<link rel="stylesheet" href="../noscript1.34.1.css">

1.0.0[]Primitive Type u64

The 64-bit unsigned integer type.

See also the std::u64 module.

Methods

impl u64[src]

pub const fn min_value() -> u64[src]

Returns the smallest value that can be represented by this integer type.

Examples

Basic usage:

assert_eq!(u64::min_value(), 0);Run

pub const fn max_value() -> u64[src]

Returns the largest value that can be represented by this integer type.

Examples

Basic usage:

assert_eq!(u64::max_value(), 18446744073709551615);Run

pub fn from_str_radix(src: &str, radix: u32) -> Result<u64, ParseIntError>[src]

Converts a string slice in a given base to an integer.

The string is expected to be an optional + sign followed by digits. Leading and trailing whitespace represent an error. Digits are a subset of these characters, depending on radix:

  • 0-9
  • a-z
  • A-Z

Panics

This function panics if radix is not in the range from 2 to 36.

Examples

Basic usage:

assert_eq!(u64::from_str_radix("A", 16), Ok(10));Run

pub const fn count_ones(self) -> u32[src]

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

let n = 0b01001100u64;

assert_eq!(n.count_ones(), 3);Run

pub const fn count_zeros(self) -> u32[src]

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

assert_eq!(u64::max_value().count_zeros(), 0);Run

pub const fn leading_zeros(self) -> u32[src]

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

let n = u64::max_value() >> 2;

assert_eq!(n.leading_zeros(), 2);Run

pub const fn trailing_zeros(self) -> u32[src]

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

let n = 0b0101000u64;

assert_eq!(n.trailing_zeros(), 3);Run

pub const fn rotate_left(self, n: u32) -> u64[src]

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

let n = 0xaa00000000006e1u64;
let m = 0x6e10aa;

assert_eq!(n.rotate_left(12), m);Run

pub const fn rotate_right(self, n: u32) -> u64[src]

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

let n = 0x6e10aau64;
let m = 0xaa00000000006e1;

assert_eq!(n.rotate_right(12), m);Run

pub const fn swap_bytes(self) -> u64[src]

Reverses the byte order of the integer.

Examples

Basic usage:

let n = 0x1234567890123456u64;
let m = n.swap_bytes();

assert_eq!(m, 0x5634129078563412);Run

pub fn reverse_bits(self) -> u64[src]

🔬 This is a nightly-only experimental API. (reverse_bits #48763)

Reverses the bit pattern of the integer.

Examples

Basic usage:

#![feature(reverse_bits)]

let n = 0x1234567890123456u64;
let m = n.reverse_bits();

assert_eq!(m, 0x6a2c48091e6a2c48);Run

pub const fn from_be(x: u64) -> u64[src]

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

let n = 0x1Au64;

if cfg!(target_endian = "big") {
    assert_eq!(u64::from_be(n), n)
} else {
    assert_eq!(u64::from_be(n), n.swap_bytes())
}Run

pub const fn from_le(x: u64) -> u64[src]

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

let n = 0x1Au64;

if cfg!(target_endian = "little") {
    assert_eq!(u64::from_le(n), n)
} else {
    assert_eq!(u64::from_le(n), n.swap_bytes())
}Run

pub const fn to_be(self) -> u64[src]

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

let n = 0x1Au64;

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}Run

pub const fn to_le(self) -> u64[src]

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

let n = 0x1Au64;

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}Run

pub fn checked_add(self, rhs: u64) -> Option<u64>[src]

Checked integer addition. Computes self + rhs, returning None if overflow occurred.

Examples

Basic usage:

assert_eq!((u64::max_value() - 2).checked_add(1), Some(u64::max_value() - 1));
assert_eq!((u64::max_value() - 2).checked_add(3), None);Run

pub fn checked_sub(self, rhs: u64) -> Option<u64>[src]

Checked integer subtraction. Computes self - rhs, returning None if overflow occurred.

Examples

Basic usage:

assert_eq!(1u64.checked_sub(1), Some(0));
assert_eq!(0u64.checked_sub(1), None);Run

pub fn checked_mul(self, rhs: u64) -> Option<u64>[src]

Checked integer multiplication. Computes self * rhs, returning None if overflow occurred.

Examples

Basic usage:

assert_eq!(5u64.checked_mul(1), Some(5));
assert_eq!(u64::max_value().checked_mul(2), None);Run

pub fn checked_div(self, rhs: u64) -> Option<u64>[src]

Checked integer division. Computes self / rhs, returning None if rhs == 0.

Examples

Basic usage:

assert_eq!(128u64.checked_div(2), Some(64));
assert_eq!(1u64.checked_div(0), None);Run

pub fn checked_div_euclid(self, rhs: u64) -> Option<u64>[src]

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Checked Euclidean division. Computes self.div_euclid(rhs), returning None if rhs == 0.

Examples

Basic usage:

#![feature(euclidean_division)]
assert_eq!(128u64.checked_div_euclid(2), Some(64));
assert_eq!(1u64.checked_div_euclid(0), None);Run

pub fn checked_rem(self, rhs: u64) -> Option<u64>
1.7.0
[src]

Checked integer remainder. Computes self % rhs, returning None if rhs == 0.

Examples

Basic usage:

assert_eq!(5u64.checked_rem(2), Some(1));
assert_eq!(5u64.checked_rem(0), None);Run

pub fn checked_rem_euclid(self, rhs: u64) -> Option<u64>[src]

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Checked Euclidean modulo. Computes self.rem_euclid(rhs), returning None if rhs == 0.

