24 #include "ns3/boolean.h" 54 { 2, 100, 28, 24, 24},
80 { 2, 100, 28, 24, 24},
93 m_dlEdgeSubBandOffset (0),
94 m_dlEdgeSubBandwidth (0),
95 m_ulEdgeSubBandOffset (0),
96 m_ulEdgeSubBandwidth (0),
127 .AddAttribute (
"UlCommonSubBandwidth",
128 "Uplink Medium (Common) SubBandwidth Configuration in number of Resource Block Groups",
131 MakeUintegerChecker<uint8_t> ())
132 .AddAttribute (
"UlEdgeSubBandOffset",
133 "Uplink Edge SubBand Offset in number of Resource Block Groups",
136 MakeUintegerChecker<uint8_t> ())
137 .AddAttribute (
"UlEdgeSubBandwidth",
138 "Uplink Edge SubBandwidth Configuration in number of Resource Block Groups",
141 MakeUintegerChecker<uint8_t> ())
142 .AddAttribute (
"DlCommonSubBandwidth",
143 "Downlink Medium (Common) SubBandwidth Configuration in number of Resource Block Groups",
146 MakeUintegerChecker<uint8_t> ())
147 .AddAttribute (
"DlEdgeSubBandOffset",
148 "Downlink Edge SubBand Offset in number of Resource Block Groups",
151 MakeUintegerChecker<uint8_t> ())
152 .AddAttribute (
"DlEdgeSubBandwidth",
153 "Downlink Edge SubBandwidth Configuration in number of Resource Block Groups",
156 MakeUintegerChecker<uint8_t> ())
157 .AddAttribute (
"CenterRsrqThreshold",
158 "If the RSRQ of is worse than this threshold, UE should be served in Medium sub-band",
161 MakeUintegerChecker<uint8_t> ())
162 .AddAttribute (
"EdgeRsrqThreshold",
163 "If the RSRQ of is worse than this threshold, UE should be served in Edge sub-band",
166 MakeUintegerChecker<uint8_t> ())
167 .AddAttribute (
"CenterAreaPowerOffset",
168 "PdschConfigDedicated::Pa value for Center Sub-band, default value dB0",
171 MakeUintegerChecker<uint8_t> ())
172 .AddAttribute (
"MediumAreaPowerOffset",
173 "PdschConfigDedicated::Pa value for Medium Sub-band, default value dB0",
176 MakeUintegerChecker<uint8_t> ())
177 .AddAttribute (
"EdgeAreaPowerOffset",
178 "PdschConfigDedicated::Pa value for Edge Sub-band, default value dB0",
181 MakeUintegerChecker<uint8_t> ())
182 .AddAttribute (
"CenterAreaTpc",
183 "TPC value which will be set in DL-DCI for UEs in center area" 184 "Absolute mode is used, default value 1 is mapped to -1 according to" 185 "TS36.213 Table 5.1.1.1-2",
188 MakeUintegerChecker<uint8_t> ())
189 .AddAttribute (
"MediumAreaTpc",
190 "TPC value which will be set in DL-DCI for UEs in medium area" 191 "Absolute mode is used, default value 1 is mapped to -1 according to" 192 "TS36.213 Table 5.1.1.1-2",
195 MakeUintegerChecker<uint8_t> ())
196 .AddAttribute (
"EdgeAreaTpc",
197 "TPC value which will be set in DL-DCI for UEs in edge area" 198 "Absolute mode is used, default value 1 is mapped to -1 according to" 199 "TS36.213 Table 5.1.1.1-2",
202 MakeUintegerChecker<uint8_t> ())
254 NS_LOG_LOGIC (
this <<
" requesting Event A1 measurements" 255 <<
" (threshold = 0" <<
")");
327 "DlCommonSubBandwidth + DlEdgeSubBandOffset higher than DlBandwidth");
331 "(DlCommonSubBandwidth + DlEdgeSubBandOffset+DlEdgeSubBandwidth) higher than DlBandwidth");
364 "UlCommonSubBandwidth + UlEdgeSubBandOffset higher than UlBandwidth");
368 "(UlCommonSubBandwidth + UlEdgeSubBandOffset+UlEdgeSubBandwidth) higher than UlBandwidth");
412 std::map< uint16_t, uint8_t >::iterator it =
m_ues.find (rnti);
413 if (it ==
m_ues.end ())
