The try...catch statement marks a block of statements to try, and specifies a response, should an exception be thrown.

Syntax

try {
   try_statements
}
[catch (exception_var_1 if condition_1) { // non-standard
   catch_statements_1
}]
...
[catch (exception_var_2) {
   catch_statements_2
}]
[finally {
   finally_statements
}]
try_statements
The statements to be executed.
catch_statements_1, catch_statements_2
Statements that are executed if an exception is thrown in the try block.
exception_var_1, exception_var_2
An identifier to hold an exception object for the associated catch clause.
condition_1
A conditional expression.
finally_statements
Statements that are executed after the try statement completes. These statements execute regardless of whether or not an exception was thrown or caught.

Description

The try statement consists of a try block, which contains one or more statements, and at least one catch clause or a finally clause, or both. That is, there are three forms of the try statement:

  1. try...catch
  2. try...finally
  3. try...catch...finally

A catch clause contain statements that specify what to do if an exception is thrown in the try block. That is, you want the try block to succeed, and if it does not succeed, you want control to pass to the catch block. If any statement within the try block (or in a function called from within the try block) throws an exception, control immediately shifts to the catch clause. If no exception is thrown in the try block, the catch clause is skipped.

The finally clause executes after the try block and catch clause(s) execute but before the statements following the try statement. It always executes, regardless of whether or not an exception was thrown or caught.

You can nest one or more try statements. If an inner try statement does not have a catch clause, the enclosing try statement's catch clause is entered.

You also use the try statement to handle JavaScript exceptions. See the JavaScript Guide for more information on JavaScript exceptions.

Unconditional catch clause

When a single, unconditional catch clause is used, the catch block is entered when any exception is thrown. For example, when the exception occurs in the following code, control transfers to the catch clause.

try {
   throw "myException"; // generates an exception
}
catch (e) {
   // statements to handle any exceptions
   logMyErrors(e); // pass exception object to error handler
}

Conditional catch clauses

Non-standard
This feature is non-standard and is not on a standards track. Do not use it on production sites facing the Web: it will not work for every user. There may also be large incompatibilities between implementations and the behavior may change in the future.

You can also use one or more conditional catch clauses to handle specific exceptions. In this case, the appropriate catch clause is entered when the specified exception is thrown. In the following example, code in the try block can potentially throw three exceptions: TypeError, RangeError, and EvalError. When an exception occurs, control transfers to the appropriate catch clause. If the exception is not one of the specified exceptions and an unconditional catch clause is found, control transfers to that catch clause.

If you use an unconditional catch clause with one or more conditional catch clauses, the unconditional catch clause must be specified last. Otherwise, the unconditional catch clause will intercept all types of exception before they can reach the conditional ones.

Reminder: this functionality is not part of the ECMAScript specification.

try {
    myroutine(); // may throw three types of exceptions
} catch (e if e instanceof TypeError) {
    // statements to handle TypeError exceptions
} catch (e if e instanceof RangeError) {
    // statements to handle RangeError exceptions
} catch (e if e instanceof EvalError) {
    // statements to handle EvalError exceptions
} catch (e) {
    // statements to handle any unspecified exceptions
    logMyErrors(e); // pass exception object to error handler
}

And here is how to do implement the same "Conditional catch clauses" using only simple JavaScript conforming to the ECMAScript specification (obviously it's more verbose, but works everywhere):

try {
    myroutine(); // may throw three types of exceptions
} catch (e) {
    if (e instanceof TypeError) {
        // statements to handle TypeError exceptions
    } else if (e instanceof RangeError) {
        // statements to handle RangeError exceptions
    } else if (e instanceof EvalError) {
        // statements to handle EvalError exceptions
    } else {
       // statements to handle any unspecified exceptions
       logMyErrors(e); // pass exception object to error handler
    }
}

The exception identifier

When an exception is thrown in the try block, exception_var (e.g. the e in catch (e)) holds the value specified by the throw statement. You can use this identifier to get information about the exception that was thrown.