Examples

Basic usage:

#![feature(euclidean_division)]
assert_eq!(5u64.checked_rem_euclid(2), Some(1));
assert_eq!(5u64.checked_rem_euclid(0), None);Run

pub fn checked_neg(self) -> Option<u64>
1.7.0
[src]

Checked negation. Computes -self, returning None unless self == 0.

Note that negating any positive integer will overflow.

Examples

Basic usage:

assert_eq!(0u64.checked_neg(), Some(0));
assert_eq!(1u64.checked_neg(), None);Run

pub fn checked_shl(self, rhs: u32) -> Option<u64>
1.7.0
[src]

Checked shift left. Computes self << rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

assert_eq!(0x1u64.checked_shl(4), Some(0x10));
assert_eq!(0x10u64.checked_shl(129), None);Run

pub fn checked_shr(self, rhs: u32) -> Option<u64>
1.7.0
[src]

Checked shift right. Computes self >> rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

assert_eq!(0x10u64.checked_shr(4), Some(0x1));
assert_eq!(0x10u64.checked_shr(129), None);Run

pub fn checked_pow(self, exp: u32) -> Option<u64>
1.34.0
[src]

Checked exponentiation. Computes self.pow(exp), returning None if overflow occurred.

Examples

Basic usage:

assert_eq!(2u64.checked_pow(5), Some(32));
assert_eq!(u64::max_value().checked_pow(2), None);Run

pub fn saturating_add(self, rhs: u64) -> u64[src]

Saturating integer addition. Computes self + rhs, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

assert_eq!(100u64.saturating_add(1), 101);
assert_eq!(200u8.saturating_add(127), 255);Run

pub fn saturating_sub(self, rhs: u64) -> u64[src]

Saturating integer subtraction. Computes self - rhs, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

assert_eq!(100u64.saturating_sub(27), 73);
assert_eq!(13u64.saturating_sub(127), 0);Run

pub fn saturating_mul(self, rhs: u64) -> u64
1.7.0
[src]

Saturating integer multiplication. Computes self * rhs, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

use std::u64;

assert_eq!(2u64.saturating_mul(10), 20);
assert_eq!((u64::MAX).saturating_mul(10), u64::MAX);Run

pub fn saturating_pow(self, exp: u32) -> u64
1.34.0
[src]

Saturating integer exponentiation. Computes self.pow(exp), saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

use std::u64;

assert_eq!(4u64.saturating_pow(3), 64);
assert_eq!(u64::MAX.saturating_pow(2), u64::MAX);Run

pub const fn wrapping_add(self, rhs: u64) -> u64[src]

Wrapping (modular) addition. Computes self + rhs, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(200u64.wrapping_add(55), 255);
assert_eq!(200u64.wrapping_add(u64::max_value()), 199);Run

pub const fn wrapping_sub(self, rhs: u64) -> u64[src]

Wrapping (modular) subtraction. Computes self - rhs, wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(100u64.wrapping_sub(100), 0);
assert_eq!(100u64.wrapping_sub(u64::max_value()), 101);Run

pub const fn wrapping_mul(self, rhs: u64) -> u64[src]

Wrapping (modular) multiplication. Computes self * rhs, wrapping around at the boundary of the type.

Examples

Basic usage:

Please note that this example is shared between integer types. Which explains why u8 is used here.

assert_eq!(10u8.wrapping_mul(12), 120);
assert_eq!(25u8.wrapping_mul(12), 44);Run

pub fn wrapping_div(self, rhs: u64) -> u64
1.2.0
[src]

Wrapping (modular) division. Computes self / rhs. Wrapped division on unsigned types is just normal division. There's no way wrapping could ever happen. This function exists, so that all operations are accounted for in the wrapping operations.

Examples

Basic usage:

assert_eq!(100u64.wrapping_div(10), 10);Run

pub fn wrapping_div_euclid(self, rhs: u64) -> u64[src]

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Wrapping Euclidean division. Computes self.div_euclid(rhs). Wrapped division on unsigned types is just normal division. There's no way wrapping could ever happen. This function exists, so that all operations are accounted for in the wrapping operations. Since, for the positive integers, all common definitions of division are equal, this is exactly equal to self.wrapping_div(rhs).

Examples

Basic usage:

#![feature(euclidean_division)]
assert_eq!(100u64.wrapping_div_euclid(10), 10);Run

pub fn wrapping_rem(self, rhs: u64) -> u64
1.2.0
[src]

Wrapping (modular) remainder. Computes self % rhs. Wrapped remainder calculation on unsigned types is just the regular remainder calculation. There's no way wrapping could ever happen. This function exists, so that all operations are accounted for in the wrapping operations.

Examples

Basic usage:

assert_eq!(100u64.wrapping_rem(10), 0);Run

pub fn wrapping_rem_euclid(self, rhs: u64) -> u64[src]

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Wrapping Euclidean modulo. Computes self.rem_euclid(rhs). Wrapped modulo calculation on unsigned types is just the regular remainder calculation. There's no way wrapping could ever happen. This function exists, so that all operations are accounted for in the wrapping operations. Since, for the positive integers, all common definitions of division are equal, this is exactly equal to self.wrapping_rem(rhs).

Examples

Basic usage:

#![feature(euclidean_division)]
assert_eq!(100u64.wrapping_rem_euclid(10), 0);Run

pub const fn wrapping_neg(self) -> u64
1.2.0
[src]

Wrapping (modular) negation. Computes -self, wrapping around at the boundary of the type.