418 it =
m_ues.find (rnti);
427 bool isCenterUe =
false;
428 bool isMediumUe =
false;
429 bool isEdgeUe =
false;
444 return (isCenterRbg && isCenterUe) || (isMediumRbg && isMediumUe) || (isEdgeRbg && isEdgeUe);
474 std::map< uint16_t, uint8_t >::iterator it =
m_ues.find (rnti);
475 if (it ==
m_ues.end ())
480 it =
m_ues.find (rnti);
489 bool isCenterUe =
false;
490 bool isMediumUe =
false;
491 bool isEdgeUe =
false;
506 return (isCenterRbg && isCenterUe) || (isMediumRbg && isMediumUe) || (isEdgeRbg && isEdgeUe);
513 NS_LOG_WARN (
"Method should not be called, because it is empty");
520 NS_LOG_WARN (
"Method should not be called, because it is empty");
527 NS_LOG_WARN (
"Method should not be called, because it is empty");
550 std::map< uint16_t, uint8_t >::iterator it =
m_ues.find (rnti);
551 if (it ==
m_ues.end ())
582 uint8_t centerSubBandwidth = 0;
583 uint8_t mediumSubBandwidth = 0;
584 uint8_t edgeSubBandwidth = 0;
590 centerSubBandwidth++;
598 mediumSubBandwidth++;
612 minContinuousUlBandwidth =
613 ((centerSubBandwidth > 0 ) && (centerSubBandwidth < minContinuousUlBandwidth)) ? centerSubBandwidth : minContinuousUlBandwidth;
615 minContinuousUlBandwidth =
616 ((mediumSubBandwidth > 0 ) && (mediumSubBandwidth < minContinuousUlBandwidth)) ? mediumSubBandwidth : minContinuousUlBandwidth;
618 minContinuousUlBandwidth =
619 ((edgeSubBandwidth > 0 ) && (edgeSubBandwidth < minContinuousUlBandwidth)) ? edgeSubBandwidth : minContinuousUlBandwidth;
621 NS_LOG_INFO (
"minContinuousUlBandwidth: " << (
int)minContinuousUlBandwidth);
623 return minContinuousUlBandwidth;
632 <<
" RSRP: " << (uint16_t)measResults.
rsrpResult 633 <<
" RSRQ: " << (uint16_t)measResults.
rsrqResult);
636 "CenterSubBandThreshold must be higher than EdgeSubBandThreshold");
645 std::map< uint16_t, uint8_t >::iterator it =
m_ues.find (rnti);
646 if (it ==
m_ues.end ())
651 it =
m_ues.find (rnti);
656 NS_LOG_INFO (
"UE RNTI: " << rnti <<
" will be served in Center sub-band");
668 NS_LOG_INFO (
"UE RNTI: " << rnti <<
" will be served in Edge sub-band");
680 NS_LOG_INFO (
"UE RNTI: " << rnti <<
" will be served in Medium sub-band");
695 NS_LOG_WARN (
"Method should not be called, because it is empty");
enum ns3::LteRrcSap::ThresholdEutra::@63 choice
Threshold enumeration.
Service Access Point (SAP) offered by the Frequency Reuse algorithm instance to the eNodeB RRC instan...
virtual void DoInitialize(void)
Initialize() implementation.
Template for the implementation of the LteFfrRrcSapProvider as a member of an owner class of type C t...
Service Access Point (SAP) offered by the eNodeB RRC instance to the Frequency Reuse algorithm instan...
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by "...
std::vector< bool > m_ulEdgeRbgMap
UL edge RBG map.
std::vector< bool > m_dlCenterRbgMap
DL center RBG map.
#define NS_OBJECT_ENSURE_REGISTERED(type)
Register an Object subclass with the TypeId system.
void InitializeDownlinkRbgMaps()
Initialize downlink RBG maps function.
NS_ASSERT_MSG(false, "Ipv4AddressGenerator::MaskToIndex(): Impossible")
uint8_t m_ulCommonSubBandwidth
UL common subbandwidth.
void InitializeUplinkRbgMaps()
Initialize uplink RBG maps function.
ThresholdEutra threshold1
Threshold for event A1, A2, A4, and A5.