This identifier is local to the catch clause. That is, it is created when the catch clause is entered, and after the catch clause finishes executing, the identifier is no longer available.

The finally clause

The finally clause contains statements to execute after the try block and catch clause(s) execute, but before the statements following the try statement. The finally clause executes regardless of whether or not an exception is thrown. If an exception is thrown, the statements in the finally clause execute even if no catch clause handles the exception.

You can use the finally clause to make your script fail gracefully when an exception occurs; for example, you may need to release a resource that your script has tied up. The following example opens a file and then executes statements that use the file (server-side JavaScript allows you to access files). If an exception is thrown while the file is open, the finally clause closes the file before the script fails. The code in finally also executes upon explicitly returning from try or catch block.

openMyFile()
try {
   // tie up a resource
   writeMyFile(theData);
}
finally {
   closeMyFile(); // always close the resource
}

Examples

Nested try-blocks

First let's see what happens with this:

try {
  try {
    throw new Error("oops");
  }
  finally {
    console.log("finally");
  }
}
catch (ex) {
  console.error("outer", ex.message);
}

// Output:
// "finally"
// "outer" "oops"

Now, if we already caught the exception in the inner try-block by adding a catch block

try {
  try {
    throw new Error("oops");
  }
  catch (ex) {
    console.error("inner", ex.message);
  }
  finally {
    console.log("finally");
  }
}
catch (ex) {
  console.error("outer", ex.message);
}

// Output:
// "inner" "oops"
// "finally"

And now, lets re-throw the error.

try {
  try {
    throw new Error("oops");
  }
  catch (ex) {
    console.error("inner", ex.message);
    throw ex;
  }
  finally {
    console.log("finally");
  }
}
catch (ex) {
  console.error("outer", ex.message);
}

// Output:
// "inner" "oops"
// "finally"
// "outer" "oops"

Any given exception will be caught only once by the nearest enclosing catch-block, unless it is re-thrown. Of course, any new exceptions raised in the "inner" block (because code in catch-block may do something that throws), will be caught by the "outer" block.

Returning from a finally block

If the finally block returns a value, this value becomes the return value of the entire try-catch-finally production, regardless of any return statements in the try and catch blocks. This includes exceptions thrown inside of the catch block:

try {
  try {
    throw new Error("oops");
  }
  catch (ex) {
    console.error("inner", ex.message);
    throw ex;
  }
  finally {
    console.log("finally");
    return;
  }
}
catch (ex) {
  console.error("outer", ex.message);
}

// Output:
// "inner" "oops"
// "finally"

The outer "oops" is not thrown because of the return in the finally block. The same would apply to any value returned from the catch block.

Specifications

Specification Status Comment
ECMAScript 3rd Edition (ECMA-262) Standard Initial definition. Implemented in JavaScript 1.4
ECMAScript 5.1 (ECMA-262)
The definition of 'try statement' in that specification.
Standard  
ECMAScript 2015 (6th Edition, ECMA-262)
The definition of 'try statement' in that specification.
Standard  
ECMAScript 2017 Draft (ECMA-262)
The definition of 'try statement' in that specification.
Draft Not part of the current ECMA-262 standard: Multiple catch clauses and conditional clauses (SpiderMonkey extension, JavaScript 1.5).

Browser compatibility

Feature Chrome Firefox (Gecko) Internet Explorer Opera Safari
Basic support (Yes) (Yes) (Yes) (Yes) (Yes)
Conditional clauses
(non-standard)
No support (Yes) No support No support No support
Feature Android Chrome for Android Firefox Mobile (Gecko) IE Mobile Opera Mobile Safari Mobile
Basic support (Yes) (Yes) (Yes) (Yes) (Yes) (Yes)
Conditional clauses
(non-standard)
No support No support (Yes) No support No support No support

See also

Document Tags and Contributors

 Last updated by: fscholz,