Since unsigned types do not have negative equivalents all applications of this function will wrap (except for -0). For values smaller than the corresponding signed type's maximum the result is the same as casting the corresponding signed value. Any larger values are equivalent to MAX + 1 - (val - MAX - 1) where MAX is the corresponding signed type's maximum.

Examples

Basic usage:

Please note that this example is shared between integer types. Which explains why i8 is used here.

assert_eq!(100i8.wrapping_neg(), -100);
assert_eq!((-128i8).wrapping_neg(), -128);Run

pub const fn wrapping_shl(self, rhs: u32) -> u64
1.2.0
[src]

Panic-free bitwise shift-left; yields self << mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-left; the RHS of a wrapping shift-left is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_left function, which may be what you want instead.

Examples

Basic usage:

assert_eq!(1u64.wrapping_shl(7), 128);
assert_eq!(1u64.wrapping_shl(128), 1);Run

pub const fn wrapping_shr(self, rhs: u32) -> u64
1.2.0
[src]

Panic-free bitwise shift-right; yields self >> mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-right; the RHS of a wrapping shift-right is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_right function, which may be what you want instead.

Examples

Basic usage:

assert_eq!(128u64.wrapping_shr(7), 1);
assert_eq!(128u64.wrapping_shr(128), 128);Run

pub fn wrapping_pow(self, exp: u32) -> u64
1.34.0
[src]

Wrapping (modular) exponentiation. Computes self.pow(exp), wrapping around at the boundary of the type.

Examples

Basic usage:

assert_eq!(3u64.wrapping_pow(5), 243);
assert_eq!(3u8.wrapping_pow(6), 217);Run

pub const fn overflowing_add(self, rhs: u64) -> (u64, bool)
1.7.0
[src]

Calculates self + rhs

Returns a tuple of the addition along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

use std::u64;

assert_eq!(5u64.overflowing_add(2), (7, false));
assert_eq!(u64::MAX.overflowing_add(1), (0, true));Run

pub const fn overflowing_sub(self, rhs: u64) -> (u64, bool)
1.7.0
[src]

Calculates self - rhs

Returns a tuple of the subtraction along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

use std::u64;

assert_eq!(5u64.overflowing_sub(2), (3, false));
assert_eq!(0u64.overflowing_sub(1), (u64::MAX, true));Run

pub const fn overflowing_mul(self, rhs: u64) -> (u64, bool)
1.7.0
[src]

Calculates the multiplication of self and rhs.

Returns a tuple of the multiplication along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage:

Please note that this example is shared between integer types. Which explains why u32 is used here.

assert_eq!(5u32.overflowing_mul(2), (10, false));
assert_eq!(1_000_000_000u32.overflowing_mul(10), (1410065408, true));Run

pub fn overflowing_div(self, rhs: u64) -> (u64, bool)
1.7.0
[src]

Calculates the divisor when self is divided by rhs.

Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would occur. Note that for unsigned integers overflow never occurs, so the second value is always false.

Panics

This function will panic if rhs is 0.

Examples

Basic usage

assert_eq!(5u64.overflowing_div(2), (2, false));Run

pub fn overflowing_div_euclid(self, rhs: u64) -> (u64, bool)[src]

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Calculates the quotient of Euclidean division self.div_euclid(rhs).

Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would occur. Note that for unsigned integers overflow never occurs, so the second value is always false. Since, for the positive integers, all common definitions of division are equal, this is exactly equal to self.overflowing_div(rhs).

Panics

This function will panic if rhs is 0.

Examples

Basic usage

#![feature(euclidean_division)]
assert_eq!(5u64.overflowing_div_euclid(2), (2, false));Run

pub fn overflowing_rem(self, rhs: u64) -> (u64, bool)
1.7.0
[src]

Calculates the remainder when self is divided by rhs.

Returns a tuple of the remainder after dividing along with a boolean indicating whether an arithmetic overflow would occur. Note that for unsigned integers overflow never occurs, so the second value is always false.

Panics

This function will panic if rhs is 0.

Examples

Basic usage

assert_eq!(5u64.overflowing_rem(2), (1, false));Run

pub fn overflowing_rem_euclid(self, rhs: u64) -> (u64, bool)[src]

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Calculates the remainder self.rem_euclid(rhs) as if by Euclidean division.

Returns a tuple of the modulo after dividing along with a boolean indicating whether an arithmetic overflow would occur. Note that for unsigned integers overflow never occurs, so the second value is always false. Since, for the positive integers, all common definitions of division are equal, this operation is exactly equal to self.overflowing_rem(rhs).

Panics

This function will panic if rhs is 0.

Examples

Basic usage

#![feature(euclidean_division)]
assert_eq!(5u64.overflowing_rem_euclid(2), (1, false));Run

pub const fn overflowing_neg(self) -> (u64, bool)
1.7.0
[src]

Negates self in an overflowing fashion.

Returns !self + 1 using wrapping operations to return the value that represents the negation of this unsigned value. Note that for positive unsigned values overflow always occurs, but negating 0 does not overflow.

Examples

Basic usage

assert_eq!(0u64.overflowing_neg(), (0, false));
assert_eq!(2u64.overflowing_neg(), (-2i32 as u64, true));Run

pub const fn overflowing_shl(self, rhs: u32) -> (u64, bool)
1.7.0
[src]

Shifts self left by rhs bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Examples

Basic usage

assert_eq!(0x1u64.overflowing_shl(4), (0x10, false));
assert_eq!(0x1u64.overflowing_shl(132), (0x10, true));Run

pub const fn overflowing_shr(self, rhs: u32) -> (u64, bool)
1.7.0
[src]

Shifts self right by rhs bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Examples

Basic usage

assert_eq!(0x10u64.overflowing_shr(4), (0x1, false));
assert_eq!(0x10u64.overflowing_shr(132), (0x1, true));Run

pub fn overflowing_pow(self, exp: u32) -> (u64, bool)
1.34.0
[src]

Raises self to the power of exp, using exponentiation by squaring.

