SizeRequirements

java.lang.Object
- javax.swing.SizeRequirements

All Implemented Interfaces:

Serializable
```
public class SizeRequirements
extends Object
implements Serializable
```
For the convenience of layout managers, calculates information about the size and position of components. All size and position calculation methods are class methods that take arrays of SizeRequirements as arguments. The SizeRequirements class supports two types of layout:

tiled
The components are placed end-to-end, starting either at coordinate 0 (the leftmost or topmost position) or at the coordinate representing the end of the allocated span (the rightmost or bottommost position).
aligned
The components are aligned as specified by each component's X or Y alignment value.

Each SizeRequirements object contains information about either the width (and X alignment) or height (and Y alignment) of a single component or a group of components:

minimum
The smallest reasonable width/height of the component or component group, in pixels.
preferred
The natural width/height of the component or component group, in pixels.
maximum
The largest reasonable width/height of the component or component group, in pixels.
alignment
The X/Y alignment of the component or component group.

Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications running the same version of Swing. As of 1.4, support for long term storage of all JavaBeans^TM has been added to the java.beans package. Please see XMLEncoder.

See Also:
Component.getMinimumSize(), Component.getPreferredSize(), Component.getMaximumSize(), Component.getAlignmentX(), Component.getAlignmentY()

Field Summary

Fields
Modifier and Type	Field and Description
`float`	`alignment` The alignment, specified as a value between 0.0 and 1.0, inclusive.
`int`	`maximum` The maximum size allowed.
`int`	`minimum` The minimum size required.
`int`	`preferred` The preferred (natural) size.

Constructor Summary

Constructors
Constructor and Description
`SizeRequirements()` Creates a SizeRequirements object with the minimum, preferred, and maximum sizes set to zero and an alignment value of 0.5 (centered).
`SizeRequirements(int min, int pref, int max, float a)` Creates a SizeRequirements object with the specified minimum, preferred, and maximum sizes and the specified alignment.

Method Summary

Methods
Modifier and Type	Method and Description
`static int[]`	`adjustSizes(int delta, SizeRequirements[] children)` Adjust a specified array of sizes by a given amount.
`static void`	`calculateAlignedPositions(int allocated, SizeRequirements total, SizeRequirements[] children, int[] offsets, int[] spans)` Creates a bunch of offset/span pairs specifying how to lay out a set of components with the specified alignments.
`static void`	`calculateAlignedPositions(int allocated, SizeRequirements total, SizeRequirements[] children, int[] offsets, int[] spans, boolean normal)` Creates a set of offset/span pairs specifying how to lay out a set of components with the specified alignments.
`static void`	`calculateTiledPositions(int allocated, SizeRequirements total, SizeRequirements[] children, int[] offsets, int[] spans)` Creates a set of offset/span pairs representing how to lay out a set of components end-to-end.
`static void`	`calculateTiledPositions(int allocated, SizeRequirements total, SizeRequirements[] children, int[] offsets, int[] spans, boolean forward)` Creates a set of offset/span pairs representing how to lay out a set of components end-to-end.
`static SizeRequirements`	`getAlignedSizeRequirements(SizeRequirements[] children)` Determines the total space necessary to align a set of components.
`static SizeRequirements`	`getTiledSizeRequirements(SizeRequirements[] children)` Determines the total space necessary to place a set of components end-to-end.
`String`	`toString()` Returns a string describing the minimum, preferred, and maximum size requirements, along with the alignment.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Field Detail
  - minimum
```
public int minimum
```
    The minimum size required. For a component comp, this should be equal to either comp.getMinimumSize().width or comp.getMinimumSize().height.
  - preferred
```
public int preferred
```
    The preferred (natural) size. For a component comp, this should be equal to either comp.getPreferredSize().width or comp.getPreferredSize().height.
  - maximum
```
public int maximum
```
    The maximum size allowed. For a component comp, this should be equal to either comp.getMaximumSize().width or comp.getMaximumSize().height.
  - alignment
```
public float alignment
```
    The alignment, specified as a value between 0.0 and 1.0, inclusive. To specify centering, the alignment should be 0.5.
- Constructor Detail
  - SizeRequirements
```
public SizeRequirements()
```
    Creates a SizeRequirements object with the minimum, preferred, and maximum sizes set to zero and an alignment value of 0.5 (centered).
  - SizeRequirements
```
public SizeRequirements(int min,
                int pref,
                int max,
                float a)
```
    Creates a SizeRequirements object with the specified minimum, preferred, and maximum sizes and the specified alignment.
    
    Parameters:
    min - the minimum size >= 0
    pref - the preferred size >= 0
    max - the maximum size >= 0
    a - the alignment >= 0.0f && <= 1.0f
- Method Detail
  - toString
```
public String toString()
```
    Returns a string describing the minimum, preferred, and maximum size requirements, along with the alignment.
    
    Overrides:
    
    toString in class Object
    
    Returns:
    the string
  - getTiledSizeRequirements
```
public static SizeRequirements getTiledSizeRequirements(SizeRequirements[] children)
```
    Determines the total space necessary to place a set of components end-to-end. The needs of each component in the set are represented by an entry in the passed-in SizeRequirements array. The returned SizeRequirements object has an alignment of 0.5 (centered). The space requirement is never more than Integer.MAX_VALUE.
    
    Parameters:
    children - the space requirements for a set of components. The vector may be of zero length, which will result in a default SizeRequirements object instance being passed back.
    