Specifies criteria for triggering of an E-UTRA measurement reporting event.
virtual LteFfrSapProvider * GetLteFfrSapProvider()
Export the "provider" part of the LteFfrSap interface.
uint8_t ulBandwidth
UL bandwidth.
virtual bool DoIsUlRbgAvailableForUe(int i, uint16_t rnti)
Implementation of LteFfrSapProvider::IsUlRbgAvailableForUe.
uint8_t m_ulBandwidth
uplink bandwidth in RBs
uint8_t m_dlEdgeSubBandwidth
DL edge subbandwidth.
uint8_t dlBandwidth
DL bandwidth.
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
virtual void DoRecvLoadInformation(EpcX2Sap::LoadInformationParams params)
DoRecvLoadInformation.
uint8_t m_mediumAreaTpc
medium area tpc
uint8_t dlEdgeSubBandwidth
DL edge subbandwidth.
uint8_t m_edgeSubBandThreshold
edge subband threshold
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO.
virtual void SetLteFfrRrcSapUser(LteFfrRrcSapUser *s)
Set the "user" part of the LteFfrRrcSap interface that this frequency reuse algorithm instance will i...
virtual bool DoIsDlRbgAvailableForUe(int i, uint16_t rnti)
Implementation of LteFfrSapProvider::IsDlRbgAvailableForUe.
enum ns3::LteRrcSap::ReportConfigEutra::@66 triggerQuantity
Trigger type enumeration.
virtual void DoReportUeMeas(uint16_t rnti, LteRrcSap::MeasResults measResults)
Implementation of LteFfrRrcSapProvider::ReportUeMeas.
Reference Signal Received Quality.
uint8_t m_centerSubBandThreshold
center subband threshold
uint8_t dlCommonSubBandwidth
DL common subbandwidth.
virtual uint8_t AddUeMeasReportConfigForFfr(LteRrcSap::ReportConfigEutra reportConfig)=0
Request a certain reporting configuration to be fulfilled by the UEs attached to the eNodeB entity...
uint8_t m_centerAreaTpc
center area tpc
virtual void SetPdschConfigDedicated(uint16_t rnti, LteRrcSap::PdschConfigDedicated pdschConfigDedicated)=0
Instruct the eNodeB RRC entity to perform RrcConnectionReconfiguration to inform UE about new PdschCo...
std::vector< bool > m_ulCenterRbgMap
UL center RBG map.
uint8_t rsrpResult
RSRP result.
Template for the implementation of the LteFfrSapProvider as a member of an owner class of type C to w...
static const struct ns3::FfrSoftDownlinkDefaultConfiguration g_ffrSoftDownlinkDefaultConfiguration[]
the soft downlink default configuration
uint8_t m_centerAreaPowerOffset
center area power offset
virtual uint8_t DoGetTpc(uint16_t rnti)
DoGetTpc for UE.
FfrSoftUplinkDefaultConfiguration structure.
Service Access Point (SAP) offered by the Frequency Reuse algorithm instance to the MAC Scheduler ins...
std::vector< bool > m_ulRbgMap
UL RBG map.
Soft Fractional Frequency Reuse algorithm implementation.
Hold an unsigned integer type.
std::vector< bool > m_dlRbgMap
DL RBG Map.
uint8_t m_edgeAreaTpc
edge area tpc
std::vector< bool > m_dlEdgeRbgMap
DL edge RBG map.
uint8_t ulEdgeSubBandwidth
edge subbandwidth
bool m_enabledInUplink
If true FR algorithm will also work in Uplink.
bool m_needReconfiguration
If true FR algorithm will be reconfigured.
std::vector< bool > m_ulMediumRbgMap
UL medium RBG map.
virtual void DoReportDlCqiInfo(const struct FfMacSchedSapProvider::SchedDlCqiInfoReqParameters ¶ms)
DoReportDlCqiInfo.
uint8_t m_dlCommonSubBandwidth
DL common subbandwidth.
uint8_t m_dlBandwidth
downlink bandwidth in RBs
virtual LteFfrRrcSapProvider * GetLteFfrRrcSapProvider()
Export the "provider" part of the LteFfrRrcSap interface.
enum ns3::LteRrcSap::ReportConfigEutra::@68 reportInterval
Report interval enumeration.
enum ns3::LteRrcSap::ReportConfigEutra::@65 eventId
Event enumeration.
virtual void Reconfigure()
Automatic FR reconfiguration.