Returns a tuple of the exponentiation along with a bool indicating whether an overflow happened.

Examples

Basic usage:

assert_eq!(3u64.overflowing_pow(5), (243, false));
assert_eq!(3u8.overflowing_pow(6), (217, true));Run

pub fn pow(self, exp: u32) -> u64[src]

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

assert_eq!(2u64.pow(5), 32);Run

pub fn div_euclid(self, rhs: u64) -> u64[src]

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Performs Euclidean division.

Since, for the positive integers, all common definitions of division are equal, this is exactly equal to self / rhs.

Examples

Basic usage:

#![feature(euclidean_division)]
assert_eq!(7u64.div_euclid(4), 1); // or any other integer typeRun

pub fn rem_euclid(self, rhs: u64) -> u64[src]

🔬 This is a nightly-only experimental API. (euclidean_division #49048)

Calculates the least remainder of self (mod rhs).

Since, for the positive integers, all common definitions of division are equal, this is exactly equal to self % rhs.

Examples

Basic usage:

#![feature(euclidean_division)]
assert_eq!(7u64.rem_euclid(4), 3); // or any other integer typeRun

pub fn is_power_of_two(self) -> bool[src]

Returns true if and only if self == 2^k for some k.

Examples

Basic usage:

assert!(16u64.is_power_of_two());
assert!(!10u64.is_power_of_two());Run

pub fn next_power_of_two(self) -> u64[src]

Returns the smallest power of two greater than or equal to self.

When return value overflows (i.e., self > (1 << (N-1)) for type uN), it panics in debug mode and return value is wrapped to 0 in release mode (the only situation in which method can return 0).

Examples

Basic usage:

assert_eq!(2u64.next_power_of_two(), 2);
assert_eq!(3u64.next_power_of_two(), 4);Run

pub fn checked_next_power_of_two(self) -> Option<u64>[src]

Returns the smallest power of two greater than or equal to n. If the next power of two is greater than the type's maximum value, None is returned, otherwise the power of two is wrapped in Some.

Examples

Basic usage:

assert_eq!(2u64.checked_next_power_of_two(), Some(2));
assert_eq!(3u64.checked_next_power_of_two(), Some(4));
assert_eq!(u64::max_value().checked_next_power_of_two(), None);Run

pub fn wrapping_next_power_of_two(self) -> u64[src]

🔬 This is a nightly-only experimental API. (wrapping_next_power_of_two #32463)

needs decision on wrapping behaviour

Returns the smallest power of two greater than or equal to n. If the next power of two is greater than the type's maximum value, the return value is wrapped to 0.

Examples

Basic usage:

#![feature(wrapping_next_power_of_two)]

assert_eq!(2u64.wrapping_next_power_of_two(), 2);
assert_eq!(3u64.wrapping_next_power_of_two(), 4);
assert_eq!(u64::max_value().wrapping_next_power_of_two(), 0);Run

pub fn to_be_bytes(self) -> [u8; 8]
1.32.0
[src]

Return the memory representation of this integer as a byte array in big-endian (network) byte order.

Examples

let bytes = 0x1234567890123456u64.to_be_bytes();
assert_eq!(bytes, [0x12, 0x34, 0x56, 0x78, 0x90, 0x12, 0x34, 0x56]);Run

pub fn to_le_bytes(self) -> [u8; 8]
1.32.0
[src]

Return the memory representation of this integer as a byte array in little-endian byte order.

Examples

let bytes = 0x1234567890123456u64.to_le_bytes();
assert_eq!(bytes, [0x56, 0x34, 0x12, 0x90, 0x78, 0x56, 0x34, 0x12]);Run

pub fn to_ne_bytes(self) -> [u8; 8]
1.32.0
[src]

Return the memory representation of this integer as a byte array in native byte order.

As the target platform's native endianness is used, portable code should use to_be_bytes or to_le_bytes, as appropriate, instead.

Examples

let bytes = 0x1234567890123456u64.to_ne_bytes();
assert_eq!(bytes, if cfg!(target_endian = "big") {
        [0x12, 0x34, 0x56, 0x78, 0x90, 0x12, 0x34, 0x56]
    } else {
        [0x56, 0x34, 0x12, 0x90, 0x78, 0x56, 0x34, 0x12]
    });Run

pub fn from_be_bytes(bytes: [u8; 8]) -> u64
1.32.0
[src]

Create an integer value from its representation as a byte array in big endian.

Examples

let value = u64::from_be_bytes([0x12, 0x34, 0x56, 0x78, 0x90, 0x12, 0x34, 0x56]);
assert_eq!(value, 0x1234567890123456);Run

When starting from a slice rather than an array, fallible conversion APIs can be used:

use std::convert::TryInto;

fn read_be_u64(input: &mut &[u8]) -> u64 {
    let (int_bytes, rest) = input.split_at(std::mem::size_of::<u64>());
    *input = rest;
    u64::from_be_bytes(int_bytes.try_into().unwrap())
}Run

pub fn from_le_bytes(bytes: [u8; 8]) -> u64
1.32.0
[src]

Create an integer value from its representation as a byte array in little endian.