    Returns:
    the total space requirements.
  - getAlignedSizeRequirements
```
public static SizeRequirements getAlignedSizeRequirements(SizeRequirements[] children)
```
    Determines the total space necessary to align a set of components. The needs of each component in the set are represented by an entry in the passed-in SizeRequirements array. The total space required will never be more than Integer.MAX_VALUE.
    
    Parameters:
    children - the set of child requirements. If of zero length, the returns result will be a default instance of SizeRequirements.
    
    Returns:
    the total space requirements.
  - calculateTiledPositions
```
public static void calculateTiledPositions(int allocated,
                           SizeRequirements total,
                           SizeRequirements[] children,
                           int[] offsets,
                           int[] spans)
```
    Creates a set of offset/span pairs representing how to lay out a set of components end-to-end. This method requires that you specify the total amount of space to be allocated, the size requirements for each component to be placed (specified as an array of SizeRequirements), and the total size requirement of the set of components. You can get the total size requirement by invoking the getTiledSizeRequirements method. The components will be tiled in the forward direction with offsets increasing from 0.
    
    Parameters:
    allocated - the total span to be allocated >= 0.
    total - the total of the children requests. This argument is optional and may be null.
    children - the size requirements for each component.
    offsets - the offset from 0 for each child where the spans were allocated (determines placement of the span).
    spans - the span allocated for each child to make the total target span.
  - calculateTiledPositions
```
public static void calculateTiledPositions(int allocated,
                           SizeRequirements total,
                           SizeRequirements[] children,
                           int[] offsets,
                           int[] spans,
                           boolean forward)
```
    Creates a set of offset/span pairs representing how to lay out a set of components end-to-end. This method requires that you specify the total amount of space to be allocated, the size requirements for each component to be placed (specified as an array of SizeRequirements), and the total size requirement of the set of components. You can get the total size requirement by invoking the getTiledSizeRequirements method. This method also requires a flag indicating whether components should be tiled in the forward direction (offsets increasing from 0) or reverse direction (offsets decreasing from the end of the allocated space). The forward direction represents components tiled from left to right or top to bottom. The reverse direction represents components tiled from right to left or bottom to top.
    
    Parameters:
    allocated - the total span to be allocated >= 0.
    total - the total of the children requests. This argument is optional and may be null.
    children - the size requirements for each component.
    offsets - the offset from 0 for each child where the spans were allocated (determines placement of the span).
    spans - the span allocated for each child to make the total target span.
    forward - tile with offsets increasing from 0 if true and with offsets decreasing from the end of the allocated space if false.
    Since:
    
    1.4
  - calculateAlignedPositions
```
public static void calculateAlignedPositions(int allocated,
                             SizeRequirements total,
                             SizeRequirements[] children,
                             int[] offsets,
                             int[] spans)
```
    Creates a bunch of offset/span pairs specifying how to lay out a set of components with the specified alignments. The resulting span allocations will overlap, with each one fitting as well as possible into the given total allocation. This method requires that you specify the total amount of space to be allocated, the size requirements for each component to be placed (specified as an array of SizeRequirements), and the total size requirements of the set of components (only the alignment field of which is actually used). You can get the total size requirement by invoking getAlignedSizeRequirements. Normal alignment will be done with an alignment value of 0.0f representing the left/top edge of a component.
    
    Parameters:
    allocated - the total span to be allocated >= 0.
    total - the total of the children requests.
    children - the size requirements for each component.
    offsets - the offset from 0 for each child where the spans were allocated (determines placement of the span).
    spans - the span allocated for each child to make the total target span.
  - calculateAlignedPositions
```
public static void calculateAlignedPositions(int allocated,
                             SizeRequirements total,
                             SizeRequirements[] children,
                             int[] offsets,
                             int[] spans,
                             boolean normal)
```
    Creates a set of offset/span pairs specifying how to lay out a set of components with the specified alignments. The resulting span allocations will overlap, with each one fitting as well as possible into the given total allocation. This method requires that you specify the total amount of space to be allocated, the size requirements for each component to be placed (specified as an array of SizeRequirements), and the total size requirements of the set of components (only the alignment field of which is actually used) You can get the total size requirement by invoking getAlignedSizeRequirements. This method also requires a flag indicating whether normal or reverse alignment should be performed. With normal alignment the value 0.0f represents the left/top edge of the component to be aligned. With reverse alignment, 0.0f represents the right/bottom edge.
    
    Parameters:
    allocated - the total span to be allocated >= 0.
    total - the total of the children requests.
    children - the size requirements for each component.
    offsets - the offset from 0 for each child where the spans were allocated (determines placement of the span).
    spans - the span allocated for each child to make the total target span.
    normal - when true, the alignment value 0.0f means left/top; when false, it means right/bottom.
    Since:
    
    1.4
  - adjustSizes
```
public static int[] adjustSizes(int delta,
                SizeRequirements[] children)
```
    Adjust a specified array of sizes by a given amount.
    
    Parameters:
    delta - an int specifying the size difference
    children - an array of SizeRequirements objects
    
    Returns:
    an array of ints containing the final size for each item

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2015, Oracle and/or its affiliates. All rights reserved.

Class SizeRequirements

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

minimum

preferred

maximum

alignment

Constructor Detail

SizeRequirements

SizeRequirements

Method Detail

toString

getTiledSizeRequirements

getAlignedSizeRequirements

calculateTiledPositions

calculateTiledPositions

calculateAlignedPositions

calculateAlignedPositions

adjustSizes