source]¶

Calculates the crc_15_mpt1327 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x6815
width = 15
init = 0x0
refin = False
refout = False
xorout = 0x1

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_15_mpt1327('123456789')
9574

pwnlib.util.crc.crc_16_aug_ccitt(data) → int[source]¶

Calculates the crc_16_aug_ccitt checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0x1d0f
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_aug_ccitt('123456789')
58828

pwnlib.util.crc.crc_16_buypass(data) → int[source]¶

Calculates the crc_16_buypass checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x8005
width = 16
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_buypass('123456789')
65256

pwnlib.util.crc.crc_16_ccitt_false(data) → int[source]¶

Calculates the crc_16_ccitt_false checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0xffff
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_ccitt_false('123456789')
10673

pwnlib.util.crc.crc_16_cdma2000(data) → int[source]¶

Calculates the crc_16_cdma2000 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0xc867
width = 16
init = 0xffff
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_cdma2000('123456789')
19462

pwnlib.util.crc.crc_16_cms(data) → int[source]¶

Calculates the crc_16_cms checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x8005
width = 16
init = 0xffff
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_cms('123456789')
44775

pwnlib.util.crc.crc_16_dds_110(data) → int[source]¶

Calculates the crc_16_dds_110 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x8005
width = 16
init = 0x800d
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_dds_110('123456789')
40655

pwnlib.util.crc.crc_16_dect_r(data) → int[source]¶

Calculates the crc_16_dect_r checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x589
width = 16
init = 0x0
refin = False
refout = False
xorout = 0x1

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_dect_r('123456789')
126

pwnlib.util.crc.crc_16_dect_x(data) → int[source]¶

Calculates the crc_16_dect_x checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x589
width = 16
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_dect_x('123456789')
127

pwnlib.util.crc.crc_16_dnp(data) → int[source]¶

Calculates the crc_16_dnp checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x3d65
width = 16
init = 0x0
refin = True
refout = True
xorout = 0xffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_dnp('123456789')
60034

pwnlib.util.crc.crc_16_en_13757(data) → int[source]¶

Calculates the crc_16_en_13757 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x3d65
width = 16
init = 0x0
refin = False
refout = False
xorout = 0xffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_en_13757('123456789')
49847

pwnlib.util.crc.crc_16_genibus(data) → int[source]¶

Calculates the crc_16_genibus checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0xffff
refin = False
refout = False
xorout = 0xffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_genibus('123456789')
54862

pwnlib.util.crc.crc_16_gsm(data) → int[source]¶

Calculates the crc_16_gsm checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0x0
refin = False
refout = False
xorout = 0xffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_gsm('123456789')
52796

pwnlib.util.crc.crc_16_lj1200(data) → int[source]¶

Calculates the crc_16_lj1200 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x6f63
width = 16
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_lj1200('123456789')
48628

pwnlib.util.crc.crc_16_maxim(data) → int[source]¶

Calculates the crc_16_maxim checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x8005
width = 16
init = 0x0
refin = True
refout = True
xorout = 0xffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_maxim('123456789')
17602

pwnlib.util.crc.crc_16_mcrf4xx(data) → int[source]¶

Calculates the crc_16_mcrf4xx checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0xffff
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_mcrf4xx('123456789')
28561

pwnlib.util.crc.crc_16_opensafety_a(data) → int[source]¶

Calculates the crc_16_opensafety_a checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x5935
width = 16
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_opensafety_a('123456789')
23864

pwnlib.util.crc.crc_16_opensafety_b(data) → int[source]¶

Calculates the crc_16_opensafety_b checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x755b
width = 16
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_opensafety_b('123456789')
8446

pwnlib.util.crc.crc_16_profibus(data) → int[source]¶

Calculates the crc_16_profibus checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1dcf
width = 16
init = 0xffff
refin = False
refout = False
xorout = 0xffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_profibus('123456789')
43033

pwnlib.util.crc.crc_16_riello(data) → int[source]¶

Calculates the crc_16_riello checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0xb2aa
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_riello('123456789')
25552

pwnlib.util.crc.crc_16_t10_dif(data) → int[source]¶

Calculates the crc_16_t10_dif checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x8bb7
width = 16
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_t10_dif('123456789')
53467

pwnlib.util.crc.crc_16_teledisk(data) → int[source]¶

Calculates the crc_16_teledisk checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0xa097
width = 16
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_teledisk('123456789')
4019