Examples

let value = u64::from_le_bytes([0x56, 0x34, 0x12, 0x90, 0x78, 0x56, 0x34, 0x12]);
assert_eq!(value, 0x1234567890123456);Run

When starting from a slice rather than an array, fallible conversion APIs can be used:

use std::convert::TryInto;

fn read_be_u64(input: &mut &[u8]) -> u64 {
    let (int_bytes, rest) = input.split_at(std::mem::size_of::<u64>());
    *input = rest;
    u64::from_be_bytes(int_bytes.try_into().unwrap())
}Run

pub fn from_ne_bytes(bytes: [u8; 8]) -> u64
1.32.0
[src]

Create an integer value from its memory representation as a byte array in native endianness.

As the target platform's native endianness is used, portable code likely wants to use from_be_bytes or from_le_bytes, as appropriate instead.

Examples

let value = u64::from_ne_bytes(if cfg!(target_endian = "big") {
        [0x12, 0x34, 0x56, 0x78, 0x90, 0x12, 0x34, 0x56]
    } else {
        [0x56, 0x34, 0x12, 0x90, 0x78, 0x56, 0x34, 0x12]
    });
assert_eq!(value, 0x1234567890123456);Run

When starting from a slice rather than an array, fallible conversion APIs can be used:

use std::convert::TryInto;

fn read_be_u64(input: &mut &[u8]) -> u64 {
    let (int_bytes, rest) = input.split_at(std::mem::size_of::<u64>());
    *input = rest;
    u64::from_be_bytes(int_bytes.try_into().unwrap())
}Run

Trait Implementations

impl<'a> Div<&'a u64> for u64[src]

type Output = <u64 as Div<u64>>::Output

The resulting type after applying the / operator.

impl<'a> Div<u64> for &'a u64[src]

type Output = <u64 as Div<u64>>::Output

The resulting type after applying the / operator.

impl Div<u64> for u64[src]

This operation rounds towards zero, truncating any fractional part of the exact result.

type Output = u64

The resulting type after applying the / operator.

impl<'a, 'b> Div<&'a u64> for &'b u64[src]

type Output = <u64 as Div<u64>>::Output

The resulting type after applying the / operator.

impl BitXorAssign<u64> for u64
1.8.0
[src]

impl<'a> BitXorAssign<&'a u64> for u64
1.22.0
[src]

impl LowerHex for u64[src]

impl<'a> BitOrAssign<&'a u64> for u64
1.22.0
[src]

impl BitOrAssign<u64> for u64
1.8.0
[src]

impl BitAndAssign<u64> for u64
1.8.0
[src]

impl<'a> BitAndAssign<&'a u64> for u64
1.22.0
[src]

impl Display for u64[src]

impl<'a> Add<&'a u64> for u64[src]

type Output = <u64 as Add<u64>>::Output

The resulting type after applying the + operator.

impl<'a, 'b> Add<&'a u64> for &'b u64[src]

type Output = <u64 as Add<u64>>::Output

The resulting type after applying the + operator.

impl Add<u64> for u64[src]

type Output = u64

The resulting type after applying the + operator.

impl<'a> Add<u64> for &'a u64[src]

type Output = <u64 as Add<u64>>::Output

The resulting type after applying the + operator.

impl<'a> BitOr<u64> for &'a u64[src]

type Output = <u64 as BitOr<u64>>::Output

The resulting type after applying the | operator.

impl<'a, 'b> BitOr<&'a u64> for &'b u64[src]

type Output = <u64 as BitOr<u64>>::Output

The resulting type after applying the | operator.

impl<'a> BitOr<&'a u64> for u64[src]

type Output = <u64 as BitOr<u64>>::Output

The resulting type after applying the | operator.

impl BitOr<u64> for u64[src]

type Output = u64

The resulting type after applying the | operator.

impl<'a> RemAssign<&'a u64> for u64
1.22.0
[src]

impl RemAssign<u64> for u64
1.8.0
[src]

impl DivAssign<u64> for u64
1.8.0
[src]

impl<'a> DivAssign<&'a u64> for u64
1.22.0
[src]

impl<'a> MulAssign<&'a u64> for u64
1.22.0
[src]

impl MulAssign<u64> for u64
1.8.0
[src]

impl SubAssign<u64> for u64
1.8.0
[src]

impl<'a> SubAssign<&'a u64> for u64
1.22.0
[src]

impl Clone for u64[src]

fn clone_from(&mut self, source: &Self)[src]

Performs copy-assignment from source. Read more

impl<'a> AddAssign<&'a u64> for u64
1.22.0
[src]

impl AddAssign<u64> for u64
1.8.0
[src]

impl PartialOrd<u64> for u64[src]

impl Step for u64[src]

impl ShrAssign<u64> for u64
1.8.0
[src]

impl<'a> ShrAssign<&'a u128> for u64
1.22.0
[src]

impl ShrAssign<isize> for u64
1.8.0
[src]

impl<'a> ShrAssign<&'a i32> for u64
1.22.0
[src]

impl<'a> ShrAssign<&'a u8> for u64
1.22.0
[src]

impl ShrAssign<i8> for u64
1.8.0
[src]

impl ShrAssign<u16> for u64
1.8.0
[src]

impl<'a> ShrAssign<&'a i8> for u64
1.22.0
[src]

impl ShrAssign<i16> for u64
1.8.0
[src]

impl ShrAssign<u32> for u64
1.8.0
[src]

impl<'a> ShrAssign<&'a usize> for u64
1.22.0
[src]

impl ShrAssign<u8> for u64
1.8.0
[src]

impl<'a> ShrAssign<&'a isize> for u64
1.22.0
[src]

impl<'a> ShrAssign<&'a u32> for u64
1.22.0
[src]

