26 #include <ns3/object.h> 27 #include <ns3/spectrum-interference.h> 28 #include <ns3/spectrum-error-model.h> 31 #include <ns3/simulator.h> 32 #include <ns3/packet.h> 34 #include "ns3/radio-bearer-stats-calculator.h" 35 #include <ns3/constant-position-mobility-model.h> 37 #include <ns3/eps-bearer.h> 38 #include <ns3/node-container.h> 39 #include <ns3/mobility-helper.h> 40 #include <ns3/net-device-container.h> 41 #include <ns3/lte-ue-net-device.h> 42 #include <ns3/lte-enb-net-device.h> 43 #include <ns3/lte-ue-rrc.h> 44 #include <ns3/lte-helper.h> 45 #include "ns3/string.h" 46 #include "ns3/double.h" 47 #include <ns3/lte-enb-phy.h> 48 #include <ns3/lte-ue-phy.h> 49 #include <ns3/boolean.h> 57 :
TestSuite (
"lte-fdmt-ff-mac-scheduler", SYSTEM)
59 NS_LOG_INFO (
"creating LenaTestFdMtFfMacSchedulerSuite");
61 bool errorModel =
false;
161 std::ostringstream oss;
162 oss << nUser <<
" UEs, distance " << dist <<
" m";
167 :
TestCase (BuildNameString (nUser, dist)),
170 m_thrRefDl (thrRefDl),
171 m_thrRefUl (thrRefUl),
172 m_errorModelEnabled (errorModelEnabled)
213 mobility.SetMobilityModel (
"ns3::ConstantPositionMobilityModel");
215 mobility.SetMobilityModel (
"ns3::ConstantPositionMobilityModel");
226 lteHelper->
Attach (ueDevs, enbDevs.
Get (0));
236 enbPhy->SetAttribute (
"TxPower",
DoubleValue (30.0));
237 enbPhy->SetAttribute (
"NoiseFigure",
DoubleValue (5.0));
240 for (
int i = 0; i <
m_nUser; i++)
246 uePhy->SetAttribute (
"TxPower",
DoubleValue (23.0));
247 uePhy->SetAttribute (
"NoiseFigure",
DoubleValue (9.0));
251 double statsStartTime = 0.300;
252 double statsDuration = 0.6;
253 double tolerance = 0.1;
254 Simulator::Stop (
Seconds (statsStartTime + statsDuration - 0.000001));
269 std::vector <uint64_t> dlDataRxed;
270 for (
int i = 0; i <
m_nUser; i++)
275 dlDataRxed.push_back (rlcStats->
GetDlRxData (imsi, lcId));
276 NS_LOG_INFO (
"\tUser " << i <<
" imsi " << imsi <<
" bytes rxed " << (
double)dlDataRxed.at (i) <<
" thr " << (double)dlDataRxed.at (i) / statsDuration <<
" ref " <<
m_thrRefDl);
285 for (
int i = 0; i <
m_nUser; i++)
287 double throughput = (double)dlDataRxed.at (i) / statsDuration;
288 if (throughput != 0 && found == 0)
293 else if (throughput != 0 && found == 1)
305 std::vector <uint64_t> ulDataRxed;
306 for (
int i = 0; i <
m_nUser; i++)
312 ulDataRxed.push_back (rlcStats->
GetUlRxData (imsi, lcId));
313 NS_LOG_INFO (
"\tUser " << i <<
" imsi " << imsi <<
" bytes rxed " << (
double)ulDataRxed.at (i) <<
" thr " << (double)ulDataRxed.at (i) / statsDuration <<
" ref " <<
m_thrRefUl);
321 for (
int i = 0; i <
m_nUser; i++)
325 Simulator::Destroy ();
double m_thrRefUl
UL throughput reference.
Ptr< NetDevice > Get(uint32_t i) const
Get the Ptr<NetDevice> stored in this container at a given index.
double m_thrRefDl
DL throughput reference.
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by "...
AttributeValue implementation for Boolean.
NetDeviceContainer InstallEnbDevice(NodeContainer c)
Create a set of eNodeB devices.
Hold variables of type string.
Mobility model for which the current position does not change once it has been set and until it is se...
void Attach(NetDeviceContainer ueDevices)
Enables automatic attachment of a set of UE devices to a suitable cell using Idle mode initial cell s...
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
void EnableRlcTraces(void)
Enable trace sinks for RLC layer.
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO.
uint16_t m_nUser
number of UE nodes
void ActivateDataRadioBearer(NetDeviceContainer ueDevices, EpsBearer bearer)
Activate a Data Radio Bearer on a given UE devices (for LTE-only simulation).
This system test program creates different test cases with a single eNB and several UEs...
void SetSchedulerType(std::string type)
Set the type of scheduler to be used by eNodeB devices.
This class contains the specification of EPS Bearers.
AttributeValue implementation for Time.
void AddTestCase(TestCase *testCase, TestDuration duration=QUICK)
Add an individual child TestCase to this test suite.
uint64_t GetDlRxData(uint64_t imsi, uint8_t lcid)
Gets the number of received downlink data bytes.
holds a vector of ns3::NetDevice pointers
Test suite for LenaFdMtFfMacSchedulerTestCase test case.
bool m_errorModelEnabled
error model enabled?
virtual ~LenaFdMtFfMacSchedulerTestCase()
Ptr< LteEnbPhy > GetPhy(void) const
#define NS_TEST_ASSERT_MSG_EQ_TOL(actual, limit, tol, msg)
Test that actual and expected (limit) values are equal to plus or minus some tolerance and report and...
Ptr< T > GetObject(void) const
Get a pointer to the requested aggregated Object.
Every class exported by the ns3 library is enclosed in the ns3 namespace.
keep track of a set of node pointers.
virtual void DoRun(void)
Implementation to actually run this TestCase.
Ptr< LteUePhy > GetPhy(void) const
Get the Phy.
void SetPosition(const Vector &position)
Ptr< RadioBearerStatsCalculator > GetRlcStats(void)
NetDeviceContainer InstallUeDevice(NodeContainer c)
Create a set of UE devices.
Helper class used to assign positions and mobility models to nodes.
uint64_t GetUlRxData(uint64_t imsi, uint8_t lcid)
Gets the number of received uplink data bytes.
static LenaTestFdMtFfMacSchedulerSuite lenaTestFdMtFfMacSchedulerSuite
Time Seconds(double value)
Construct a Time in the indicated unit.
LenaFdMtFfMacSchedulerTestCase(uint16_t nUser, double dist, double thrRefDl, double thrRefUl, bool errorModelEnabled)
Constructor.
void SetDefault(std::string name, const AttributeValue &value)
LenaTestFdMtFfMacSchedulerSuite()
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
void EnableMacTraces(void)
Enable trace sinks for MAC layer.
static std::string BuildNameString(uint16_t nUser, double dist)
Builds the test name string based on provided parameter values.
double m_dist
distance between the nodes
This class can be used to hold variables of floating point type such as 'double' or 'float'...
void SetAttribute(std::string name, const AttributeValue &value)
Set a single attribute, raising fatal errors if unsuccessful.
The eNodeB device implementation.
The LteUeNetDevice class implements the UE net device.