pwnlib.util.crc.crc_16_tms37157(data) → int[source]¶

Calculates the crc_16_tms37157 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0x89ec
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_tms37157('123456789')
9905

pwnlib.util.crc.crc_16_usb(data) → int[source]¶

Calculates the crc_16_usb checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x8005
width = 16
init = 0xffff
refin = True
refout = True
xorout = 0xffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_16_usb('123456789')
46280

pwnlib.util.crc.crc_24(data) → int[source]¶

Calculates the crc_24 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x864cfb
width = 24
init = 0xb704ce
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_24('123456789')
2215682

pwnlib.util.crc.crc_24_ble(data) → int[source]¶

Calculates the crc_24_ble checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x65b
width = 24
init = 0x555555
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_24_ble('123456789')
12737110

pwnlib.util.crc.crc_24_flexray_a(data) → int[source]¶

Calculates the crc_24_flexray_a checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x5d6dcb
width = 24
init = 0xfedcba
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_24_flexray_a('123456789')
7961021

pwnlib.util.crc.crc_24_flexray_b(data) → int[source]¶

Calculates the crc_24_flexray_b checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x5d6dcb
width = 24
init = 0xabcdef
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_24_flexray_b('123456789')
2040760

pwnlib.util.crc.crc_24_interlaken(data) → int[source]¶

Calculates the crc_24_interlaken checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x328b63
width = 24
init = 0xffffff
refin = False
refout = False
xorout = 0xffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_24_interlaken('123456789')
11858918

pwnlib.util.crc.crc_24_lte_a(data) → int[source]¶

Calculates the crc_24_lte_a checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x864cfb
width = 24
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_24_lte_a('123456789')
13494019

pwnlib.util.crc.crc_24_lte_b(data) → int[source]¶

Calculates the crc_24_lte_b checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x800063
width = 24
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_24_lte_b('123456789')
2355026

pwnlib.util.crc.crc_30_cdma(data) → int[source]¶

Calculates the crc_30_cdma checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x2030b9c7
width = 30
init = 0x3fffffff
refin = False
refout = False
xorout = 0x3fffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_30_cdma('123456789')
79907519

pwnlib.util.crc.crc_31_philips(data) → int[source]¶

Calculates the crc_31_philips checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x4c11db7
width = 31
init = 0x7fffffff
refin = False
refout = False
xorout = 0x7fffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_31_philips('123456789')
216654956

pwnlib.util.crc.crc_32(data) → int[source]¶

Calculates the crc_32 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x4c11db7
width = 32
init = 0xffffffff
refin = True
refout = True
xorout = 0xffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_32('123456789')
3421780262

pwnlib.util.crc.crc_32_autosar(data) → int[source]¶

Calculates the crc_32_autosar checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0xf4acfb13
width = 32
init = 0xffffffff
refin = True
refout = True
xorout = 0xffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_32_autosar('123456789')
379048042

pwnlib.util.crc.crc_32_bzip2(data) → int[source]¶

Calculates the crc_32_bzip2 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x4c11db7
width = 32
init = 0xffffffff
refin = False
refout = False
xorout = 0xffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_32_bzip2('123456789')
4236843288

pwnlib.util.crc.crc_32_mpeg_2(data) → int[source]¶

Calculates the crc_32_mpeg_2 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x4c11db7
width = 32
init = 0xffffffff
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_32_mpeg_2('123456789')
58124007

pwnlib.util.crc.crc_32_posix(data) → int[source]¶

Calculates the crc_32_posix checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x4c11db7
width = 32
init = 0x0
refin = False
refout = False
xorout = 0xffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_32_posix('123456789')
1985902208

pwnlib.util.crc.crc_32c(data) → int[source]¶

Calculates the crc_32c checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1edc6f41
width = 32
init = 0xffffffff
refin = True
refout = True
xorout = 0xffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_32c('123456789')
3808858755

pwnlib.util.crc.crc_32d(data) → int[source]¶

Calculates the crc_32d checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0xa833982b
width = 32
init = 0xffffffff
refin = True
refout = True
xorout = 0xffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_32d('123456789')
2268157302

pwnlib.util.crc.crc_32q(data) → int[source]¶

Calculates the crc_32q checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x814141ab
width = 32
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_32q('123456789')
806403967

pwnlib.util.crc.crc_3_gsm(data) → int[source]¶

Calculates the crc_3_gsm checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x3
width = 3
init = 0x0
refin = False
refout = False
xorout = 0x7