impl ShrAssign<i128> for u64
1.8.0
[src]

impl<'a> ShrAssign<&'a u64> for u64
1.22.0
[src]

impl ShrAssign<usize> for u64
1.8.0
[src]

impl<'a> ShrAssign<&'a i128> for u64
1.22.0
[src]

impl ShrAssign<i64> for u64
1.8.0
[src]

impl<'a> ShrAssign<&'a i16> for u64
1.22.0
[src]

impl ShrAssign<u128> for u64
1.8.0
[src]

impl ShrAssign<i32> for u64
1.8.0
[src]

impl<'a> ShrAssign<&'a i64> for u64
1.22.0
[src]

impl<'a> ShrAssign<&'a u16> for u64
1.22.0
[src]

impl Ord for u64[src]

fn max(self, other: Self) -> Self
1.21.0
[src]

Compares and returns the maximum of two values. Read more

fn min(self, other: Self) -> Self
1.21.0
[src]

Compares and returns the minimum of two values. Read more

impl Binary for u64[src]

impl<'a, 'b> Sub<&'a u64> for &'b u64[src]

type Output = <u64 as Sub<u64>>::Output

The resulting type after applying the - operator.

impl<'a> Sub<&'a u64> for u64[src]

type Output = <u64 as Sub<u64>>::Output

The resulting type after applying the - operator.

impl Sub<u64> for u64[src]

type Output = u64

The resulting type after applying the - operator.

impl<'a> Sub<u64> for &'a u64[src]

type Output = <u64 as Sub<u64>>::Output

The resulting type after applying the - operator.

impl Eq for u64[src]

impl Debug for u64[src]

impl TryFrom<usize> for u64
1.34.0
[src]

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(value: usize) -> Result<u64, <u64 as TryFrom<usize>>::Error>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i64> for u64
1.34.0
[src]

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: i64) -> Result<u64, TryFromIntError>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i8> for u64
1.34.0
[src]

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: i8) -> Result<u64, TryFromIntError>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<u128> for u64
1.34.0
[src]

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: u128) -> Result<u64, TryFromIntError>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<isize> for u64
1.34.0
[src]

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: isize) -> Result<u64, TryFromIntError>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i16> for u64
1.34.0
[src]

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: i16) -> Result<u64, TryFromIntError>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i128> for u64
1.34.0
[src]

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: i128) -> Result<u64, TryFromIntError>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl TryFrom<i32> for u64
1.34.0
[src]

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(u: i32) -> Result<u64, TryFromIntError>[src]

Try to create the target number type from a source number type. This returns an error if the source value is outside of the range of the target type.

impl PartialEq<u64> for u64[src]

impl<'a, 'b> Shr<&'a u32> for &'b u64[src]

type Output = <u64 as Shr<u32>>::Output

The resulting type after applying the >> operator.

impl Shr<i16> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl<'a> Shr<i8> for &'a u64[src]

type Output = <u64 as Shr<i8>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a usize> for &'b u64[src]

type Output = <u64 as Shr<usize>>::Output

The resulting type after applying the >> operator.

impl Shr<i8> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl Shr<u32> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl<'a> Shr<i128> for &'a u64[src]

type Output = <u64 as Shr<i128>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<&'a u16> for u64[src]

type Output = <u64 as Shr<u16>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<&'a i16> for u64[src]

type Output = <u64 as Shr<i16>>::Output

The resulting type after applying the >> operator.

impl Shr<i32> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl<'a> Shr<&'a u128> for u64[src]

type Output = <u64 as Shr<u128>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a u8> for &'b u64[src]

type Output = <u64 as Shr<u8>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<&'a u32> for u64[src]

type Output = <u64 as Shr<u32>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<u64> for &'a u64[src]

type Output = <u64 as Shr<u64>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a i32> for &'b u64[src]

type Output = <u64 as Shr<i32>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<u8> for &'a u64[src]

type Output = <u64 as Shr<u8>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a u64> for &'b u64[src]

type Output = <u64 as Shr<u64>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<&'a i8> for u64[src]

type Output = <u64 as Shr<i8>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a i128> for &'b u64[src]

type Output = <u64 as Shr<i128>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<u16> for &'a u64[src]

type Output = <u64 as Shr<u16>>::Output

The resulting type after applying the >> operator.

impl Shr<u8> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl<'a> Shr<&'a i128> for u64[src]

type Output = <u64 as Shr<i128>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<&'a i32> for u64[src]

type Output = <u64 as Shr<i32>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<u32> for &'a u64[src]

type Output = <u64 as Shr<u32>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a isize> for &'b u64[src]

type Output = <u64 as Shr<isize>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a i64> for &'b u64[src]

type Output = <u64 as Shr<i64>>::Output

The resulting type after applying the >> operator.

impl Shr<i64> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a u128> for &'b u64[src]

type Output = <u64 as Shr<u128>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<i64> for &'a u64[src]

type Output = <u64 as Shr<i64>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<&'a i64> for u64[src]

type Output = <u64 as Shr<i64>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<&'a isize> for u64[src]

type Output = <u64 as Shr<isize>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<i16> for &'a u64[src]

type Output = <u64 as Shr<i16>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a i16> for &'b u64[src]

type Output = <u64 as Shr<i16>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<&'a u64> for u64[src]

type Output = <u64 as Shr<u64>>::Output

The resulting type after applying the >> operator.

impl Shr<u16> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl<'a> Shr<u128> for &'a u64[src]

type Output = <u64 as Shr<u128>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a u16> for &'b u64[src]

type Output = <u64 as Shr<u16>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<isize> for &'a u64[src]

type Output = <u64 as Shr<isize>>::Output

The resulting type after applying the >> operator.