LteFfrSapUser * m_ffrSapUser
FFR SAP user.
virtual std::vector< bool > DoGetAvailableUlRbg()
Implementation of LteFfrSapProvider::GetAvailableUlRbg.
uint8_t dlEdgeSubBandOffset
DL edge subband offset.
Every class exported by the ns3 library is enclosed in the ns3 namespace.
The abstract base class of a Frequency Reuse algorithm.
uint8_t m_edgeAreaPowerOffset
edge area power offset
virtual std::vector< bool > DoGetAvailableDlRbg()
Implementation of LteFfrSapProvider::GetAvailableDlRbg.
uint8_t range
Value range used in RSRP/RSRQ threshold.
virtual void DoInitialize()
Initialize() implementation.
std::map< uint16_t, uint8_t > m_ues
UEs.
uint8_t m_ulEdgeSubBandOffset
UL edge subband offset.
virtual ~LteFfrSoftAlgorithm()
Service Access Point (SAP) offered by the eNodeB RRC instance to the Frequency Reuse algorithm instan...
NS_LOG_LOGIC("Net device "<< nd<< " is not bridged")
virtual void DoReportUlCqiInfo(const struct FfMacSchedSapProvider::SchedUlCqiInfoReqParameters ¶ms)
DoReportUlCqiInfo.
Parameters of the SCHED_DL_CQI_INFO_REQ primitive.
uint8_t m_frCellTypeId
FFR cell type ID for automatic configuration.
uint8_t m_measId
The expected measurement identity.
void SetUplinkConfiguration(uint16_t cellId, uint8_t bandwidth)
Set uplink configuration function.
FfrSoftDownlinkDefaultConfiguration structure.
Parameters of the SCHED_UL_CQI_INFO_REQ primitive.
#define NS_LOG_WARN(msg)
Use NS_LOG to output a message of level LOG_WARN.
void SetDownlinkConfiguration(uint16_t cellId, uint8_t bandwidth)
Set downlink configuration function.
virtual void SetLteFfrSapUser(LteFfrSapUser *s)
Set the "user" part of the LteFfrSap interface that this frequency reuse algorithm instance will inte...
int GetRbgSize(int dlbandwidth)
Get RBG size for DL Bandwidth according to table 7.1.6.1-1 of 36.213.
uint8_t ulEdgeSubBandOffset
UL edge subband offset.
virtual void DoDispose()
Destructor implementation.
std::vector< bool > m_dlMediumRbgMap
DL medium RBG map.
uint8_t ulCommonSubBandwidth
UL common subbandwidth.
Event A1: Serving becomes better than absolute threshold.
LteFfrRrcSapProvider * m_ffrRrcSapProvider
FFR RRC SAP provider.
RSRQ is used for the threshold.
uint8_t m_dlEdgeSubBandOffset
DL edge subband offset.
static TypeId GetTypeId()
Get the type ID.
const uint16_t NUM_DOWNLINK_CONFS(sizeof(g_ffrEnhancedDownlinkDefaultConfiguration)/sizeof(FfrEnhancedDownlinkDefaultConfiguration))
LteFfrSapProvider * m_ffrSapProvider
FFR SAP provider.
uint8_t rsrqResult
RSRQ result.
PdschConfigDedicated structure.
static const struct ns3::FfrSoftUplinkDefaultConfiguration g_ffrSoftUplinkDefaultConfiguration[]
the soft uplink default configuration
virtual uint8_t DoGetMinContinuousUlBandwidth()
DoGetMinContinuousUlBandwidth in number of RB.
uint8_t m_ulEdgeSubBandwidth
UL edge subbandwidth.
uint8_t m_mediumAreaPowerOffset
medium area power offset
Ptr< const AttributeAccessor > MakeUintegerAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method...
a unique identifier for an interface.
LteFfrRrcSapUser * m_ffrRrcSapUser
FFR RRC SAP user.
TypeId SetParent(TypeId tid)
Set the parent TypeId.
LteFfrSoftAlgorithm()
Creates a trivial ffr algorithm instance.
const uint16_t NUM_UPLINK_CONFS(sizeof(g_ffrEnhancedUplinkDefaultConfiguration)/sizeof(FfrEnhancedUplinkDefaultConfiguration))