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_3_gsm('123456789')
4

pwnlib.util.crc.crc_3_rohc(data) → int[source]¶

Calculates the crc_3_rohc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x3
width = 3
init = 0x7
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_3_rohc('123456789')
6

pwnlib.util.crc.crc_40_gsm(data) → int[source]¶

Calculates the crc_40_gsm checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x4820009
width = 40
init = 0x0
refin = False
refout = False
xorout = 0xffffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_40_gsm('123456789')
910907393606

pwnlib.util.crc.crc_4_interlaken(data) → int[source]¶

Calculates the crc_4_interlaken checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x3
width = 4
init = 0xf
refin = False
refout = False
xorout = 0xf

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_4_interlaken('123456789')
11

pwnlib.util.crc.crc_4_itu(data) → int[source]¶

Calculates the crc_4_itu checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x3
width = 4
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_4_itu('123456789')
7

pwnlib.util.crc.crc_5_epc(data) → int[source]¶

Calculates the crc_5_epc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x9
width = 5
init = 0x9
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_5_epc('123456789')
0

pwnlib.util.crc.crc_5_itu(data) → int[source]¶

Calculates the crc_5_itu checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x15
width = 5
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_5_itu('123456789')
7

pwnlib.util.crc.crc_5_usb(data) → int[source]¶

Calculates the crc_5_usb checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x5
width = 5
init = 0x1f
refin = True
refout = True
xorout = 0x1f

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_5_usb('123456789')
25

pwnlib.util.crc.crc_64(data) → int[source]¶

Calculates the crc_64 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x42f0e1eba9ea3693
width = 64
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_64('123456789')
7800480153909949255

pwnlib.util.crc.crc_64_go_iso(data) → int[source]¶

Calculates the crc_64_go_iso checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1b
width = 64
init = 0xffffffffffffffff
refin = True
refout = True
xorout = 0xffffffffffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_64_go_iso('123456789')
13333283586479230977

pwnlib.util.crc.crc_64_we(data) → int[source]¶

Calculates the crc_64_we checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x42f0e1eba9ea3693
width = 64
init = 0xffffffffffffffff
refin = False
refout = False
xorout = 0xffffffffffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_64_we('123456789')
7128171145767219210

pwnlib.util.crc.crc_64_xz(data) → int[source]¶

Calculates the crc_64_xz checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x42f0e1eba9ea3693
width = 64
init = 0xffffffffffffffff
refin = True
refout = True
xorout = 0xffffffffffffffff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_64_xz('123456789')
11051210869376104954

pwnlib.util.crc.crc_6_cdma2000_a(data) → int[source]¶

Calculates the crc_6_cdma2000_a checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x27
width = 6
init = 0x3f
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_6_cdma2000_a('123456789')
13

pwnlib.util.crc.crc_6_cdma2000_b(data) → int[source]¶

Calculates the crc_6_cdma2000_b checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x7
width = 6
init = 0x3f
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_6_cdma2000_b('123456789')
59

pwnlib.util.crc.crc_6_darc(data) → int[source]¶

Calculates the crc_6_darc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x19
width = 6
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_6_darc('123456789')
38

pwnlib.util.crc.crc_6_gsm(data) → int[source]¶

Calculates the crc_6_gsm checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x2f
width = 6
init = 0x0
refin = False
refout = False
xorout = 0x3f

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_6_gsm('123456789')
19

pwnlib.util.crc.crc_6_itu(data) → int[source]¶

Calculates the crc_6_itu checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x3
width = 6
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_6_itu('123456789')
6

pwnlib.util.crc.crc_7(data) → int[source]¶

Calculates the crc_7 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x9
width = 7
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_7('123456789')
117

pwnlib.util.crc.crc_7_rohc(data) → int[source]¶

Calculates the crc_7_rohc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x4f
width = 7
init = 0x7f
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_7_rohc('123456789')
83

pwnlib.util.crc.crc_7_umts(data) → int[source]¶

Calculates the crc_7_umts checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x45
width = 7
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_7_umts('123456789')
97

pwnlib.util.crc.crc_8(data) → int[source]¶

Calculates the crc_8 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x7
width = 8
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8('123456789')
244

pwnlib.util.crc.crc_82_darc(data) → int[source]¶

Calculates the crc_82_darc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x308c0111011401440411
width = 82
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_82_darc('123456789')
749237524598872659187218