impl<'a, 'b> Shr<&'a i8> for &'b u64[src]

type Output = <u64 as Shr<i8>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<i32> for &'a u64[src]

type Output = <u64 as Shr<i32>>::Output

The resulting type after applying the >> operator.

impl Shr<usize> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl<'a> Shr<usize> for &'a u64[src]

type Output = <u64 as Shr<usize>>::Output

The resulting type after applying the >> operator.

impl<'a> Shr<&'a usize> for u64[src]

type Output = <u64 as Shr<usize>>::Output

The resulting type after applying the >> operator.

impl Shr<i128> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl Shr<u128> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl Shr<isize> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl Shr<u64> for u64[src]

type Output = u64

The resulting type after applying the >> operator.

impl<'a> Shr<&'a u8> for u64[src]

type Output = <u64 as Shr<u8>>::Output

The resulting type after applying the >> operator.

impl<'a> BitXor<u64> for &'a u64[src]

type Output = <u64 as BitXor<u64>>::Output

The resulting type after applying the ^ operator.

impl<'a, 'b> BitXor<&'a u64> for &'b u64[src]

type Output = <u64 as BitXor<u64>>::Output

The resulting type after applying the ^ operator.

impl BitXor<u64> for u64[src]

type Output = u64

The resulting type after applying the ^ operator.

impl<'a> BitXor<&'a u64> for u64[src]

type Output = <u64 as BitXor<u64>>::Output

The resulting type after applying the ^ operator.

impl Not for u64[src]

type Output = u64

The resulting type after applying the ! operator.

impl<'_> Not for &'_ u64[src]

type Output = <u64 as Not>::Output

The resulting type after applying the ! operator.

impl<'a> Product<&'a u64> for u64
1.12.0
[src]

impl Product<u64> for u64
1.12.0
[src]

impl Copy for u64[src]

impl<'a, 'b> Rem<&'a u64> for &'b u64[src]

type Output = <u64 as Rem<u64>>::Output

The resulting type after applying the % operator.

impl<'a> Rem<u64> for &'a u64[src]

type Output = <u64 as Rem<u64>>::Output

The resulting type after applying the % operator.

impl<'a> Rem<&'a u64> for u64[src]

type Output = <u64 as Rem<u64>>::Output

The resulting type after applying the % operator.

impl Rem<u64> for u64[src]

This operation satisfies n % d == n - (n / d) * d. The result has the same sign as the left operand.

type Output = u64

The resulting type after applying the % operator.

impl UpperHex for u64[src]

impl Mul<u64> for u64[src]

type Output = u64

The resulting type after applying the * operator.

impl<'a> Mul<u64> for &'a u64[src]

type Output = <u64 as Mul<u64>>::Output

The resulting type after applying the * operator.

impl<'a, 'b> Mul<&'a u64> for &'b u64[src]

type Output = <u64 as Mul<u64>>::Output

The resulting type after applying the * operator.

impl<'a> Mul<&'a u64> for u64[src]

type Output = <u64 as Mul<u64>>::Output

The resulting type after applying the * operator.

impl Octal for u64[src]

impl<'a> Shl<i32> for &'a u64[src]

type Output = <u64 as Shl<i32>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<&'a i128> for u64[src]

type Output = <u64 as Shl<i128>>::Output

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a i8> for &'b u64[src]

type Output = <u64 as Shl<i8>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<i8> for &'a u64[src]

type Output = <u64 as Shl<i8>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<&'a u64> for u64[src]

type Output = <u64 as Shl<u64>>::Output

The resulting type after applying the << operator.

impl Shl<i64> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a> Shl<&'a i64> for u64[src]

type Output = <u64 as Shl<i64>>::Output

The resulting type after applying the << operator.

impl Shl<usize> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a> Shl<i64> for &'a u64[src]

type Output = <u64 as Shl<i64>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<i16> for &'a u64[src]

type Output = <u64 as Shl<i16>>::Output

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a u8> for &'b u64[src]

type Output = <u64 as Shl<u8>>::Output

The resulting type after applying the << operator.

impl Shl<i16> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a i64> for &'b u64[src]

type Output = <u64 as Shl<i64>>::Output

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a u32> for &'b u64[src]

type Output = <u64 as Shl<u32>>::Output

The resulting type after applying the << operator.

impl Shl<i8> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a> Shl<usize> for &'a u64[src]

type Output = <u64 as Shl<usize>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<u64> for &'a u64[src]

type Output = <u64 as Shl<u64>>::Output

The resulting type after applying the << operator.

impl Shl<u16> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a> Shl<&'a u8> for u64[src]

type Output = <u64 as Shl<u8>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<&'a usize> for u64[src]

type Output = <u64 as Shl<usize>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<&'a i32> for u64[src]

type Output = <u64 as Shl<i32>>::Output

The resulting type after applying the << operator.

impl Shl<isize> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a i16> for &'b u64[src]

type Output = <u64 as Shl<i16>>::Output

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a i32> for &'b u64[src]

type Output = <u64 as Shl<i32>>::Output

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a isize> for &'b u64[src]

type Output = <u64 as Shl<isize>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<&'a isize> for u64[src]

type Output = <u64 as Shl<isize>>::Output

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a i128> for &'b u64[src]

type Output = <u64 as Shl<i128>>::Output

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a u16> for &'b u64[src]

type Output = <u64 as Shl<u16>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<&'a i8> for u64[src]

type Output = <u64 as Shl<i8>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<u32> for &'a u64[src]

type Output = <u64 as Shl<u32>>::Output

The resulting type after applying the << operator.

