The AtHeart program is designed for makers and companies wanting to make their products easily recognisable as based on the Arduino technology. Shop AtHeart products on our Store.
Below are the official AtHeart products.

EMoRo Kit

EMoRo (Educational Mobile Robot) by Inovatic is an Arduino-compatible robot designed to encourage logical thinking and technical curiosity in a fun, engaging way. The DIY Kit includes a robust aluminum chassis and several interchangeable components that introduce kids to the basics of microcontrollers, coding, and robotics. Based on an ATmega250 controller, EMoRo can be programmed using the Arduino IDE, and supports other construction sets like LEGO Technic, Eitech, and Fischertechnik.

EMoRo Website

Buy the 2560 controller or the Basic , Advanced or Pro Robot kit

GOBLIN 2

GOBLIN 2 is an Arduino-compatible IoT development board based on the ATmega328P. It features a SIM5320A module at its core, providing dual-band HSDPA and quad-band GSM/GPRS/EDGE connectivity, as well as high accuracy 16-channel GPS. The board includes a built-in battery management system and a voltage converter up to 24V.

VERSE Technology Website

M2 by Macchina

M2 by Macchina is an open and versatile automotive interface that can take your car to the next level. Use it to customize your ride or as a development platform for your next product. M2 works with almost any vehicle and features an Arduino Due processor at its core. An XBee form factor socket allows for many wireless capabilities.

M2 by Macchina Website

UnlimitedHand

A haptic game controller designed to be used with virtual reality. The device grants wearers the ability to interact with the gameworld through touch. A motion sensor and an array of muscle movement sensors are embedded into the UnlimitedHand allowing the wearer to input Hand and Finger movements into virtual environments. In addition, a multi-channel Electric Muscle Stimulation device is built in to the device which contracts the muscles on the wearer’s forearm to simulate haptic feedback.

UnlimitedHand Website

Buy it now

4Duino-24

4Duino-24 combines the ATmega32U4 8-bit microcontroller (Leonardo) with a 2.4” TFT LCD with Resistive Touch and ESP8266 Wi-Fi. 100% compatible with the Arduino IDE and fully supported in 4D Systems’ 4D Workshop 4 IDE, making development of beautiful Graphical User Interfaces with touch and Wi-Fi capabilities a breeze.

4duino

Buy it now

SK-4Duino-24

Starter Kit for 4Duino-24 - 2.4", 240x320 pixels, Arduino IDE Programmable Intelligent Display Module with Resistive Touch and Integrated WiFi. Includes 4Duino-24, 4GB Industrial microSD card and uUSB-PA5-II Programming Adaptor.

4duino

Buy it now

mBot - All-in-One Learning Robot

mBot (Bluetooth Version) by Makeblock, is an all-in-one solution for kids and beginners to enjoy the hands-on experience about programming, electronics, and robotics. Working with mBlock inspired by Scratch 2.0, controlled by Bluetooth, this easy-to-assemble mBot provides infinite possibilities for your kid to learn STEM education.

mBot Website

Buy it Pink or buy it Blue

Industruino Proto Kit

Industruino PROTO is a robust DIN-Rail mountable Leonardo compatible industrial controller with LCD. It lets you take your existing Arduino projects and swiftly transform into permanent installations. The prototyping area and screw connectors allow you to install your own circuitry and reliably connect to accessories.

Industruino Website
Buy it

NEWTC Prototyping board

The Prototyping Board by NEWTC comes in two versions: the DIY version you can assemble and solder yourself and the Assembled version ready to be used. The CPU of the boards ( ATMEGA328P-PU ) is already burned with Arduino Uno bootloader. In addition to the boards, NEWTC provides the AtHeart USB to Serial uploader for Arduino compatible boards.

NEWTC DIY version

NEWTC Assembled version

Hummingbird Duo

Make and program robots, animatronics, and more with Hummingbird Duo. Use Duo while tethered in Scratch 2.0, Snap, and our own storyboarding interface, or unplug and use it as an Arduino. No experience with electronics or programming required, but still fun and educational for advanced makers.

www.hummingbirdkit.com
Controller Kit, Base Kit, Premium Kit

Microview

The MicroView is the first chip-sized Arduino compatible that lets you see what your Arduino is thinking by using a built-in OLED display. In the heart of MicroView there is an Atmel ATmega328P and a 64x48 pixel OLED display, together with other passive components that allow the MicroView to operate without any external components other than a power supply.

Microview at Sparkfun

littleBits Arduino Module

The littleBits Arduino module will allow users to easily write programs in the Arduino IDE in order to read sensors and control lights and motors within the littleBits system.

www.littlebits.com
Buy it now

littleBits Arduino Coding Kit

The littleBits Arduino Coding Kit allow users to getting started to create inventions that communicate with software (Processing, MaxMSP, etc.), with the support of step-by-step instructions, helpful resources online and 8 sample sketches (pre-made code) included. Learn the skills of the future: coding, engineering, and creativity.

www.littlebits.com

EarthLCD - ArLCD

The ArLCD is a 3.5″ TouchScreen Color LCD combined with an Arduino UNO. The ArLCD is easy to program using the Arduino IDE and the Arduino ezLCD library. A multitude of fonts, images, widgets and sample macros are included to get you going quickly! Widgets include: analog meter, buttons, checkbox, dial, radio button, slider, and others!

www.earthlcd.com
Buy it now

Smart Citizen Kit

An Open-Source Environmental Monitoring Platform consisting of Arduino-compatible hardware, data visualization web API, and mobile app. Smart Citizen is a platform to generate participatory processes of people in the cities. Connecting data, people and knowledge, the objective is to serve as a node for building productive and open indicators, and distributed tools, and thereafter the collective construction of the city for its own inhabitants.

www.smartcitizen.me


Program

The program is available for any product that includes a processor that is currently supported by the Arduino Development environment (see list below).

Benefits

  • Tap into the power of the huge Arduino community.
  • Make it easy for an end-user to customize the product with just a micro-usb cable and the Arduino IDE.
  • Add the AtHeart logo on the product to clearly show that your product is based on the Arduino technology.
  • A page on the Arduino website describing the product with links to documentation, tutorials, and any other marketing material.
  • Participate in Arduino marketing activities.
  • Your product news and updates tweeted and blogged through Arduino's official accounts.
  • If desired, your product will be made available through our online stores.

Requirements

  • Participation in the program requires paying a small licensing fee for the AtHeart branding.
  • This program applies to finished products like alarm clocks, watches, toys, lamps, radios and similar as well as "activity boards” that further abstract the electronics and software from the Arduino base.
  • Arduino Clones are excluded from the program (i.e. boards that are a straight copies of official Arduino boards)

Supported processors

These are the currently supported microcontrollers:

  • ATMega328P clocked at 8 or 16 MHz
  • ATMega1280 clocked at 16 MHz
  • ATMega2560 clocked at 16 MHz
  • ATMega32U4 at 8 or 16 MHz
  • ATMega64M1 at 16 Mhz
  • ATmega168
  • ATtiny85
  • ATmega8
  • SAM3X
  • SAMD21
  • Intel Curie


For more information about the AtHeart program please contact at_heart [at] arduino.cc