pwnlib.util.crc.crc_8_autosar(data) → int[source]¶

Calculates the crc_8_autosar checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x2f
width = 8
init = 0xff
refin = False
refout = False
xorout = 0xff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_autosar('123456789')
223

pwnlib.util.crc.crc_8_cdma2000(data) → int[source]¶

Calculates the crc_8_cdma2000 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x9b
width = 8
init = 0xff
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_cdma2000('123456789')
218

pwnlib.util.crc.crc_8_darc(data) → int[source]¶

Calculates the crc_8_darc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x39
width = 8
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_darc('123456789')
21

pwnlib.util.crc.crc_8_dvb_s2(data) → int[source]¶

Calculates the crc_8_dvb_s2 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0xd5
width = 8
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_dvb_s2('123456789')
188

pwnlib.util.crc.crc_8_ebu(data) → int[source]¶

Calculates the crc_8_ebu checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1d
width = 8
init = 0xff
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_ebu('123456789')
151

pwnlib.util.crc.crc_8_gsm_a(data) → int[source]¶

Calculates the crc_8_gsm_a checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1d
width = 8
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_gsm_a('123456789')
55

pwnlib.util.crc.crc_8_gsm_b(data) → int[source]¶

Calculates the crc_8_gsm_b checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x49
width = 8
init = 0x0
refin = False
refout = False
xorout = 0xff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_gsm_b('123456789')
148

pwnlib.util.crc.crc_8_i_code(data) → int[source]¶

Calculates the crc_8_i_code checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1d
width = 8
init = 0xfd
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_i_code('123456789')
126

pwnlib.util.crc.crc_8_itu(data) → int[source]¶

Calculates the crc_8_itu checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x7
width = 8
init = 0x0
refin = False
refout = False
xorout = 0x55

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_itu('123456789')
161

pwnlib.util.crc.crc_8_lte(data) → int[source]¶

Calculates the crc_8_lte checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x9b
width = 8
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_lte('123456789')
234

pwnlib.util.crc.crc_8_maxim(data) → int[source]¶

Calculates the crc_8_maxim checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x31
width = 8
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_maxim('123456789')
161

pwnlib.util.crc.crc_8_opensafety(data) → int[source]¶

Calculates the crc_8_opensafety checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x2f
width = 8
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_opensafety('123456789')
62

pwnlib.util.crc.crc_8_rohc(data) → int[source]¶

Calculates the crc_8_rohc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x7
width = 8
init = 0xff
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_rohc('123456789')
208

pwnlib.util.crc.crc_8_sae_j1850(data) → int[source]¶

Calculates the crc_8_sae_j1850 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1d
width = 8
init = 0xff
refin = False
refout = False
xorout = 0xff

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_sae_j1850('123456789')
75

pwnlib.util.crc.crc_8_wcdma(data) → int[source]¶

Calculates the crc_8_wcdma checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x9b
width = 8
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_8_wcdma('123456789')
37

pwnlib.util.crc.crc_a(data) → int[source]¶

Calculates the crc_a checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0xc6c6
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print crc_a('123456789')
48901

pwnlib.util.crc.jamcrc(data) → int[source]¶

Calculates the jamcrc checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x4c11db7
width = 32
init = 0xffffffff
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print jamcrc('123456789')
873187033

pwnlib.util.crc.kermit(data) → int[source]¶

Calculates the kermit checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0x0
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print kermit('123456789')
8585

pwnlib.util.crc.modbus(data) → int[source]¶

Calculates the modbus checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x8005
width = 16
init = 0xffff
refin = True
refout = True
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print modbus('123456789')
19255

pwnlib.util.crc.x_25(data) → int[source]¶

Calculates the x_25 checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0xffff
refin = True
refout = True
xorout = 0xffff

Parameters:	data (str) – The data to checksum.

Example

>>> print x_25('123456789')
36974

pwnlib.util.crc.xfer(data) → int[source]¶

Calculates the xfer checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0xaf
width = 32
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print xfer('123456789')
3171672888

pwnlib.util.crc.xmodem(data) → int[source]¶

Calculates the xmodem checksum.

This is simply the generic_crc() with these frozen arguments:

polynom = 0x1021
width = 16
init = 0x0
refin = False
refout = False
xorout = 0x0

Parameters:	data (str) – The data to checksum.

Example

>>> print xmodem('123456789')
12739

pwnlib.util.crc — Calculating CRC-sums¶

`pwnlib.util.crc` — Calculating CRC-sums¶