impl Shl<u64> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a u128> for &'b u64[src]

type Output = <u64 as Shl<u128>>::Output

The resulting type after applying the << operator.

impl Shl<u32> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a> Shl<&'a i16> for u64[src]

type Output = <u64 as Shl<i16>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<&'a u16> for u64[src]

type Output = <u64 as Shl<u16>>::Output

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a u64> for &'b u64[src]

type Output = <u64 as Shl<u64>>::Output

The resulting type after applying the << operator.

impl Shl<i128> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl Shl<u128> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl Shl<u8> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a> Shl<u8> for &'a u64[src]

type Output = <u64 as Shl<u8>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<u128> for &'a u64[src]

type Output = <u64 as Shl<u128>>::Output

The resulting type after applying the << operator.

impl Shl<i32> for u64[src]

type Output = u64

The resulting type after applying the << operator.

impl<'a> Shl<u16> for &'a u64[src]

type Output = <u64 as Shl<u16>>::Output

The resulting type after applying the << operator.

impl<'a, 'b> Shl<&'a usize> for &'b u64[src]

type Output = <u64 as Shl<usize>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<&'a u128> for u64[src]

type Output = <u64 as Shl<u128>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<isize> for &'a u64[src]

type Output = <u64 as Shl<isize>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<&'a u32> for u64[src]

type Output = <u64 as Shl<u32>>::Output

The resulting type after applying the << operator.

impl<'a> Shl<i128> for &'a u64[src]

type Output = <u64 as Shl<i128>>::Output

The resulting type after applying the << operator.

impl From<bool> for u64
1.28.0
[src]

Converts a bool to a u64. The resulting value is 0 for false and 1 for true values.

Examples

assert_eq!(u64::from(true), 1);
assert_eq!(u64::from(false), 0);Run

impl From<u16> for u64
1.5.0
[src]

Converts u16 to u64 losslessly.

impl From<NonZeroU64> for u64
1.31.0
[src]

impl From<u32> for u64
1.5.0
[src]

Converts u32 to u64 losslessly.

impl From<u8> for u64
1.5.0
[src]

Converts u8 to u64 losslessly.

impl Default for u64[src]

fn default() -> u64[src]

Returns the default value of 0

impl BitAnd<u64> for u64[src]

type Output = u64

The resulting type after applying the & operator.

impl<'a> BitAnd<&'a u64> for u64[src]

type Output = <u64 as BitAnd<u64>>::Output

The resulting type after applying the & operator.

impl<'a, 'b> BitAnd<&'a u64> for &'b u64[src]

type Output = <u64 as BitAnd<u64>>::Output

The resulting type after applying the & operator.

impl<'a> BitAnd<u64> for &'a u64[src]

type Output = <u64 as BitAnd<u64>>::Output

The resulting type after applying the & operator.

impl Hash for u64[src]

impl FromStr for u64[src]

type Err = ParseIntError

The associated error which can be returned from parsing.

impl Sum<u64> for u64
1.12.0
[src]

impl<'a> Sum<&'a u64> for u64
1.12.0
[src]

impl ShlAssign<i16> for u64
1.8.0
[src]

impl ShlAssign<i8> for u64
1.8.0
[src]

impl ShlAssign<u128> for u64
1.8.0
[src]

impl ShlAssign<u8> for u64
1.8.0
[src]

impl ShlAssign<u32> for u64
1.8.0
[src]

impl ShlAssign<i64> for u64
1.8.0
[src]

impl ShlAssign<usize> for u64
1.8.0
[src]

impl ShlAssign<i32> for u64
1.8.0
[src]

impl ShlAssign<u16> for u64
1.8.0
[src]

impl<'a> ShlAssign<&'a i8> for u64
1.22.0
[src]

impl<'a> ShlAssign<&'a i16> for u64
1.22.0
[src]

impl ShlAssign<i128> for u64
1.8.0
[src]

impl<'a> ShlAssign<&'a usize> for u64
1.22.0
[src]

impl<'a> ShlAssign<&'a isize> for u64
1.22.0
[src]

impl<'a> ShlAssign<&'a i64> for u64
1.22.0
[src]

impl<'a> ShlAssign<&'a u64> for u64
1.22.0
[src]

impl<'a> ShlAssign<&'a u8> for u64
1.22.0
[src]

impl<'a> ShlAssign<&'a i128> for u64
1.22.0
[src]

impl ShlAssign<u64> for u64
1.8.0
[src]

impl<'a> ShlAssign<&'a u32> for u64
1.22.0
[src]

impl<'a> ShlAssign<&'a u128> for u64
1.22.0
[src]

impl<'a> ShlAssign<&'a i32> for u64
1.22.0
[src]

impl ShlAssign<isize> for u64
1.8.0
[src]

impl<'a> ShlAssign<&'a u16> for u64
1.22.0
[src]

Auto Trait Implementations

impl Send for u64

impl Sync for u64

Blanket Implementations

impl<T> From for T[src]

impl<T, U> TryFrom for T where
    U: Into<T>, 
[src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<T, U> Into for T where
    U: From<T>, 
[src]

impl<T> Borrow for T where
    T: ?Sized
[src]

impl<T> BorrowMut for T where
    T: ?Sized
[src]

impl<T> Any for T where
    T: 'static + ?Sized
[src]

impl<T> ToOwned for T where
    T: Clone
[src]

type Owned = T

impl<T> ToString for T where
    T: Display + ?Sized
[src]